Lexus LS400 1998-2000 (1UZ-FE VVT-i) → rusEFI Proteus (auto)
Lexus LS400 1998-2000 (1UZ-FE VVT-i) — rusEFI — Proteus
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 75 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E13-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E14-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-E13-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E13-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E13-2 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E14-22 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E14-23 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E14-10 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E13-24 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E13-16 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E13-15 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E13-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E14-18 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E14-17 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E14-11 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E14-12 | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E14-13 | PROTEUS-Black35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E14-14 | PROTEUS-Black35-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E14-15 | PROTEUS-Black35-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E14-16 | PROTEUS-Black35-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E14-25 | PROTEUS-Black35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E14-26 | PROTEUS-Black35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E13-5 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E13-6 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E14-1 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E14-2 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E14-3 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E14-4 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E14-5 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E14-6 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E14-7 | PROTEUS-Black23-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E14-8 | PROTEUS-Black23-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E15-9 | PROTEUS-Black23-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E11-19 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E14-20 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E13-10 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E13-13 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E13-21 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E13-20 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E13-9 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-E13-14 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E15-10 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E15-5 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-E11-7 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-E11-8 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-E13-3 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-E13-4 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-E11-18 | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-E11-27 | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-E13-11 | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-E13-12 | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-E13-22 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-E14-27 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-E14-28 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-E11-17 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-Black23-14 | PROTEUS-Black23-23 | open (OL) | power ground must not touch +12 V supply | |
| 2 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | PROTEUS-White35-1 | PROTEUS-Black23-23 | open (OL) | sensor ground must not touch +12 V supply | |
| 4 | PROTEUS-White35-1 | PROTEUS-White35-10 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-White35-10 | PROTEUS-Black23-23 | open (OL) | 5 V sensor reference must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-E11
