Lexus SC400 1992-97 (1UZ-FE non-VVTi) → Link G5 Voodoo Pro V1 (auto)
Lexus SC400 1992-97 (1UZ-FE non-VVTi) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 6: read the Findings page before cutting any wire |
| Size of the job | 50 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-22 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-D-13 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-D-26 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A-11 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C-8 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C-7 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C-6 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C-3 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-C-11 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-C-5 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-C-13 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-D-12 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-D-11 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-D-24 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-D-25 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A-1 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A-4 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A-5 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-4 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-6 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B-7 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-D-19 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-D-20 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-D-17 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-D-8 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-D-7 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-D-6 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-D-5 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B-5 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B-8 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-D-21 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-D-22 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-D-4 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A-17 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-A-6 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B-11 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-B-24 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-16 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-7 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C-2 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C-10 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A-19 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A-9 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-20 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-14 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-2 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-B-19 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-B-20 | G5VOODOOPROV-B-B27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-B-23 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C-1 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G5VOODOOPROV-A-A32 | OEM-A-22 | open (OL) | 5 V sensor reference must not touch power ground |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W15 | — | 0.5 | OEM-D-25 | — | — | — |
| A10 | Ignition 4 | — | — | — | — | — | — | — | — |
| A11 | Ignition 3 | — | — | — | — | — | — | — | — |
| A12 | Ignition 2 | — | W11 | — | 0.5 | OEM-C-13 | — | — | — |
| A13 | Ignition 1 | — | W10 | — | 0.5 | OEM-C-5 | — | — | — |
| A14 | Analogue Volt 4 | — | W36 | — | 0.5 | OEM-B-11 | — | — | — |
| A15 | Analogue Temp 1 | — | W18 | — | 0.5 | OEM-A-5 | — | — | — |
| A16 | Analogue Temp 2 | — | W38 | — | 0.5 | OEM-A-16 | — | — | — |
| A17 | Analogue Volt 1 | — | W17 | — | 0.5 | OEM-A-4 | — | — | — |
| A18 | Aux 4 | — | W24 | — | 0.5 | OEM-D-17 | — | — | — |
| A19 | Aux 3 | — | W21 | — | 0.5 | OEM-B-7 | — | — | — |
| A2 | Injection 3 | — | W14 | — | 0.5 | OEM-D-24 | — | — | — |
| A20 | Aux 2 | — | W20 | — | 0.5 | OEM-B-6 | — | — | — |
| A21 | Aux 1 | — | W19 | — | 0.5 | OEM-B-4 | — | — | — |
| A22 | Analogue Volt 2 | — | W34 | — | 0.5 | OEM-A-17 | — | — | — |
| A23 | Digital Input 3 | — | W41 | — | 0.5 | OEM-C-10 | — | — | — |
| A26 | Aux 8 | — | W28 | — | 0.5 | OEM-D-5 | — | — | — |
| A27 | Aux 7 | — | W27 | — | 0.5 | OEM-D-6 | — | — | — |
| A28 | Aux 6 | — | W26 | — | 0.5 | OEM-D-7 | — | — | — |
| A29 | Aux 5 | — | W25 | — | 0.5 | OEM-D-8 | — | — | — |
| A3 | Injection 2 | — | W13 | — | 0.5 | OEM-D-11 | — | — | — |
| A30 | Digital Input 1 | — | W7 | — | 0.5 | OEM-C-6 | — | — | — |
| A31 | Digital Input 2 | — | W40 | — | 0.5 | OEM-C-2 | — | — | — |
| A32 | +5V Out | — | W4 | — | 0.5 | OEM-A-11 | — | — | — |
| A33 | Analogue Volt 3 | — | W35 | — | 0.5 | OEM-A-6 | — | — | — |
| A4 | Injection 1 | — | W12 | — | 0.5 | OEM-D-12 | — | — | — |
| A6 | Ignition Switch | — | W16 | — | 0.5 | OEM-A-1 | — | — | — |
| A8 | Trigger 1 | — | W5 | — | 0.5 | OEM-C-8 | — | — | — |
| A9 | Trigger 2 | — | W6 | — | 0.5 | OEM-C-7 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W32 | — | 0.5 | OEM-D-22 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | — | — | — | — | — | — | — |
| B13 | Ignition 5 | — | — | — | — | — | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W49 | — | 0.5 | OEM-B-23 | — | — | — |
| B16 | Analogue Volt 7 | — | W50 | — | 0.5 | OEM-C-1 | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W44 | — | 0.5 | OEM-A-20 | — | — | — |
| B2 | Injection 7 | — | W31 | — | 0.5 | OEM-D-21 | — | — | — |
| B20 | Digital Input 5 | — | W43 | — | 0.5 | OEM-A-9 | — | — | — |
| B21 | Digital Input 4 | — | W42 | — | 0.5 | OEM-A-19 | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | W48 | — | 0.5 | OEM-B-20 | — | — | — |
| B28 | Digital Input 9 | — | W47 | — | 0.5 | OEM-B-19 | — | — | — |
| B29 | Digital Input 8 | — | W46 | — | 0.5 | OEM-A-2 | — | — | — |
| B3 | Injection 6 | — | W30 | — | 0.5 | OEM-B-8 | — | — | — |
| B30 | Digital Input 7 | — | W45 | — | 0.5 | OEM-A-14 | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | W37 | — | 0.5 | OEM-B-24 | — | — | — |
| B4 | Injection 5 | — | W29 | — | 0.5 | OEM-B-5 | — | — | — |
| B6 | Analogue Temp 3 | — | W39 | — | 0.5 | OEM-A-7 | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W9 | — | 0.5 | OEM-C-11 | — | — | — |
| B9 | Knock 1 | — | W8 | — | 0.5 | OEM-C-3 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W22 | — | 0.5 | OEM-D-19 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W23 | — | 0.5 | OEM-D-20 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | W33 | — | 0.5 | OEM-D-4 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W16 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 11 | Sensor supply +5V (VC) | — | W4 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 12 | EFI main relay (B+) | — | — | — | — | — | — | — | — |
| 13 | EFI main relay (B1+) | — | — | — | — | — | — | — | — |
| 14 | Neutral start switch (NSW) | — | W45 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 16 | Intake air temperature (THA) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 17 | O2 right front (OXR1) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 18 | Sensor ground (E2) | — | — | — | — | — | — | — | — |
| 19 | Vehicle speed (SPD) | — | W42 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 2 | Starter signal (STA) | — | W46 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 20 | Diagnostic test 2 (TE2) | — | W44 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 22 | Power ground (E1) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Throttle position (VTA1) | — | W17 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 5 | Coolant temperature (THW) | — | W18 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 6 | O2 left front (OXL1) | — | W35 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 7 | EGR temperature sensor | — | W39 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 8 | Knock/shield (KS) | — | — | — | — | — | — | — | — |
| 9 | Diagnostic test 1 (TE1) | — | W43 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 11 | O2 right rear (OXR2) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 19 | Stop light switch (BK) | — | W47 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 20 | A/T kickdown switch (KD) | — | W48 | — | 0.5 | G5VOODOOPROV-B-B27 | — | — | — |
| 23 | A/C request (AC) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 24 | O2 left rear (OXL2) | — | W37 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| 26 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 4 | EFI main relay control (MREL) | — | W19 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 5 | Check-engine lamp (W) | — | W29 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 6 | Fuel pump relay (FPR) | — | W20 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 7 | A/C clutch relay (ACMG) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 8 | Fuel pump control (FC) | — | W30 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | TPS idle switch (IDL) | — | W50 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 10 | Igniter 2 feedback (IGF2) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 11 | Knock sensor 2 (KNK2) | — | W9 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 12 | Check connector VF2 | — | — | — | — | — | — | — | — |
| 13 | Ignition 2 (IGT2) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 15 | Cam sensor ground (G-) | — | — | — | — | — | — | — | — |
| 16 | Crank sensor - (NE-) | — | — | — | — | — | — | — | — |
| 2 | Igniter 1 feedback (IGF1) | — | W40 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 3 | Knock sensor 1 (KNK1) | — | W8 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 4 | Check connector VF1 | — | — | — | — | — | — | — | — |
