Honda NSX NA2 1997-2005 (C32B) → rusEFI Proteus (auto)
Honda NSX NA2 1997-2005 (C32B) — rusEFI — Proteus
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 5: read the Findings page before cutting any wire |
| Size of the job | 86 wires · 12 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A-12 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A-25 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-G-7 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-G-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A-26 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-13 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-14 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-B-16 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-B-9 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-D-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-F-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-F-2 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-D-10 | PROTEUS-White35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-F-1 | PROTEUS-White35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-F-14 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B-8 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B-7 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B-6 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-B-5 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-D-13 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-D-2 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A-11 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-24 | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-B-12 | PROTEUS-Black35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-B-11 | PROTEUS-Black35-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-B-10 | PROTEUS-Black35-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-B-2 | PROTEUS-Black35-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A-1 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A-2 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A-3 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A-14 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A-15 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A-16 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A-5 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-F-19 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-F-20 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-D-9 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-F-13 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-F-12 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-D-12 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-D-7 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-F-4 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A-8 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-A-10 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-A-22 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-A-23 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-A-9 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-A-17 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-D-16 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-D-17 | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-D-18 | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-D-19 | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-D-8 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-D-20 | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-C-7 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-F-16 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W83 | OEM-F-6 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W84 | OEM-B-1 | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W85 | OEM-B-3 | PROTEUS-White35-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W86 | OEM-B-4 | PROTEUS-White35-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-Black23-23 | PROTEUS-Black23-12 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | PROTEUS-Black23-12 | PROTEUS-White35-10 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | PROTEUS-Black23-12 | PROTEUS-White35-21 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 4 | PROTEUS-Black23-12 | PROTEUS-White35-22 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-Black23-14 | PROTEUS-Black23-23 | open (OL) | power ground must not touch +12 V supply | |
| 6 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 7 | PROTEUS-Black23-14 | PROTEUS-White35-21 | open (OL) | power ground must not touch 5 V sensor reference | |
