Honda NSX NA2 1997-2005 (C32B) → Link G5 Voodoo Pro V1 (auto)
Honda NSX NA2 1997-2005 (C32B) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 17: read the Findings page before cutting any wire |
| Size of the job | 60 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-12 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A-25 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-G-7 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-G-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-D-10 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-F-1 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-F-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-B-8 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-B-7 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-B-6 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-B-5 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-D-13 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-D-2 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-A-11 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A-24 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-B-12 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B-11 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-10 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-2 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A-1 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A-2 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A-3 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A-14 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A-15 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A-16 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A-5 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-F-19 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-F-20 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-D-9 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-F-13 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-F-12 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-D-12 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-D-7 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-F-4 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A-8 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A-10 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-22 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-23 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A-9 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A-17 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A-20 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A-21 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-4 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-6 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-7 | G5VOODOOPROV-E-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-D-16 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-D-17 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-D-18 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-D-19 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-D-8 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-D-20 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C-7 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-F-16 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-F-6 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-B-1 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-B-3 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-B-4 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C-4 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C-6 | G5VOODOOPROV-B-B27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-A-12 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W24 | — | 0.5 | OEM-A-14 | — | — | — |
| A10 | Ignition 4 | — | W18 | — | 0.5 | OEM-B-11 | — | — | — |
| A11 | Ignition 3 | — | W17 | — | 0.5 | OEM-B-12 | — | — | — |
| A12 | Ignition 2 | — | W16 | — | 0.5 | OEM-A-24 | — | — | — |
| A13 | Ignition 1 | — | W15 | — | 0.5 | OEM-A-11 | — | — | — |
| A14 | Analogue Volt 4 | — | W33 | — | 0.5 | OEM-D-12 | — | — | — |
| A15 | Analogue Temp 1 | — | W34 | — | 0.5 | OEM-D-7 | — | — | — |
| A16 | Analogue Temp 2 | — | W51 | — | 0.5 | OEM-D-8 | — | — | — |
| A17 | Analogue Volt 1 | — | W30 | — | 0.5 | OEM-D-9 | — | — | — |
| A18 | Aux 4 | — | W35 | — | 0.5 | OEM-F-4 | — | — | — |