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 17 | Starter signal (STA) | — | W75 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| 18 | O2 sensor signal (bank unconfirmed) | — | W68 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| 19 | VVT oil-control valve RH (OCR+) | — | W54 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 27 | O2 sensor signal (bank unconfirmed) | — | W69 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| 28 | VVT oil-control valve RH (OCR−) | — | — | — | — | — | — | — | — |
| 5 | Diagnostic test (TC) | — | — | — | — | — | — | — | — |
| 7 | O2 sensor heater (bank unconfirmed) | — | W64 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 8 | O2 sensor heater (bank unconfirmed) | — | W65 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
OEM-E12
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 12 | Throttle magnetic clutch + (CL+) | — | — | — | — | — | — | — | — |
OEM-E13
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | MAF signal (VG) | — | W56 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| 11 | O2 sensor signal (bank unconfirmed) | — | W70 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
| 12 | O2 sensor signal (bank unconfirmed) | — | W71 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
| 13 | Throttle position sensor 1 (VTA) | — | W57 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 14 | Engine coolant temp (THW) | — | W61 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 15 | VVT position sensor RH (VVR+) | — | W31 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 16 | VVT position sensor LH (VVL+) | — | W30 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 17 | ECU ground (E1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | +5V sensor reference (VC) | — | W25 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| 20 | Throttle position sensor 2 (VTA2) | — | W59 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 21 | Accelerator pedal position 1 (VPA) | — | W58 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 22 | Intake air temp (THA) | — | W72 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 23 | VVT position sensor RH (VVR−) | — | W32 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | VVT position sensor LH (VVL−) | — | W29 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
| 3 | O2 sensor heater (bank unconfirmed) | — | W66 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 4 | O2 sensor heater (bank unconfirmed) | — | W67 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 5 | Injector 1 (cyl 1) | — | W43 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 6 | Injector 2 (cyl 2) | — | W44 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| 8 | Throttle magnetic clutch − (CL−) | — | — | — | — | — | — | — | — |
| 9 | Accelerator pedal position 2 (VPA2) | — | W60 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
OEM-E14
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (cyl 3) | — | W45 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 10 | Camshaft position sensor (G2) | — | W28 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 11 | Ignition coil 1 (IGT1) | — | W35 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 12 | Ignition coil 2 (IGT2) | — | W36 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| 13 | Ignition coil 3 (IGT3) | — | W37 | — | 0.5 | PROTEUS-Black35-22 | — | — | — |
| 14 | Ignition coil 4 (IGT4) | — | W38 | — | 0.5 | PROTEUS-Black35-33 | — | — | — |
| 15 | Ignition coil 5 (IGT5) | — | W39 | — | 0.5 | PROTEUS-Black35-32 | — | — | — |
| 16 | Ignition coil 6 (IGT6) | — | W40 | — | 0.5 | PROTEUS-Black35-31 | — | — | — |
| 17 | Knock sensor RH (KNKR) | — | W34 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 18 | Knock sensor LH (KNKL) | — | W33 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 19 | VVT oil-control valve LH (OCV−) | — | — | — | — | — | — | — | — |
| 2 | Injector 4 (cyl 4) | — | W46 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 20 | VVT oil-control valve LH (OCV+) | — | W55 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 21 | Power/injector ground (E01) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank position sensor (NE−) | — | W26 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 23 | Crank position sensor (NE+) | — | W27 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 25 | Ignition coil 7 (IGT7) | — | W41 | — | 0.5 | PROTEUS-Black35-30 | — | — | — |
