← Back

Lexus SC400 1992-97 (1UZ-FE non-VVTi) → Link G5 Voodoo Pro V2 (auto)

Lexus SC400 1992-97 (1UZ-FE non-VVTi) — Link — G5 Voodoo Pro V2
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12

Before you start

Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.

Statusproposal · not yet verified: nobody has reported building and running this harness
Open errorsnone
Size of the job60 wires · 10 connectors · 0 part lines
ToolsCrimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink
Order of work1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up.

Build checklist

Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.

WireFromToGaugeColourCutLabelCrimp ACrimp BPin APin BContinuity
W1OEM-A-12SP-14V-10.85☐☐☐☐☐☐☐
W2OEM-A-13SP-14V-10.85☐☐☐☐☐☐☐
W3SP-14V-1G5VOODOOPROV-A-A50.85☐☐☐☐☐☐☐
W4SP-14V-1G5VOODOOPROV-B-B50.85☐☐☐☐☐☐☐
W5OEM-A-22SP-GND-10.85☐☐☐☐☐☐☐
W6OEM-D-13SP-GND-10.85☐☐☐☐☐☐☐
W7OEM-D-26SP-GND-10.85☐☐☐☐☐☐☐
W8SP-GND-1G5VOODOOPROV-A-A250.85☐☐☐☐☐☐☐
W9SP-GND-1G5VOODOOPROV-A-A340.85☐☐☐☐☐☐☐
W10SP-GND-1G5VOODOOPROV-B-B250.85☐☐☐☐☐☐☐
W11SP-GND-1G5VOODOOPROV-B-B340.85☐☐☐☐☐☐☐
W12SP-GND-1G5VOODOOPROV-E-E210.85☐☐☐☐☐☐☐
W13SP-GND-1G5VOODOOPROV-E-E70.85☐☐☐☐☐☐☐
W14OEM-A-18SP-0V-10.5☐☐☐☐☐☐☐
W15OEM-C-15SP-0V-10.5☐☐☐☐☐☐☐
W16OEM-C-16SP-0V-10.5☐☐☐☐☐☐☐
W17SP-0V-1G5VOODOOPROV-A-A240.5☐☐☐☐☐☐☐
W18SP-0V-1G5VOODOOPROV-B-B220.5☐☐☐☐☐☐☐
W19OEM-A-11G5VOODOOPROV-A-A320.5☐☐☐☐☐☐☐
W20OEM-C-8G5VOODOOPROV-A-A80.5☐☐☐☐☐☐☐
W21OEM-C-7G5VOODOOPROV-A-A90.5☐☐☐☐☐☐☐
W22OEM-C-6G5VOODOOPROV-A-A300.5☐☐☐☐☐☐☐
W23OEM-C-3G5VOODOOPROV-B-B90.5☐☐☐☐☐☐☐
W24OEM-C-11G5VOODOOPROV-B-B80.5☐☐☐☐☐☐☐
W25OEM-C-5G5VOODOOPROV-A-A130.5☐☐☐☐☐☐☐
W26OEM-C-13G5VOODOOPROV-A-A120.5☐☐☐☐☐☐☐
W27OEM-D-12G5VOODOOPROV-A-A40.5☐☐☐☐☐☐☐
W28OEM-D-11G5VOODOOPROV-A-A30.5☐☐☐☐☐☐☐
W29OEM-D-24G5VOODOOPROV-A-A20.5☐☐☐☐☐☐☐
W30OEM-D-25G5VOODOOPROV-A-A10.5☐☐☐☐☐☐☐
W31OEM-A-1G5VOODOOPROV-A-A60.5☐☐☐☐☐☐☐
W32OEM-A-4G5VOODOOPROV-A-A170.5☐☐☐☐☐☐☐
W33OEM-A-5G5VOODOOPROV-A-A150.5☐☐☐☐☐☐☐
W34OEM-B-4G5VOODOOPROV-E-E150.5☐☐☐☐☐☐☐
W35OEM-B-6G5VOODOOPROV-E-E220.5☐☐☐☐☐☐☐
W36OEM-B-7G5VOODOOPROV-B-B40.5☐☐☐☐☐☐☐
W37OEM-D-19G5VOODOOPROV-B-B30.5☐☐☐☐☐☐☐
W38OEM-D-20G5VOODOOPROV-B-B20.5☐☐☐☐☐☐☐
W39OEM-D-17G5VOODOOPROV-B-B10.5☐☐☐☐☐☐☐
W40OEM-D-8G5VOODOOPROV-E-E40.5☐☐☐☐☐☐☐
W41OEM-D-7G5VOODOOPROV-E-E30.5☐☐☐☐☐☐☐
W42OEM-D-6G5VOODOOPROV-E-E20.5☐☐☐☐☐☐☐
W43OEM-D-5G5VOODOOPROV-E-E10.5☐☐☐☐☐☐☐
W44OEM-A-17G5VOODOOPROV-A-A210.5☐☐☐☐☐☐☐
W45OEM-A-6G5VOODOOPROV-A-A200.5☐☐☐☐☐☐☐
W46OEM-B-11G5VOODOOPROV-A-A220.5☐☐☐☐☐☐☐
W47OEM-B-24G5VOODOOPROV-A-A190.5☐☐☐☐☐☐☐
W48OEM-A-16G5VOODOOPROV-A-A160.5☐☐☐☐☐☐☐
W49OEM-A-7G5VOODOOPROV-B-B60.5☐☐☐☐☐☐☐
W50OEM-C-2G5VOODOOPROV-A-A310.5☐☐☐☐☐☐☐
W51OEM-C-10G5VOODOOPROV-A-A230.5☐☐☐☐☐☐☐
W52OEM-A-19G5VOODOOPROV-B-B210.5☐☐☐☐☐☐☐
W53OEM-A-9G5VOODOOPROV-B-B200.5☐☐☐☐☐☐☐
W54OEM-A-20G5VOODOOPROV-B-B190.5☐☐☐☐☐☐☐
W55OEM-A-14G5VOODOOPROV-B-B300.5☐☐☐☐☐☐☐
W56OEM-A-2G5VOODOOPROV-B-B290.5☐☐☐☐☐☐☐
W57OEM-B-19G5VOODOOPROV-B-B280.5☐☐☐☐☐☐☐
W58OEM-B-20G5VOODOOPROV-B-B270.5☐☐☐☐☐☐☐
W59OEM-B-23G5VOODOOPROV-A-A330.5☐☐☐☐☐☐☐
W60OEM-C-1G5VOODOOPROV-A-A140.5☐☐☐☐☐☐☐