| A19 | Aux 3 | — | W29 | — | 0.5 | OEM-F-20 | — | — | — |
| A2 | Injection 3 | — | W23 | — | 0.5 | OEM-A-3 | — | — | — |
| A20 | Aux 2 | — | W28 | — | 0.5 | OEM-F-19 | — | — | — |
| A21 | Aux 1 | — | W27 | — | 0.5 | OEM-A-5 | — | — | — |
| A22 | Analogue Volt 2 | — | W31 | — | 0.5 | OEM-F-13 | — | — | — |
| A23 | Digital Input 3 | — | W53 | — | 0.5 | OEM-C-7 | — | — | — |
| A26 | Aux 8 | — | W41 | — | 0.5 | OEM-A-17 | — | — | — |
| A27 | Aux 7 | — | W40 | — | 0.5 | OEM-A-9 | — | — | — |
| A28 | Aux 6 | — | W39 | — | 0.5 | OEM-A-23 | — | — | — |
| A29 | Aux 5 | — | W38 | — | 0.5 | OEM-A-22 | — | — | — |
| A3 | Injection 2 | — | W22 | — | 0.5 | OEM-A-2 | — | — | — |
| A30 | Digital Input 1 | — | W10 | — | 0.5 | OEM-B-7 | — | — | — |
| A31 | Digital Input 2 | — | W12 | — | 0.5 | OEM-B-5 | — | — | — |
| A32 | +5V Out | — | W8 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W32 | — | 0.5 | OEM-F-12 | — | — | — |
| A4 | Injection 1 | — | W21 | — | 0.5 | OEM-A-1 | — | — | — |
| A6 | Ignition Switch | — | — | — | — | — | — | — | — |
| A8 | Trigger 1 | — | W9 | — | 0.5 | OEM-B-8 | — | — | — |
| A9 | Trigger 2 | — | W11 | — | 0.5 | OEM-B-6 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W43 | — | 0.5 | OEM-A-21 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W20 | — | 0.5 | OEM-B-2 | — | — | — |
| B13 | Ignition 5 | — | W19 | — | 0.5 | OEM-B-10 | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W48 | — | 0.5 | OEM-D-17 | — | — | — |
| B16 | Analogue Volt 7 | — | W49 | — | 0.5 | OEM-D-18 | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W56 | — | 0.5 | OEM-B-1 | — | — | — |
| B2 | Injection 7 | — | W42 | — | 0.5 | OEM-A-20 | — | — | — |
| B20 | Digital Input 5 | — | W55 | — | 0.5 | OEM-F-6 | — | — | — |
| B21 | Digital Input 4 | — | W54 | — | 0.5 | OEM-F-16 | — | — | — |
| B23 | Analogue Volt 8 | — | W50 | — | 0.5 | OEM-D-19 | — | — | — |
| B24 | Analogue Volt 9 | — | W52 | — | 0.5 | OEM-D-20 | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | W60 | — | 0.5 | OEM-C-6 | — | — | — |
| B28 | Digital Input 9 | — | W59 | — | 0.5 | OEM-C-4 | — | — | — |
| B29 | Digital Input 8 | — | W58 | — | 0.5 | OEM-B-4 | — | — | — |
| B3 | Injection 6 | — | W26 | — | 0.5 | OEM-A-16 | — | — | — |
| B30 | Digital Input 7 | — | W57 | — | 0.5 | OEM-B-3 | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | W47 | — | 0.5 | OEM-D-16 | — | — | — |
| B4 | Injection 5 | — | W25 | — | 0.5 | OEM-A-15 | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W14 | — | 0.5 | OEM-D-2 | — | — | — |
| B9 | Knock 1 | — | W13 | — | 0.5 | OEM-D-13 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W36 | — | 0.5 | OEM-A-8 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | W46 | — | 0.5 | OEM-A-7 | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W37 | — | 0.5 | OEM-A-10 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | W45 | — | 0.5 | OEM-A-6 | — | — | — |
| E4 | Injection 9 | — | W44 | — | 0.5 | OEM-A-4 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 (INJ1) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 10 | Rear secondary O2 heater (RSO2SHTC) | — | W37 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 11 | Ignition coil 1 (IGN COIL1) | — | W15 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 12 | Power ground (PG1) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 13 | ECM power source (IGP1) | — | — | — | — | — | — | — | — |
| 14 | Injector 4 (INJ4) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 15 | Injector 5 (INJ5) | — | W25 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 16 | Injector 6 (INJ6) | — | W26 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 17 | EVAP bypass solenoid (2WBS) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 2 | Injector 2 (INJ2) | — | W22 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 20 | IAB control solenoid (IABCS) | — | W42 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 21 | EVAP purge control solenoid (PCS) | — | W43 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 22 | Front primary O2 heater (FPO2SHTC) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 23 | Rear primary O2 heater (RPO2SHTC) | — | W39 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 24 | Ignition coil 2 (IGN COIL2) | — | W16 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 25 | Power ground (PG2) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 26 | Logic ground (LG1) | — | — | — | — | — | — | — | — |
