Lexus LS400 1998-2000 (1UZ-FE VVT-i) → Link G5 Voodoo Pro V1 (auto)
Lexus LS400 1998-2000 (1UZ-FE VVT-i) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 7: read the Findings page before cutting any wire |
| Size of the job | 56 wires · 9 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E13-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E14-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E13-2 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E14-23 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E14-10 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E13-16 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E13-15 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E14-18 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E14-17 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E14-11 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E14-12 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-E14-13 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-E14-14 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E14-15 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E14-16 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E14-25 | G5VOODOOPROV-B-B11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E14-26 | G5VOODOOPROV-B-B10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E13-5 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E13-6 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E14-1 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E14-2 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-E14-3 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-E14-4 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E14-5 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E14-6 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E14-7 | G5VOODOOPROV-B-B26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E14-8 | G5VOODOOPROV-B-B18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E15-9 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E11-19 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E14-20 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E13-10 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E13-13 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E13-21 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E13-20 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E13-9 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E13-14 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E15-10 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E15-5 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E11-7 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E11-8 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E13-3 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E13-4 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E11-28 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E12-12 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E13-8 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E14-19 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E14-29 | G5VOODOOPROV-E-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E15-6 | G5VOODOOPROV-E-E1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E11-18 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E11-27 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E13-11 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E13-12 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E13-22 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E14-27 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E14-28 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E11-17 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-E13-17 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W21 | — | 0.5 | OEM-E14-2 | — | — | — |
| A10 | Ignition 4 | — | W13 | — | 0.5 | OEM-E14-14 | — | — | — |
| A11 | Ignition 3 | — | W12 | — | 0.5 | OEM-E14-13 | — | — | — |
| A12 | Ignition 2 | — | W11 | — | 0.5 | OEM-E14-12 | — | — | — |
| A13 | Ignition 1 | — | W10 | — | 0.5 | OEM-E14-11 | — | — | — |
| A14 | Analogue Volt 4 | — | W34 | — | 0.5 | OEM-E13-20 | — | — | — |
| A15 | Analogue Temp 1 | — | W36 | — | 0.5 | OEM-E13-14 | — | — | — |
| A16 | Analogue Temp 2 | — | W53 | — | 0.5 | OEM-E13-22 | — | — | — |
| A17 | Analogue Volt 1 | — | W31 | — | 0.5 | OEM-E13-10 | — | — | — |
| A18 | Aux 4 | — | W38 | — | 0.5 | OEM-E15-5 | — | — | — |
| A19 | Aux 3 | — | W37 | — | 0.5 | OEM-E15-10 | — | — | — |
| A2 | Injection 3 | — | W20 | — | 0.5 | OEM-E14-1 | — | — | — |
| A20 | Aux 2 | — | W30 | — | 0.5 | OEM-E14-20 | — | — | — |
| A21 | Aux 1 | — | W29 | — | 0.5 | OEM-E11-19 | — | — | — |
| A22 | Analogue Volt 2 | — | W32 | — | 0.5 | OEM-E13-13 | — | — | — |
| A23 | Digital Input 3 | — | W54 | — | 0.5 | OEM-E14-27 | — | — | — |
| A26 | Aux 8 | — | W44 | — | 0.5 | OEM-E12-12 | — | — | — |
| A27 | Aux 7 | — | W43 | — | 0.5 | OEM-E11-28 | — | — | — |
| A28 | Aux 6 | — | W42 | — | 0.5 | OEM-E13-4 | — | — | — |
| A29 | Aux 5 | — | W41 | — | 0.5 | OEM-E13-3 | — | — | — |
| A3 | Injection 2 | — | W19 | — | 0.5 | OEM-E13-6 | — | — | — |
| A30 | Digital Input 1 | — | W6 | — | 0.5 | OEM-E13-16 | — | — | — |
| A31 | Digital Input 2 | — | W7 | — | 0.5 | OEM-E13-15 | — | — | — |
| A32 | +5V Out | — | W3 | — | 0.5 | OEM-E13-2 | — | — | — |
| A33 | Analogue Volt 3 | — | W33 | — | 0.5 | OEM-E13-21 | — | — | — |
| A4 | Injection 1 | — | W18 | — | 0.5 | OEM-E13-5 | — | — | — |
| A6 | Ignition Switch | — | W28 | — | 0.5 | OEM-E15-9 | — | — | — |
| A8 | Trigger 1 | — | W4 | — | 0.5 | OEM-E14-23 | — | — | — |
| A9 | Trigger 2 | — | W5 | — | 0.5 | OEM-E14-10 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W25 | — | 0.5 | OEM-E14-6 | — | — | — |
| B10 | Ignition 8 | — | W17 | — | 0.5 | OEM-E14-26 | — | — | — |
| B11 | Ignition 7 | — | W16 | — | 0.5 | OEM-E14-25 | — | — | — |
| B12 | Ignition 6 | — | W15 | — | 0.5 | OEM-E14-16 | — | — | — |
| B13 | Ignition 5 | — | W14 | — | 0.5 | OEM-E14-15 | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W49 | — | 0.5 | OEM-E11-18 | — | — | — |
| B16 | Analogue Volt 7 | — | W50 | — | 0.5 | OEM-E11-27 | — | — | — |
| B18 | Aux 9 | — | W27 | — | 0.5 | OEM-E14-8 | — | — | — |
| B19 | Digital Input 6 | — | — | — | — | — | — | — | — |
| B2 | Injection 7 | — | W24 | — | 0.5 | OEM-E14-5 | — | — | — |
| B20 | Digital Input 5 | — | W56 | — | 0.5 | OEM-E11-17 | — | — | — |
| B21 | Digital Input 4 | — | W55 | — | 0.5 | OEM-E14-28 | — | — | — |
| B23 | Analogue Volt 8 | — | W51 | — | 0.5 | OEM-E13-11 | — | — | — |
| B24 | Analogue Volt 9 | — | W52 | — | 0.5 | OEM-E13-12 | — | — | — |
| B26 | Aux 10 | — | W26 | — | 0.5 | OEM-E14-7 | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W23 | — | 0.5 | OEM-E14-4 | — | — | — |
| B30 | Digital Input 7 | — | — | — | — | — | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | W35 | — | 0.5 | OEM-E13-9 | — | — | — |
| B4 | Injection 5 | — | W22 | — | 0.5 | OEM-E14-3 | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W9 | — | 0.5 | OEM-E14-17 | — | — | — |
| B9 | Knock 1 | — | W8 | — | 0.5 | OEM-E14-18 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | W48 | — | 0.5 | OEM-E15-6 | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W39 | — | 0.5 | OEM-E11-7 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | W47 | — | 0.5 | OEM-E14-29 | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W40 | — | 0.5 | OEM-E11-8 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | W46 | — | 0.5 | OEM-E14-19 | — | — | — |
| E4 | Injection 9 | — | W45 | — | 0.5 | OEM-E13-8 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-E11
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 17 | Starter signal (STA) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 18 | O2 sensor signal (bank unconfirmed) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 19 | VVT oil-control valve RH (OCR+) | — | W29 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 27 | O2 sensor signal (bank unconfirmed) | — | W50 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 28 | VVT oil-control valve RH (OCR−) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 5 | Diagnostic test (TC) | — | — | — | — | — | — | — | — |
| 7 | O2 sensor heater (bank unconfirmed) | — | W39 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 8 | O2 sensor heater (bank unconfirmed) | — | W40 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
OEM-E12
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 12 | Throttle magnetic clutch + (CL+) | — | W44 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
OEM-E13
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | MAF signal (VG) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 11 | O2 sensor signal (bank unconfirmed) | — | W51 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
| 12 | O2 sensor signal (bank unconfirmed) | — | W52 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 13 | Throttle position sensor 1 (VTA) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 14 | Engine coolant temp (THW) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 15 | VVT position sensor RH (VVR+) | — | W7 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 16 | VVT position sensor LH (VVL+) | — | W6 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 17 | ECU ground (E1) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | — | — | — | — | — | — | — |
| 19 | MAF ground (EVG) | — | — | — | — | — | — | — | — |
| 2 | +5V sensor reference (VC) | — | W3 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 20 | Throttle position sensor 2 (VTA2) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 21 | Accelerator pedal position 1 (VPA) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 22 | Intake air temp (THA) | — | W53 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 23 | VVT position sensor RH (VVR−) | — | — | — | — | — | — | — | — |
| 24 | VVT position sensor LH (VVL−) | — | — | — | — | — | — | — | — |
| 3 | O2 sensor heater (bank unconfirmed) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 4 | O2 sensor heater (bank unconfirmed) | — | W42 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 5 | Injector 1 (cyl 1) | — | W18 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 6 | Injector 2 (cyl 2) | — | W19 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 8 | Throttle magnetic clutch − (CL−) | — | W45 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 9 | Accelerator pedal position 2 (VPA2) | — | W35 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
OEM-E14
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (cyl 3) | — | W20 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 10 | Camshaft position sensor (G2) | — | W5 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 11 | Ignition coil 1 (IGT1) | — | W10 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 12 | Ignition coil 2 (IGT2) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 13 | Ignition coil 3 (IGT3) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 14 | Ignition coil 4 (IGT4) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 15 | Ignition coil 5 (IGT5) | — | W14 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 16 | Ignition coil 6 (IGT6) | — | W15 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 17 | Knock sensor RH (KNKR) | — | W9 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 18 | Knock sensor LH (KNKL) | — | W8 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 19 | VVT oil-control valve LH (OCV−) | — | W46 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 2 | Injector 4 (cyl 4) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 20 | VVT oil-control valve LH (OCV+) | — | W30 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 21 | Power/injector ground (E01) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank position sensor (NE−) | — | — | — | — | — | — | — | — |
| 23 | Crank position sensor (NE+) | — | W4 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 25 | Ignition coil 7 (IGT7) | — | W16 | — | 0.5 | G5VOODOOPROV-B-B11 | — | — | — |
| 26 | Ignition coil 8 (IGT8) | — | W17 | — | 0.5 | G5VOODOOPROV-B-B10 | — | — | — |
| 27 | Ignition confirmation 1 (IGF1) | — | W54 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 28 | Ignition confirmation 2 (IGF2) | — | W55 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 29 | ACIS induction VSV | — | W47 | — | 0.5 | G5VOODOOPROV-E-E2 | — | — | — |
| 3 | Injector 5 (cyl 5) | — | W22 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 4 | Injector 6 (cyl 6) | — | W23 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 5 | Injector 7 (cyl 7) | — | W24 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 6 | Injector 8 (cyl 8) | — | W25 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 7 | Throttle motor − (M−) | — | W26 | — | 0.5 | G5VOODOOPROV-B-B26 | — | — | — |
| 8 | Throttle motor + (M+) | — | W27 | — | 0.5 | G5VOODOOPROV-B-B18 | — | — | — |
OEM-E15
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (+12V) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (MREL) | — | W37 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 11 | OBD-II / DLC3 data (SIL) | — | — | — | — | — | — | — | — |
| 16 | ECM power (EFI relay +B) | — | — | — | — | — | — | — | — |
| 5 | Fuel pump relay control (FC) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 6 | Check engine light (W) | — | W48 | — | 0.5 | G5VOODOOPROV-E-E1 | — | — | — |
| 7 | ECM power feed (+BM) | — | — | — | — | — | — | — | — |
| 8 | ECM power (EFI relay +B1) | — | — | — | — | — | — | — | — |
| 9 | Ignition switch (+12V) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E13-17 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E14-21 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E11-17 | Starter signal (STA) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | corroborated | |
| OEM-E11-18 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | corroborated | |
| OEM-E11-19 | VVT oil-control valve RH (OCR+) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | corroborated | |
| OEM-E11-27 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | corroborated | |
| OEM-E11-28 | VVT oil-control valve RH (OCR−) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | corroborated | |
| OEM-E11-5 | Diagnostic test (TC) | serial | — | — | — | corroborated | |
| OEM-E11-7 | O2 sensor heater (bank unconfirmed) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | corroborated | |
| OEM-E11-8 | O2 sensor heater (bank unconfirmed) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | corroborated | |
| OEM-E12-12 | Throttle magnetic clutch + (CL+) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | corroborated | |
| OEM-E13-10 | MAF signal (VG) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | corroborated | |
| OEM-E13-11 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | corroborated | |
| OEM-E13-12 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | corroborated | |
| OEM-E13-13 | Throttle position sensor 1 (VTA) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-E13-14 | Engine coolant temp (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | corroborated | |
| OEM-E13-15 | VVT position sensor RH (VVR+) | trigger_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | corroborated | |
| OEM-E13-16 | VVT position sensor LH (VVL+) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-E13-17 | ECU ground (E1) | ground | — | — | — | corroborated | |
| OEM-E13-18 | Sensor ground (E2) | sensor_ground | — | — | — | corroborated | |
| OEM-E13-19 | MAF ground (EVG) | sensor_ground | — | — | — | corroborated | |
| OEM-E13-2 | +5V sensor reference (VC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-E13-20 | Throttle position sensor 2 (VTA2) | analog_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | corroborated | |
| OEM-E13-21 | Accelerator pedal position 1 (VPA) | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | corroborated | |
| OEM-E13-22 | Intake air temp (THA) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | corroborated | |
| OEM-E13-23 | VVT position sensor RH (VVR−) | trigger_in | — | — | — | corroborated | |
| OEM-E13-24 | VVT position sensor LH (VVL−) | trigger_in | — | — | — | corroborated | |
| OEM-E13-3 | O2 sensor heater (bank unconfirmed) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | corroborated | |
| OEM-E13-4 | O2 sensor heater (bank unconfirmed) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | corroborated | |
| OEM-E13-5 | Injector 1 (cyl 1) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | corroborated | |
| OEM-E13-6 | Injector 2 (cyl 2) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | corroborated | |
| OEM-E13-8 | Throttle magnetic clutch − (CL−) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | corroborated | |
| OEM-E13-9 | Accelerator pedal position 2 (VPA2) | analog_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | corroborated | |
| OEM-E14-1 | Injector 3 (cyl 3) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | corroborated | |
| OEM-E14-10 | Camshaft position sensor (G2) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-E14-11 | Ignition coil 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-E14-12 | Ignition coil 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-E14-13 | Ignition coil 3 (IGT3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-E14-14 | Ignition coil 4 (IGT4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | corroborated | |
| OEM-E14-15 | Ignition coil 5 (IGT5) | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | corroborated | |
| OEM-E14-16 | Ignition coil 6 (IGT6) | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | corroborated | |
| OEM-E14-17 | Knock sensor RH (KNKR) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-E14-18 | Knock sensor LH (KNKL) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-E14-19 | VVT oil-control valve LH (OCV−) | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | corroborated | |
| OEM-E14-2 | Injector 4 (cyl 4) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | corroborated | |
| OEM-E14-20 | VVT oil-control valve LH (OCV+) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | corroborated | |
| OEM-E14-21 | Power/injector ground (E01) | ground | — | — | — | corroborated | |
| OEM-E14-22 | Crank position sensor (NE−) | trigger_in | — | — | — | corroborated | |
| OEM-E14-23 | Crank position sensor (NE+) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-E14-25 | Ignition coil 7 (IGT7) | ignition_out | G5VOODOOPROV-B-B11 | Ignition 7 | ignition_out | corroborated | |
| OEM-E14-26 | Ignition coil 8 (IGT8) | ignition_out | G5VOODOOPROV-B-B10 | Ignition 8 | ignition_out | corroborated | |
| OEM-E14-27 | Ignition confirmation 1 (IGF1) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | corroborated | |
| OEM-E14-28 | Ignition confirmation 2 (IGF2) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | corroborated | |
| OEM-E14-29 | ACIS induction VSV | low_side_out | G5VOODOOPROV-E-E2 | Injection 11 | injector_out | corroborated | |
| OEM-E14-3 | Injector 5 (cyl 5) | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | corroborated | |
| OEM-E14-4 | Injector 6 (cyl 6) | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | corroborated | |
| OEM-E14-5 | Injector 7 (cyl 7) | injector_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | corroborated | |
| OEM-E14-6 | Injector 8 (cyl 8) | injector_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | corroborated | |
| OEM-E14-7 | Throttle motor − (M−) | hbridge_out | G5VOODOOPROV-B-B26 | Aux 10 | hbridge_out | corroborated | |
| OEM-E14-8 | Throttle motor + (M+) | hbridge_out | G5VOODOOPROV-B-B18 | Aux 9 | hbridge_out | corroborated | |
| OEM-E15-1 | Battery constant (+12V) | power_in | — | — | — | corroborated | |
| OEM-E15-10 | EFI main relay control (MREL) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | corroborated | |
| OEM-E15-11 | OBD-II / DLC3 data (SIL) | serial | — | — | — | corroborated | |
| OEM-E15-16 | ECM power (EFI relay +B) | power_in | — | — | — | corroborated | |
| OEM-E15-5 | Fuel pump relay control (FC) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | corroborated | |
| OEM-E15-6 | Check engine light (W) | low_side_out | G5VOODOOPROV-E-E1 | Injection 12 | injector_out | corroborated | |
| OEM-E15-7 | ECM power feed (+BM) | power_in | — | — | — | corroborated | |
| OEM-E15-8 | ECM power (EFI relay +B1) | power_in | — | — | — | corroborated | |
| OEM-E15-9 | Ignition switch (+12V) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E13-17 | SP-GND-1 | 0.85 | no route | ECU ground (E1) | — | |
| W2 | OEM-E14-21 | SP-GND-1 | 0.85 | no route | Power/injector ground (E01) | — | |
| W3 | OEM-E13-2 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V sensor reference (VC) | — | |
| W4 | OEM-E14-23 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position sensor (NE+) | — | |
| W5 | OEM-E14-10 | G5VOODOOPROV-A-A9 | 0.5 | no route | Camshaft position sensor (G2) | — | |
| W6 | OEM-E13-16 | G5VOODOOPROV-A-A30 | 0.5 | no route | VVT position sensor LH (VVL+) | — | |
| W7 | OEM-E13-15 | G5VOODOOPROV-A-A31 | 0.5 | no route | VVT position sensor RH (VVR+) | — | |
| W8 | OEM-E14-18 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor LH (KNKL) | — | |
| W9 | OEM-E14-17 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor RH (KNKR) | — | |
| W10 | OEM-E14-11 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W11 | OEM-E14-12 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W12 | OEM-E14-13 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W13 | OEM-E14-14 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W14 | OEM-E14-15 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition coil 5 (IGT5) | — | |
| W15 | OEM-E14-16 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition coil 6 (IGT6) | — | |
| W16 | OEM-E14-25 | G5VOODOOPROV-B-B11 | 0.5 | no route | Ignition coil 7 (IGT7) | — | |
| W17 | OEM-E14-26 | G5VOODOOPROV-B-B10 | 0.5 | no route | Ignition coil 8 (IGT8) | — | |
| W18 | OEM-E13-5 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W19 | OEM-E13-6 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W20 | OEM-E14-1 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W21 | OEM-E14-2 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W22 | OEM-E14-3 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 5 (cyl 5) | — | |
| W23 | OEM-E14-4 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 6 (cyl 6) | — | |
| W24 | OEM-E14-5 | G5VOODOOPROV-B-B2 | 0.5 | no route | Injector 7 (cyl 7) | — | |
| W25 | OEM-E14-6 | G5VOODOOPROV-B-B1 | 0.5 | no route | Injector 8 (cyl 8) | — | |
| W26 | OEM-E14-7 | G5VOODOOPROV-B-B26 | 0.5 | no route | Throttle motor − (M−) | — | |
| W27 | OEM-E14-8 | G5VOODOOPROV-B-B18 | 0.5 | no route | Throttle motor + (M+) | — | |
| W28 | OEM-E15-9 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch (+12V) | — | |
| W29 | OEM-E11-19 | G5VOODOOPROV-A-A21 | 0.5 | no route | VVT oil-control valve RH (OCR+) | — | |
| W30 | OEM-E14-20 | G5VOODOOPROV-A-A20 | 0.5 | no route | VVT oil-control valve LH (OCV+) | — | |
| W31 | OEM-E13-10 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAF signal (VG) | — | |
| W32 | OEM-E13-13 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position sensor 1 (VTA) | — | |
| W33 | OEM-E13-21 | G5VOODOOPROV-A-A33 | 0.5 | no route | Accelerator pedal position 1 (VPA) | — | |
| W34 | OEM-E13-20 | G5VOODOOPROV-A-A14 | 0.5 | no route | Throttle position sensor 2 (VTA2) | — | |
| W35 | OEM-E13-9 | G5VOODOOPROV-B-B33 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W36 | OEM-E13-14 | G5VOODOOPROV-A-A15 | 0.5 | no route | Engine coolant temp (THW) | — | |
| W37 | OEM-E15-10 | G5VOODOOPROV-A-A19 | 0.5 | no route | EFI main relay control (MREL) | — | |
| W38 | OEM-E15-5 | G5VOODOOPROV-A-A18 | 0.5 | no route | Fuel pump relay control (FC) | — | |
| W39 | OEM-E11-7 | G5VOODOOPROV-E-E15 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W40 | OEM-E11-8 | G5VOODOOPROV-E-E22 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W41 | OEM-E13-3 | G5VOODOOPROV-A-A29 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W42 | OEM-E13-4 | G5VOODOOPROV-A-A28 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W43 | OEM-E11-28 | G5VOODOOPROV-A-A27 | 0.5 | no route | VVT oil-control valve RH (OCR−) | — | |
| W44 | OEM-E12-12 | G5VOODOOPROV-A-A26 | 0.5 | no route | Throttle magnetic clutch + (CL+) | — | |
| W45 | OEM-E13-8 | G5VOODOOPROV-E-E4 | 0.5 | no route | Throttle magnetic clutch − (CL−) | — | |
| W46 | OEM-E14-19 | G5VOODOOPROV-E-E3 | 0.5 | no route | VVT oil-control valve LH (OCV−) | — | |
| W47 | OEM-E14-29 | G5VOODOOPROV-E-E2 | 0.5 | no route | ACIS induction VSV | — | |
| W48 | OEM-E15-6 | G5VOODOOPROV-E-E1 | 0.5 | no route | Check engine light (W) | — | |
| W49 | OEM-E11-18 | G5VOODOOPROV-B-B15 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W50 | OEM-E11-27 | G5VOODOOPROV-B-B16 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W51 | OEM-E13-11 | G5VOODOOPROV-B-B23 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W52 | OEM-E13-12 | G5VOODOOPROV-B-B24 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W53 | OEM-E13-22 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temp (THA) | — | |
| W54 | OEM-E14-27 | G5VOODOOPROV-A-A23 | 0.5 | no route | Ignition confirmation 1 (IGF1) | — | |
| W55 | OEM-E14-28 | G5VOODOOPROV-B-B21 | 0.5 | no route | Ignition confirmation 2 (IGF2) | — | |