| 26 | Ignition coil 8 (IGT8) | — | W42 | — | 0.5 | PROTEUS-Black35-29 | — | — | — |
| 27 | Ignition confirmation 1 (IGF1) | — | W73 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 28 | Ignition confirmation 2 (IGF2) | — | W74 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| 29 | ACIS induction VSV | — | — | — | — | — | — | — | — |
| 3 | Injector 5 (cyl 5) | — | W47 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 4 | Injector 6 (cyl 6) | — | W48 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 5 | Injector 7 (cyl 7) | — | W49 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 6 | Injector 8 (cyl 8) | — | W50 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| 7 | Throttle motor − (M−) | — | W51 | — | 0.5 | PROTEUS-Black23-7 | — | — | — |
| 8 | Throttle motor + (M+) | — | W52 | — | 0.5 | PROTEUS-Black23-6 | — | — | — |
OEM-E15
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (+12V) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (MREL) | — | W62 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 11 | OBD-II / DLC3 data (SIL) | — | — | — | — | — | — | — | — |
| 16 | ECM power (EFI relay +B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 5 | Fuel pump relay control (FC) | — | W63 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 6 | Check engine light (W) | — | — | — | — | — | — | — | — |
| 7 | ECM power feed (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | ECM power (EFI relay +B1) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (+12V) | — | W53 | — | 0.5 | PROTEUS-Black23-18 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W28 | — | 0.5 | OEM-E14-10 | — | — | — |
| 10 | Digital 1 | — | W73 | — | 0.5 | OEM-E14-27 | — | — | — |
| 11 | Digital 6 | — | — | — | — | — | — | — | — |
| 12 | VR 2 negative | — | W29 | — | 0.5 | OEM-E13-24 | — | — | — |
| 13 | VR 1 negative | — | W26 | — | 0.5 | OEM-E14-22 | — | — | — |
| 14 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | W53 | — | 0.5 | OEM-E15-9 | — | — | — |
| 19 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W31 | — | 0.5 | OEM-E13-15 | — | — | — |
| 20 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W74 | — | 0.5 | OEM-E14-28 | — | — | — |
| 4 | VR 2 positive | — | W30 | — | 0.5 | OEM-E13-16 | — | — | — |
| 5 | VR 1 positive | — | W27 | — | 0.5 | OEM-E14-23 | — | — | — |
| 6 | ETB 1 negative | — | W52 | — | 0.5 | OEM-E14-8 | — | — | — |
| 7 | ETB 1 positive | — | W51 | — | 0.5 | OEM-E14-7 | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W75 | — | 0.5 | OEM-E11-17 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W63 | — | 0.5 | OEM-E15-5 | — | — | — |
| 11 | Lowside 14 | — | W64 | — | 0.5 | OEM-E11-7 | — | — | — |
| 12 | Lowside 15 | — | W65 | — | 0.5 | OEM-E11-8 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W44 | — | 0.5 | OEM-E13-6 | — | — | — |
| 16 | Injector 4 | — | W46 | — | 0.5 | OEM-E14-2 | — | — | — |
| 17 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W50 | — | 0.5 | OEM-E14-6 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W54 | — | 0.5 | OEM-E11-19 | — | — | — |
| 21 | Lowside 12 | — | W62 | — | 0.5 | OEM-E15-10 | — | — | — |
| 22 | Ignition 3 | — | W37 | — | 0.5 | OEM-E14-13 | — | — | — |
| 23 | Lowside 16 | — | W66 | — | 0.5 | OEM-E13-3 | — | — | — |
| 24 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | W42 | — | 0.5 | OEM-E14-26 | — | — | — |
| 3 | Injector 1 | — | W43 | — | 0.5 | OEM-E13-5 | — | — | — |
| 30 | Ignition 7 | — | W41 | — | 0.5 | OEM-E14-25 | — | — | — |
| 31 | Ignition 6 | — | W40 | — | 0.5 | OEM-E14-16 | — | — | — |
| 32 | Ignition 5 | — | W39 | — | 0.5 | OEM-E14-15 | — | — | — |
| 33 | Ignition 4 | — | W38 | — | 0.5 | OEM-E14-14 | — | — | — |
| 34 | Ignition 2 | — | W36 | — | 0.5 | OEM-E14-12 | — | — | — |
| 35 | Ignition 1 | — | W35 | — | 0.5 | OEM-E14-11 | — | — | — |
| 4 | Injector 3 | — | W45 | — | 0.5 | OEM-E14-1 | — | — | — |
| 5 | Injector 5 | — | W47 | — | 0.5 | OEM-E14-3 | — | — | — |
| 6 | Injector 6 | — | W48 | — | 0.5 | OEM-E14-4 | — | — | — |
| 7 | Injector 7 | — | W49 | — | 0.5 | OEM-E14-5 | — | — | — |
| 8 | Injector 9 | — | W67 | — | 0.5 | OEM-E13-4 | — | — | — |
| 9 | Lowside 11 | — | W55 | — | 0.5 | OEM-E14-20 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W25 | — | 0.5 | OEM-E13-2 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W56 | — | 0.5 | OEM-E13-10 | — | — | — |
| 14 | Analog Volt 3 | — | W58 | — | 0.5 | OEM-E13-21 | — | — | — |
| 15 | Analog Volt 5 | — | W60 | — | 0.5 | OEM-E13-9 | — | — | — |
| 16 | Analog Volt 7 | — | W69 | — | 0.5 | OEM-E11-27 | — | — | — |
| 17 | Analog Volt 9 | — | W71 | — | 0.5 | OEM-E13-12 | — | — | — |
| 18 | Analog Volt 11 | — | — | — | — | — | — | — | — |
| 19 | Thermistor 1 | — | — | — | — | — | — | — | — |
| 2 | Sensor ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W61 | — | 0.5 | OEM-E13-14 | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W57 | — | 0.5 | OEM-E13-13 | — | — | — |
| 25 | Analog Volt 4 | — | W59 | — | 0.5 | OEM-E13-20 | — | — | — |
| 26 | Analog Volt 6 | — | W68 | — | 0.5 | OEM-E11-18 | — | — | — |
| 27 | Analog Volt 8 | — | W70 | — | 0.5 | OEM-E13-11 | — | — | — |
| 28 | Analog Volt 10 | — | — | — | — | — | — | — | — |
| 29 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W72 | — | 0.5 | OEM-E13-22 | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W33 | — | 0.5 | OEM-E14-18 | — | — | — |
| 35 | Knock 2 | — | W34 | — | 0.5 | OEM-E14-17 | — | — | — |
| 4 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-E13-18 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-E13-19 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | OEM-E13-23 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E15-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E15-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-E15-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-E13-17 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-E14-21 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E11-17 | Starter signal (STA) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | corroborated | |
| OEM-E11-18 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | corroborated | |
| OEM-E11-19 | VVT oil-control valve RH (OCR+) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | corroborated | |
| OEM-E11-27 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | corroborated | |
| OEM-E11-28 | VVT oil-control valve RH (OCR−) | low_side_out | — | — | — | corroborated | |
| OEM-E11-5 | Diagnostic test (TC) | serial | — | — | — | corroborated | |
| OEM-E11-7 | O2 sensor heater (bank unconfirmed) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | corroborated | |
| OEM-E11-8 | O2 sensor heater (bank unconfirmed) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | corroborated | |
| OEM-E12-12 | Throttle magnetic clutch + (CL+) | low_side_out | — | — | — | corroborated | |
| OEM-E13-10 | MAF signal (VG) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | corroborated | |
| OEM-E13-11 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | corroborated | |
| OEM-E13-12 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | corroborated | |
| OEM-E13-13 | Throttle position sensor 1 (VTA) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | corroborated | |
| OEM-E13-14 | Engine coolant temp (THW) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | corroborated | |
| OEM-E13-15 | VVT position sensor RH (VVR+) | trigger_in | PROTEUS-Black23-2 | Digital 3 | digital_in | corroborated | |
| OEM-E13-16 | VVT position sensor LH (VVL+) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | corroborated | |
| OEM-E13-17 | ECU ground (E1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-E13-18 | Sensor ground (E2) | sensor_ground | PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground | corroborated | |
| OEM-E13-19 | MAF ground (EVG) | sensor_ground | PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground | corroborated | |
| OEM-E13-2 | +5V sensor reference (VC) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | corroborated | |
| OEM-E13-20 | Throttle position sensor 2 (VTA2) | analog_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | corroborated | |
| OEM-E13-21 | Accelerator pedal position 1 (VPA) | analog_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | corroborated | |
| OEM-E13-22 | Intake air temp (THA) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | corroborated | |