| 3 | Injector 3 (INJ3) | — | W23 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 4 | EVAP canister vent shut valve (VSV) | — | W44 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 5 | Fuel pump relay (FLR1) | — | W27 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 6 | EGR control solenoid (ESOL) | — | W45 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 7 | Malfunction indicator lamp (MIL) | — | W46 | — | 0.5 | G5VOODOOPROV-E-E2 | — | — | — |
| 8 | A/C clutch relay (ACC) | — | W36 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 9 | Front secondary O2 heater (FSO2SHTC) | — | W40 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTEC pressure switch front (VTP SWF) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 10 | Ignition coil 5 (IGN COIL5) | — | W19 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 11 | Ignition coil 4 (IGN COIL4) | — | W18 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 12 | Ignition coil 3 (IGN COIL3) | — | W17 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 13 | Cylinder position sensor 2 return (CYP 2M) | — | — | — | — | — | — | — | — |
| 14 | Cylinder position sensor 1 return (CYP 1M) | — | — | — | — | — | — | — | — |
| 15 | Crank position sensor 2 return (CKP 2M) | — | — | — | — | — | — | — | — |
| 16 | Crank position sensor 1 return (CKP 1M) | — | — | — | — | — | — | — | — |
| 2 | Ignition coil 6 (IGN COIL6) | — | W20 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 3 | VTEC pressure switch rear (VTP SWR) | — | W57 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 4 | Neutral switch (NT SW, M/T) | — | W58 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 5 | Cylinder position sensor 2 + (CYP 2P) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 6 | Cylinder position sensor 1 + (CYP 1P) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 7 | Crank position sensor 2 + (CKP 2P) | — | W10 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 8 | Crank position sensor 1 + (CKP 1P) | — | W9 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 9 | Logic ground (LG2) | — | — | — | — | — | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECM power source (IGP2) | — | — | — | — | — | — | — | — |
| 4 | Clutch switch (MTCLS, M/T) | — | W59 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 6 | Starter switch (STS) | — | W60 | — | 0.5 | G5VOODOOPROV-B-B27 | — | — | — |
| 7 | Vehicle speed sensor (VSS) | — | W53 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 8 | Engine speed pulse (NEP) | — | — | — | — | — | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Backup power (VBU) | — | — | — | — | — | — | — | — |
| 10 | Sensor 5V supply (VCC2) | — | W5 | — | 0.5 | SP-5V1-1 | — | — | — |
| 11 | Sensor ground (SG2) | — | — | — | — | — | — | — | — |
| 12 | Throttle position sensor (TPS) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 13 | Knock sensor front (KSF) | — | W13 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 16 | Front secondary O2 signal (O2S FS) | — | W47 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| 17 | Rear secondary O2 signal (O2S RS) | — | W48 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 18 | Front primary O2 signal (O2S FP) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 19 | Rear primary O2 signal (O2S RP) | — | W50 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
| 2 | Knock sensor rear (KSR) | — | W14 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 20 | EGR valve lift sensor (EGRL) | — | W52 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 4 | K-line diagnostics | — | — | — | — | — | — | — | — |
| 7 | Engine coolant temperature (ECT) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 8 | Intake air temperature (IAT) | — | W51 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 9 | MAP sensor | — | W30 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
OEM-F
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor 5V supply (VCC1) | — | W6 | — | 0.5 | SP-5V1-1 | — | — | — |
| 12 | Accelerator pedal position 2 (AP2) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 13 | Accelerator pedal position 1 (AP1) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 14 | Accelerator pedal 5V supply (VCC3) | — | W7 | — | 0.5 | SP-5V1-1 | — | — | — |
| 15 | Accelerator pedal ground (SG3) | — | — | — | — | — | — | — | — |
| 16 | Brake switch 1 (BKSW1) | — | W54 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 19 | VTEC solenoid front (VT SOLF) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 2 | Sensor ground (SG1) | — | — | — | — | — | — | — | — |
| 20 | VTEC solenoid rear (VT SOLR) | — | W29 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 4 | Fuel pump relay 2 (FLR2) | — | W35 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 6 | Brake switch 2 (BKSW2) | — | W55 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
OEM-G
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Throttle motor common power phases 2&4 (COM2) | — | — | — | — | — | — | — | — |
| 11 | Throttle motor phase 3 (PM3) | — | — | — | — | — | — | — | — |
| 12 | Throttle motor phase 4 (PM4) | — | — | — | — | — | — | — | — |
| 2 | Throttle motor power source 1 (IGM1) | — | — | — | — | — | — | — | — |
| 3 | Throttle motor power source 2 (IGM2) | — | — | — | — | — | — | — | — |
| 4 | Throttle motor phase 1 (PM1) | — | — | — | — | — | — | — | — |
| 5 | Throttle motor phase 2 (PM2) | — | — | — | — | — | — | — | — |
| 7 | Throttle motor ground 1 (PGM1) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | Throttle motor ground 2 (PGM2) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Throttle motor common power phases 1&3 (COM1) | — | — | — | — | — | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.5 | OEM-D-10 | — | — | — |
| 1 | — | — | W6 | — | 0.5 | OEM-F-1 | — | — | — |
| 1 | — | — | W7 | — | 0.5 | OEM-F-14 | — | — | — |
| 1 | — | — | W8 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-12 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-G-7 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-G-8 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Injector 1 (INJ1) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-A-10 | Rear secondary O2 heater (RSO2SHTC) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-A-11 | Ignition coil 1 (IGN COIL1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-A-12 | Power ground (PG1) | ground | — | — | — | single_source | |
| OEM-A-13 | ECM power source (IGP1) | power_in | — | — | — | single_source | |
| OEM-A-14 | Injector 4 (INJ4) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-A-15 | Injector 5 (INJ5) | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-A-16 | Injector 6 (INJ6) | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-A-17 | EVAP bypass solenoid (2WBS) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-A-2 | Injector 2 (INJ2) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source | |
| OEM-A-20 | IAB control solenoid (IABCS) | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-A-21 | EVAP purge control solenoid (PCS) | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-A-22 | Front primary O2 heater (FPO2SHTC) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source | |
| OEM-A-23 | Rear primary O2 heater (RPO2SHTC) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-A-24 | Ignition coil 2 (IGN COIL2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | single_source | |
| OEM-A-25 | Power ground (PG2) | ground | — | — | — | single_source | |
| OEM-A-26 | Logic ground (LG1) | sensor_ground | — | — | — | single_source | |
| OEM-A-3 | Injector 3 (INJ3) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-A-4 | EVAP canister vent shut valve (VSV) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-A-5 | Fuel pump relay (FLR1) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-A-6 | EGR control solenoid (ESOL) | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | single_source | |
| OEM-A-7 | Malfunction indicator lamp (MIL) | low_side_out | G5VOODOOPROV-E-E2 | Injection 11 | injector_out | single_source | |
| OEM-A-8 | A/C clutch relay (ACC) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-A-9 | Front secondary O2 heater (FSO2SHTC) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-B-1 | VTEC pressure switch front (VTP SWF) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-B-10 | Ignition coil 5 (IGN COIL5) | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | single_source | |
| OEM-B-11 | Ignition coil 4 (IGN COIL4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | single_source | |
| OEM-B-12 | Ignition coil 3 (IGN COIL3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | single_source | |
| OEM-B-13 | Cylinder position sensor 2 return (CYP 2M) | sensor_ground | — | — | — | single_source | |