| 8 | PROTEUS-Black23-14 | PROTEUS-White35-22 | open (OL) | power ground must not touch 5 V sensor reference | |
| 9 | PROTEUS-Black23-23 | PROTEUS-White35-10 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 10 | PROTEUS-Black23-23 | PROTEUS-White35-21 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 11 | PROTEUS-Black23-23 | PROTEUS-White35-22 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 (INJ1) | — | W54 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 10 | Rear secondary O2 heater (RSO2SHTC) | — | W70 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
| 11 | Ignition coil 1 (IGN COIL1) | — | W48 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 12 | Power ground (PG1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 13 | ECM power source (IGP1) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Injector 4 (INJ4) | — | W57 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 15 | Injector 5 (INJ5) | — | W58 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 16 | Injector 6 (INJ6) | — | W59 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 17 | EVAP bypass solenoid (2WBS) | — | W74 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 2 | Injector 2 (INJ2) | — | W55 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| 20 | IAB control solenoid (IABCS) | — | — | — | — | — | — | — | — |
| 21 | EVAP purge control solenoid (PCS) | — | — | — | — | — | — | — | — |
| 22 | Front primary O2 heater (FPO2SHTC) | — | W71 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 23 | Rear primary O2 heater (RPO2SHTC) | — | W72 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 24 | Ignition coil 2 (IGN COIL2) | — | W49 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| 25 | Power ground (PG2) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 26 | Logic ground (LG1) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W56 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 4 | EVAP canister vent shut valve (VSV) | — | — | — | — | — | — | — | — |
| 5 | Fuel pump relay (FLR1) | — | W60 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 6 | EGR control solenoid (ESOL) | — | — | — | — | — | — | — | — |
| 7 | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
| 8 | A/C clutch relay (ACC) | — | W69 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 9 | Front secondary O2 heater (FSO2SHTC) | — | W73 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTEC pressure switch front (VTP SWF) | — | W84 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| 10 | Ignition coil 5 (IGN COIL5) | — | W52 | — | 0.5 | PROTEUS-Black35-32 | — | — | — |
| 11 | Ignition coil 4 (IGN COIL4) | — | W51 | — | 0.5 | PROTEUS-Black35-33 | — | — | — |
| 12 | Ignition coil 3 (IGN COIL3) | — | W50 | — | 0.5 | PROTEUS-Black35-22 | — | — | — |
| 13 | Cylinder position sensor 2 return (CYP 2M) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Cylinder position sensor 1 return (CYP 1M) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Crank position sensor 2 return (CKP 2M) | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Crank position sensor 1 return (CKP 1M) | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Ignition coil 6 (IGN COIL6) | — | W53 | — | 0.5 | PROTEUS-Black35-31 | — | — | — |
| 3 | VTEC pressure switch rear (VTP SWR) | — | W85 | — | 0.5 | PROTEUS-White35-28 | — | — | — |
| 4 | Neutral switch (NT SW, M/T) | — | W86 | — | 0.5 | PROTEUS-White35-18 | — | — | — |
| 5 | Cylinder position sensor 2 + (CYP 2P) | — | W45 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 6 | Cylinder position sensor 1 + (CYP 1P) | — | W43 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 7 | Crank position sensor 2 + (CKP 2P) | — | W42 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 8 | Crank position sensor 1 + (CKP 1P) | — | W40 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 9 | Logic ground (LG2) | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECM power source (IGP2) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Clutch switch (MTCLS, M/T) | — | — | — | — | — | — | — | — |
| 6 | Starter switch (STS) | — | — | — | — | — | — | — | — |
| 7 | Vehicle speed sensor (VSS) | — | W81 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 8 | Engine speed pulse (NEP) | — | — | — | — | — | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Backup power (VBU) | — | — | — | — | — | — | — | — |
| 10 | Sensor 5V supply (VCC2) | — | W37 | — | 0.5 | PROTEUS-White35-21 | — | — | — |
| 11 | Sensor ground (SG2) | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | Throttle position sensor (TPS) | — | W66 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 13 | Knock sensor front (KSF) | — | W46 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 16 | Front secondary O2 signal (O2S FS) | — | W75 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| 17 | Rear secondary O2 signal (O2S RS) | — | W76 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| 18 | Front primary O2 signal (O2S FP) | — | W77 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| 19 | Rear primary O2 signal (O2S RP) | — | W78 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
| 2 | Knock sensor rear (KSR) | — | W47 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 20 | EGR valve lift sensor (EGRL) | — | W80 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
| 4 | K-line diagnostics | — | — | — | — | — | — | — | — |
| 7 | Engine coolant temperature (ECT) | — | W67 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 8 | Intake air temperature (IAT) | — | W79 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 9 | MAP sensor | — | W63 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
OEM-F
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor 5V supply (VCC1) | — | W38 | — | 0.5 | PROTEUS-White35-22 | — | — | — |
| 12 | Accelerator pedal position 2 (AP2) | — | W65 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 13 | Accelerator pedal position 1 (AP1) | — | W64 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 14 | Accelerator pedal 5V supply (VCC3) | — | W39 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| 15 | Accelerator pedal ground (SG3) | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Brake switch 1 (BKSW1) | — | W82 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| 19 | VTEC solenoid front (VT SOLF) | — | W61 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 2 | Sensor ground (SG1) | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | VTEC solenoid rear (VT SOLR) | — | W62 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 4 | Fuel pump relay 2 (FLR2) | — | W68 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 6 | Brake switch 2 (BKSW2) | — | W83 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
OEM-G
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Throttle motor common power phases 2&4 (COM2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 11 | Throttle motor phase 3 (PM3) | — | — | — | — | — | — | — | — |
| 12 | Throttle motor phase 4 (PM4) | — | — | — | — | — | — | — | — |
| 2 | Throttle motor power source 1 (IGM1) | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Throttle motor power source 2 (IGM2) | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Throttle motor phase 1 (PM1) | — | — | — | — | — | — | — | — |
| 5 | Throttle motor phase 2 (PM2) | — | — | — | — | — | — | — | — |
| 7 | Throttle motor ground 1 (PGM1) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | Throttle motor ground 2 (PGM2) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Throttle motor common power phases 1&3 (COM1) | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W45 | — | 0.5 | OEM-B-5 | — | — | — |
| 10 | Digital 1 | — | W81 | — | 0.5 | OEM-C-7 | — | — | — |
| 11 | Digital 6 | — | W84 | — | 0.5 | OEM-B-1 | — | — | — |
| 12 | VR 2 negative | — | W44 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W41 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | — | — | — | — | — | — | — |
| 19 | Power ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W42 | — | 0.5 | OEM-B-7 | — | — | — |
| 20 | Power ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W7 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W82 | — | 0.5 | OEM-F-16 | — | — | — |
| 4 | VR 2 positive | — | W43 | — | 0.5 | OEM-B-6 | — | — | — |
| 5 | VR 1 positive | — | W40 | — | 0.5 | OEM-B-8 | — | — | — |
| 6 | ETB 1 negative | — | — | — | — | — | — | — | — |
| 7 | ETB 1 positive | — | — | — | — | — | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W83 | — | 0.5 | OEM-F-6 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W68 | — | 0.5 | OEM-F-4 | — | — | — |
| 11 | Lowside 14 | — | W69 | — | 0.5 | OEM-A-8 | — | — | — |
| 12 | Lowside 15 | — | W70 | — | 0.5 | OEM-A-10 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W55 | — | 0.5 | OEM-A-2 | — | — | — |
| 16 | Injector 4 | — | W57 | — | 0.5 | OEM-A-14 | — | — | — |
| 17 | Power ground | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W73 | — | 0.5 | OEM-A-9 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W60 | — | 0.5 | OEM-A-5 | — | — | — |
| 21 | Lowside 12 | — | W62 | — | 0.5 | OEM-F-20 | — | — | — |
| 22 | Ignition 3 | — | W50 | — | 0.5 | OEM-B-12 | — | — | — |
| 23 | Lowside 16 | — | W71 | — | 0.5 | OEM-A-22 | — | — | — |
| 24 | Power ground | — | W17 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W54 | — | 0.5 | OEM-A-1 | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | W53 | — | 0.5 | OEM-B-2 | — | — | — |
| 32 | Ignition 5 | — | W52 | — | 0.5 | OEM-B-10 | — | — | — |
| 33 | Ignition 4 | — | W51 | — | 0.5 | OEM-B-11 | — | — | — |
| 34 | Ignition 2 | — | W49 | — | 0.5 | OEM-A-24 | — | — | — |
| 35 | Ignition 1 | — | W48 | — | 0.5 | OEM-A-11 | — | — | — |
| 4 | Injector 3 | — | W56 | — | 0.5 | OEM-A-3 | — | — | — |
| 5 | Injector 5 | — | W58 | — | 0.5 | OEM-A-15 | — | — | — |
| 6 | Injector 6 | — | W59 | — | 0.5 | OEM-A-16 | — | — | — |
| 7 | Injector 7 | — | W72 | — | 0.5 | OEM-A-23 | — | — | — |
| 8 | Injector 9 | — | W74 | — | 0.5 | OEM-A-17 | — | — | — |
| 9 | Lowside 11 | — | W61 | — | 0.5 | OEM-F-19 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W39 | — | 0.5 | OEM-F-14 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W63 | — | 0.5 | OEM-D-9 | — | — | — |
| 14 | Analog Volt 3 | — | W65 | — | 0.5 | OEM-F-12 | — | — | — |
| 15 | Analog Volt 5 | — | W75 | — | 0.5 | OEM-D-16 | — | — | — |
| 16 | Analog Volt 7 | — | W77 | — | 0.5 | OEM-D-18 | — | — | — |
| 17 | Analog Volt 9 | — | W80 | — | 0.5 | OEM-D-20 | — | — | — |
| 18 | Analog Volt 11 | — | W86 | — | 0.5 | OEM-B-4 | — | — | — |
| 19 | Thermistor 1 | — | — | — | — | — | — | — | — |
| 2 | Sensor ground | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W67 | — | 0.5 | OEM-D-7 | — | — | — |
| 21 | 5V supply #1 | — | W37 | — | 0.5 | OEM-D-10 | — | — | — |
| 22 | 5V supply #2 | — | W38 | — | 0.5 | OEM-F-1 | — | — | — |
| 23 | Sensor ground | — | W29 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W64 | — | 0.5 | OEM-F-13 | — | — | — |
| 25 | Analog Volt 4 | — | W66 | — | 0.5 | OEM-D-12 | — | — | — |
| 26 | Analog Volt 6 | — | W76 | — | 0.5 | OEM-D-17 | — | — | — |
| 27 | Analog Volt 8 | — | W78 | — | 0.5 | OEM-D-19 | — | — | — |
| 28 | Analog Volt 10 | — | W85 | — | 0.5 | OEM-B-3 | — | — | — |
| 29 | Sensor ground | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W31 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W79 | — | 0.5 | OEM-D-8 | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W46 | — | 0.5 | OEM-D-13 | — | — | — |
| 35 | Knock 2 | — | W47 | — | 0.5 | OEM-D-2 | — | — | — |
| 4 | Sensor ground | — | W32 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W33 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W34 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W35 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W36 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W18 | — | 0.5 | OEM-A-26 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-B-13 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-B-14 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-B-15 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-B-16 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-B-9 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-D-11 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-F-15 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-F-2 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W34 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W35 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W36 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W41 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W44 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-13 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-G-10 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-G-2 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-G-3 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-G-9 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W8 | — | 0.85 | OEM-A-12 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-G-7 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-G-8 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W16 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W17 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Injector 1 (INJ1) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | single_source | |
| OEM-A-10 | Rear secondary O2 heater (RSO2SHTC) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | single_source | |
| OEM-A-11 | Ignition coil 1 (IGN COIL1) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | single_source | |
| OEM-A-12 | Power ground (PG1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A-13 | ECM power source (IGP1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-A-14 | Injector 4 (INJ4) | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | single_source | |
| OEM-A-15 | Injector 5 (INJ5) | injector_out | PROTEUS-Black35-5 | Injector 5 | injector_out | single_source | |
| OEM-A-16 | Injector 6 (INJ6) | injector_out | PROTEUS-Black35-6 | Injector 6 | injector_out | single_source | |
| OEM-A-17 | EVAP bypass solenoid (2WBS) | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | single_source | |
| OEM-A-2 | Injector 2 (INJ2) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | single_source | |
| OEM-A-20 | IAB control solenoid (IABCS) | low_side_out | — | — | — | single_source | |
| OEM-A-21 | EVAP purge control solenoid (PCS) | low_side_out | — | — | — | single_source | |
| OEM-A-22 | Front primary O2 heater (FPO2SHTC) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | single_source | |
| OEM-A-23 | Rear primary O2 heater (RPO2SHTC) | low_side_out | PROTEUS-Black35-7 | Injector 7 | injector_out | single_source | |
| OEM-A-24 | Ignition coil 2 (IGN COIL2) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | single_source | |
| OEM-A-25 | Power ground (PG2) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A-26 | Logic ground (LG1) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A-3 | Injector 3 (INJ3) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | single_source | |
| OEM-A-4 | EVAP canister vent shut valve (VSV) | low_side_out | — | — | — | single_source | |
| OEM-A-5 | Fuel pump relay (FLR1) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | single_source | |
| OEM-A-6 | EGR control solenoid (ESOL) | low_side_out | — | — | — | single_source | |
| OEM-A-7 | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | single_source | |
| OEM-A-8 | A/C clutch relay (ACC) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | single_source | |
| OEM-A-9 | Front secondary O2 heater (FSO2SHTC) | low_side_out | PROTEUS-Black35-19 | Injector 8 | injector_out | single_source | |
| OEM-B-1 | VTEC pressure switch front (VTP SWF) | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-B-10 | Ignition coil 5 (IGN COIL5) | ignition_out | PROTEUS-Black35-32 | Ignition 5 | ignition_out | single_source | |
| OEM-B-11 | Ignition coil 4 (IGN COIL4) | ignition_out | PROTEUS-Black35-33 | Ignition 4 | ignition_out | single_source | |
| OEM-B-12 | Ignition coil 3 (IGN COIL3) | ignition_out | PROTEUS-Black35-22 | Ignition 3 | ignition_out | single_source | |
| OEM-B-13 | Cylinder position sensor 2 return (CYP 2M) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-B-14 | Cylinder position sensor 1 return (CYP 1M) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-B-15 | Crank position sensor 2 return (CKP 2M) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-B-16 | Crank position sensor 1 return (CKP 1M) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-B-2 | Ignition coil 6 (IGN COIL6) | ignition_out | PROTEUS-Black35-31 | Ignition 6 | ignition_out | single_source | |
| OEM-B-3 | VTEC pressure switch rear (VTP SWR) | digital_in | PROTEUS-White35-28 | Analog Volt 10 | analog_in | single_source | |
| OEM-B-4 | Neutral switch (NT SW, M/T) | digital_in | PROTEUS-White35-18 | Analog Volt 11 | analog_in | single_source | |
| OEM-B-5 | Cylinder position sensor 2 + (CYP 2P) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | single_source | |
| OEM-B-6 | Cylinder position sensor 1 + (CYP 1P) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | single_source | |
| OEM-B-7 | Crank position sensor 2 + (CKP 2P) | trigger_in | PROTEUS-Black23-2 | Digital 3 | digital_in | single_source | |
| OEM-B-8 | Crank position sensor 1 + (CKP 1P) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | single_source | |
| OEM-B-9 | Logic ground (LG2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-C-1 | ECM power source (IGP2) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-C-4 | Clutch switch (MTCLS, M/T) | digital_in | — | — | — | single_source | |
| OEM-C-6 | Starter switch (STS) | digital_in | — | — | — | single_source | |
| OEM-C-7 | Vehicle speed sensor (VSS) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-C-8 | Engine speed pulse (NEP) | tacho_out | — | — | — | single_source | |
| OEM-D-1 | Backup power (VBU) | power_in | — | — | — | single_source | |
| OEM-D-10 | Sensor 5V supply (VCC2) | vref | PROTEUS-White35-21 | 5V supply #1 | vref | single_source | |
| OEM-D-11 | Sensor ground (SG2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-D-12 | Throttle position sensor (TPS) | analog_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | single_source | |
| OEM-D-13 | Knock sensor front (KSF) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | single_source | |
| OEM-D-16 | Front secondary O2 signal (O2S FS) | lambda_nb_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | single_source | |
| OEM-D-17 | Rear secondary O2 signal (O2S RS) | lambda_nb_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | single_source | |
| OEM-D-18 | Front primary O2 signal (O2S FP) | lambda_nb_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | single_source | |
| OEM-D-19 | Rear primary O2 signal (O2S RP) | lambda_nb_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | single_source | |
| OEM-D-2 | Knock sensor rear (KSR) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | single_source | |
| OEM-D-20 | EGR valve lift sensor (EGRL) | analog_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | single_source | |
| OEM-D-4 | K-line diagnostics | serial | — | — | — | single_source | |
| OEM-D-7 | Engine coolant temperature (ECT) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | single_source | |
| OEM-D-8 | Intake air temperature (IAT) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | single_source | |
| OEM-D-9 | MAP sensor | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-F-1 | Sensor 5V supply (VCC1) | vref | PROTEUS-White35-22 | 5V supply #2 | vref | single_source | |
| OEM-F-12 | Accelerator pedal position 2 (AP2) | analog_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-F-13 | Accelerator pedal position 1 (AP1) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | single_source | |
| OEM-F-14 | Accelerator pedal 5V supply (VCC3) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-F-15 | Accelerator pedal ground (SG3) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-F-16 | Brake switch 1 (BKSW1) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-F-19 | VTEC solenoid front (VT SOLF) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | single_source | |
| OEM-F-2 | Sensor ground (SG1) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-F-20 | VTEC solenoid rear (VT SOLR) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | single_source | |
| OEM-F-4 | Fuel pump relay 2 (FLR2) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | single_source | |
| OEM-F-6 | Brake switch 2 (BKSW2) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-G-10 | Throttle motor common power phases 2&4 (COM2) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-G-11 | Throttle motor phase 3 (PM3) | hbridge_out | — | — | — | single_source | |
| OEM-G-12 | Throttle motor phase 4 (PM4) | hbridge_out | — | — | — | single_source | |
| OEM-G-2 | Throttle motor power source 1 (IGM1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-G-3 | Throttle motor power source 2 (IGM2) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-G-4 | Throttle motor phase 1 (PM1) | hbridge_out | — | — | — | single_source | |
| OEM-G-5 | Throttle motor phase 2 (PM2) | hbridge_out | — | — | — | single_source | |
| OEM-G-7 | Throttle motor ground 1 (PGM1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-G-8 | Throttle motor ground 2 (PGM2) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-G-9 | Throttle motor common power phases 1&3 (COM1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | no route | ECM power source (IGP1) | — | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | no route | ECM power source (IGP2) | — | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 2&4 (COM2) | — | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | no route | Throttle motor power source 1 (IGM1) | — | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | no route | Throttle motor power source 2 (IGM2) | — | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 1&3 (COM1) | — | |
| W7 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W8 | OEM-A-12 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W9 | OEM-A-25 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W10 | OEM-G-7 | SP-GND-1 | 0.85 | no route | Throttle motor ground 1 (PGM1) | — | |
| W11 | OEM-G-8 | SP-GND-1 | 0.85 | no route | Throttle motor ground 2 (PGM2) | — | |
| W12 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W13 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W14 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W15 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W16 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W17 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W18 | OEM-A-26 | SP-0V-1 | 0.5 | no route | Logic ground (LG1) | — | |
| W19 | OEM-B-13 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 2 return (CYP 2M) | — | |
| W20 | OEM-B-14 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 1 return (CYP 1M) | — | |
| W21 | OEM-B-15 | SP-0V-1 | 0.5 | no route | Crank position sensor 2 return (CKP 2M) | — | |