| OEM-E13-23 | VVT position sensor RH (VVR−) | trigger_in | PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground | corroborated | |
| OEM-E13-24 | VVT position sensor LH (VVL−) | trigger_in | PROTEUS-Black23-12 | VR 2 negative | trigger_in | corroborated | |
| OEM-E13-3 | O2 sensor heater (bank unconfirmed) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | corroborated | |
| OEM-E13-4 | O2 sensor heater (bank unconfirmed) | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | corroborated | |
| OEM-E13-5 | Injector 1 (cyl 1) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | corroborated | |
| OEM-E13-6 | Injector 2 (cyl 2) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | corroborated | |
| OEM-E13-8 | Throttle magnetic clutch − (CL−) | low_side_out | — | — | — | corroborated | |
| OEM-E13-9 | Accelerator pedal position 2 (VPA2) | analog_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | corroborated | |
| OEM-E14-1 | Injector 3 (cyl 3) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | corroborated | |
| OEM-E14-10 | Camshaft position sensor (G2) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | corroborated | |
| OEM-E14-11 | Ignition coil 1 (IGT1) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | corroborated | |
| OEM-E14-12 | Ignition coil 2 (IGT2) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | corroborated | |
| OEM-E14-13 | Ignition coil 3 (IGT3) | ignition_out | PROTEUS-Black35-22 | Ignition 3 | ignition_out | corroborated | |
| OEM-E14-14 | Ignition coil 4 (IGT4) | ignition_out | PROTEUS-Black35-33 | Ignition 4 | ignition_out | corroborated | |
| OEM-E14-15 | Ignition coil 5 (IGT5) | ignition_out | PROTEUS-Black35-32 | Ignition 5 | ignition_out | corroborated | |
| OEM-E14-16 | Ignition coil 6 (IGT6) | ignition_out | PROTEUS-Black35-31 | Ignition 6 | ignition_out | corroborated | |
| OEM-E14-17 | Knock sensor RH (KNKR) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | corroborated | |
| OEM-E14-18 | Knock sensor LH (KNKL) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | corroborated | |
| OEM-E14-19 | VVT oil-control valve LH (OCV−) | low_side_out | — | — | — | corroborated | |
| OEM-E14-2 | Injector 4 (cyl 4) | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | corroborated | |
| OEM-E14-20 | VVT oil-control valve LH (OCV+) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | corroborated | |
| OEM-E14-21 | Power/injector ground (E01) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-E14-22 | Crank position sensor (NE−) | trigger_in | PROTEUS-Black23-13 | VR 1 negative | trigger_in | corroborated | |
| OEM-E14-23 | Crank position sensor (NE+) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | corroborated | |
| OEM-E14-25 | Ignition coil 7 (IGT7) | ignition_out | PROTEUS-Black35-30 | Ignition 7 | ignition_out | corroborated | |
| OEM-E14-26 | Ignition coil 8 (IGT8) | ignition_out | PROTEUS-Black35-29 | Ignition 8 | ignition_out | corroborated | |
| OEM-E14-27 | Ignition confirmation 1 (IGF1) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | corroborated | |
| OEM-E14-28 | Ignition confirmation 2 (IGF2) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | corroborated | |
| OEM-E14-29 | ACIS induction VSV | low_side_out | — | — | — | corroborated | |
| OEM-E14-3 | Injector 5 (cyl 5) | injector_out | PROTEUS-Black35-5 | Injector 5 | injector_out | corroborated | |
| OEM-E14-4 | Injector 6 (cyl 6) | injector_out | PROTEUS-Black35-6 | Injector 6 | injector_out | corroborated | |
| OEM-E14-5 | Injector 7 (cyl 7) | injector_out | PROTEUS-Black35-7 | Injector 7 | injector_out | corroborated | |
| OEM-E14-6 | Injector 8 (cyl 8) | injector_out | PROTEUS-Black35-19 | Injector 8 | injector_out | corroborated | |
| OEM-E14-7 | Throttle motor − (M−) | hbridge_out | PROTEUS-Black23-7 | ETB 1 positive | hbridge_out | corroborated | |
| OEM-E14-8 | Throttle motor + (M+) | hbridge_out | PROTEUS-Black23-6 | ETB 1 negative | hbridge_out | corroborated | |
| OEM-E15-1 | Battery constant (+12V) | power_in | — | — | — | corroborated | |
| OEM-E15-10 | EFI main relay control (MREL) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | corroborated | |
| OEM-E15-11 | OBD-II / DLC3 data (SIL) | serial | — | — | — | corroborated | |
| OEM-E15-16 | ECM power (EFI relay +B) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | corroborated | |
| OEM-E15-5 | Fuel pump relay control (FC) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | corroborated | |
| OEM-E15-6 | Check engine light (W) | low_side_out | — | — | — | corroborated | |
| OEM-E15-7 | ECM power feed (+BM) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | corroborated | |
| OEM-E15-8 | ECM power (EFI relay +B1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | corroborated | |
| OEM-E15-9 | Ignition switch (+12V) | digital_in | PROTEUS-Black23-18 | Ignition switch in | digital_in | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B) | — | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | no route | ECM power feed (+BM) | — | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B1) | — | |
| W4 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W5 | OEM-E13-17 | SP-GND-1 | 0.85 | no route | ECU ground (E1) | — | |
| W6 | OEM-E14-21 | SP-GND-1 | 0.85 | no route | Power/injector ground (E01) | — | |
| W7 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W13 | OEM-E13-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W14 | OEM-E13-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W15 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W16 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W17 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W18 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W25 | OEM-E13-2 | PROTEUS-White35-10 | 0.5 | no route | +5V sensor reference (VC) | — | |
| W26 | OEM-E14-22 | PROTEUS-Black23-13 | 0.5 | no route | Crank position sensor (NE−) | — | |
| W27 | OEM-E14-23 | PROTEUS-Black23-5 | 0.5 | no route | Crank position sensor (NE+) | — | |
| W28 | OEM-E14-10 | PROTEUS-Black23-1 | 0.5 | no route | Camshaft position sensor (G2) | — | |
| W29 | OEM-E13-24 | PROTEUS-Black23-12 | 0.5 | no route | VVT position sensor LH (VVL−) | — | |
| W30 | OEM-E13-16 | PROTEUS-Black23-4 | 0.5 | no route | VVT position sensor LH (VVL+) | — | |
| W31 | OEM-E13-15 | PROTEUS-Black23-2 | 0.5 | no route | VVT position sensor RH (VVR+) | — | |
| W32 | OEM-E13-23 | SP-0V-1 | 0.5 | no route | VVT position sensor RH (VVR−) | — | |
| W33 | OEM-E14-18 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor LH (KNKL) | — | |
| W34 | OEM-E14-17 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor RH (KNKR) | — | |
| W35 | OEM-E14-11 | PROTEUS-Black35-35 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W36 | OEM-E14-12 | PROTEUS-Black35-34 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W37 | OEM-E14-13 | PROTEUS-Black35-22 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W38 | OEM-E14-14 | PROTEUS-Black35-33 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W39 | OEM-E14-15 | PROTEUS-Black35-32 | 0.5 | no route | Ignition coil 5 (IGT5) | — | |
| W40 | OEM-E14-16 | PROTEUS-Black35-31 | 0.5 | no route | Ignition coil 6 (IGT6) | — | |
| W41 | OEM-E14-25 | PROTEUS-Black35-30 | 0.5 | no route | Ignition coil 7 (IGT7) | — | |
| W42 | OEM-E14-26 | PROTEUS-Black35-29 | 0.5 | no route | Ignition coil 8 (IGT8) | — | |
| W43 | OEM-E13-5 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W44 | OEM-E13-6 | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W45 | OEM-E14-1 | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W46 | OEM-E14-2 | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W47 | OEM-E14-3 | PROTEUS-Black35-5 | 0.5 | no route | Injector 5 (cyl 5) | — | |
| W48 | OEM-E14-4 | PROTEUS-Black35-6 | 0.5 | no route | Injector 6 (cyl 6) | — | |
| W49 | OEM-E14-5 | PROTEUS-Black35-7 | 0.5 | no route | Injector 7 (cyl 7) | — | |
| W50 | OEM-E14-6 | PROTEUS-Black35-19 | 0.5 | no route | Injector 8 (cyl 8) | — | |
| W51 | OEM-E14-7 | PROTEUS-Black23-7 | 0.5 | no route | Throttle motor − (M−) | — | |
| W52 | OEM-E14-8 | PROTEUS-Black23-6 | 0.5 | no route | Throttle motor + (M+) | — | |
| W53 | OEM-E15-9 | PROTEUS-Black23-18 | 0.5 | no route | Ignition switch (+12V) | — | |
| W54 | OEM-E11-19 | PROTEUS-Black35-20 | 0.5 | no route | VVT oil-control valve RH (OCR+) | — | |
| W55 | OEM-E14-20 | PROTEUS-Black35-9 | 0.5 | no route | VVT oil-control valve LH (OCV+) | — | |
| W56 | OEM-E13-10 | PROTEUS-White35-13 | 0.5 | no route | MAF signal (VG) | — | |
| W57 | OEM-E13-13 | PROTEUS-White35-24 | 0.5 | no route | Throttle position sensor 1 (VTA) | — | |
| W58 | OEM-E13-21 | PROTEUS-White35-14 | 0.5 | no route | Accelerator pedal position 1 (VPA) | — | |
| W59 | OEM-E13-20 | PROTEUS-White35-25 | 0.5 | no route | Throttle position sensor 2 (VTA2) | — | |
| W60 | OEM-E13-9 | PROTEUS-White35-15 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W61 | OEM-E13-14 | PROTEUS-White35-20 | 0.5 | no route | Engine coolant temp (THW) | — | |
| W62 | OEM-E15-10 | PROTEUS-Black35-21 | 0.5 | no route | EFI main relay control (MREL) | — | |
| W63 | OEM-E15-5 | PROTEUS-Black35-10 | 0.5 | no route | Fuel pump relay control (FC) | — | |
| W64 | OEM-E11-7 | PROTEUS-Black35-11 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W65 | OEM-E11-8 | PROTEUS-Black35-12 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W66 | OEM-E13-3 | PROTEUS-Black35-23 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W67 | OEM-E13-4 | PROTEUS-Black35-8 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W68 | OEM-E11-18 | PROTEUS-White35-26 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W69 | OEM-E11-27 | PROTEUS-White35-16 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W70 | OEM-E13-11 | PROTEUS-White35-27 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W71 | OEM-E13-12 | PROTEUS-White35-17 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W72 | OEM-E13-22 | PROTEUS-White35-30 | 0.5 | no route | Intake air temp (THA) | — | |
| W73 | OEM-E14-27 | PROTEUS-Black23-10 | 0.5 | no route | Ignition confirmation 1 (IGF1) | — | |
| W74 | OEM-E14-28 | PROTEUS-Black23-3 | 0.5 | no route | Ignition confirmation 2 (IGF2) | — | |
| W75 | OEM-E11-17 | PROTEUS-Black23-9 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (6)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DBW_MOTOR_CURRENT | PROTEUS-Black23-6 | Cannot confirm Proteus can drive the throttle motor: neither the motor stall current (OEM-E14-8) nor the peak rating of PROTEUS-Black23-6 "ETB 1 negative" is known. |
| warn | DBW_MOTOR_CURRENT | PROTEUS-Black23-7 | Cannot confirm Proteus can drive the throttle motor: neither the motor stall current (OEM-E14-7) nor the peak rating of PROTEUS-Black23-7 "ETB 1 positive" is known. |
| warn | NET_FAMILY | OEM-E13-15 ↔ PROTEUS-Black23-2 | OEM-E13-15 "VVT position sensor RH (VVR+)" [trigger_in] is wired to PROTEUS-Black23-2 "Digital 3" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E13-18 ↔ OEM-E13-23 | OEM-E13-18 "Sensor ground (E2)" [sensor_ground] is wired to OEM-E13-23 "VVT position sensor RH (VVR−)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-E13-4 ↔ PROTEUS-Black35-8 | OEM-E13-4 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-E11-28 VVT oil-control valve RH (OCR−); OEM-E11-5 Diagnostic test (TC); OEM-E12-12 Throttle magnetic clutch + (CL+); OEM-E13-8 Throttle magnetic clutch − (CL−); OEM-E14-19 VVT oil-control valve LH (OCV−); OEM-E14-29 ACIS induction VSV; OEM-E15-11 OBD-II / DLC3 data (SIL); OEM-E15-6 Check engine light (W) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E15-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-E15 1: Battery constant (+12V): rusEFI Proteus has no battery-constant input; not needed - OEM-E11 28: VVT oil-control valve RH (OCR−): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E12 12: Throttle magnetic clutch + (CL+): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E13 8: Throttle magnetic clutch − (CL−): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E14 19: VVT oil-control valve LH (OCV−): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E14 29: ACIS induction VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E15 6: Check engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E15 11: OBD-II / DLC3 data (SIL): no free k_line on rusEFI Proteus - OEM-E11 5: Diagnostic test (TC): no free k_line on rusEFI Proteus
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Toyota 1UZ-FE (VVT-i) engine manual M1UZ | http://www.epicmarine.com/docs/M1UZrm.pdf | — | — | — |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |
| 3 | community_copy | 1998 Lexus LS400 ECM terminal voltage chart (RM717U translation) | https://www.renrendoc.com/p-59096353.html | — | — | — |