| OEM-B-14 | Cylinder position sensor 1 return (CYP 1M) | sensor_ground | — | — | — | single_source | |
| OEM-B-15 | Crank position sensor 2 return (CKP 2M) | sensor_ground | — | — | — | single_source | |
| OEM-B-16 | Crank position sensor 1 return (CKP 1M) | sensor_ground | — | — | — | single_source | |
| OEM-B-2 | Ignition coil 6 (IGN COIL6) | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | single_source | |
| OEM-B-3 | VTEC pressure switch rear (VTP SWR) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-B-4 | Neutral switch (NT SW, M/T) | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-B-5 | Cylinder position sensor 2 + (CYP 2P) | trigger_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-B-6 | Cylinder position sensor 1 + (CYP 1P) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-B-7 | Crank position sensor 2 + (CKP 2P) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-B-8 | Crank position sensor 1 + (CKP 1P) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-B-9 | Logic ground (LG2) | sensor_ground | — | — | — | single_source | |
| OEM-C-1 | ECM power source (IGP2) | power_in | — | — | — | single_source | |
| OEM-C-4 | Clutch switch (MTCLS, M/T) | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-C-6 | Starter switch (STS) | digital_in | G5VOODOOPROV-B-B27 | Digital Input 10 | digital_in | single_source | |
| OEM-C-7 | Vehicle speed sensor (VSS) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-C-8 | Engine speed pulse (NEP) | tacho_out | — | — | — | single_source | |
| OEM-D-1 | Backup power (VBU) | power_in | — | — | — | single_source | |
| OEM-D-10 | Sensor 5V supply (VCC2) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-D-11 | Sensor ground (SG2) | sensor_ground | — | — | — | single_source | |
| OEM-D-12 | Throttle position sensor (TPS) | analog_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | single_source | |
| OEM-D-13 | Knock sensor front (KSF) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-D-16 | Front secondary O2 signal (O2S FS) | lambda_nb_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | single_source | |
| OEM-D-17 | Rear secondary O2 signal (O2S RS) | lambda_nb_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-D-18 | Front primary O2 signal (O2S FP) | lambda_nb_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-D-19 | Rear primary O2 signal (O2S RP) | lambda_nb_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | single_source | |
| OEM-D-2 | Knock sensor rear (KSR) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | single_source | |
| OEM-D-20 | EGR valve lift sensor (EGRL) | analog_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | single_source | |
| OEM-D-4 | K-line diagnostics | serial | — | — | — | single_source | |
| OEM-D-7 | Engine coolant temperature (ECT) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-D-8 | Intake air temperature (IAT) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-D-9 | MAP sensor | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-F-1 | Sensor 5V supply (VCC1) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-F-12 | Accelerator pedal position 2 (AP2) | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-F-13 | Accelerator pedal position 1 (AP1) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | single_source | |
| OEM-F-14 | Accelerator pedal 5V supply (VCC3) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-F-15 | Accelerator pedal ground (SG3) | sensor_ground | — | — | — | single_source | |
| OEM-F-16 | Brake switch 1 (BKSW1) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-F-19 | VTEC solenoid front (VT SOLF) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-F-2 | Sensor ground (SG1) | sensor_ground | — | — | — | single_source | |
| OEM-F-20 | VTEC solenoid rear (VT SOLR) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-F-4 | Fuel pump relay 2 (FLR2) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-F-6 | Brake switch 2 (BKSW2) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-G-10 | Throttle motor common power phases 2&4 (COM2) | power_in | — | — | — | single_source | |
| OEM-G-11 | Throttle motor phase 3 (PM3) | hbridge_out | — | — | — | single_source | |
| OEM-G-12 | Throttle motor phase 4 (PM4) | hbridge_out | — | — | — | single_source | |
| OEM-G-2 | Throttle motor power source 1 (IGM1) | power_in | — | — | — | single_source | |
| OEM-G-3 | Throttle motor power source 2 (IGM2) | power_in | — | — | — | single_source | |
| OEM-G-4 | Throttle motor phase 1 (PM1) | hbridge_out | — | — | — | single_source | |
| OEM-G-5 | Throttle motor phase 2 (PM2) | hbridge_out | — | — | — | single_source | |
| OEM-G-7 | Throttle motor ground 1 (PGM1) | ground | — | — | — | single_source | |
| OEM-G-8 | Throttle motor ground 2 (PGM2) | ground | — | — | — | single_source | |
| OEM-G-9 | Throttle motor common power phases 1&3 (COM1) | power_in | — | — | — | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-12 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W2 | OEM-A-25 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W3 | OEM-G-7 | SP-GND-1 | 0.85 | no route | Throttle motor ground 1 (PGM1) | — | |
| W4 | OEM-G-8 | SP-GND-1 | 0.85 | no route | Throttle motor ground 2 (PGM2) | — | |
| W5 | OEM-D-10 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VCC2) | — | |
| W6 | OEM-F-1 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VCC1) | — | |
| W7 | OEM-F-14 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCC3) | — | |
| W8 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W9 | OEM-B-8 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position sensor 1 + (CKP 1P) | — | |
| W10 | OEM-B-7 | G5VOODOOPROV-A-A30 | 0.5 | no route | Crank position sensor 2 + (CKP 2P) | — | |
| W11 | OEM-B-6 | G5VOODOOPROV-A-A9 | 0.5 | no route | Cylinder position sensor 1 + (CYP 1P) | — | |
| W12 | OEM-B-5 | G5VOODOOPROV-A-A31 | 0.5 | no route | Cylinder position sensor 2 + (CYP 2P) | — | |
| W13 | OEM-D-13 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor front (KSF) | — | |
| W14 | OEM-D-2 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor rear (KSR) | — | |
| W15 | OEM-A-11 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 (IGN COIL1) | — | |
| W16 | OEM-A-24 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 (IGN COIL2) | — | |
| W17 | OEM-B-12 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 (IGN COIL3) | — | |
| W18 | OEM-B-11 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 (IGN COIL4) | — | |
| W19 | OEM-B-10 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition coil 5 (IGN COIL5) | — | |
| W20 | OEM-B-2 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition coil 6 (IGN COIL6) | — | |
| W21 | OEM-A-1 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W22 | OEM-A-2 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W23 | OEM-A-3 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W24 | OEM-A-14 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W25 | OEM-A-15 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 5 (INJ5) | — | |
| W26 | OEM-A-16 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 6 (INJ6) | — | |
| W27 | OEM-A-5 | G5VOODOOPROV-A-A21 | 0.5 | no route | Fuel pump relay (FLR1) | — | |
| W28 | OEM-F-19 | G5VOODOOPROV-A-A20 | 0.5 | no route | VTEC solenoid front (VT SOLF) | — | |
| W29 | OEM-F-20 | G5VOODOOPROV-A-A19 | 0.5 | no route | VTEC solenoid rear (VT SOLR) | — | |
| W30 | OEM-D-9 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAP sensor | — | |
| W31 | OEM-F-13 | G5VOODOOPROV-A-A22 | 0.5 | no route | Accelerator pedal position 1 (AP1) | — | |
| W32 | OEM-F-12 | G5VOODOOPROV-A-A33 | 0.5 | no route | Accelerator pedal position 2 (AP2) | — | |
| W33 | OEM-D-12 | G5VOODOOPROV-A-A14 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W34 | OEM-D-7 | G5VOODOOPROV-A-A15 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W35 | OEM-F-4 | G5VOODOOPROV-A-A18 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W36 | OEM-A-8 | G5VOODOOPROV-E-E15 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W37 | OEM-A-10 | G5VOODOOPROV-E-E22 | 0.5 | no route | Rear secondary O2 heater (RSO2SHTC) | — | |
| W38 | OEM-A-22 | G5VOODOOPROV-A-A29 | 0.5 | no route | Front primary O2 heater (FPO2SHTC) | — | |
| W39 | OEM-A-23 | G5VOODOOPROV-A-A28 | 0.5 | no route | Rear primary O2 heater (RPO2SHTC) | — | |
| W40 | OEM-A-9 | G5VOODOOPROV-A-A27 | 0.5 | no route | Front secondary O2 heater (FSO2SHTC) | — | |
| W41 | OEM-A-17 | G5VOODOOPROV-A-A26 | 0.5 | no route | EVAP bypass solenoid (2WBS) | — | |
| W42 | OEM-A-20 | G5VOODOOPROV-B-B2 | 0.5 | no route | IAB control solenoid (IABCS) | — | |
| W43 | OEM-A-21 | G5VOODOOPROV-B-B1 | 0.5 | no route | EVAP purge control solenoid (PCS) | — | |
| W44 | OEM-A-4 | G5VOODOOPROV-E-E4 | 0.5 | no route | EVAP canister vent shut valve (VSV) | — | |
| W45 | OEM-A-6 | G5VOODOOPROV-E-E3 | 0.5 | no route | EGR control solenoid (ESOL) | — | |
| W46 | OEM-A-7 | G5VOODOOPROV-E-E2 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W47 | OEM-D-16 | G5VOODOOPROV-B-B33 | 0.5 | no route | Front secondary O2 signal (O2S FS) | — | |
| W48 | OEM-D-17 | G5VOODOOPROV-B-B15 | 0.5 | no route | Rear secondary O2 signal (O2S RS) | — | |
| W49 | OEM-D-18 | G5VOODOOPROV-B-B16 | 0.5 | no route | Front primary O2 signal (O2S FP) | — | |
| W50 | OEM-D-19 | G5VOODOOPROV-B-B23 | 0.5 | no route | Rear primary O2 signal (O2S RP) | — | |
| W51 | OEM-D-8 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W52 | OEM-D-20 | G5VOODOOPROV-B-B24 | 0.5 | no route | EGR valve lift sensor (EGRL) | — | |
| W53 | OEM-C-7 | G5VOODOOPROV-A-A23 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W54 | OEM-F-16 | G5VOODOOPROV-B-B21 | 0.5 | no route | Brake switch 1 (BKSW1) | — | |
| W55 | OEM-F-6 | G5VOODOOPROV-B-B20 | 0.5 | no route | Brake switch 2 (BKSW2) | — | |
| W56 | OEM-B-1 | G5VOODOOPROV-B-B19 | 0.5 | no route | VTEC pressure switch front (VTP SWF) | — | |
| W57 | OEM-B-3 | G5VOODOOPROV-B-B30 | 0.5 | no route | VTEC pressure switch rear (VTP SWR) | — | |
| W58 | OEM-B-4 | G5VOODOOPROV-B-B29 | 0.5 | no route | Neutral switch (NT SW, M/T) | — | |
| W59 | OEM-C-4 | G5VOODOOPROV-B-B28 | 0.5 | no route | Clutch switch (MTCLS, M/T) | — | |
| W60 | OEM-C-6 | G5VOODOOPROV-B-B27 | 0.5 | no route | Starter switch (STS) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (34)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | PHYS_REQUIRED_OPEN | G5VOODOOPROV-A-A6 | G5VOODOOPROV-A-A6 "Ignition Switch" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-A-12 | Required OEM function "Power ground (PG1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-13 | Required OEM function "ECM power source (IGP1)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-25 | Required OEM function "Power ground (PG2)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-26 | Required OEM function "Logic ground (LG1)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B-14 | Required OEM function "Cylinder position sensor 1 return (CYP 1M)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B-16 | Required OEM function "Crank position sensor 1 return (CKP 1M)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B-9 | Required OEM function "Logic ground (LG2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C-1 | Required OEM function "ECM power source (IGP2)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-D-11 | Required OEM function "Sensor ground (SG2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-F-15 | Required OEM function "Accelerator pedal ground (SG3)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-F-2 | Required OEM function "Sensor ground (SG1)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-11 | Required OEM function "Throttle motor phase 3 (PM3)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-12 | Required OEM function "Throttle motor phase 4 (PM4)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-4 | Required OEM function "Throttle motor phase 1 (PM1)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-5 | Required OEM function "Throttle motor phase 2 (PM2)" (hbridge_out) is not connected to the new ECU. |
| warn | DBW_SHARED_5V | G5VOODOOPROV-A-A32 + OEM-D-10 + OEM-F-1 + OEM-F-14 + SP-5V1-1 | These 5 V supplies are separate in the stock car (OEM-D-10 [tps], OEM-F-14 [pedal]) and here share one ECU 5 V (G5VOODOOPROV-A-A32). On a drive-by-wire car the OEM splits them so one short or fault can't corrupt both throttle/pedal tracks at once. G5 Voodoo Pro V1 has 1 5 V sensor supply pin(s). All are in use, so decide: accept the shared supply (and rely on the ECU's DBW fault checks), or add a separate regulated 5 V for the sub tracks. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A18 | G5VOODOOPROV-A-A18 "Aux 4" drives OEM-F-4 Fuel pump relay 2 (FLR2) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-A-5 Fuel pump relay (FLR1) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E15 | G5VOODOOPROV-E-E15 "Aux 13 / WB Heater 1" drives OEM-A-8 A/C clutch relay (ACC) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-B-5 ↔ G5VOODOOPROV-A-A31 | OEM-B-5 "Cylinder position sensor 2 + (CYP 2P)" [trigger_in] is wired to G5VOODOOPROV-A-A31 "Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-B-7 ↔ G5VOODOOPROV-A-A30 | OEM-B-7 "Crank position sensor 2 + (CKP 2P)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | SUPPLY_GROUP | G5VOODOOPROV-A-A32 + OEM-D-10 + OEM-F-1 + OEM-F-14 + SP-5V1-1 | Supplies meant to stay independent share one net: OEM-D-10 [tps], OEM-F-14 [pedal]. The new ECU has no free 5 V reference, so they share one: normal on a standalone, but a short on any of these sensors drops them all. |