| W56 | OEM-E11-17 | G5VOODOOPROV-B-B20 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (22)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-E13-17 | Required OEM function "ECU ground (E1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E13-18 | Required OEM function "Sensor ground (E2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E14-21 | Required OEM function "Power/injector ground (E01)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E14-22 | Required OEM function "Crank position sensor (NE−)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E15-16 | Required OEM function "ECM power (EFI relay +B)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E15-7 | Required OEM function "ECM power feed (+BM)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E15-8 | Required OEM function "ECM power (EFI relay +B1)" (power_in) is not connected to the new ECU. |
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B18 | Cannot confirm G5 Voodoo Pro V1 can drive the throttle motor: neither the motor stall current (OEM-E14-8) nor the peak rating of G5VOODOOPROV-B-B18 "Aux 9" is known. |
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B26 | Cannot confirm G5 Voodoo Pro V1 can drive the throttle motor: neither the motor stall current (OEM-E14-7) nor the peak rating of G5VOODOOPROV-B-B26 "Aux 10" is known. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A18 | G5VOODOOPROV-A-A18 "Aux 4" drives OEM-E15-5 Fuel pump relay control (FC) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A19 | G5VOODOOPROV-A-A19 "Aux 3" drives OEM-E15-10 EFI main relay control (MREL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-E13-15 ↔ G5VOODOOPROV-A-A31 | OEM-E13-15 "VVT position sensor RH (VVR+)" [trigger_in] is wired to G5VOODOOPROV-A-A31 "Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-E13-16 ↔ G5VOODOOPROV-A-A30 | OEM-E13-16 "VVT position sensor LH (VVL+)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E11-28 ↔ G5VOODOOPROV-A-A27 | OEM-E11-28 "VVT oil-control valve RH (OCR−)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E12-12 ↔ G5VOODOOPROV-A-A26 | OEM-E12-12 "Throttle magnetic clutch + (CL+)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E13-3 ↔ G5VOODOOPROV-A-A29 | OEM-E13-3 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E13-4 ↔ G5VOODOOPROV-A-A28 | OEM-E13-4 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E13-8 ↔ G5VOODOOPROV-E-E4 | OEM-E13-8 "Throttle magnetic clutch − (CL−)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E14-19 ↔ G5VOODOOPROV-E-E3 | OEM-E14-19 "VVT oil-control valve LH (OCV−)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E14-29 ↔ G5VOODOOPROV-E-E2 | OEM-E14-29 "ACIS induction VSV" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E15-6 ↔ G5VOODOOPROV-E-E1 | OEM-E15-6 "Check engine light (W)" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 5 optional OEM pins are not mapped: OEM-E11-5 Diagnostic test (TC); OEM-E13-19 MAF ground (EVG); OEM-E13-23 VVT position sensor RH (VVR−); OEM-E13-24 VVT position sensor LH (VVL−); OEM-E15-11 OBD-II / DLC3 data (SIL) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E15-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-E14 22: Crank position sensor (NE−): single-ended input on Link G5 Voodoo Pro V1 but no sensor ground to return it to - OEM-E13 24: VVT position sensor LH (VVL−): single-ended input on Link G5 Voodoo Pro V1 but no sensor ground to return it to - OEM-E13 23: VVT position sensor RH (VVR−): single-ended input on Link G5 Voodoo Pro V1 but no sensor ground to return it to - OEM-E13 18: Sensor ground (E2): no rule for class ground_sensor; wire by hand - OEM-E15 16: ECM power (EFI relay +B): no rule for class ecu_main_power; wire by hand - OEM-E15 7: ECM power feed (+BM): no rule for class ecu_main_power; wire by hand - OEM-E15 8: ECM power (EFI relay +B1): no rule for class ecu_main_power; wire by hand Not wired: - OEM-E15 1: Battery constant (+12V): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-E15 11: OBD-II / DLC3 data (SIL): no free k_line on Link G5 Voodoo Pro V1 - OEM-E11 5: Diagnostic test (TC): no free k_line on Link G5 Voodoo Pro V1 - OEM-E13 19: MAF ground (EVG): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 4 | vendor_doc | Toyota 1UZ-FE (VVT-i) engine manual M1UZ | http://www.epicmarine.com/docs/M1UZrm.pdf | — | — | — |
| 3 | community_copy | 1998 Lexus LS400 ECM terminal voltage chart (RM717U translation) | https://www.renrendoc.com/p-59096353.html | — | — | — |