| W22 | OEM-B-16 | SP-0V-1 | 0.5 | no route | Crank position sensor 1 return (CKP 1M) | — | |
| W23 | OEM-B-9 | SP-0V-1 | 0.5 | no route | Logic ground (LG2) | — | |
| W24 | OEM-D-11 | SP-0V-1 | 0.5 | no route | Sensor ground (SG2) | — | |
| W25 | OEM-F-15 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (SG3) | — | |
| W26 | OEM-F-2 | SP-0V-1 | 0.5 | no route | Sensor ground (SG1) | — | |
| W27 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W28 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W29 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W30 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W31 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W32 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W33 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W34 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W35 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W36 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W37 | OEM-D-10 | PROTEUS-White35-21 | 0.5 | no route | Sensor 5V supply (VCC2) | — | |
| W38 | OEM-F-1 | PROTEUS-White35-22 | 0.5 | no route | Sensor 5V supply (VCC1) | — | |
| W39 | OEM-F-14 | PROTEUS-White35-10 | 0.5 | no route | Accelerator pedal 5V supply (VCC3) | — | |
| W40 | OEM-B-8 | PROTEUS-Black23-5 | 0.5 | no route | Crank position sensor 1 + (CKP 1P) | — | |
| W41 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W42 | OEM-B-7 | PROTEUS-Black23-2 | 0.5 | no route | Crank position sensor 2 + (CKP 2P) | — | |
| W43 | OEM-B-6 | PROTEUS-Black23-4 | 0.5 | no route | Cylinder position sensor 1 + (CYP 1P) | — | |
| W44 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W45 | OEM-B-5 | PROTEUS-Black23-1 | 0.5 | no route | Cylinder position sensor 2 + (CYP 2P) | — | |
| W46 | OEM-D-13 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor front (KSF) | — | |
| W47 | OEM-D-2 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor rear (KSR) | — | |
| W48 | OEM-A-11 | PROTEUS-Black35-35 | 0.5 | no route | Ignition coil 1 (IGN COIL1) | — | |
| W49 | OEM-A-24 | PROTEUS-Black35-34 | 0.5 | no route | Ignition coil 2 (IGN COIL2) | — | |
| W50 | OEM-B-12 | PROTEUS-Black35-22 | 0.5 | no route | Ignition coil 3 (IGN COIL3) | — | |
| W51 | OEM-B-11 | PROTEUS-Black35-33 | 0.5 | no route | Ignition coil 4 (IGN COIL4) | — | |
| W52 | OEM-B-10 | PROTEUS-Black35-32 | 0.5 | no route | Ignition coil 5 (IGN COIL5) | — | |
| W53 | OEM-B-2 | PROTEUS-Black35-31 | 0.5 | no route | Ignition coil 6 (IGN COIL6) | — | |
| W54 | OEM-A-1 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W55 | OEM-A-2 | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W56 | OEM-A-3 | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W57 | OEM-A-14 | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W58 | OEM-A-15 | PROTEUS-Black35-5 | 0.5 | no route | Injector 5 (INJ5) | — | |
| W59 | OEM-A-16 | PROTEUS-Black35-6 | 0.5 | no route | Injector 6 (INJ6) | — | |
| W60 | OEM-A-5 | PROTEUS-Black35-20 | 0.5 | no route | Fuel pump relay (FLR1) | — | |
| W61 | OEM-F-19 | PROTEUS-Black35-9 | 0.5 | no route | VTEC solenoid front (VT SOLF) | — | |
| W62 | OEM-F-20 | PROTEUS-Black35-21 | 0.5 | no route | VTEC solenoid rear (VT SOLR) | — | |
| W63 | OEM-D-9 | PROTEUS-White35-13 | 0.5 | no route | MAP sensor | — | |
| W64 | OEM-F-13 | PROTEUS-White35-24 | 0.5 | no route | Accelerator pedal position 1 (AP1) | — | |
| W65 | OEM-F-12 | PROTEUS-White35-14 | 0.5 | no route | Accelerator pedal position 2 (AP2) | — | |
| W66 | OEM-D-12 | PROTEUS-White35-25 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W67 | OEM-D-7 | PROTEUS-White35-20 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W68 | OEM-F-4 | PROTEUS-Black35-10 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W69 | OEM-A-8 | PROTEUS-Black35-11 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W70 | OEM-A-10 | PROTEUS-Black35-12 | 0.5 | no route | Rear secondary O2 heater (RSO2SHTC) | — | |
| W71 | OEM-A-22 | PROTEUS-Black35-23 | 0.5 | no route | Front primary O2 heater (FPO2SHTC) | — | |
| W72 | OEM-A-23 | PROTEUS-Black35-7 | 0.5 | no route | Rear primary O2 heater (RPO2SHTC) | — | |
| W73 | OEM-A-9 | PROTEUS-Black35-19 | 0.5 | no route | Front secondary O2 heater (FSO2SHTC) | — | |
| W74 | OEM-A-17 | PROTEUS-Black35-8 | 0.5 | no route | EVAP bypass solenoid (2WBS) | — | |
| W75 | OEM-D-16 | PROTEUS-White35-15 | 0.5 | no route | Front secondary O2 signal (O2S FS) | — | |
| W76 | OEM-D-17 | PROTEUS-White35-26 | 0.5 | no route | Rear secondary O2 signal (O2S RS) | — | |
| W77 | OEM-D-18 | PROTEUS-White35-16 | 0.5 | no route | Front primary O2 signal (O2S FP) | — | |