| info | NET_FAMILY | OEM-A-17 ↔ G5VOODOOPROV-A-A26 | OEM-A-17 "EVAP bypass solenoid (2WBS)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A-20 ↔ G5VOODOOPROV-B-B2 | OEM-A-20 "IAB control solenoid (IABCS)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-21 ↔ G5VOODOOPROV-B-B1 | OEM-A-21 "EVAP purge control solenoid (PCS)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-22 ↔ G5VOODOOPROV-A-A29 | OEM-A-22 "Front primary O2 heater (FPO2SHTC)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A-23 ↔ G5VOODOOPROV-A-A28 | OEM-A-23 "Rear primary O2 heater (RPO2SHTC)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A-4 ↔ G5VOODOOPROV-E-E4 | OEM-A-4 "EVAP canister vent shut valve (VSV)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-6 ↔ G5VOODOOPROV-E-E3 | OEM-A-6 "EGR control solenoid (ESOL)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-7 ↔ G5VOODOOPROV-E-E2 | OEM-A-7 "Malfunction indicator lamp (MIL)" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-9 ↔ G5VOODOOPROV-A-A27 | OEM-A-9 "Front secondary O2 heater (FSO2SHTC)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 10 optional OEM pins are not mapped: OEM-B-13 Cylinder position sensor 2 return (CYP 2M); OEM-B-15 Crank position sensor 2 return (CKP 2M); OEM-C-8 Engine speed pulse (NEP); OEM-D-4 K-line diagnostics; OEM-G-10 Throttle motor common power phases 2&4 (COM2); OEM-G-2 Throttle motor power source 1 (IGM1); OEM-G-3 Throttle motor power source 2 (IGM2); OEM-G-7 Throttle motor ground 1 (PGM1); OEM-G-8 Throttle motor ground 2 (PGM2); OEM-G-9 Throttle motor common power phases 1&3 (COM1) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-B 14: Cylinder position sensor 1 return (CYP 1M): no rule for class ground_sensor; wire by hand - OEM-B 16: Crank position sensor 1 return (CKP 1M): no rule for class ground_sensor; wire by hand - OEM-G 4: Throttle motor phase 1 (PM1): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 5: Throttle motor phase 2 (PM2): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 11: Throttle motor phase 3 (PM3): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 12: Throttle motor phase 4 (PM4): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-A 13: ECM power source (IGP1): no rule for class ecu_main_power; wire by hand - OEM-A 26: Logic ground (LG1): no rule for class ground_sensor; wire by hand - OEM-B 9: Logic ground (LG2): no rule for class ground_sensor; wire by hand - OEM-C 1: ECM power source (IGP2): no rule for class ecu_main_power; wire by hand - OEM-D 11: Sensor ground (SG2): no rule for class ground_sensor; wire by hand - OEM-F 15: Accelerator pedal ground (SG3): no rule for class ground_sensor; wire by hand - OEM-F 2: Sensor ground (SG1): no rule for class ground_sensor; wire by hand - G5VOODOOPROV-A A6: Ignition Switch: required by Link G5 Voodoo Pro V1 but no stock pin feeds it; wire by hand Not wired: - OEM-D 1: Backup power (VBU): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-C 8: Engine speed pulse (NEP): no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V1 - OEM-D 4: K-line diagnostics: no free k_line on Link G5 Voodoo Pro V1 - OEM-G 2: Throttle motor power source 1 (IGM1): no rule for class switched_feed; wire by hand - OEM-G 9: Throttle motor common power phases 1&3 (COM1): no rule for class switched_feed; wire by hand - OEM-B 13: Cylinder position sensor 2 return (CYP 2M): no rule for class ground_sensor; wire by hand - OEM-B 15: Crank position sensor 2 return (CKP 2M): no rule for class ground_sensor; wire by hand - OEM-G 10: Throttle motor common power phases 2&4 (COM2): no rule for class switched_feed; wire by hand - OEM-G 3: Throttle motor power source 2 (IGM2): no rule for class switched_feed; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | 1997-2005 Acura NSX Service Manual §11 (PGM-FI), ECM terminal arrangement | https://www.manualslib.com/manual/1540331/Acura-Nsx-1997.html | — | — | — |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |