Lexus SC400 1998-2000 (1UZ-FE VVT-i) → MaxxECU MaxxECU GEN2 TRACK (auto)
Lexus SC400 1998-2000 (1UZ-FE VVT-i) — MaxxECU — MaxxECU GEN2 TRACK
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 60 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | MAXXECUGEN2T-MX1-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | MAXXECUGEN2T-MX2-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E13-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E14-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | MAXXECUGEN2T-MX1-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | MAXXECUGEN2T-MX2-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | MAXXECUGEN2T-MX3-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E13-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-E13-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | MAXXECUGEN2T-MX1-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E13-2 | MAXXECUGEN2T-MX1-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E14-23 | MAXXECUGEN2T-MX1-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E14-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E14-10 | MAXXECUGEN2T-MX1-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E14-18 | MAXXECUGEN2T-MX2-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E14-17 | MAXXECUGEN2T-MX2-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E14-11 | MAXXECUGEN2T-MX1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E14-12 | MAXXECUGEN2T-MX1-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-E14-13 | MAXXECUGEN2T-MX1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-E14-14 | MAXXECUGEN2T-MX1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E14-15 | MAXXECUGEN2T-MX2-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E14-16 | MAXXECUGEN2T-MX2-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E14-25 | MAXXECUGEN2T-MX3-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E14-26 | MAXXECUGEN2T-MX3-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E13-5 | MAXXECUGEN2T-MX1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E13-6 | MAXXECUGEN2T-MX1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E14-1 | MAXXECUGEN2T-MX1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E14-2 | MAXXECUGEN2T-MX1-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E14-3 | MAXXECUGEN2T-MX2-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E14-4 | MAXXECUGEN2T-MX2-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E14-5 | MAXXECUGEN2T-MX3-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E14-6 | MAXXECUGEN2T-MX3-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E14-7 | MAXXECUGEN2T-MX2-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E14-8 | MAXXECUGEN2T-MX2-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E15-9 | MAXXECUGEN2T-MX2-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E11-19 | MAXXECUGEN2T-MX1-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E14-20 | MAXXECUGEN2T-MX1-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E13-10 | MAXXECUGEN2T-MX1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E13-13 | MAXXECUGEN2T-MX1-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E13-21 | MAXXECUGEN2T-MX1-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E13-20 | MAXXECUGEN2T-MX1-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E13-9 | MAXXECUGEN2T-MX1-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E13-14 | MAXXECUGEN2T-MX2-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E15-10 | MAXXECUGEN2T-MX1-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E15-5 | MAXXECUGEN2T-MX1-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E11-7 | MAXXECUGEN2T-MX2-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E11-8 | MAXXECUGEN2T-MX3-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E13-3 | MAXXECUGEN2T-MX1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E13-4 | MAXXECUGEN2T-MX2-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E11-18 | MAXXECUGEN2T-MX2-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E11-27 | MAXXECUGEN2T-MX2-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E13-11 | MAXXECUGEN2T-MX2-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E13-12 | MAXXECUGEN2T-MX2-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E13-22 | MAXXECUGEN2T-MX2-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E14-27 | MAXXECUGEN2T-MX1-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E14-28 | MAXXECUGEN2T-MX1-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E11-17 | MAXXECUGEN2T-MX3-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECUGEN2T-MX1-12 | MAXXECUGEN2T-MX1-25 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 2 | MAXXECUGEN2T-MX1-14 | MAXXECUGEN2T-MX1-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | MAXXECUGEN2T-MX1-14 | MAXXECUGEN2T-MX1-25 | open (OL) | sensor ground must not touch +12 V supply | |