Bench test (before first power-up)

Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).

#Probe AProbe BExpectWhyReading
1G5VOODOOPROV-A-A32G5VOODOOPROV-A-A24open (OL)5 V sensor reference must not touch sensor ground
2G5VOODOOPROV-A-A32G5VOODOOPROV-A-A25open (OL)5 V sensor reference must not touch power ground
3G5VOODOOPROV-A-A5G5VOODOOPROV-A-A24open (OL)+12 V supply must not touch sensor ground
4G5VOODOOPROV-A-A5G5VOODOOPROV-A-A25open (OL)+12 V supply must not touch power ground
5G5VOODOOPROV-A-A32G5VOODOOPROV-A-A5open (OL)5 V sensor reference must not touch +12 V supply

If any reading doesn't match, stop and get help before powering up.

Revisions

RevLabelByDate
No revisions yet.

Schematic

G5VOODOOPROV-AG5VOODOOPROV-BG5VOODOOPROV-EOEM-AOEM-BOEM-COEM-DSP-0VSP-14VSP-GND

Connectors

G5VOODOOPROV-A

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
A1Injection 4—W30—0.5OEM-D-25———
A10Ignition 4————————
A11Ignition 3————————
A12Ignition 2—W26—0.5OEM-C-13———
A13Ignition 1—W25—0.5OEM-C-5———
A14Analogue Volt 4—W60—0.5OEM-C-1———
A15Analogue Temp 1—W33—0.5OEM-A-5———
A16Analogue Temp 2—W48—0.5OEM-A-16———
A17Analogue Volt 1—W32—0.5OEM-A-4———
A18ADIO 4————————
A19ADIO 3—W47—0.5OEM-B-24———
A2Injection 3—W29—0.5OEM-D-24———
A20ADIO 2—W45—0.5OEM-A-6———
A21ADIO 1—W44—0.5OEM-A-17———
A22Analogue Volt 2—W46—0.5OEM-B-11———
A23Digital Input 3—W51—0.5OEM-C-10———
A24Sensor Ground—W17—0.5SP-0V-1———
A25Ground—W8—0.85SP-GND-1———
A26ADIO 8————————
A27ADIO 7————————
A28ADIO 6————————
A29ADIO 5————————
A3Injection 2—W28—0.5OEM-D-11———
A30Digital Input 1—W22—0.5OEM-C-6———
A31Digital Input 2—W50—0.5OEM-C-2———
A32+5V Out—W19—0.5OEM-A-11———
A33Analogue Volt 3—W59—0.5OEM-B-23———
A34Ground—W9—0.85SP-GND-1———
A4Injection 1—W27—0.5OEM-D-12———
A5+14V—W3—0.85SP-14V-1———
A6Ignition Switch—W31—0.5OEM-A-1———
A7Shield Ground————————
A8Trigger 1—W20—0.5OEM-C-8———
A9Trigger 2—W21—0.5OEM-C-7———

G5VOODOOPROV-B

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
B1Injection 8—W39—0.5OEM-D-17———
B10Ignition 8————————
B11Ignition 7————————
B12Ignition 6————————
B13Ignition 5————————
B14Analogue Volt 14————————
B15Analogue Volt 6————————
B16Analogue Volt 7————————
B17Shield Ground————————
B18Aux 1 / H-Bridge 1————————
B19Digital Input 6 / K-Line 2—W54—0.5OEM-A-20———
B2Injection 7—W38—0.5OEM-D-20———
B20Digital Input 5 / K-Line 1—W53—0.5OEM-A-9———
B21Digital Input 4—W52—0.5OEM-A-19———
B22Sensor Ground—W18—0.5SP-0V-1———
B23Analogue Volt 8————————
B24Analogue Volt 9————————
B25Ground—W10—0.85SP-GND-1———
B26Aux 2 / H-Bridge 1————————
B27Digital Input 10—W58—0.5OEM-B-20———
B28Digital Input 9—W57—0.5OEM-B-19———
B29Digital Input 8—W56—0.5OEM-A-2———
B3Injection 6—W37—0.5OEM-D-19———
B30Digital Input 7—W55—0.5OEM-A-14———
B31Analogue Volt 10————————
B32Analogue Volt 11————————
B33Analogue Volt 5————————
B34Ground—W11—0.85SP-GND-1———
B4Injection 5—W36—0.5OEM-B-7———
B5+14V E-Throttle—W4—0.85SP-14V-1———
B6Analogue Temp 3—W49—0.5OEM-A-7———
B7Analogue Temp 4————————
B8Knock 2—W24—0.5OEM-C-11———
B9Knock 1—W23—0.5OEM-C-3———

G5VOODOOPROV-E

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
E1Injection 12—W43—0.5OEM-D-5———
E10Ignition 10 / Injection 14————————
E11Ignition 9 / Injection 13————————
E12Analogue Volt 12————————
E13Analogue Volt 13————————
E14Aux 3 / H-Bridge 2————————
E15Aux 5 / WB1 Heat—W34—0.5OEM-B-4———
E16WB1 RE————————
E17WB1 IPE————————
E18WB1 APE————————
E19WB1 MES————————
E2Injection 11—W42—0.5OEM-D-6———
E20Aux 4 / H-Bridge 2————————
E21Ground—W12—0.85SP-GND-1———
E22Aux 6 / WB2 Heat—W35—0.5OEM-B-6———
E23WB2 RE————————
E24WB2 IPE————————
E25WB2 APE————————
E26WB2 MES————————
E3Injection 10—W41—0.5OEM-D-7———
E4Injection 9—W40—0.5OEM-D-8———
E5CAN 2 High————————
E6CAN 2 Low————————
E7Ground—W13—0.85SP-GND-1———
E8Ignition 12 / Injection 16————————
E9Ignition 11 / Injection 15————————

OEM-A

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1Ignition switch (IGSW)—W31—0.5G5VOODOOPROV-A-A6———
11Sensor supply +5V (VC)—W19—0.5G5VOODOOPROV-A-A32———
12EFI main relay (B+)—W1—0.85SP-14V-1———
13EFI main relay (B1+)—W2—0.85SP-14V-1———
14Neutral start switch (NSW)—W55—0.5G5VOODOOPROV-B-B30———
16Intake air temperature (THA)—W48—0.5G5VOODOOPROV-A-A16———
17O2 right front (OXR1)—W44—0.5G5VOODOOPROV-A-A21———
18Sensor ground (E2)—W14—0.5SP-0V-1———
19Vehicle speed (SPD)—W52—0.5G5VOODOOPROV-B-B21———
2Starter signal (STA)—W56—0.5G5VOODOOPROV-B-B29———
20Diagnostic test 2 (TE2)—W54—0.5G5VOODOOPROV-B-B19———
22Power ground (E1)—W5—0.85SP-GND-1———
4Throttle position (VTA1)—W32—0.5G5VOODOOPROV-A-A17———
5Coolant temperature (THW)—W33—0.5G5VOODOOPROV-A-A15———
6O2 left front (OXL1)—W45—0.5G5VOODOOPROV-A-A20———
7EGR temperature sensor—W49—0.5G5VOODOOPROV-B-B6———
8Knock/shield (KS)————————
9Diagnostic test 1 (TE1)—W53—0.5G5VOODOOPROV-B-B20———

OEM-B

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
11O2 right rear (OXR2)—W46—0.5G5VOODOOPROV-A-A22———
19Stop light switch (BK)—W57—0.5G5VOODOOPROV-B-B28———
20A/T kickdown switch (KD)—W58—0.5G5VOODOOPROV-B-B27———
23A/C request (AC)—W59—0.5G5VOODOOPROV-A-A33———
24O2 left rear (OXL2)—W47—0.5G5VOODOOPROV-A-A19———
26Battery constant (BATT)————————
4EFI main relay control (MREL)—W34—0.5G5VOODOOPROV-E-E15———
5Check-engine lamp (W)————————
6Fuel pump relay (FPR)—W35—0.5G5VOODOOPROV-E-E22———
7A/C clutch relay (ACMG)—W36—0.5G5VOODOOPROV-B-B4———
8Fuel pump control (FC)————————

OEM-C

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1TPS idle switch (IDL)—W60—0.5G5VOODOOPROV-A-A14———
10Igniter 2 feedback (IGF2)—W51—0.5G5VOODOOPROV-A-A23———
11Knock sensor 2 (KNK2)—W24—0.5G5VOODOOPROV-B-B8———
12Check connector VF2————————
13Ignition 2 (IGT2)—W26—0.5G5VOODOOPROV-A-A12———
15Cam sensor ground (G-)—W15—0.5SP-0V-1———
16Crank sensor - (NE-)—W16—0.5SP-0V-1———
2Igniter 1 feedback (IGF1)—W50—0.5G5VOODOOPROV-A-A31———
3Knock sensor 1 (KNK1)—W23—0.5G5VOODOOPROV-B-B9———
4Check connector VF1————————
5Ignition 1 (IGT1)—W25—0.5G5VOODOOPROV-A-A13———
6Cam sensor 2 + (G2+)—W22—0.5G5VOODOOPROV-A-A30———
7Cam sensor 1 + (G1+)—W21—0.5G5VOODOOPROV-A-A9———
8Crank sensor + (NE+)—W20—0.5G5VOODOOPROV-A-A8———

OEM-D

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
11Injector 2&8 (#20)—W28—0.5G5VOODOOPROV-A-A3———
12Injector 1&7 (#10)—W27—0.5G5VOODOOPROV-A-A4———
13Power ground (E01)—W6—0.85SP-GND-1———
17Cold start injector 1 (STJ1)—W39—0.5G5VOODOOPROV-B-B1———
19O2 heater 2 (HT2)—W37—0.5G5VOODOOPROV-B-B3———
20O2 heater 1 (HT1)—W38—0.5G5VOODOOPROV-B-B2———
21EGR solenoid————————
22Fuel pressure-up VSV (PR)————————
24Injector 3&5 (#40)—W29—0.5G5VOODOOPROV-A-A2———
25Injector 4&6 (#30)—W30—0.5G5VOODOOPROV-A-A1———
26Power ground (E02)—W7—0.85SP-GND-1———
4Cold start injector (STJ)————————
5ISC stepper coil 4 (ISC4)—W43—0.5G5VOODOOPROV-E-E1———
6ISC stepper coil 3 (ISC3)—W42—0.5G5VOODOOPROV-E-E2———
7ISC stepper coil 2 (ISC2)—W41—0.5G5VOODOOPROV-E-E3———
8ISC stepper coil 1 (ISC1)—W40—0.5G5VOODOOPROV-E-E4———

SP-0V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W14—0.5OEM-A-18———
1——W15—0.5OEM-C-15———
1——W16—0.5OEM-C-16———
1——W17—0.5G5VOODOOPROV-A-A24———
1——W18—0.5G5VOODOOPROV-B-B22———

SP-14V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W1—0.85OEM-A-12———
1——W2—0.85OEM-A-13———
1——W3—0.85G5VOODOOPROV-A-A5———
1——W4—0.85G5VOODOOPROV-B-B5———

SP-GND

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W5—0.85OEM-A-22———
1——W6—0.85OEM-D-13———
1——W7—0.85OEM-D-26———
1——W8—0.85G5VOODOOPROV-A-A25———
1——W9—0.85G5VOODOOPROV-A-A34———
1——W10—0.85G5VOODOOPROV-B-B25———
1——W11—0.85G5VOODOOPROV-B-B34———
1——W12—0.85G5VOODOOPROV-E-E21———
1——W13—0.85G5VOODOOPROV-E-E7———

Pin map

OEM pointOEM functionOEM familyTarget pointTarget functionTarget familyWire colourEvidence
OEM-A-1Ignition switch (IGSW)digital_inG5VOODOOPROV-A-A6Ignition Switchdigital_insingle_source
OEM-A-11Sensor supply +5V (VC)vrefG5VOODOOPROV-A-A32+5V Outvrefsingle_source
OEM-A-12EFI main relay (B+)power_inG5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5+14V + +14V E-Throttlepower_insingle_source
OEM-A-13EFI main relay (B1+)power_inG5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5+14V + +14V E-Throttlepower_insingle_source
OEM-A-14Neutral start switch (NSW)digital_inG5VOODOOPROV-B-B30Digital Input 7digital_insingle_source
OEM-A-16Intake air temperature (THA)temp_inG5VOODOOPROV-A-A16Analogue Temp 2temp_insingle_source
OEM-A-17O2 right front (OXR1)lambda_nb_inG5VOODOOPROV-A-A21ADIO 1analog_insingle_source
OEM-A-18Sensor ground (E2)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-A-19Vehicle speed (SPD)digital_inG5VOODOOPROV-B-B21Digital Input 4digital_insingle_source
OEM-A-2Starter signal (STA)digital_inG5VOODOOPROV-B-B29Digital Input 8digital_insingle_source
OEM-A-20Diagnostic test 2 (TE2)digital_inG5VOODOOPROV-B-B19Digital Input 6 / K-Line 2digital_insingle_source
OEM-A-22Power ground (E1)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-A-4Throttle position (VTA1)analog_inG5VOODOOPROV-A-A17Analogue Volt 1analog_insingle_source
OEM-A-5Coolant temperature (THW)temp_inG5VOODOOPROV-A-A15Analogue Temp 1temp_insingle_source
OEM-A-6O2 left front (OXL1)lambda_nb_inG5VOODOOPROV-A-A20ADIO 2analog_insingle_source
OEM-A-7EGR temperature sensortemp_inG5VOODOOPROV-B-B6Analogue Temp 3temp_insingle_source
OEM-A-8Knock/shield (KS)knock_in———single_source
OEM-A-9Diagnostic test 1 (TE1)digital_inG5VOODOOPROV-B-B20Digital Input 5 / K-Line 1digital_insingle_source
OEM-B-11O2 right rear (OXR2)lambda_nb_inG5VOODOOPROV-A-A22Analogue Volt 2analog_insingle_source
OEM-B-19Stop light switch (BK)digital_inG5VOODOOPROV-B-B28Digital Input 9digital_insingle_source
OEM-B-20A/T kickdown switch (KD)digital_inG5VOODOOPROV-B-B27Digital Input 10digital_insingle_source
OEM-B-23A/C request (AC)digital_inG5VOODOOPROV-A-A33Analogue Volt 3analog_insingle_source
OEM-B-24O2 left rear (OXL2)lambda_nb_inG5VOODOOPROV-A-A19ADIO 3analog_insingle_source
OEM-B-26Battery constant (BATT)power_in———single_source
OEM-B-4EFI main relay control (MREL)low_side_outG5VOODOOPROV-E-E15Aux 5 / WB1 Heatlow_side_outsingle_source
OEM-B-5Check-engine lamp (W)low_side_out———single_source
OEM-B-6Fuel pump relay (FPR)low_side_outG5VOODOOPROV-E-E22Aux 6 / WB2 Heatlow_side_outsingle_source
OEM-B-7A/C clutch relay (ACMG)low_side_outG5VOODOOPROV-B-B4Injection 5injector_outsingle_source
OEM-B-8Fuel pump control (FC)low_side_out———single_source
OEM-C-1TPS idle switch (IDL)digital_inG5VOODOOPROV-A-A14Analogue Volt 4analog_insingle_source
OEM-C-10Igniter 2 feedback (IGF2)digital_inG5VOODOOPROV-A-A23Digital Input 3digital_insingle_source
OEM-C-11Knock sensor 2 (KNK2)knock_inG5VOODOOPROV-B-B8Knock 2knock_insingle_source
OEM-C-12Check connector VF2analog_out———single_source
OEM-C-13Ignition 2 (IGT2)ignition_outG5VOODOOPROV-A-A12Ignition 2ignition_outsingle_source
OEM-C-15Cam sensor ground (G-)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C-16Crank sensor - (NE-)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C-2Igniter 1 feedback (IGF1)digital_inG5VOODOOPROV-A-A31Digital Input 2digital_insingle_source
OEM-C-3Knock sensor 1 (KNK1)knock_inG5VOODOOPROV-B-B9Knock 1knock_insingle_source
OEM-C-4Check connector VF1analog_out———single_source
OEM-C-5Ignition 1 (IGT1)ignition_outG5VOODOOPROV-A-A13Ignition 1ignition_outsingle_source
OEM-C-6Cam sensor 2 + (G2+)trigger_inG5VOODOOPROV-A-A30Digital Input 1digital_insingle_source
OEM-C-7Cam sensor 1 + (G1+)trigger_inG5VOODOOPROV-A-A9Trigger 2trigger_insingle_source
OEM-C-8Crank sensor + (NE+)trigger_inG5VOODOOPROV-A-A8Trigger 1trigger_insingle_source
OEM-D-11Injector 2&8 (#20)injector_outG5VOODOOPROV-A-A3Injection 2injector_outsingle_source
OEM-D-12Injector 1&7 (#10)injector_outG5VOODOOPROV-A-A4Injection 1injector_outsingle_source
OEM-D-13Power ground (E01)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-D-17Cold start injector 1 (STJ1)low_side_outG5VOODOOPROV-B-B1Injection 8injector_outsingle_source
OEM-D-19O2 heater 2 (HT2)low_side_outG5VOODOOPROV-B-B3Injection 6injector_outsingle_source
OEM-D-20O2 heater 1 (HT1)low_side_outG5VOODOOPROV-B-B2Injection 7injector_outsingle_source
OEM-D-21EGR solenoidlow_side_out———single_source
OEM-D-22Fuel pressure-up VSV (PR)low_side_out———single_source
OEM-D-24Injector 3&5 (#40)injector_outG5VOODOOPROV-A-A2Injection 3injector_outsingle_source
OEM-D-25Injector 4&6 (#30)injector_outG5VOODOOPROV-A-A1Injection 4injector_outsingle_source
OEM-D-26Power ground (E02)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-D-4Cold start injector (STJ)low_side_out———single_source
OEM-D-5ISC stepper coil 4 (ISC4)low_side_outG5VOODOOPROV-E-E1Injection 12injector_outsingle_source
OEM-D-6ISC stepper coil 3 (ISC3)low_side_outG5VOODOOPROV-E-E2Injection 11injector_outsingle_source
OEM-D-7ISC stepper coil 2 (ISC2)low_side_outG5VOODOOPROV-E-E3Injection 10injector_outsingle_source
OEM-D-8ISC stepper coil 1 (ISC1)low_side_outG5VOODOOPROV-E-E4Injection 9injector_outsingle_source

Cut list

WireFromToGauge (mm²)ColourLengthSignalIdent
W1OEM-A-12SP-14V-10.85no routeEFI main relay (B+)—
W2OEM-A-13SP-14V-10.85no routeEFI main relay (B1+)—
W3SP-14V-1G5VOODOOPROV-A-A50.85no route+14V—
W4SP-14V-1G5VOODOOPROV-B-B50.85no route+14V E-Throttle—
W5OEM-A-22SP-GND-10.85no routePower ground (E1)—
W6OEM-D-13SP-GND-10.85no routePower ground (E01)—
W7OEM-D-26SP-GND-10.85no routePower ground (E02)—
W8SP-GND-1G5VOODOOPROV-A-A250.85no routeGround—
W9SP-GND-1G5VOODOOPROV-A-A340.85no routeGround—
W10SP-GND-1G5VOODOOPROV-B-B250.85no routeGround—
W11SP-GND-1G5VOODOOPROV-B-B340.85no routeGround—
W12SP-GND-1G5VOODOOPROV-E-E210.85no routeGround—
W13SP-GND-1G5VOODOOPROV-E-E70.85no routeGround—
W14OEM-A-18SP-0V-10.5no routeSensor ground (E2)—
W15OEM-C-15SP-0V-10.5no routeCam sensor ground (G-)—
W16OEM-C-16SP-0V-10.5no routeCrank sensor - (NE-)—
W17SP-0V-1G5VOODOOPROV-A-A240.5no routeSensor Ground—
W18SP-0V-1G5VOODOOPROV-B-B220.5no routeSensor Ground—
W19OEM-A-11G5VOODOOPROV-A-A320.5no routeSensor supply +5V (VC)—
W20OEM-C-8G5VOODOOPROV-A-A80.5no routeCrank sensor + (NE+)—
W21OEM-C-7G5VOODOOPROV-A-A90.5no routeCam sensor 1 + (G1+)—
W22OEM-C-6G5VOODOOPROV-A-A300.5no routeCam sensor 2 + (G2+)—
W23OEM-C-3G5VOODOOPROV-B-B90.5no routeKnock sensor 1 (KNK1)—
W24OEM-C-11G5VOODOOPROV-B-B80.5no routeKnock sensor 2 (KNK2)—
W25OEM-C-5G5VOODOOPROV-A-A130.5no routeIgnition 1 (IGT1)—
W26OEM-C-13G5VOODOOPROV-A-A120.5no routeIgnition 2 (IGT2)—
W27OEM-D-12G5VOODOOPROV-A-A40.5no routeInjector 1&7 (#10)—
W28OEM-D-11G5VOODOOPROV-A-A30.5no routeInjector 2&8 (#20)—
W29OEM-D-24G5VOODOOPROV-A-A20.5no routeInjector 3&5 (#40)—
W30OEM-D-25G5VOODOOPROV-A-A10.5no routeInjector 4&6 (#30)—
W31OEM-A-1G5VOODOOPROV-A-A60.5no routeIgnition switch (IGSW)—
W32OEM-A-4G5VOODOOPROV-A-A170.5no routeThrottle position (VTA1)—
W33OEM-A-5G5VOODOOPROV-A-A150.5no routeCoolant temperature (THW)—
W34OEM-B-4G5VOODOOPROV-E-E150.5no routeEFI main relay control (MREL)—
W35OEM-B-6G5VOODOOPROV-E-E220.5no routeFuel pump relay (FPR)—
W36OEM-B-7G5VOODOOPROV-B-B40.5no routeA/C clutch relay (ACMG)—
W37OEM-D-19G5VOODOOPROV-B-B30.5no routeO2 heater 2 (HT2)—
W38OEM-D-20G5VOODOOPROV-B-B20.5no routeO2 heater 1 (HT1)—
W39OEM-D-17G5VOODOOPROV-B-B10.5no routeCold start injector 1 (STJ1)—
W40OEM-D-8G5VOODOOPROV-E-E40.5no routeISC stepper coil 1 (ISC1)—
W41OEM-D-7G5VOODOOPROV-E-E30.5no routeISC stepper coil 2 (ISC2)—
W42OEM-D-6G5VOODOOPROV-E-E20.5no routeISC stepper coil 3 (ISC3)—
W43OEM-D-5G5VOODOOPROV-E-E10.5no routeISC stepper coil 4 (ISC4)—
W44OEM-A-17G5VOODOOPROV-A-A210.5no routeO2 right front (OXR1)—
W45OEM-A-6G5VOODOOPROV-A-A200.5no routeO2 left front (OXL1)—
W46OEM-B-11G5VOODOOPROV-A-A220.5no routeO2 right rear (OXR2)—
W47OEM-B-24G5VOODOOPROV-A-A190.5no routeO2 left rear (OXL2)—
W48OEM-A-16G5VOODOOPROV-A-A160.5no routeIntake air temperature (THA)—
W49OEM-A-7G5VOODOOPROV-B-B60.5no routeEGR temperature sensor—
W50OEM-C-2G5VOODOOPROV-A-A310.5no routeIgniter 1 feedback (IGF1)—
W51OEM-C-10G5VOODOOPROV-A-A230.5no routeIgniter 2 feedback (IGF2)—
W52OEM-A-19G5VOODOOPROV-B-B210.5no routeVehicle speed (SPD)—
W53OEM-A-9G5VOODOOPROV-B-B200.5no routeDiagnostic test 1 (TE1)—
W54OEM-A-20G5VOODOOPROV-B-B190.5no routeDiagnostic test 2 (TE2)—
W55OEM-A-14G5VOODOOPROV-B-B300.5no routeNeutral start switch (NSW)—
W56OEM-A-2G5VOODOOPROV-B-B290.5no routeStarter signal (STA)—
W57OEM-B-19G5VOODOOPROV-B-B280.5no routeStop light switch (BK)—
W58OEM-B-20G5VOODOOPROV-B-B270.5no routeA/T kickdown switch (KD)—
W59OEM-B-23G5VOODOOPROV-A-A330.5no routeA/C request (AC)—
W60OEM-C-1G5VOODOOPROV-A-A140.5no routeTPS idle switch (IDL)—

Bill of materials

CategoryPart numberManufacturerDescriptionQtyUnit

ECU setup sheet

RoleEngine refEngine signalSensorECU pointECU functionECU classSetup flag
No configured channels.

Findings

Open (15)

SeverityCodeSubjectMessage
warnLOAD_UNKNOWNG5VOODOOPROV-B-B4G5VOODOOPROV-B-B4 "Injection 5" drives OEM-B-7 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual.
warnLOAD_UNKNOWNG5VOODOOPROV-E-E15G5VOODOOPROV-E-E15 "Aux 5 / WB1 Heat" drives OEM-B-4 EFI main relay control (MREL) (load 0.2 A) but its current rating is unknown. Check the ECU manual.
warnLOAD_UNKNOWNG5VOODOOPROV-E-E22G5VOODOOPROV-E-E22 "Aux 6 / WB2 Heat" drives OEM-B-6 Fuel pump relay (FPR) (load 0.2 A) but its current rating is unknown. Check the ECU manual.
warnNET_FAMILYOEM-B-23 ↔ G5VOODOOPROV-A-A33OEM-B-23 "A/C request (AC)" [digital_in] is wired to G5VOODOOPROV-A-A33 "Analogue Volt 3" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C-1 ↔ G5VOODOOPROV-A-A14OEM-C-1 "TPS idle switch (IDL)" [digital_in] is wired to G5VOODOOPROV-A-A14 "Analogue Volt 4" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C-6 ↔ G5VOODOOPROV-A-A30OEM-C-6 "Cam sensor 2 + (G2+)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot.
infoNET_FAMILYOEM-B-7 ↔ G5VOODOOPROV-B-B4OEM-B-7 "A/C clutch relay (ACMG)" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-17 ↔ G5VOODOOPROV-B-B1OEM-D-17 "Cold start injector 1 (STJ1)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-19 ↔ G5VOODOOPROV-B-B3OEM-D-19 "O2 heater 2 (HT2)" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-20 ↔ G5VOODOOPROV-B-B2OEM-D-20 "O2 heater 1 (HT1)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-5 ↔ G5VOODOOPROV-E-E1OEM-D-5 "ISC stepper coil 4 (ISC4)" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-6 ↔ G5VOODOOPROV-E-E2OEM-D-6 "ISC stepper coil 3 (ISC3)" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-7 ↔ G5VOODOOPROV-E-E3OEM-D-7 "ISC stepper coil 2 (ISC2)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-D-8 ↔ G5VOODOOPROV-E-E4OEM-D-8 "ISC stepper coil 1 (ISC1)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoUNMAPPEDOEM8 optional OEM pins are not mapped: OEM-A-8 Knock/shield (KS); OEM-B-5 Check-engine lamp (W); OEM-B-8 Fuel pump control (FC); OEM-C-12 Check connector VF2; OEM-C-4 Check connector VF1; OEM-D-21 EGR solenoid; OEM-D-22 Fuel pressure-up VSV (PR); OEM-D-4 Cold start injector (STJ)

Accepted (1)

CodeSubjectReasonBy
REQUIRED_UNMAPPEDOEM-B-26Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed.mapping-proposal

Notes

Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-B 26: Battery constant (BATT): Link G5 Voodoo Pro V2 has no battery-constant input; not needed - OEM-A 8: Knock/shield (KS): no free knock input on Link G5 Voodoo Pro V2 - OEM-B 5: Check-engine lamp (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-B 8: Fuel pump control (FC): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-D 21: EGR solenoid: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-D 22: Fuel pressure-up VSV (PR): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-D 4: Cold start injector (STJ): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-C 4: Check connector VF1: no free analog_out on Link G5 Voodoo Pro V2 - OEM-C 12: Check connector VF2: no free analog_out on Link G5 Voodoo Pro V2

Sources

ReliabilityKindTitleURLArchiveCapturedSHA-256
4vendor_docLink G5 Voodoo Pro V2 Installer I/O Tablehttps://kb.linkecu.com/__attachments/a_f77d027cd0c72fff9873eaed54ce6e4ec34cf9da8ae01036efdbecbb8c95be0b/G5%20Voodoo%20Pro%20V2%20Installer%20IO%20Table.pdf———
2community_copyLextreme: Adaptronic install for 1UZ-FE (Lexus LS400/SC400) — 4-plug A/B/C/D ECU pin table (1992 LS400)https://www.lextreme.com/installation-of-an-adaptronic-ecu-for-a-lexus-ls400-sc400-1uzfe-engine/———