| 5 | Ignition 1 (IGT1) | — | W10 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 6 | Cam sensor 2 + (G2+) | — | W7 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 7 | Cam sensor 1 + (G1+) | — | W6 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 8 | Crank sensor + (NE+) | — | W5 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 11 | Injector 2&8 (#20) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 12 | Injector 1&7 (#10) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 13 | Power ground (E01) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 17 | Cold start injector 1 (STJ1) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 19 | O2 heater 2 (HT2) | — | W22 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 20 | O2 heater 1 (HT1) | — | W23 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 21 | EGR solenoid | — | W31 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 22 | Fuel pressure-up VSV (PR) | — | W32 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 24 | Injector 3&5 (#40) | — | W14 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 25 | Injector 4&6 (#30) | — | W15 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 26 | Power ground (E02) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Cold start injector (STJ) | — | W33 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 5 | ISC stepper coil 4 (ISC4) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 6 | ISC stepper coil 3 (ISC3) | — | W27 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 7 | ISC stepper coil 2 (ISC2) | — | W26 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 8 | ISC stepper coil 1 (ISC1) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-22 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-D-13 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-D-26 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Ignition switch (IGSW) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | single_source | |
| OEM-A-11 | Sensor supply +5V (VC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-A-12 | EFI main relay (B+) | power_in | — | — | — | single_source | |
| OEM-A-13 | EFI main relay (B1+) | power_in | — | — | — | single_source | |
| OEM-A-14 | Neutral start switch (NSW) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-A-16 | Intake air temperature (THA) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-A-17 | O2 right front (OXR1) | lambda_nb_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | single_source | |
| OEM-A-18 | Sensor ground (E2) | sensor_ground | — | — | — | single_source | |
| OEM-A-19 | Vehicle speed (SPD) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-A-2 | Starter signal (STA) | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-A-20 | Diagnostic test 2 (TE2) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-A-22 | Power ground (E1) | ground | — | — | — | single_source | |
| OEM-A-4 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-A-5 | Coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-A-6 | O2 left front (OXL1) | lambda_nb_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-A-7 | EGR temperature sensor | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | single_source | |
| OEM-A-8 | Knock/shield (KS) | knock_in | — | — | — | single_source | |
| OEM-A-9 | Diagnostic test 1 (TE1) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-B-11 | O2 right rear (OXR2) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | single_source | |
| OEM-B-19 | Stop light switch (BK) | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-B-20 | A/T kickdown switch (KD) | digital_in | G5VOODOOPROV-B-B27 | Digital Input 10 | digital_in | single_source | |
| OEM-B-23 | A/C request (AC) | digital_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-B-24 | O2 left rear (OXL2) | lambda_nb_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | single_source | |
| OEM-B-26 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-B-4 | EFI main relay control (MREL) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-B-5 | Check-engine lamp (W) | low_side_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-B-6 | Fuel pump relay (FPR) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-B-7 | A/C clutch relay (ACMG) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-B-8 | Fuel pump control (FC) | low_side_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-C-1 | TPS idle switch (IDL) | digital_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-C-10 | Igniter 2 feedback (IGF2) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-C-11 | Knock sensor 2 (KNK2) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | single_source | |
| OEM-C-12 | Check connector VF2 | analog_out | — | — | — | single_source | |
| OEM-C-13 | Ignition 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | single_source | |
| OEM-C-15 | Cam sensor ground (G-) | sensor_ground | — | — | — | single_source | |
| OEM-C-16 | Crank sensor - (NE-) | sensor_ground | — | — | — | single_source | |
| OEM-C-2 | Igniter 1 feedback (IGF1) | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-C-3 | Knock sensor 1 (KNK1) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-C-4 | Check connector VF1 | analog_out | — | — | — | single_source | |
| OEM-C-5 | Ignition 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-C-6 | Cam sensor 2 + (G2+) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-C-7 | Cam sensor 1 + (G1+) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-C-8 | Crank sensor + (NE+) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-D-11 | Injector 2&8 (#20) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source | |
| OEM-D-12 | Injector 1&7 (#10) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-D-13 | Power ground (E01) | ground | — | — | — | single_source | |
| OEM-D-17 | Cold start injector 1 (STJ1) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-D-19 | O2 heater 2 (HT2) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-D-20 | O2 heater 1 (HT1) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-D-21 | EGR solenoid | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-D-22 | Fuel pressure-up VSV (PR) | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-D-24 | Injector 3&5 (#40) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-D-25 | Injector 4&6 (#30) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-D-26 | Power ground (E02) | ground | — | — | — | single_source | |
| OEM-D-4 | Cold start injector (STJ) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-D-5 | ISC stepper coil 4 (ISC4) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-D-6 | ISC stepper coil 3 (ISC3) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-D-7 | ISC stepper coil 2 (ISC2) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-D-8 | ISC stepper coil 1 (ISC1) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-22 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W2 | OEM-D-13 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W3 | OEM-D-26 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W4 | OEM-A-11 | G5VOODOOPROV-A-A32 | 0.5 | no route | Sensor supply +5V (VC) | — | |
| W5 | OEM-C-8 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank sensor + (NE+) | — | |
| W6 | OEM-C-7 | G5VOODOOPROV-A-A9 | 0.5 | no route | Cam sensor 1 + (G1+) | — | |
| W7 | OEM-C-6 | G5VOODOOPROV-A-A30 | 0.5 | no route | Cam sensor 2 + (G2+) | — | |
| W8 | OEM-C-3 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W9 | OEM-C-11 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W10 | OEM-C-5 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W11 | OEM-C-13 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W12 | OEM-D-12 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1&7 (#10) | — | |
| W13 | OEM-D-11 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2&8 (#20) | — | |
| W14 | OEM-D-24 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3&5 (#40) | — | |
| W15 | OEM-D-25 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4&6 (#30) | — | |
| W16 | OEM-A-1 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W17 | OEM-A-4 | G5VOODOOPROV-A-A17 | 0.5 | no route | Throttle position (VTA1) | — | |
| W18 | OEM-A-5 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W19 | OEM-B-4 | G5VOODOOPROV-A-A21 | 0.5 | no route | EFI main relay control (MREL) | — | |
| W20 | OEM-B-6 | G5VOODOOPROV-A-A20 | 0.5 | no route | Fuel pump relay (FPR) | — | |
| W21 | OEM-B-7 | G5VOODOOPROV-A-A19 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W22 | OEM-D-19 | G5VOODOOPROV-E-E15 | 0.5 | no route | O2 heater 2 (HT2) | — | |
| W23 | OEM-D-20 | G5VOODOOPROV-E-E22 | 0.5 | no route | O2 heater 1 (HT1) | — | |
| W24 | OEM-D-17 | G5VOODOOPROV-A-A18 | 0.5 | no route | Cold start injector 1 (STJ1) | — | |
| W25 | OEM-D-8 | G5VOODOOPROV-A-A29 | 0.5 | no route | ISC stepper coil 1 (ISC1) | — | |
| W26 | OEM-D-7 | G5VOODOOPROV-A-A28 | 0.5 | no route | ISC stepper coil 2 (ISC2) | — | |
| W27 | OEM-D-6 | G5VOODOOPROV-A-A27 | 0.5 | no route | ISC stepper coil 3 (ISC3) | — | |
| W28 | OEM-D-5 | G5VOODOOPROV-A-A26 | 0.5 | no route | ISC stepper coil 4 (ISC4) | — | |
| W29 | OEM-B-5 | G5VOODOOPROV-B-B4 | 0.5 | no route | Check-engine lamp (W) | — | |
| W30 | OEM-B-8 | G5VOODOOPROV-B-B3 | 0.5 | no route | Fuel pump control (FC) | — | |
| W31 | OEM-D-21 | G5VOODOOPROV-B-B2 | 0.5 | no route | EGR solenoid | — | |
| W32 | OEM-D-22 | G5VOODOOPROV-B-B1 | 0.5 | no route | Fuel pressure-up VSV (PR) | — | |
| W33 | OEM-D-4 | G5VOODOOPROV-E-E4 | 0.5 | no route | Cold start injector (STJ) | — | |
| W34 | OEM-A-17 | G5VOODOOPROV-A-A22 | 0.5 | no route | O2 right front (OXR1) | — | |
| W35 | OEM-A-6 | G5VOODOOPROV-A-A33 | 0.5 | no route | O2 left front (OXL1) | — | |
| W36 | OEM-B-11 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 right rear (OXR2) | — | |
| W37 | OEM-B-24 | G5VOODOOPROV-B-B33 | 0.5 | no route | O2 left rear (OXL2) | — | |
| W38 | OEM-A-16 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (THA) | — | |
| W39 | OEM-A-7 | G5VOODOOPROV-B-B6 | 0.5 | no route | EGR temperature sensor | — | |
| W40 | OEM-C-2 | G5VOODOOPROV-A-A31 | 0.5 | no route | Igniter 1 feedback (IGF1) | — | |
| W41 | OEM-C-10 | G5VOODOOPROV-A-A23 | 0.5 | no route | Igniter 2 feedback (IGF2) | — | |
| W42 | OEM-A-19 | G5VOODOOPROV-B-B21 | 0.5 | no route | Vehicle speed (SPD) | — | |
| W43 | OEM-A-9 | G5VOODOOPROV-B-B20 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W44 | OEM-A-20 | G5VOODOOPROV-B-B19 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W45 | OEM-A-14 | G5VOODOOPROV-B-B30 | 0.5 | no route | Neutral start switch (NSW) | — | |
| W46 | OEM-A-2 | G5VOODOOPROV-B-B29 | 0.5 | no route | Starter signal (STA) | — | |
| W47 | OEM-B-19 | G5VOODOOPROV-B-B28 | 0.5 | no route | Stop light switch (BK) | — | |
| W48 | OEM-B-20 | G5VOODOOPROV-B-B27 | 0.5 | no route | A/T kickdown switch (KD) | — | |
| W49 | OEM-B-23 | G5VOODOOPROV-B-B15 | 0.5 | no route | A/C request (AC) | — | |
| W50 | OEM-C-1 | G5VOODOOPROV-B-B16 | 0.5 | no route | TPS idle switch (IDL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (22)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-A-12 | Required OEM function "EFI main relay (B+)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-13 | Required OEM function "EFI main relay (B1+)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-18 | Required OEM function "Sensor ground (E2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-22 | Required OEM function "Power ground (E1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-D-13 | Required OEM function "Power ground (E01)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-D-26 | Required OEM function "Power ground (E02)" (ground) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A19 | G5VOODOOPROV-A-A19 "Aux 3" drives OEM-B-7 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-B-6 Fuel pump relay (FPR) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-B-4 EFI main relay control (MREL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-B-23 ↔ G5VOODOOPROV-B-B15 | OEM-B-23 "A/C request (AC)" [digital_in] is wired to G5VOODOOPROV-B-B15 "Analogue Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C-1 ↔ G5VOODOOPROV-B-B16 | OEM-C-1 "TPS idle switch (IDL)" [digital_in] is wired to G5VOODOOPROV-B-B16 "Analogue Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C-6 ↔ G5VOODOOPROV-A-A30 | OEM-C-6 "Cam sensor 2 + (G2+)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-B-5 ↔ G5VOODOOPROV-B-B4 | OEM-B-5 "Check-engine lamp (W)" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-8 ↔ G5VOODOOPROV-B-B3 | OEM-B-8 "Fuel pump control (FC)" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-D-21 ↔ G5VOODOOPROV-B-B2 | OEM-D-21 "EGR solenoid" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-D-22 ↔ G5VOODOOPROV-B-B1 | OEM-D-22 "Fuel pressure-up VSV (PR)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-D-4 ↔ G5VOODOOPROV-E-E4 | OEM-D-4 "Cold start injector (STJ)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-D-5 ↔ G5VOODOOPROV-A-A26 | OEM-D-5 "ISC stepper coil 4 (ISC4)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-D-6 ↔ G5VOODOOPROV-A-A27 | OEM-D-6 "ISC stepper coil 3 (ISC3)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-D-7 ↔ G5VOODOOPROV-A-A28 | OEM-D-7 "ISC stepper coil 2 (ISC2)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-D-8 ↔ G5VOODOOPROV-A-A29 | OEM-D-8 "ISC stepper coil 1 (ISC1)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 5 optional OEM pins are not mapped: OEM-A-8 Knock/shield (KS); OEM-C-12 Check connector VF2; OEM-C-15 Cam sensor ground (G-); OEM-C-16 Crank sensor - (NE-); OEM-C-4 Check connector VF1 |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-B-26 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-A 12: EFI main relay (B+): no rule for class ecu_main_power; wire by hand - OEM-A 13: EFI main relay (B1+): no rule for class ecu_main_power; wire by hand - OEM-A 18: Sensor ground (E2): no rule for class ground_sensor; wire by hand Not wired: - OEM-B 26: Battery constant (BATT): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-A 8: Knock/shield (KS): no free knock input on Link G5 Voodoo Pro V1 - OEM-C 4: Check connector VF1: no free analog_out on Link G5 Voodoo Pro V1 - OEM-C 12: Check connector VF2: no free analog_out on Link G5 Voodoo Pro V1 - OEM-C 15: Cam sensor ground (G-): no rule for class ground_sensor; wire by hand - OEM-C 16: Crank sensor - (NE-): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 2 | community_copy | Lextreme: Adaptronic install for 1UZ-FE (Lexus LS400/SC400) — 4-plug A/B/C/D ECU pin table (1992 LS400) | https://www.lextreme.com/installation-of-an-adaptronic-ecu-for-a-lexus-ls400-sc400-1uzfe-engine/ | — | — | — |