| 4 | MAXXECUGEN2T-MX1-9 | MAXXECUGEN2T-MX1-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | MAXXECUGEN2T-MX1-9 | MAXXECUGEN2T-MX1-25 | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUGEN2T-MX1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 1 | — | W20 | — | 0.5 | OEM-E14-11 | — | — | — |
| 10 | Digital/VR 1 SIGNAL + | — | W15 | — | 0.5 | OEM-E14-23 | — | — | — |
| 11 | Digital/VR 1 SIGNAL - | — | — | — | — | — | — | — | — |
| 12 | Digital/VR 1 POWER SUPPLY | — | W14 | — | 0.5 | OEM-E13-2 | — | — | — |
| 13 | Digital/VR 1 SHIELD | — | — | — | — | — | — | — | — |
| 14 | SENSOR GND | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CAN L | — | — | — | — | — | — | — | — |
| 16 | CAN H | — | — | — | — | — | — | — | — |
| 17 | GP out 5 (GND) | — | W51 | — | 0.5 | OEM-E13-3 | — | — | — |
| 18 | Digital/VR 2 SIGNAL + | — | W17 | — | 0.5 | OEM-E14-10 | — | — | — |
| 19 | Digital/VR 2 SIGNAL - | — | — | — | — | — | — | — | — |
| 2 | Ignition 2 | — | W21 | — | 0.5 | OEM-E14-12 | — | — | — |
| 20 | Digital/VR 2 POWER SUPPLY | — | — | — | — | — | — | — | — |
| 21 | Digital/VR 2 SHIELD | — | — | — | — | — | — | — | — |
| 22 | 5V power supply | — | — | — | — | — | — | — | — |
| 23 | Digital/VR 3 SIGNAL + | — | W58 | — | 0.5 | OEM-E14-27 | — | — | — |
| 24 | Digital/VR 4 SIGNAL + | — | W59 | — | 0.5 | OEM-E14-28 | — | — | — |
| 25 | 12V supply 1 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | AIN 1 | — | W41 | — | 0.5 | OEM-E13-10 | — | — | — |
| 27 | AIN 2 | — | W42 | — | 0.5 | OEM-E13-13 | — | — | — |
| 28 | AIN 3 | — | W43 | — | 0.5 | OEM-E13-21 | — | — | — |
| 29 | AIN 4 | — | W44 | — | 0.5 | OEM-E13-20 | — | — | — |
| 3 | Ignition 3 | — | W22 | — | 0.5 | OEM-E14-13 | — | — | — |
| 30 | AIN 5 | — | W45 | — | 0.5 | OEM-E13-9 | — | — | — |
| 31 | INJECTOR 1 | — | W28 | — | 0.5 | OEM-E13-5 | — | — | — |
| 32 | INJECTOR 2 | — | W29 | — | 0.5 | OEM-E13-6 | — | — | — |
| 33 | INJECTOR 3 | — | W30 | — | 0.5 | OEM-E14-1 | — | — | — |
| 34 | INJECTOR 4 | — | W31 | — | 0.5 | OEM-E14-2 | — | — | — |
| 4 | Ignition 4 | — | W23 | — | 0.5 | OEM-E14-14 | — | — | — |
| 5 | GP out 1 (GND) | — | W39 | — | 0.5 | OEM-E11-19 | — | — | — |
| 6 | GP out 2 (GND) | — | W40 | — | 0.5 | OEM-E14-20 | — | — | — |
| 7 | GP out 3 (GND) | — | W47 | — | 0.5 | OEM-E15-10 | — | — | — |
| 8 | GP out 4 (GND) | — | W48 | — | 0.5 | OEM-E15-5 | — | — | — |
| 9 | Engine gnd | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2T-MX2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 5 | — | W24 | — | 0.5 | OEM-E14-15 | — | — | — |
| 10 | WBO2 Sensor 1 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 Sensor 1 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP OUT 7 / WBO2 Sensor 1 H- | — | W49 | — | 0.5 | OEM-E11-7 | — | — | — |
| 13 | AIN 9 | — | W55 | — | 0.5 | OEM-E13-11 | — | — | — |
| 14 | AIN 10 | — | W56 | — | 0.5 | OEM-E13-12 | — | — | — |
| 15 | AIN 11 | — | W57 | — | 0.5 | OEM-E13-22 | — | — | — |
| 16 | AIN 12 | — | — | — | — | — | — | — | — |
| 17 | AIN 13 | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 1 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 1 IP | — | — | — | — | — | — | — | — |
| 2 | Ignition 6 | — | W25 | — | 0.5 | OEM-E14-16 | — | — | — |
| 20 | 12V WBO2 sensor 1 H+ | — | — | — | — | — | — | — | — |
| 21 | WBO2 sensor 1 SHIELD | — | — | — | — | — | — | — | — |
| 22 | AIN 14 | — | — | — | — | — | — | — | — |
| 23 | AIN 15 | — | — | — | — | — | — | — | — |
| 24 | 12V supply 3 | — | W38 | — | 0.5 | OEM-E15-9 | — | — | — |
| 25 | 12V supply 2 | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | KNOCK1 SHIELD | — | — | — | — | — | — | — | — |
| 27 | KNOCK 1- | — | — | — | — | — | — | — | — |
| 28 | KNOCK 1+ | — | W18 | — | 0.5 | OEM-E14-18 | — | — | — |
| 29 | KNOCK 2 SHIELD | — | — | — | — | — | — | — | — |
| 3 | GP out 6 (GND) | — | W52 | — | 0.5 | OEM-E13-4 | — | — | — |
| 30 | KNOCK 2- | — | — | — | — | — | — | — | — |
| 31 | KNOCK 2+ | — | W19 | — | 0.5 | OEM-E14-17 | — | — | — |
| 32 | AIN 16 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 5 | — | W32 | — | 0.5 | OEM-E14-3 | — | — | — |
| 34 | INJECTOR 6 | — | W33 | — | 0.5 | OEM-E14-4 | — | — | — |
| 4 | AIN 6 | — | W46 | — | 0.5 | OEM-E13-14 | — | — | — |
| 5 | AIN 7 | — | W53 | — | 0.5 | OEM-E11-18 | — | — | — |
| 6 | AIN 8 | — | W54 | — | 0.5 | OEM-E11-27 | — | — | — |
| 7 | GP out 13 (H-BRIDGE 1) | — | W37 | — | 0.5 | OEM-E14-8 | — | — | — |
| 8 | GP out 14 (H-BRIDGE 1) | — | W36 | — | 0.5 | OEM-E14-7 | — | — | — |
| 9 | Engine gnd | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2T-MX3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | GP out 15 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 10 | WBO2 sensor 2 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 sensor 2 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | — | W50 | — | 0.5 | OEM-E11-8 | — | — | — |
| 14 | GP OUT 9 (12V) | — | — | — | — | — | — | — | — |
| 15 | GP OUT 10 (12V) | — | — | — | — | — | — | — | — |
| 16 | GP OUT 11 (12V) | — | — | — | — | — | — | — | — |
| 17 | GP OUT 12 (12V) | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 2 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 2 IP | — | — | — | — | — | — | — | — |
| 2 | GP out 16 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 2 (H+) | — | — | — | — | — | — | — | — |
| 21 | Digital/VR 5 SIGNAL + | — | W60 | — | 0.5 | OEM-E11-17 | — | — | — |
| 22 | Digital/VR 5 SIGNAL - | — | — | — | — | — | — | — | — |
| 23 | Digital/VR 5 SHIELD | — | — | — | — | — | — | — | — |
| 24 | CAN 2 L | — | — | — | — | — | — | — | — |
| 25 | CAN 2 H | — | — | — | — | — | — | — | — |
| 26 | Digital/VR 6 SIGNAL + | — | — | — | — | — | — | — | — |
| 27 | Digital/VR 6 SIGNAL - | — | — | — | — | — | — | — | — |
| 28 | Digital/VR 6 SHIELD | — | — | — | — | — | — | — | — |
| 29 | INJECTOR 7 | — | W34 | — | 0.5 | OEM-E14-5 | — | — | — |
| 3 | Ignition 7 | — | W26 | — | 0.5 | OEM-E14-25 | — | — | — |
| 30 | INJECTOR 8 | — | W35 | — | 0.5 | OEM-E14-6 | — | — | — |
| 4 | Ignition 8 | — | W27 | — | 0.5 | OEM-E14-26 | — | — | — |
| 9 | Engine gnd | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-E11
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 17 | Starter signal (STA) | — | W60 | — | 0.5 | MAXXECUGEN2T-MX3-21 | — | — | — |
| 18 | O2 sensor signal (bank unconfirmed) | — | W53 | — | 0.5 | MAXXECUGEN2T-MX2-5 | — | — | — |
| 19 | VVT oil-control valve RH (OCR+) | — | W39 | — | 0.5 | MAXXECUGEN2T-MX1-5 | — | — | — |
| 27 | O2 sensor signal (bank unconfirmed) | — | W54 | — | 0.5 | MAXXECUGEN2T-MX2-6 | — | — | — |
| 28 | VVT oil-control valve RH (OCR−) | — | — | — | — | — | — | — | — |
| 5 | Diagnostic test (TC) | — | — | — | — | — | — | — | — |
| 7 | O2 sensor heater (bank unconfirmed) | — | W49 | — | 0.5 | MAXXECUGEN2T-MX2-12 | — | — | — |
| 8 | O2 sensor heater (bank unconfirmed) | — | W50 | — | 0.5 | MAXXECUGEN2T-MX3-12 | — | — | — |
OEM-E12
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 12 | Throttle magnetic clutch + (CL+) | — | — | — | — | — | — | — | — |
OEM-E13
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | MAF signal (VG) | — | W41 | — | 0.5 | MAXXECUGEN2T-MX1-26 | — | — | — |
| 11 | O2 sensor signal (bank unconfirmed) | — | W55 | — | 0.5 | MAXXECUGEN2T-MX2-13 | — | — | — |
| 12 | O2 sensor signal (bank unconfirmed) | — | W56 | — | 0.5 | MAXXECUGEN2T-MX2-14 | — | — | — |
| 13 | Throttle position sensor 1 (VTA) | — | W42 | — | 0.5 | MAXXECUGEN2T-MX1-27 | — | — | — |
| 14 | Engine coolant temp (THW) | — | W46 | — | 0.5 | MAXXECUGEN2T-MX2-4 | — | — | — |
| 15 | VVT position sensor RH (VVR+) | — | — | — | — | — | — | — | — |
| 16 | VVT position sensor LH (VVL+) | — | — | — | — | — | — | — | — |
| 17 | ECU ground (E1) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | +5V sensor reference (VC) | — | W14 | — | 0.5 | MAXXECUGEN2T-MX1-12 | — | — | — |
| 20 | Throttle position sensor 2 (VTA2) | — | W44 | — | 0.5 | MAXXECUGEN2T-MX1-29 | — | — | — |
| 21 | Accelerator pedal position 1 (VPA) | — | W43 | — | 0.5 | MAXXECUGEN2T-MX1-28 | — | — | — |
| 22 | Intake air temp (THA) | — | W57 | — | 0.5 | MAXXECUGEN2T-MX2-15 | — | — | — |
| 23 | VVT position sensor RH (VVR−) | — | — | — | — | — | — | — | — |
| 24 | VVT position sensor LH (VVL−) | — | — | — | — | — | — | — | — |
| 3 | O2 sensor heater (bank unconfirmed) | — | W51 | — | 0.5 | MAXXECUGEN2T-MX1-17 | — | — | — |
| 4 | O2 sensor heater (bank unconfirmed) | — | W52 | — | 0.5 | MAXXECUGEN2T-MX2-3 | — | — | — |
| 5 | Injector 1 (cyl 1) | — | W28 | — | 0.5 | MAXXECUGEN2T-MX1-31 | — | — | — |
| 6 | Injector 2 (cyl 2) | — | W29 | — | 0.5 | MAXXECUGEN2T-MX1-32 | — | — | — |
| 8 | Throttle magnetic clutch − (CL−) | — | — | — | — | — | — | — | — |
| 9 | Accelerator pedal position 2 (VPA2) | — | W45 | — | 0.5 | MAXXECUGEN2T-MX1-30 | — | — | — |
OEM-E14
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (cyl 3) | — | W30 | — | 0.5 | MAXXECUGEN2T-MX1-33 | — | — | — |
| 10 | Camshaft position sensor (G2) | — | W17 | — | 0.5 | MAXXECUGEN2T-MX1-18 | — | — | — |
| 11 | Ignition coil 1 (IGT1) | — | W20 | — | 0.5 | MAXXECUGEN2T-MX1-1 | — | — | — |
| 12 | Ignition coil 2 (IGT2) | — | W21 | — | 0.5 | MAXXECUGEN2T-MX1-2 | — | — | — |
| 13 | Ignition coil 3 (IGT3) | — | W22 | — | 0.5 | MAXXECUGEN2T-MX1-3 | — | — | — |
| 14 | Ignition coil 4 (IGT4) | — | W23 | — | 0.5 | MAXXECUGEN2T-MX1-4 | — | — | — |
| 15 | Ignition coil 5 (IGT5) | — | W24 | — | 0.5 | MAXXECUGEN2T-MX2-1 | — | — | — |
| 16 | Ignition coil 6 (IGT6) | — | W25 | — | 0.5 | MAXXECUGEN2T-MX2-2 | — | — | — |
| 17 | Knock sensor RH (KNKR) | — | W19 | — | 0.5 | MAXXECUGEN2T-MX2-31 | — | — | — |
| 18 | Knock sensor LH (KNKL) | — | W18 | — | 0.5 | MAXXECUGEN2T-MX2-28 | — | — | — |
| 19 | VVT oil-control valve LH (OCV−) | — | — | — | — | — | — | — | — |
| 2 | Injector 4 (cyl 4) | — | W31 | — | 0.5 | MAXXECUGEN2T-MX1-34 | — | — | — |
| 20 | VVT oil-control valve LH (OCV+) | — | W40 | — | 0.5 | MAXXECUGEN2T-MX1-6 | — | — | — |
| 21 | Power/injector ground (E01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank position sensor (NE−) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Crank position sensor (NE+) | — | W15 | — | 0.5 | MAXXECUGEN2T-MX1-10 | — | — | — |
| 25 | Ignition coil 7 (IGT7) | — | W26 | — | 0.5 | MAXXECUGEN2T-MX3-3 | — | — | — |
| 26 | Ignition coil 8 (IGT8) | — | W27 | — | 0.5 | MAXXECUGEN2T-MX3-4 | — | — | — |
| 27 | Ignition confirmation 1 (IGF1) | — | W58 | — | 0.5 | MAXXECUGEN2T-MX1-23 | — | — | — |
| 28 | Ignition confirmation 2 (IGF2) | — | W59 | — | 0.5 | MAXXECUGEN2T-MX1-24 | — | — | — |
| 29 | ACIS induction VSV | — | — | — | — | — | — | — | — |
| 3 | Injector 5 (cyl 5) | — | W32 | — | 0.5 | MAXXECUGEN2T-MX2-33 | — | — | — |
| 4 | Injector 6 (cyl 6) | — | W33 | — | 0.5 | MAXXECUGEN2T-MX2-34 | — | — | — |
| 5 | Injector 7 (cyl 7) | — | W34 | — | 0.5 | MAXXECUGEN2T-MX3-29 | — | — | — |
| 6 | Injector 8 (cyl 8) | — | W35 | — | 0.5 | MAXXECUGEN2T-MX3-30 | — | — | — |
| 7 | Throttle motor − (M−) | — | W36 | — | 0.5 | MAXXECUGEN2T-MX2-8 | — | — | — |
| 8 | Throttle motor + (M+) | — | W37 | — | 0.5 | MAXXECUGEN2T-MX2-7 | — | — | — |
OEM-E15
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (+12V) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (MREL) | — | W47 | — | 0.5 | MAXXECUGEN2T-MX1-7 | — | — | — |
| 11 | OBD-II / DLC3 data (SIL) | — | — | — | — | — | — | — | — |
| 16 | ECM power (EFI relay +B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 5 | Fuel pump relay control (FC) | — | W48 | — | 0.5 | MAXXECUGEN2T-MX1-8 | — | — | — |
| 6 | Check engine light (W) | — | — | — | — | — | — | — | — |
| 7 | ECM power feed (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | ECM power (EFI relay +B1) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (+12V) | — | W38 | — | 0.5 | MAXXECUGEN2T-MX2-24 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W11 | — | 0.5 | OEM-E13-18 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-E13-19 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | MAXXECUGEN2T-MX1-14 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-E14-22 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E15-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E15-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-E15-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MAXXECUGEN2T-MX1-25 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | MAXXECUGEN2T-MX2-25 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W6 | — | 0.85 | OEM-E13-17 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-E14-21 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MAXXECUGEN2T-MX1-9 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MAXXECUGEN2T-MX2-9 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MAXXECUGEN2T-MX3-9 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E11-17 | Starter signal (STA) | digital_in | MAXXECUGEN2T-MX3-21 | Digital/VR 5 SIGNAL + | digital_in | corroborated | |
| OEM-E11-18 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | MAXXECUGEN2T-MX2-5 | AIN 7 | analog_in | corroborated | |
| OEM-E11-19 | VVT oil-control valve RH (OCR+) | low_side_out | MAXXECUGEN2T-MX1-5 | GP out 1 (GND) | low_side_out | corroborated | |
| OEM-E11-27 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | MAXXECUGEN2T-MX2-6 | AIN 8 | analog_in | corroborated | |
| OEM-E11-28 | VVT oil-control valve RH (OCR−) | low_side_out | — | — | — | corroborated | |
| OEM-E11-5 | Diagnostic test (TC) | serial | — | — | — | corroborated | |
| OEM-E11-7 | O2 sensor heater (bank unconfirmed) | low_side_out | MAXXECUGEN2T-MX2-12 | GP OUT 7 / WBO2 Sensor 1 H- | low_side_out | corroborated | |
| OEM-E11-8 | O2 sensor heater (bank unconfirmed) | low_side_out | MAXXECUGEN2T-MX3-12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | low_side_out | corroborated | |
| OEM-E12-12 | Throttle magnetic clutch + (CL+) | low_side_out | — | — | — | corroborated | |
| OEM-E13-10 | MAF signal (VG) | analog_in | MAXXECUGEN2T-MX1-26 | AIN 1 | analog_in | corroborated | |
| OEM-E13-11 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | MAXXECUGEN2T-MX2-13 | AIN 9 | analog_in | corroborated | |
| OEM-E13-12 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | MAXXECUGEN2T-MX2-14 | AIN 10 | analog_in | corroborated | |
| OEM-E13-13 | Throttle position sensor 1 (VTA) | analog_in | MAXXECUGEN2T-MX1-27 | AIN 2 | analog_in | corroborated | |
| OEM-E13-14 | Engine coolant temp (THW) | temp_in | MAXXECUGEN2T-MX2-4 | AIN 6 | analog_in | corroborated | |
| OEM-E13-15 | VVT position sensor RH (VVR+) | trigger_in | — | — | — | corroborated | |
| OEM-E13-16 | VVT position sensor LH (VVL+) | trigger_in | — | — | — | corroborated | |
| OEM-E13-17 | ECU ground (E1) | ground | MAXXECUGEN2T-MX1-9 + MAXXECUGEN2T-MX2-9 + MAXXECUGEN2T-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | corroborated | |
| OEM-E13-18 | Sensor ground (E2) | sensor_ground | MAXXECUGEN2T-MX1-14 | SENSOR GND | sensor_ground | corroborated | |
| OEM-E13-19 | MAF ground (EVG) | sensor_ground | MAXXECUGEN2T-MX1-14 | SENSOR GND | sensor_ground | corroborated | |
| OEM-E13-2 | +5V sensor reference (VC) | vref | MAXXECUGEN2T-MX1-12 | Digital/VR 1 POWER SUPPLY | vref | corroborated | |
| OEM-E13-20 | Throttle position sensor 2 (VTA2) | analog_in | MAXXECUGEN2T-MX1-29 | AIN 4 | analog_in | corroborated | |
| OEM-E13-21 | Accelerator pedal position 1 (VPA) | analog_in | MAXXECUGEN2T-MX1-28 | AIN 3 | analog_in | corroborated | |
| OEM-E13-22 | Intake air temp (THA) | temp_in | MAXXECUGEN2T-MX2-15 | AIN 11 | analog_in | corroborated | |
| OEM-E13-23 | VVT position sensor RH (VVR−) | trigger_in | — | — | — | corroborated | |
| OEM-E13-24 | VVT position sensor LH (VVL−) | trigger_in | — | — | — | corroborated | |
| OEM-E13-3 | O2 sensor heater (bank unconfirmed) | low_side_out | MAXXECUGEN2T-MX1-17 | GP out 5 (GND) | low_side_out | corroborated | |
| OEM-E13-4 | O2 sensor heater (bank unconfirmed) | low_side_out | MAXXECUGEN2T-MX2-3 | GP out 6 (GND) | low_side_out | corroborated | |
| OEM-E13-5 | Injector 1 (cyl 1) | injector_out | MAXXECUGEN2T-MX1-31 | INJECTOR 1 | injector_out | corroborated | |
| OEM-E13-6 | Injector 2 (cyl 2) | injector_out | MAXXECUGEN2T-MX1-32 | INJECTOR 2 | injector_out | corroborated | |
| OEM-E13-8 | Throttle magnetic clutch − (CL−) | low_side_out | — | — | — | corroborated | |
| OEM-E13-9 | Accelerator pedal position 2 (VPA2) | analog_in | MAXXECUGEN2T-MX1-30 | AIN 5 | analog_in | corroborated | |
| OEM-E14-1 | Injector 3 (cyl 3) | injector_out | MAXXECUGEN2T-MX1-33 | INJECTOR 3 | injector_out | corroborated | |
| OEM-E14-10 | Camshaft position sensor (G2) | trigger_in | MAXXECUGEN2T-MX1-18 | Digital/VR 2 SIGNAL + | trigger_in | corroborated | |
| OEM-E14-11 | Ignition coil 1 (IGT1) | ignition_out | MAXXECUGEN2T-MX1-1 | Ignition 1 | ignition_out | corroborated | |
| OEM-E14-12 | Ignition coil 2 (IGT2) | ignition_out | MAXXECUGEN2T-MX1-2 | Ignition 2 | ignition_out | corroborated | |
| OEM-E14-13 | Ignition coil 3 (IGT3) | ignition_out | MAXXECUGEN2T-MX1-3 | Ignition 3 | ignition_out | corroborated | |
| OEM-E14-14 | Ignition coil 4 (IGT4) | ignition_out | MAXXECUGEN2T-MX1-4 | Ignition 4 | ignition_out | corroborated | |
| OEM-E14-15 | Ignition coil 5 (IGT5) | ignition_out | MAXXECUGEN2T-MX2-1 | Ignition 5 | ignition_out | corroborated | |
| OEM-E14-16 | Ignition coil 6 (IGT6) | ignition_out | MAXXECUGEN2T-MX2-2 | Ignition 6 | ignition_out | corroborated | |
| OEM-E14-17 | Knock sensor RH (KNKR) | knock_in | MAXXECUGEN2T-MX2-31 | KNOCK 2+ | knock_in | corroborated | |
| OEM-E14-18 | Knock sensor LH (KNKL) | knock_in | MAXXECUGEN2T-MX2-28 | KNOCK 1+ | knock_in | corroborated | |
| OEM-E14-19 | VVT oil-control valve LH (OCV−) | low_side_out | — | — | — | corroborated | |
| OEM-E14-2 | Injector 4 (cyl 4) | injector_out | MAXXECUGEN2T-MX1-34 | INJECTOR 4 | injector_out | corroborated | |
| OEM-E14-20 | VVT oil-control valve LH (OCV+) | low_side_out | MAXXECUGEN2T-MX1-6 | GP out 2 (GND) | low_side_out | corroborated | |
| OEM-E14-21 | Power/injector ground (E01) | ground | MAXXECUGEN2T-MX1-9 + MAXXECUGEN2T-MX2-9 + MAXXECUGEN2T-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | corroborated | |
| OEM-E14-22 | Crank position sensor (NE−) | trigger_in | MAXXECUGEN2T-MX1-14 | SENSOR GND | sensor_ground | corroborated | |
| OEM-E14-23 | Crank position sensor (NE+) | trigger_in | MAXXECUGEN2T-MX1-10 | Digital/VR 1 SIGNAL + | trigger_in | corroborated | |
| OEM-E14-25 | Ignition coil 7 (IGT7) | ignition_out | MAXXECUGEN2T-MX3-3 | Ignition 7 | ignition_out | corroborated | |
| OEM-E14-26 | Ignition coil 8 (IGT8) | ignition_out | MAXXECUGEN2T-MX3-4 | Ignition 8 | ignition_out | corroborated | |
| OEM-E14-27 | Ignition confirmation 1 (IGF1) | digital_in | MAXXECUGEN2T-MX1-23 | Digital/VR 3 SIGNAL + | digital_in | corroborated | |
| OEM-E14-28 | Ignition confirmation 2 (IGF2) | digital_in | MAXXECUGEN2T-MX1-24 | Digital/VR 4 SIGNAL + | digital_in | corroborated | |
| OEM-E14-29 | ACIS induction VSV | low_side_out | — | — | — | corroborated | |
| OEM-E14-3 | Injector 5 (cyl 5) | injector_out | MAXXECUGEN2T-MX2-33 | INJECTOR 5 | injector_out | corroborated | |
| OEM-E14-4 | Injector 6 (cyl 6) | injector_out | MAXXECUGEN2T-MX2-34 | INJECTOR 6 | injector_out | corroborated | |
| OEM-E14-5 | Injector 7 (cyl 7) | injector_out | MAXXECUGEN2T-MX3-29 | INJECTOR 7 | injector_out | corroborated | |
| OEM-E14-6 | Injector 8 (cyl 8) | injector_out | MAXXECUGEN2T-MX3-30 | INJECTOR 8 | injector_out | corroborated | |
| OEM-E14-7 | Throttle motor − (M−) | hbridge_out | MAXXECUGEN2T-MX2-8 | GP out 14 (H-BRIDGE 1) | hbridge_out | corroborated | |
| OEM-E14-8 | Throttle motor + (M+) | hbridge_out | MAXXECUGEN2T-MX2-7 | GP out 13 (H-BRIDGE 1) | hbridge_out | corroborated | |
| OEM-E15-1 | Battery constant (+12V) | power_in | — | — | — | corroborated | |
| OEM-E15-10 | EFI main relay control (MREL) | low_side_out | MAXXECUGEN2T-MX1-7 | GP out 3 (GND) | low_side_out | corroborated | |
| OEM-E15-11 | OBD-II / DLC3 data (SIL) | serial | — | — | — | corroborated | |
| OEM-E15-16 | ECM power (EFI relay +B) | power_in | MAXXECUGEN2T-MX1-25 + MAXXECUGEN2T-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | corroborated | |
| OEM-E15-5 | Fuel pump relay control (FC) | low_side_out | MAXXECUGEN2T-MX1-8 | GP out 4 (GND) | low_side_out | corroborated | |
| OEM-E15-6 | Check engine light (W) | low_side_out | — | — | — | corroborated | |
| OEM-E15-7 | ECM power feed (+BM) | power_in | MAXXECUGEN2T-MX1-25 + MAXXECUGEN2T-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | corroborated | |
| OEM-E15-8 | ECM power (EFI relay +B1) | power_in | MAXXECUGEN2T-MX1-25 + MAXXECUGEN2T-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | corroborated | |
| OEM-E15-9 | Ignition switch (+12V) | digital_in | MAXXECUGEN2T-MX2-24 | 12V supply 3 | digital_in | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B) | — | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | no route | ECM power feed (+BM) | — | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B1) | — | |
| W4 | SP-14V-1 | MAXXECUGEN2T-MX1-25 | 0.85 | no route | 12V supply 1 | — | |
| W5 | SP-14V-1 | MAXXECUGEN2T-MX2-25 | 0.85 | no route | 12V supply 2 | — | |
| W6 | OEM-E13-17 | SP-GND-1 | 0.85 | no route | ECU ground (E1) | — | |
| W7 | OEM-E14-21 | SP-GND-1 | 0.85 | no route | Power/injector ground (E01) | — | |
| W8 | SP-GND-1 | MAXXECUGEN2T-MX1-9 | 0.85 | no route | Engine gnd | — | |
| W9 | SP-GND-1 | MAXXECUGEN2T-MX2-9 | 0.85 | no route | Engine gnd | — | |
| W10 | SP-GND-1 | MAXXECUGEN2T-MX3-9 | 0.85 | no route | Engine gnd | — | |
| W11 | OEM-E13-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W12 | OEM-E13-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W13 | SP-0V-1 | MAXXECUGEN2T-MX1-14 | 0.5 | no route | SENSOR GND | — | |
| W14 | OEM-E13-2 | MAXXECUGEN2T-MX1-12 | 0.5 | no route | +5V sensor reference (VC) | — | |
| W15 | OEM-E14-23 | MAXXECUGEN2T-MX1-10 | 0.5 | no route | Crank position sensor (NE+) | — | |
| W16 | OEM-E14-22 | SP-0V-1 | 0.5 | no route | Crank position sensor (NE−) | — | |
| W17 | OEM-E14-10 | MAXXECUGEN2T-MX1-18 | 0.5 | no route | Camshaft position sensor (G2) | — | |
| W18 | OEM-E14-18 | MAXXECUGEN2T-MX2-28 | 0.5 | no route | Knock sensor LH (KNKL) | — | |
| W19 | OEM-E14-17 | MAXXECUGEN2T-MX2-31 | 0.5 | no route | Knock sensor RH (KNKR) | — | |
| W20 | OEM-E14-11 | MAXXECUGEN2T-MX1-1 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W21 | OEM-E14-12 | MAXXECUGEN2T-MX1-2 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W22 | OEM-E14-13 | MAXXECUGEN2T-MX1-3 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W23 | OEM-E14-14 | MAXXECUGEN2T-MX1-4 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W24 | OEM-E14-15 | MAXXECUGEN2T-MX2-1 | 0.5 | no route | Ignition coil 5 (IGT5) | — | |
| W25 | OEM-E14-16 | MAXXECUGEN2T-MX2-2 | 0.5 | no route | Ignition coil 6 (IGT6) | — | |
| W26 | OEM-E14-25 | MAXXECUGEN2T-MX3-3 | 0.5 | no route | Ignition coil 7 (IGT7) | — | |
| W27 | OEM-E14-26 | MAXXECUGEN2T-MX3-4 | 0.5 | no route | Ignition coil 8 (IGT8) | — | |
| W28 | OEM-E13-5 | MAXXECUGEN2T-MX1-31 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W29 | OEM-E13-6 | MAXXECUGEN2T-MX1-32 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W30 | OEM-E14-1 | MAXXECUGEN2T-MX1-33 | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W31 | OEM-E14-2 | MAXXECUGEN2T-MX1-34 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W32 | OEM-E14-3 | MAXXECUGEN2T-MX2-33 | 0.5 | no route | Injector 5 (cyl 5) | — | |
| W33 | OEM-E14-4 | MAXXECUGEN2T-MX2-34 | 0.5 | no route | Injector 6 (cyl 6) | — | |
| W34 | OEM-E14-5 | MAXXECUGEN2T-MX3-29 | 0.5 | no route | Injector 7 (cyl 7) | — | |
| W35 | OEM-E14-6 | MAXXECUGEN2T-MX3-30 | 0.5 | no route | Injector 8 (cyl 8) | — | |
| W36 | OEM-E14-7 | MAXXECUGEN2T-MX2-8 | 0.5 | no route | Throttle motor − (M−) | — | |
| W37 | OEM-E14-8 | MAXXECUGEN2T-MX2-7 | 0.5 | no route | Throttle motor + (M+) | — | |
| W38 | OEM-E15-9 | MAXXECUGEN2T-MX2-24 | 0.5 | no route | Ignition switch (+12V) | — | |
| W39 | OEM-E11-19 | MAXXECUGEN2T-MX1-5 | 0.5 | no route | VVT oil-control valve RH (OCR+) | — | |
| W40 | OEM-E14-20 | MAXXECUGEN2T-MX1-6 | 0.5 | no route | VVT oil-control valve LH (OCV+) | — | |
| W41 | OEM-E13-10 | MAXXECUGEN2T-MX1-26 | 0.5 | no route | MAF signal (VG) | — | |
| W42 | OEM-E13-13 | MAXXECUGEN2T-MX1-27 | 0.5 | no route | Throttle position sensor 1 (VTA) | — | |
| W43 | OEM-E13-21 | MAXXECUGEN2T-MX1-28 | 0.5 | no route | Accelerator pedal position 1 (VPA) | — | |
| W44 | OEM-E13-20 | MAXXECUGEN2T-MX1-29 | 0.5 | no route | Throttle position sensor 2 (VTA2) | — | |
| W45 | OEM-E13-9 | MAXXECUGEN2T-MX1-30 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W46 | OEM-E13-14 | MAXXECUGEN2T-MX2-4 | 0.5 | no route | Engine coolant temp (THW) | — | |
| W47 | OEM-E15-10 | MAXXECUGEN2T-MX1-7 | 0.5 | no route | EFI main relay control (MREL) | — | |
| W48 | OEM-E15-5 | MAXXECUGEN2T-MX1-8 | 0.5 | no route | Fuel pump relay control (FC) | — | |
| W49 | OEM-E11-7 | MAXXECUGEN2T-MX2-12 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W50 | OEM-E11-8 | MAXXECUGEN2T-MX3-12 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W51 | OEM-E13-3 | MAXXECUGEN2T-MX1-17 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W52 | OEM-E13-4 | MAXXECUGEN2T-MX2-3 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W53 | OEM-E11-18 | MAXXECUGEN2T-MX2-5 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W54 | OEM-E11-27 | MAXXECUGEN2T-MX2-6 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W55 | OEM-E13-11 | MAXXECUGEN2T-MX2-13 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W56 | OEM-E13-12 | MAXXECUGEN2T-MX2-14 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W57 | OEM-E13-22 | MAXXECUGEN2T-MX2-15 | 0.5 | no route | Intake air temp (THA) | — | |
| W58 | OEM-E14-27 | MAXXECUGEN2T-MX1-23 | 0.5 | no route | Ignition confirmation 1 (IGF1) | — | |
| W59 | OEM-E14-28 | MAXXECUGEN2T-MX1-24 | 0.5 | no route | Ignition confirmation 2 (IGF2) | — | |
| W60 | OEM-E11-17 | MAXXECUGEN2T-MX3-21 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (6)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DBW_MOTOR_CURRENT | MAXXECUGEN2T-MX2-7 | Cannot confirm MaxxECU GEN2 TRACK can drive the throttle motor: MAXXECUGEN2T-MX2-7 "GP out 13 (H-BRIDGE 1)" is rated 5.0 A peak, but the motor stall current at OEM-E14-8 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | MAXXECUGEN2T-MX2-8 | Cannot confirm MaxxECU GEN2 TRACK can drive the throttle motor: MAXXECUGEN2T-MX2-8 "GP out 14 (H-BRIDGE 1)" is rated 5.0 A peak, but the motor stall current at OEM-E14-7 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| info | NET_FAMILY | OEM-E13-14 ↔ MAXXECUGEN2T-MX2-4 | OEM-E13-14 "Engine coolant temp (THW)" [temp_in] is wired to MAXXECUGEN2T-MX2-4 "AIN 6" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-E13-19 ↔ OEM-E14-22 | OEM-E13-19 "MAF ground (EVG)" [sensor_ground] is wired to OEM-E14-22 "Crank position sensor (NE−)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-E13-22 ↔ MAXXECUGEN2T-MX2-15 | OEM-E13-22 "Intake air temp (THA)" [temp_in] is wired to MAXXECUGEN2T-MX2-15 "AIN 11" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 12 optional OEM pins are not mapped: OEM-E11-28 VVT oil-control valve RH (OCR−); OEM-E11-5 Diagnostic test (TC); OEM-E12-12 Throttle magnetic clutch + (CL+); OEM-E13-15 VVT position sensor RH (VVR+); OEM-E13-16 VVT position sensor LH (VVL+); OEM-E13-23 VVT position sensor RH (VVR−); OEM-E13-24 VVT position sensor LH (VVL−); OEM-E13-8 Throttle magnetic clutch − (CL−); OEM-E14-19 VVT oil-control valve LH (OCV−); OEM-E14-29 ACIS induction VSV; OEM-E15-11 OBD-II / DLC3 data (SIL); OEM-E15-6 Check engine light (W) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E15-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-E15 1: Battery constant (+12V): MaxxECU MaxxECU GEN2 TRACK has no battery-constant input; not needed - OEM-E13 16: VVT position sensor LH (VVL+): no free cam_hall/cam_vr/frequency_in input on MaxxECU MaxxECU GEN2 TRACK - OEM-E13 24: VVT position sensor LH (VVL−): no free cam_hall/cam_vr/frequency_in input on MaxxECU MaxxECU GEN2 TRACK - OEM-E13 15: VVT position sensor RH (VVR+): no free cam_hall/cam_vr/frequency_in input on MaxxECU MaxxECU GEN2 TRACK - OEM-E13 23: VVT position sensor RH (VVR−): no free cam_hall/cam_vr/frequency_in input on MaxxECU MaxxECU GEN2 TRACK - OEM-E11 28: VVT oil-control valve RH (OCR−): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E12 12: Throttle magnetic clutch + (CL+): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E13 8: Throttle magnetic clutch − (CL−): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E14 19: VVT oil-control valve LH (OCV−): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E14 29: ACIS induction VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E15 6: Check engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 TRACK - OEM-E15 11: OBD-II / DLC3 data (SIL): no free k_line on MaxxECU MaxxECU GEN2 TRACK - OEM-E11 5: Diagnostic test (TC): no free k_line on MaxxECU MaxxECU GEN2 TRACK
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MaxxECU GEN2 pinout (RACE MX1–MX4 / TRACK MX1–MX3) | http://www.maxxecu.com/webhelp/wirings-maxxecu_gen2_pinout.html | archive | 2026-10-05 | f689b8b6b08f |
| 4 | vendor_doc | Toyota 1UZ-FE (VVT-i) engine manual M1UZ | http://www.epicmarine.com/docs/M1UZrm.pdf | — | — | — |
| 3 | community_copy | 1998 Lexus LS400 ECM terminal voltage chart (RM717U translation) | https://www.renrendoc.com/p-59096353.html | — | — | — |