| W78 | OEM-D-19 | PROTEUS-White35-27 | 0.5 | no route | Rear primary O2 signal (O2S RP) | — | |
| W79 | OEM-D-8 | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W80 | OEM-D-20 | PROTEUS-White35-17 | 0.5 | no route | EGR valve lift sensor (EGRL) | — | |
| W81 | OEM-C-7 | PROTEUS-Black23-10 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W82 | OEM-F-16 | PROTEUS-Black23-3 | 0.5 | no route | Brake switch 1 (BKSW1) | — | |
| W83 | OEM-F-6 | PROTEUS-Black23-9 | 0.5 | no route | Brake switch 2 (BKSW2) | — | |
| W84 | OEM-B-1 | PROTEUS-Black23-11 | 0.5 | no route | VTEC pressure switch front (VTP SWF) | — | |
| W85 | OEM-B-3 | PROTEUS-White35-28 | 0.5 | no route | VTEC pressure switch rear (VTP SWR) | — | |
| W86 | OEM-B-4 | PROTEUS-White35-18 | 0.5 | no route | Neutral switch (NT SW, M/T) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (13)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | REQUIRED_UNMAPPED | OEM-G-11 | Required OEM function "Throttle motor phase 3 (PM3)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-12 | Required OEM function "Throttle motor phase 4 (PM4)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-4 | Required OEM function "Throttle motor phase 1 (PM1)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-5 | Required OEM function "Throttle motor phase 2 (PM2)" (hbridge_out) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-B-3 ↔ PROTEUS-White35-28 | OEM-B-3 "VTEC pressure switch rear (VTP SWR)" [digital_in] is wired to PROTEUS-White35-28 "Analog Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B-4 ↔ PROTEUS-White35-18 | OEM-B-4 "Neutral switch (NT SW, M/T)" [digital_in] is wired to PROTEUS-White35-18 "Analog Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B-7 ↔ PROTEUS-Black23-2 | OEM-B-7 "Crank position sensor 2 + (CKP 2P)" [trigger_in] is wired to PROTEUS-Black23-2 "Digital 3" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-A-17 ↔ PROTEUS-Black35-8 | OEM-A-17 "EVAP bypass solenoid (2WBS)" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-23 ↔ PROTEUS-Black35-7 | OEM-A-23 "Rear primary O2 heater (RPO2SHTC)" [low_side_out] is wired to PROTEUS-Black35-7 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-9 ↔ PROTEUS-Black35-19 | OEM-A-9 "Front secondary O2 heater (FSO2SHTC)" [low_side_out] is wired to PROTEUS-Black35-19 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-13 ↔ PROTEUS-Black23-13 | OEM-B-13 "Cylinder position sensor 2 return (CYP 2M)" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 9 optional OEM pins are not mapped: OEM-A-20 IAB control solenoid (IABCS); OEM-A-21 EVAP purge control solenoid (PCS); OEM-A-4 EVAP canister vent shut valve (VSV); OEM-A-6 EGR control solenoid (ESOL); OEM-A-7 Malfunction indicator lamp (MIL); OEM-C-4 Clutch switch (MTCLS, M/T); OEM-C-6 Starter switch (STS); OEM-C-8 Engine speed pulse (NEP); OEM-D-4 K-line diagnostics |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Honda C32B not found in the ECU's docs (All-Supported-Triggers Honda = CBR600 / K crank 12+1 / K cam 4+1 / J30A2 24+1+1 — no C30A/C32B/NSX) - This car has Honda Type 1A (1997+) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-G 4: Throttle motor phase 1 (PM1): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 5: Throttle motor phase 2 (PM2): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 11: Throttle motor phase 3 (PM3): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 12: Throttle motor phase 4 (PM4): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-D 1: Backup power (VBU): rusEFI Proteus has no battery-constant input; not needed - OEM-A 20: IAB control solenoid (IABCS): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-A 21: EVAP purge control solenoid (PCS): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-A 4: EVAP canister vent shut valve (VSV): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-A 6: EGR control solenoid (ESOL): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-A 7: Malfunction indicator lamp (MIL): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-C 8: Engine speed pulse (NEP): no free tacho/frequency_out/low_side/ls_hs on rusEFI Proteus - OEM-C 4: Clutch switch (MTCLS, M/T): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C 6: Starter switch (STS): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-D 4: K-line diagnostics: no free k_line on rusEFI Proteus - PROTEUS-Black23 18: Ignition switch in: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | 1997-2005 Acura NSX Service Manual §11 (PGM-FI), ECM terminal arrangement | https://www.manualslib.com/manual/1540331/Acura-Nsx-1997.html | — | — | — |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |