Lexus SC400 1998-2000 (1UZ-FE VVT-i) → MoTeC M190 13190 (auto)
Lexus SC400 1998-2000 (1UZ-FE VVT-i) — MoTeC — M190
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 81 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | M190-B-H | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | M190-B-J | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-14V-1 | M190-B-K | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-14V-1 | M190-B-L | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E15-1 | M190-A-38 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E13-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E14-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | M190-B-G | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | M190-B-W | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | M190-B-X | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | M190-B-Y | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | M190-B-Z | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | M190-B-c | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E13-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E13-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | M190-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | M190-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | M190-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | M190-C-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | M190-C-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | M190-C-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | M190-C-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E13-2 | M190-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E14-23 | M190-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E14-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E14-10 | M190-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E13-16 | M190-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E13-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E13-15 | M190-C-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E13-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E14-18 | M190-C-51 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E14-17 | M190-C-44 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E14-11 | M190-C-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E14-12 | M190-C-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E14-13 | M190-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E14-14 | M190-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E14-15 | M190-C-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E14-16 | M190-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E14-25 | M190-C-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E14-26 | M190-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E13-5 | M190-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E13-6 | M190-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E14-1 | M190-B-U | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E14-2 | M190-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E14-3 | M190-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E14-4 | M190-B-V | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E14-5 | M190-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E14-6 | M190-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E14-7 | M190-B-B | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E14-8 | M190-B-A | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E11-19 | M190-B-b | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E14-20 | M190-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E13-10 | M190-C-42 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E13-13 | M190-C-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E13-21 | M190-C-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E13-20 | M190-C-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E13-9 | M190-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-E13-14 | M190-C-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E15-10 | M190-B-S | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E15-5 | M190-A-48 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-E11-7 | M190-B-a | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-E11-8 | M190-A-40 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-E13-3 | M190-B-T | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-E13-4 | M190-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-E11-28 | M190-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-E12-12 | M190-A-47 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-E13-8 | M190-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-E14-19 | M190-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-E14-29 | M190-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-E15-6 | M190-A-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-E11-18 | M190-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-E11-27 | M190-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-E13-11 | M190-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-E13-12 | M190-C-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-E13-22 | M190-C-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-E14-27 | M190-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-E14-28 | M190-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-E11-17 | M190-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | M190-A-16 | M190-A-38 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 2 | M190-A-16 | M190-B-H | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 3 | M190-A-18 | M190-A-16 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 4 | M190-A-18 | M190-A-38 | open (OL) | sensor ground must not touch +12 V supply | |
| 5 | M190-A-18 | M190-B-H | open (OL) | sensor ground must not touch +12 V supply | |
| 6 | M190-B-G | M190-A-16 | open (OL) | power ground must not touch 5 V sensor reference | |
| 7 | M190-B-G | M190-A-38 | open (OL) | power ground must not touch +12 V supply | |
| 8 | M190-B-G | M190-B-H | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
M190-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Low Side Injector 3 | — | W50 | — | 0.5 | OEM-E14-5 | — | — | — |
| 10 | Low Side Injector 8 | — | W68 | — | 0.5 | OEM-E11-28 | — | — | — |
| 11 | Peak Hold Injector 1 | — | W44 | — | 0.5 | OEM-E13-5 | — | — | — |
| 12 | Peak Hold Injector 2 | — | W47 | — | 0.5 | OEM-E14-2 | — | — | — |
| 13 | Analogue Voltage Input 11 | — | — | — | — | — | — | — | — |
| 14 | Digital Input 2 | — | W80 | — | 0.5 | OEM-E14-28 | — | — | — |
| 15 | RS232 Receive | — | — | — | — | — | — | — | — |
| 16 | Sensor 5.0V C3 | — | W26 | — | 0.5 | OEM-E13-2 | — | — | — |
| 17 | Low Side Injector 11 | — | W71 | — | 0.5 | OEM-E14-19 | — | — | — |
| 18 | Sensor 0V C1 | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor 0V C2 | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Low Side Injector 2 | — | W48 | — | 0.5 | OEM-E14-3 | — | — | — |
| 20 | Sensor 0V C3 | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital Input 1 | — | W79 | — | 0.5 | OEM-E14-27 | — | — | — |
| 22 | LIN Bus | — | — | — | — | — | — | — | — |
| 23 | RS232 Transmit | — | — | — | — | — | — | — | — |
| 24 | CAN Bus 2 High | — | — | — | — | — | — | — | — |
| 25 | Low Side Injector 7 | — | W67 | — | 0.5 | OEM-E13-4 | — | — | — |
| 26 | Peak Hold Injector 3 | — | W51 | — | 0.5 | OEM-E14-6 | — | — | — |
| 27 | Analogue Voltage Input 15 | — | — | — | — | — | — | — | — |
| 28 | Analogue Voltage Input 16 | — | — | — | — | — | — | — | — |
| 29 | Analogue Voltage Input 17 | — | — | — | — | — | — | — | — |
| 3 | Low Side Injector 1 | — | W45 | — | 0.5 | OEM-E13-6 | — | — | — |
| 30 | Digital Input 3 | — | W81 | — | 0.5 | OEM-E11-17 | — | — | — |
| 31 | CAN Bus 2 Low | — | — | — | — | — | — | — | — |
| 32 | Low Side Injector 10 | — | W70 | — | 0.5 | OEM-E13-8 | — | — | — |
| 33 | Peak Hold Injector 4 | — | W73 | — | 0.5 | OEM-E15-6 | — | — | — |
| 34 | Analogue Voltage Input 13 | — | — | — | — | — | — | — | — |
| 35 | Analogue Voltage Input 12 | — | — | — | — | — | — | — | — |
| 36 | Peak Hold Injector 7 | — | — | — | — | — | — | — | — |
| 37 | Digital Input 4 | — | — | — | — | — | — | — | — |
| 38 | Battery Backup | — | W8 | — | 0.85 | OEM-E15-1 | — | — | — |
| 39 | CAN Bus 3 High | — | — | — | — | — | — | — | — |
| 4 | Low Side Injector 12 | — | W72 | — | 0.5 | OEM-E14-29 | — | — | — |
| 40 | Low Side Injector 6 | — | W65 | — | 0.5 | OEM-E11-8 | — | — | — |
| 41 | Analogue Voltage Input 14 | — | — | — | — | — | — | — | — |
| 42 | Peak Hold Injector 9 | — | — | — | — | — | — | — | — |
| 43 | Peak Hold Injector 10 | — | — | — | — | — | — | — | — |
| 44 | Peak Hold Injector 6 | — | — | — | — | — | — | — | — |
| 45 | Peak Hold Injector 5 | — | — | — | — | — | — | — | — |
| 46 | CAN Bus 3 Low | — | — | — | — | — | — | — | — |
| 47 | Low Side Injector 9 | — | W69 | — | 0.5 | OEM-E12-12 | — | — | — |
| 48 | Low Side Injector 5 | — | W63 | — | 0.5 | OEM-E15-5 | — | — | — |
| 49 | Peak Hold Injector 11 | — | — | — | — | — | — | — | — |
| 5 | Low Side Injector 4 | — | W55 | — | 0.5 | OEM-E14-20 | — | — | — |
| 50 | Peak Hold Injector 12 | — | — | — | — | — | — | — | — |
| 51 | Peak Hold Injector 8 | — | — | — | — | — | — | — | — |
| 52 | Low Side Ignition 12 | — | — | — | — | — | — | — | — |
| 53 | Low Side Ignition 9 | — | — | — | — | — | — | — | — |
| 54 | Low Side Ignition 10 | — | — | — | — | — | — | — | — |
| 55 | Low Side Ignition 11 | — | — | — | — | — | — | — | — |
| 6 | Lambda Narrow Input 2 | — | W75 | — | 0.5 | OEM-E11-27 | — | — | — |
| 7 | Lambda Narrow Input 1 | — | W74 | — | 0.5 | OEM-E11-18 | — | — | — |
| 8 | Sensor 5.0V C1 | — | — | — | — | — | — | — | — |
| 9 | Sensor 5.0V C2 | — | — | — | — | — | — | — | — |
M190-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Half Bridge Output 1 | — | W53 | — | 0.5 | OEM-E14-8 | — | — | — |
| B | Half Bridge Output 2 | — | W52 | — | 0.5 | OEM-E14-7 | — | — | — |
| C | Half Bridge Output 3 | — | — | — | — | — | — | — | — |
| D | Half Bridge Output 4 | — | — | — | — | — | — | — | — |
| E | Half Bridge Output 5 | — | — | — | — | — | — | — | — |
| F | Half Bridge Output 6 | — | — | — | — | — | — | — | — |
| G | Battery Negative 1 | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| H | Battery Positive 1 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| J | Battery Positive 2 | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| K | Battery Positive 3 | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
| L | Battery Positive 4 | — | W7 | — | 0.85 | SP-14V-1 | — | — | — |
| M | Half Bridge Output 10 | — | — | — | — | — | — | — | — |
| N | Half Bridge Output 9 | — | — | — | — | — | — | — | — |
| P | Half Bridge Output 8 | — | — | — | — | — | — | — | — |
| R | Half Bridge Output 7 | — | — | — | — | — | — | — | — |
| S | Low Side Injector 4 | — | W62 | — | 0.5 | OEM-E15-10 | — | — | — |
| T | Low Side Injector 6 | — | W66 | — | 0.5 | OEM-E13-3 | — | — | — |
| U | Low Side Injector 1 | — | W46 | — | 0.5 | OEM-E14-1 | — | — | — |
| V | Low Side Injector 2 | — | W49 | — | 0.5 | OEM-E14-4 | — | — | — |
| W | Battery Negative 2 | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| X | Battery Negative 3 | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| Y | Battery Negative 4 | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| Z | Battery Negative 5 | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| a | Low Side Injector 5 | — | W64 | — | 0.5 | OEM-E11-7 | — | — | — |
| b | Low Side Injector 3 | — | W54 | — | 0.5 | OEM-E11-19 | — | — | — |
| c | Battery Negative 6 | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
M190-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Low Side Ignition 4 | — | W39 | — | 0.5 | OEM-E14-14 | — | — | — |
| 10 | Universal Digital Input 8 | — | — | — | — | — | — | — | — |
| 11 | Analogue Voltage Input 6 | — | W76 | — | 0.5 | OEM-E13-11 | — | — | — |
| 12 | Analogue Voltage Input 7 | — | W77 | — | 0.5 | OEM-E13-12 | — | — | — |
| 13 | Analogue Voltage Input 9 | — | — | — | — | — | — | — | — |
| 14 | Sensor 0V A1 | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Sensor 0V A2 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Low Side Ignition 1 | — | W36 | — | 0.5 | OEM-E14-11 | — | — | — |
| 17 | Universal Digital Input 7 | — | — | — | — | — | — | — | — |
| 18 | Universal Digital Input 1 | — | W27 | — | 0.5 | OEM-E14-23 | — | — | — |
| 19 | Universal Digital Input 12 | — | — | — | — | — | — | — | — |
| 2 | Low Side Ignition 3 | — | W38 | — | 0.5 | OEM-E14-13 | — | — | — |
| 20 | Universal Digital Input 11 | — | — | — | — | — | — | — | — |
| 21 | Universal Digital Input 10 | — | — | — | — | — | — | — | — |
| 22 | Universal Digital Input 9 | — | — | — | — | — | — | — | — |
| 23 | Sensor 0V B1 | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | CAN Bus 1 High | — | — | — | — | — | — | — | — |
| 25 | Universal Digital Input 3 | — | W30 | — | 0.5 | OEM-E13-16 | — | — | — |
| 26 | Ethernet Receive - | — | — | — | — | — | — | — | — |
| 27 | Universal Digital Input 4 | — | W32 | — | 0.5 | OEM-E13-15 | — | — | — |
| 28 | Analogue Voltage Input 4 | — | W59 | — | 0.5 | OEM-E13-20 | — | — | — |
| 29 | Analogue Voltage Input 5 | — | W60 | — | 0.5 | OEM-E13-9 | — | — | — |
| 3 | Low Side Ignition 8 | — | W43 | — | 0.5 | OEM-E14-26 | — | — | — |
| 30 | Sensor 0V B2 | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | CAN Bus 1 Low | — | — | — | — | — | — | — | — |
| 32 | Universal Digital Input 2 | — | W29 | — | 0.5 | OEM-E14-10 | — | — | — |
| 33 | Ethernet Receive + | — | — | — | — | — | — | — | — |
| 34 | Ethernet Transmit - | — | — | — | — | — | — | — | — |
| 35 | Analogue Voltage Input 3 | — | W58 | — | 0.5 | OEM-E13-21 | — | — | — |
| 36 | Analogue Voltage Input 2 | — | W57 | — | 0.5 | OEM-E13-13 | — | — | — |
| 37 | Analogue Temperature Input 1 | — | W61 | — | 0.5 | OEM-E13-14 | — | — | — |
| 38 | Analogue Temperature Input 3 | — | — | — | — | — | — | — | — |
| 39 | Analogue Temperature Input 2 | — | W78 | — | 0.5 | OEM-E13-22 | — | — | — |
| 4 | Low Side Ignition 6 | — | W41 | — | 0.5 | OEM-E14-16 | — | — | — |
| 40 | Universal Digital Input 5 | — | — | — | — | — | — | — | — |
| 41 | Ethernet Transmit + | — | — | — | — | — | — | — | — |
| 42 | Analogue Voltage Input 1 | — | W56 | — | 0.5 | OEM-E13-10 | — | — | — |
| 43 | Knock Input 3 | — | — | — | — | — | — | — | — |
| 44 | Knock Input 2 | — | W35 | — | 0.5 | OEM-E14-17 | — | — | — |
| 45 | Analogue Temperature Input 5 | — | — | — | — | — | — | — | — |
| 46 | Analogue Temperature Input 4 | — | — | — | — | — | — | — | — |
| 47 | Universal Digital Input 6 | — | — | — | — | — | — | — | — |
| 48 | Sensor 5.0V A1 | — | — | — | — | — | — | — | — |
| 49 | Knock Input 4 | — | — | — | — | — | — | — | — |
| 5 | Low Side Ignition 5 | — | W40 | — | 0.5 | OEM-E14-15 | — | — | — |
| 50 | Sensor 5.0V B1 | — | — | — | — | — | — | — | — |
| 51 | Knock Input 1 | — | W34 | — | 0.5 | OEM-E14-18 | — | — | — |
| 52 | Analogue Temperature Input 6 | — | — | — | — | — | — | — | — |
| 53 | Sensor 5.0V A2 | — | — | — | — | — | — | — | — |
| 54 | Sensor 6.3V | — | — | — | — | — | — | — | — |
| 55 | Sensor 5.0V B2 | — | — | — | — | — | — | — | — |
| 6 | Analogue Voltage Input 8 | — | — | — | — | — | — | — | — |
| 7 | Analogue Voltage Input 10 | — | — | — | — | — | — | — | — |
| 8 | Low Side Ignition 2 | — | W37 | — | 0.5 | OEM-E14-12 | — | — | — |
| 9 | Low Side Ignition 7 | — | W42 | — | 0.5 | OEM-E14-25 | — | — | — |
OEM-E11
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 17 | Starter signal (STA) | — | W81 | — | 0.5 | M190-A-30 | — | — | — |
| 18 | O2 sensor signal (bank unconfirmed) | — | W74 | — | 0.5 | M190-A-7 | — | — | — |
| 19 | VVT oil-control valve RH (OCR+) | — | W54 | — | 0.5 | M190-B-b | — | — | — |
| 27 | O2 sensor signal (bank unconfirmed) | — | W75 | — | 0.5 | M190-A-6 | — | — | — |
| 28 | VVT oil-control valve RH (OCR−) | — | W68 | — | 0.5 | M190-A-10 | — | — | — |
| 5 | Diagnostic test (TC) | — | — | — | — | — | — | — | — |
| 7 | O2 sensor heater (bank unconfirmed) | — | W64 | — | 0.5 | M190-B-a | — | — | — |
| 8 | O2 sensor heater (bank unconfirmed) | — | W65 | — | 0.5 | M190-A-40 | — | — | — |
OEM-E12
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 12 | Throttle magnetic clutch + (CL+) | — | W69 | — | 0.5 | M190-A-47 | — | — | — |
OEM-E13
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | MAF signal (VG) | — | W56 | — | 0.5 | M190-C-42 | — | — | — |
| 11 | O2 sensor signal (bank unconfirmed) | — | W76 | — | 0.5 | M190-C-11 | — | — | — |
| 12 | O2 sensor signal (bank unconfirmed) | — | W77 | — | 0.5 | M190-C-12 | — | — | — |
| 13 | Throttle position sensor 1 (VTA) | — | W57 | — | 0.5 | M190-C-36 | — | — | — |
| 14 | Engine coolant temp (THW) | — | W61 | — | 0.5 | M190-C-37 | — | — | — |
| 15 | VVT position sensor RH (VVR+) | — | W32 | — | 0.5 | M190-C-27 | — | — | — |
| 16 | VVT position sensor LH (VVL+) | — | W30 | — | 0.5 | M190-C-25 | — | — | — |
| 17 | ECU ground (E1) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | +5V sensor reference (VC) | — | W26 | — | 0.5 | M190-A-16 | — | — | — |
| 20 | Throttle position sensor 2 (VTA2) | — | W59 | — | 0.5 | M190-C-28 | — | — | — |
| 21 | Accelerator pedal position 1 (VPA) | — | W58 | — | 0.5 | M190-C-35 | — | — | — |
| 22 | Intake air temp (THA) | — | W78 | — | 0.5 | M190-C-39 | — | — | — |
| 23 | VVT position sensor RH (VVR−) | — | W33 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | VVT position sensor LH (VVL−) | — | W31 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | O2 sensor heater (bank unconfirmed) | — | W66 | — | 0.5 | M190-B-T | — | — | — |
| 4 | O2 sensor heater (bank unconfirmed) | — | W67 | — | 0.5 | M190-A-25 | — | — | — |
| 5 | Injector 1 (cyl 1) | — | W44 | — | 0.5 | M190-A-11 | — | — | — |
| 6 | Injector 2 (cyl 2) | — | W45 | — | 0.5 | M190-A-3 | — | — | — |
| 8 | Throttle magnetic clutch − (CL−) | — | W70 | — | 0.5 | M190-A-32 | — | — | — |
| 9 | Accelerator pedal position 2 (VPA2) | — | W60 | — | 0.5 | M190-C-29 | — | — | — |
OEM-E14
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (cyl 3) | — | W46 | — | 0.5 | M190-B-U | — | — | — |
| 10 | Camshaft position sensor (G2) | — | W29 | — | 0.5 | M190-C-32 | — | — | — |
| 11 | Ignition coil 1 (IGT1) | — | W36 | — | 0.5 | M190-C-16 | — | — | — |
| 12 | Ignition coil 2 (IGT2) | — | W37 | — | 0.5 | M190-C-8 | — | — | — |
| 13 | Ignition coil 3 (IGT3) | — | W38 | — | 0.5 | M190-C-2 | — | — | — |
| 14 | Ignition coil 4 (IGT4) | — | W39 | — | 0.5 | M190-C-1 | — | — | — |
| 15 | Ignition coil 5 (IGT5) | — | W40 | — | 0.5 | M190-C-5 | — | — | — |
| 16 | Ignition coil 6 (IGT6) | — | W41 | — | 0.5 | M190-C-4 | — | — | — |
| 17 | Knock sensor RH (KNKR) | — | W35 | — | 0.5 | M190-C-44 | — | — | — |
| 18 | Knock sensor LH (KNKL) | — | W34 | — | 0.5 | M190-C-51 | — | — | — |
| 19 | VVT oil-control valve LH (OCV−) | — | W71 | — | 0.5 | M190-A-17 | — | — | — |
| 2 | Injector 4 (cyl 4) | — | W47 | — | 0.5 | M190-A-12 | — | — | — |
| 20 | VVT oil-control valve LH (OCV+) | — | W55 | — | 0.5 | M190-A-5 | — | — | — |
| 21 | Power/injector ground (E01) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank position sensor (NE−) | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Crank position sensor (NE+) | — | W27 | — | 0.5 | M190-C-18 | — | — | — |
| 25 | Ignition coil 7 (IGT7) | — | W42 | — | 0.5 | M190-C-9 | — | — | — |
| 26 | Ignition coil 8 (IGT8) | — | W43 | — | 0.5 | M190-C-3 | — | — | — |
| 27 | Ignition confirmation 1 (IGF1) | — | W79 | — | 0.5 | M190-A-21 | — | — | — |
| 28 | Ignition confirmation 2 (IGF2) | — | W80 | — | 0.5 | M190-A-14 | — | — | — |
| 29 | ACIS induction VSV | — | W72 | — | 0.5 | M190-A-4 | — | — | — |
| 3 | Injector 5 (cyl 5) | — | W48 | — | 0.5 | M190-A-2 | — | — | — |
| 4 | Injector 6 (cyl 6) | — | W49 | — | 0.5 | M190-B-V | — | — | — |
| 5 | Injector 7 (cyl 7) | — | W50 | — | 0.5 | M190-A-1 | — | — | — |
| 6 | Injector 8 (cyl 8) | — | W51 | — | 0.5 | M190-A-26 | — | — | — |
| 7 | Throttle motor − (M−) | — | W52 | — | 0.5 | M190-B-B | — | — | — |
| 8 | Throttle motor + (M+) | — | W53 | — | 0.5 | M190-B-A | — | — | — |
OEM-E15
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (+12V) | — | W8 | — | 0.85 | M190-A-38 | — | — | — |
| 10 | EFI main relay control (MREL) | — | W62 | — | 0.5 | M190-B-S | — | — | — |
| 11 | OBD-II / DLC3 data (SIL) | — | — | — | — | — | — | — | — |
| 16 | ECM power (EFI relay +B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 5 | Fuel pump relay control (FC) | — | W63 | — | 0.5 | M190-A-48 | — | — | — |
| 6 | Check engine light (W) | — | W73 | — | 0.5 | M190-A-33 | — | — | — |
| 7 | ECM power feed (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | ECM power (EFI relay +B1) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (+12V) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-E13-18 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-E13-19 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | M190-A-18 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | M190-A-19 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | M190-A-20 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | M190-C-14 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | M190-C-15 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | M190-C-23 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | M190-C-30 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-E14-22 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | OEM-E13-24 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | OEM-E13-23 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E15-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E15-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-E15-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | M190-B-H | — | — | — |
| 1 | — | — | W5 | — | 0.85 | M190-B-J | — | — | — |
| 1 | — | — | W6 | — | 0.85 | M190-B-K | — | — | — |
| 1 | — | — | W7 | — | 0.85 | M190-B-L | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W9 | — | 0.85 | OEM-E13-17 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-E14-21 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | M190-B-G | — | — | — |
| 1 | — | — | W12 | — | 0.85 | M190-B-W | — | — | — |
| 1 | — | — | W13 | — | 0.85 | M190-B-X | — | — | — |
| 1 | — | — | W14 | — | 0.85 | M190-B-Y | — | — | — |
| 1 | — | — | W15 | — | 0.85 | M190-B-Z | — | — | — |
| 1 | — | — | W16 | — | 0.85 | M190-B-c | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E11-17 | Starter signal (STA) | digital_in | M190-A-30 | Digital Input 3 | digital_in | corroborated | |
| OEM-E11-18 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | M190-A-7 | Lambda Narrow Input 1 | lambda_nb_in | corroborated | |
| OEM-E11-19 | VVT oil-control valve RH (OCR+) | low_side_out | M190-B-b | Low Side Injector 3 | injector_out | corroborated | |
| OEM-E11-27 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | M190-A-6 | Lambda Narrow Input 2 | lambda_nb_in | corroborated | |
| OEM-E11-28 | VVT oil-control valve RH (OCR−) | low_side_out | M190-A-10 | Low Side Injector 8 | injector_out | corroborated | |
| OEM-E11-5 | Diagnostic test (TC) | serial | — | — | — | corroborated | |
| OEM-E11-7 | O2 sensor heater (bank unconfirmed) | low_side_out | M190-B-a | Low Side Injector 5 | injector_out | corroborated | |
| OEM-E11-8 | O2 sensor heater (bank unconfirmed) | low_side_out | M190-A-40 | Low Side Injector 6 | injector_out | corroborated | |
| OEM-E12-12 | Throttle magnetic clutch + (CL+) | low_side_out | M190-A-47 | Low Side Injector 9 | injector_out | corroborated | |
| OEM-E13-10 | MAF signal (VG) | analog_in | M190-C-42 | Analogue Voltage Input 1 | analog_in | corroborated | |
| OEM-E13-11 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | M190-C-11 | Analogue Voltage Input 6 | analog_in | corroborated | |
| OEM-E13-12 | O2 sensor signal (bank unconfirmed) | lambda_nb_in | M190-C-12 | Analogue Voltage Input 7 | analog_in | corroborated | |
| OEM-E13-13 | Throttle position sensor 1 (VTA) | analog_in | M190-C-36 | Analogue Voltage Input 2 | analog_in | corroborated | |
| OEM-E13-14 | Engine coolant temp (THW) | temp_in | M190-C-37 | Analogue Temperature Input 1 | temp_in | corroborated | |
| OEM-E13-15 | VVT position sensor RH (VVR+) | trigger_in | M190-C-27 | Universal Digital Input 4 | digital_in | corroborated | |
| OEM-E13-16 | VVT position sensor LH (VVL+) | trigger_in | M190-C-25 | Universal Digital Input 3 | digital_in | corroborated | |
| OEM-E13-17 | ECU ground (E1) | ground | M190-B-G + M190-B-W + M190-B-X + M190-B-Y + M190-B-Z + M190-B-c | Battery Negative 1 + Battery Negative 2 + Battery Negative 3 + Battery Negative 4 + Battery Negative 5 + Battery Negative 6 | ground | corroborated | |
| OEM-E13-18 | Sensor ground (E2) | sensor_ground | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | corroborated | |
| OEM-E13-19 | MAF ground (EVG) | sensor_ground | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | corroborated | |
| OEM-E13-2 | +5V sensor reference (VC) | vref | M190-A-16 | Sensor 5.0V C3 | vref | corroborated | |
| OEM-E13-20 | Throttle position sensor 2 (VTA2) | analog_in | M190-C-28 | Analogue Voltage Input 4 | analog_in | corroborated | |
| OEM-E13-21 | Accelerator pedal position 1 (VPA) | analog_in | M190-C-35 | Analogue Voltage Input 3 | analog_in | corroborated | |
| OEM-E13-22 | Intake air temp (THA) | temp_in | M190-C-39 | Analogue Temperature Input 2 | temp_in | corroborated | |
| OEM-E13-23 | VVT position sensor RH (VVR−) | trigger_in | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | corroborated | |
| OEM-E13-24 | VVT position sensor LH (VVL−) | trigger_in | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | corroborated | |
| OEM-E13-3 | O2 sensor heater (bank unconfirmed) | low_side_out | M190-B-T | Low Side Injector 6 | injector_out | corroborated | |
| OEM-E13-4 | O2 sensor heater (bank unconfirmed) | low_side_out | M190-A-25 | Low Side Injector 7 | injector_out | corroborated | |
| OEM-E13-5 | Injector 1 (cyl 1) | injector_out | M190-A-11 | Peak Hold Injector 1 | injector_out | corroborated | |
| OEM-E13-6 | Injector 2 (cyl 2) | injector_out | M190-A-3 | Low Side Injector 1 | injector_out | corroborated | |
| OEM-E13-8 | Throttle magnetic clutch − (CL−) | low_side_out | M190-A-32 | Low Side Injector 10 | injector_out | corroborated | |
| OEM-E13-9 | Accelerator pedal position 2 (VPA2) | analog_in | M190-C-29 | Analogue Voltage Input 5 | analog_in | corroborated | |
| OEM-E14-1 | Injector 3 (cyl 3) | injector_out | M190-B-U | Low Side Injector 1 | injector_out | corroborated | |
| OEM-E14-10 | Camshaft position sensor (G2) | trigger_in | M190-C-32 | Universal Digital Input 2 | digital_in | corroborated | |
| OEM-E14-11 | Ignition coil 1 (IGT1) | ignition_out | M190-C-16 | Low Side Ignition 1 | ignition_out | corroborated | |
| OEM-E14-12 | Ignition coil 2 (IGT2) | ignition_out | M190-C-8 | Low Side Ignition 2 | ignition_out | corroborated | |
| OEM-E14-13 | Ignition coil 3 (IGT3) | ignition_out | M190-C-2 | Low Side Ignition 3 | ignition_out | corroborated | |
| OEM-E14-14 | Ignition coil 4 (IGT4) | ignition_out | M190-C-1 | Low Side Ignition 4 | ignition_out | corroborated | |
| OEM-E14-15 | Ignition coil 5 (IGT5) | ignition_out | M190-C-5 | Low Side Ignition 5 | ignition_out | corroborated | |
| OEM-E14-16 | Ignition coil 6 (IGT6) | ignition_out | M190-C-4 | Low Side Ignition 6 | ignition_out | corroborated | |
| OEM-E14-17 | Knock sensor RH (KNKR) | knock_in | M190-C-44 | Knock Input 2 | knock_in | corroborated | |
| OEM-E14-18 | Knock sensor LH (KNKL) | knock_in | M190-C-51 | Knock Input 1 | knock_in | corroborated | |
| OEM-E14-19 | VVT oil-control valve LH (OCV−) | low_side_out | M190-A-17 | Low Side Injector 11 | injector_out | corroborated | |
| OEM-E14-2 | Injector 4 (cyl 4) | injector_out | M190-A-12 | Peak Hold Injector 2 | injector_out | corroborated | |
| OEM-E14-20 | VVT oil-control valve LH (OCV+) | low_side_out | M190-A-5 | Low Side Injector 4 | injector_out | corroborated | |
| OEM-E14-21 | Power/injector ground (E01) | ground | M190-B-G + M190-B-W + M190-B-X + M190-B-Y + M190-B-Z + M190-B-c | Battery Negative 1 + Battery Negative 2 + Battery Negative 3 + Battery Negative 4 + Battery Negative 5 + Battery Negative 6 | ground | corroborated | |
| OEM-E14-22 | Crank position sensor (NE−) | trigger_in | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | corroborated | |
| OEM-E14-23 | Crank position sensor (NE+) | trigger_in | M190-C-18 | Universal Digital Input 1 | digital_in | corroborated | |
| OEM-E14-25 | Ignition coil 7 (IGT7) | ignition_out | M190-C-9 | Low Side Ignition 7 | ignition_out | corroborated | |
| OEM-E14-26 | Ignition coil 8 (IGT8) | ignition_out | M190-C-3 | Low Side Ignition 8 | ignition_out | corroborated | |
| OEM-E14-27 | Ignition confirmation 1 (IGF1) | digital_in | M190-A-21 | Digital Input 1 | digital_in | corroborated | |
| OEM-E14-28 | Ignition confirmation 2 (IGF2) | digital_in | M190-A-14 | Digital Input 2 | digital_in | corroborated | |
| OEM-E14-29 | ACIS induction VSV | low_side_out | M190-A-4 | Low Side Injector 12 | injector_out | corroborated | |
| OEM-E14-3 | Injector 5 (cyl 5) | injector_out | M190-A-2 | Low Side Injector 2 | injector_out | corroborated | |
| OEM-E14-4 | Injector 6 (cyl 6) | injector_out | M190-B-V | Low Side Injector 2 | injector_out | corroborated | |
| OEM-E14-5 | Injector 7 (cyl 7) | injector_out | M190-A-1 | Low Side Injector 3 | injector_out | corroborated | |
| OEM-E14-6 | Injector 8 (cyl 8) | injector_out | M190-A-26 | Peak Hold Injector 3 | injector_out | corroborated | |
| OEM-E14-7 | Throttle motor − (M−) | hbridge_out | M190-B-B | Half Bridge Output 2 | hbridge_out | corroborated | |
| OEM-E14-8 | Throttle motor + (M+) | hbridge_out | M190-B-A | Half Bridge Output 1 | hbridge_out | corroborated | |
| OEM-E15-1 | Battery constant (+12V) | power_in | M190-A-38 | Battery Backup | power_in | corroborated | |
| OEM-E15-10 | EFI main relay control (MREL) | low_side_out | M190-B-S | Low Side Injector 4 | injector_out | corroborated | |
| OEM-E15-11 | OBD-II / DLC3 data (SIL) | serial | — | — | — | corroborated | |
| OEM-E15-16 | ECM power (EFI relay +B) | power_in | M190-B-H + M190-B-J + M190-B-K + M190-B-L | Battery Positive 1 + Battery Positive 2 + Battery Positive 3 + Battery Positive 4 | power_in | corroborated | |
| OEM-E15-5 | Fuel pump relay control (FC) | low_side_out | M190-A-48 | Low Side Injector 5 | injector_out | corroborated | |
| OEM-E15-6 | Check engine light (W) | low_side_out | M190-A-33 | Peak Hold Injector 4 | injector_out | corroborated | |
| OEM-E15-7 | ECM power feed (+BM) | power_in | M190-B-H + M190-B-J + M190-B-K + M190-B-L | Battery Positive 1 + Battery Positive 2 + Battery Positive 3 + Battery Positive 4 | power_in | corroborated | |
| OEM-E15-8 | ECM power (EFI relay +B1) | power_in | M190-B-H + M190-B-J + M190-B-K + M190-B-L | Battery Positive 1 + Battery Positive 2 + Battery Positive 3 + Battery Positive 4 | power_in | corroborated | |
| OEM-E15-9 | Ignition switch (+12V) | digital_in | — | — | — | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E15-16 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B) | — | |
| W2 | OEM-E15-7 | SP-14V-1 | 0.85 | no route | ECM power feed (+BM) | — | |
| W3 | OEM-E15-8 | SP-14V-1 | 0.85 | no route | ECM power (EFI relay +B1) | — | |
| W4 | SP-14V-1 | M190-B-H | 0.85 | no route | Battery Positive 1 | — | |
| W5 | SP-14V-1 | M190-B-J | 0.85 | no route | Battery Positive 2 | — | |
| W6 | SP-14V-1 | M190-B-K | 0.85 | no route | Battery Positive 3 | — | |
| W7 | SP-14V-1 | M190-B-L | 0.85 | no route | Battery Positive 4 | — | |
| W8 | OEM-E15-1 | M190-A-38 | 0.85 | no route | Battery constant (+12V) | — | |
| W9 | OEM-E13-17 | SP-GND-1 | 0.85 | no route | ECU ground (E1) | — | |
| W10 | OEM-E14-21 | SP-GND-1 | 0.85 | no route | Power/injector ground (E01) | — | |
| W11 | SP-GND-1 | M190-B-G | 0.85 | no route | Battery Negative 1 | — | |
| W12 | SP-GND-1 | M190-B-W | 0.85 | no route | Battery Negative 2 | — | |
| W13 | SP-GND-1 | M190-B-X | 0.85 | no route | Battery Negative 3 | — | |
| W14 | SP-GND-1 | M190-B-Y | 0.85 | no route | Battery Negative 4 | — | |
| W15 | SP-GND-1 | M190-B-Z | 0.85 | no route | Battery Negative 5 | — | |
| W16 | SP-GND-1 | M190-B-c | 0.85 | no route | Battery Negative 6 | — | |
| W17 | OEM-E13-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W18 | OEM-E13-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W19 | SP-0V-1 | M190-A-18 | 0.5 | no route | Sensor 0V C1 | — | |
| W20 | SP-0V-1 | M190-A-19 | 0.5 | no route | Sensor 0V C2 | — | |
| W21 | SP-0V-1 | M190-A-20 | 0.5 | no route | Sensor 0V C3 | — | |
| W22 | SP-0V-1 | M190-C-14 | 0.5 | no route | Sensor 0V A1 | — | |
| W23 | SP-0V-1 | M190-C-15 | 0.5 | no route | Sensor 0V A2 | — | |
| W24 | SP-0V-1 | M190-C-23 | 0.5 | no route | Sensor 0V B1 | — | |
| W25 | SP-0V-1 | M190-C-30 | 0.5 | no route | Sensor 0V B2 | — | |
| W26 | OEM-E13-2 | M190-A-16 | 0.5 | no route | +5V sensor reference (VC) | — | |
| W27 | OEM-E14-23 | M190-C-18 | 0.5 | no route | Crank position sensor (NE+) | — | |
| W28 | OEM-E14-22 | SP-0V-1 | 0.5 | no route | Crank position sensor (NE−) | — | |
| W29 | OEM-E14-10 | M190-C-32 | 0.5 | no route | Camshaft position sensor (G2) | — | |
| W30 | OEM-E13-16 | M190-C-25 | 0.5 | no route | VVT position sensor LH (VVL+) | — | |
| W31 | OEM-E13-24 | SP-0V-1 | 0.5 | no route | VVT position sensor LH (VVL−) | — | |
| W32 | OEM-E13-15 | M190-C-27 | 0.5 | no route | VVT position sensor RH (VVR+) | — | |
| W33 | OEM-E13-23 | SP-0V-1 | 0.5 | no route | VVT position sensor RH (VVR−) | — | |
| W34 | OEM-E14-18 | M190-C-51 | 0.5 | no route | Knock sensor LH (KNKL) | — | |
| W35 | OEM-E14-17 | M190-C-44 | 0.5 | no route | Knock sensor RH (KNKR) | — | |
| W36 | OEM-E14-11 | M190-C-16 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W37 | OEM-E14-12 | M190-C-8 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W38 | OEM-E14-13 | M190-C-2 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W39 | OEM-E14-14 | M190-C-1 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W40 | OEM-E14-15 | M190-C-5 | 0.5 | no route | Ignition coil 5 (IGT5) | — | |
| W41 | OEM-E14-16 | M190-C-4 | 0.5 | no route | Ignition coil 6 (IGT6) | — | |
| W42 | OEM-E14-25 | M190-C-9 | 0.5 | no route | Ignition coil 7 (IGT7) | — | |
| W43 | OEM-E14-26 | M190-C-3 | 0.5 | no route | Ignition coil 8 (IGT8) | — | |
| W44 | OEM-E13-5 | M190-A-11 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W45 | OEM-E13-6 | M190-A-3 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W46 | OEM-E14-1 | M190-B-U | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W47 | OEM-E14-2 | M190-A-12 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W48 | OEM-E14-3 | M190-A-2 | 0.5 | no route | Injector 5 (cyl 5) | — | |
| W49 | OEM-E14-4 | M190-B-V | 0.5 | no route | Injector 6 (cyl 6) | — | |
| W50 | OEM-E14-5 | M190-A-1 | 0.5 | no route | Injector 7 (cyl 7) | — | |
| W51 | OEM-E14-6 | M190-A-26 | 0.5 | no route | Injector 8 (cyl 8) | — | |
| W52 | OEM-E14-7 | M190-B-B | 0.5 | no route | Throttle motor − (M−) | — | |
| W53 | OEM-E14-8 | M190-B-A | 0.5 | no route | Throttle motor + (M+) | — | |
| W54 | OEM-E11-19 | M190-B-b | 0.5 | no route | VVT oil-control valve RH (OCR+) | — | |
| W55 | OEM-E14-20 | M190-A-5 | 0.5 | no route | VVT oil-control valve LH (OCV+) | — | |
| W56 | OEM-E13-10 | M190-C-42 | 0.5 | no route | MAF signal (VG) | — | |
| W57 | OEM-E13-13 | M190-C-36 | 0.5 | no route | Throttle position sensor 1 (VTA) | — | |
| W58 | OEM-E13-21 | M190-C-35 | 0.5 | no route | Accelerator pedal position 1 (VPA) | — | |
| W59 | OEM-E13-20 | M190-C-28 | 0.5 | no route | Throttle position sensor 2 (VTA2) | — | |
| W60 | OEM-E13-9 | M190-C-29 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W61 | OEM-E13-14 | M190-C-37 | 0.5 | no route | Engine coolant temp (THW) | — | |
| W62 | OEM-E15-10 | M190-B-S | 0.5 | no route | EFI main relay control (MREL) | — | |
| W63 | OEM-E15-5 | M190-A-48 | 0.5 | no route | Fuel pump relay control (FC) | — | |
| W64 | OEM-E11-7 | M190-B-a | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W65 | OEM-E11-8 | M190-A-40 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W66 | OEM-E13-3 | M190-B-T | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W67 | OEM-E13-4 | M190-A-25 | 0.5 | no route | O2 sensor heater (bank unconfirmed) | — | |
| W68 | OEM-E11-28 | M190-A-10 | 0.5 | no route | VVT oil-control valve RH (OCR−) | — | |
| W69 | OEM-E12-12 | M190-A-47 | 0.5 | no route | Throttle magnetic clutch + (CL+) | — | |
| W70 | OEM-E13-8 | M190-A-32 | 0.5 | no route | Throttle magnetic clutch − (CL−) | — | |
| W71 | OEM-E14-19 | M190-A-17 | 0.5 | no route | VVT oil-control valve LH (OCV−) | — | |
| W72 | OEM-E14-29 | M190-A-4 | 0.5 | no route | ACIS induction VSV | — | |
| W73 | OEM-E15-6 | M190-A-33 | 0.5 | no route | Check engine light (W) | — | |
| W74 | OEM-E11-18 | M190-A-7 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W75 | OEM-E11-27 | M190-A-6 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W76 | OEM-E13-11 | M190-C-11 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W77 | OEM-E13-12 | M190-C-12 | 0.5 | no route | O2 sensor signal (bank unconfirmed) | — | |
| W78 | OEM-E13-22 | M190-C-39 | 0.5 | no route | Intake air temp (THA) | — | |
| W79 | OEM-E14-27 | M190-A-21 | 0.5 | no route | Ignition confirmation 1 (IGF1) | — | |
| W80 | OEM-E14-28 | M190-A-14 | 0.5 | no route | Ignition confirmation 2 (IGF2) | — | |
| W81 | OEM-E11-17 | M190-A-30 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (23)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-E15-9 | Required OEM function "Ignition switch (+12V)" (digital_in) is not connected to the new ECU. |
| warn | DBW_MOTOR_CURRENT | M190-B-A | Cannot confirm M190 can drive the throttle motor: M190-B-A "Half Bridge Output 1" is rated 12.0 A peak, but the motor stall current at OEM-E14-8 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | M190-B-B | Cannot confirm M190 can drive the throttle motor: M190-B-B "Half Bridge Output 2" is rated 12.0 A peak, but the motor stall current at OEM-E14-7 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | NET_FAMILY | OEM-E13-15 ↔ M190-C-27 | OEM-E13-15 "VVT position sensor RH (VVR+)" [trigger_in] is wired to M190-C-27 "Universal Digital Input 4" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-E13-16 ↔ M190-C-25 | OEM-E13-16 "VVT position sensor LH (VVL+)" [trigger_in] is wired to M190-C-25 "Universal Digital Input 3" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-E14-10 ↔ M190-C-32 | OEM-E14-10 "Camshaft position sensor (G2)" [trigger_in] is wired to M190-C-32 "Universal Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-E14-23 ↔ M190-C-18 | OEM-E14-23 "Crank position sensor (NE+)" [trigger_in] is wired to M190-C-18 "Universal Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E11-19 ↔ M190-B-b | OEM-E11-19 "VVT oil-control valve RH (OCR+)" [low_side_out] is wired to M190-B-b "Low Side Injector 3" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E11-28 ↔ M190-A-10 | OEM-E11-28 "VVT oil-control valve RH (OCR−)" [low_side_out] is wired to M190-A-10 "Low Side Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E11-7 ↔ M190-B-a | OEM-E11-7 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to M190-B-a "Low Side Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E11-8 ↔ M190-A-40 | OEM-E11-8 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to M190-A-40 "Low Side Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E12-12 ↔ M190-A-47 | OEM-E12-12 "Throttle magnetic clutch + (CL+)" [low_side_out] is wired to M190-A-47 "Low Side Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E13-23 ↔ M190-C-30 | OEM-E13-23 "VVT position sensor RH (VVR−)" [trigger_in] is wired to M190-C-30 "Sensor 0V B2" [sensor_ground]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-E13-3 ↔ M190-B-T | OEM-E13-3 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to M190-B-T "Low Side Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E13-4 ↔ M190-A-25 | OEM-E13-4 "O2 sensor heater (bank unconfirmed)" [low_side_out] is wired to M190-A-25 "Low Side Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E13-8 ↔ M190-A-32 | OEM-E13-8 "Throttle magnetic clutch − (CL−)" [low_side_out] is wired to M190-A-32 "Low Side Injector 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E14-19 ↔ M190-A-17 | OEM-E14-19 "VVT oil-control valve LH (OCV−)" [low_side_out] is wired to M190-A-17 "Low Side Injector 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E14-20 ↔ M190-A-5 | OEM-E14-20 "VVT oil-control valve LH (OCV+)" [low_side_out] is wired to M190-A-5 "Low Side Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E14-29 ↔ M190-A-4 | OEM-E14-29 "ACIS induction VSV" [low_side_out] is wired to M190-A-4 "Low Side Injector 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E15-10 ↔ M190-B-S | OEM-E15-10 "EFI main relay control (MREL)" [low_side_out] is wired to M190-B-S "Low Side Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E15-5 ↔ M190-A-48 | OEM-E15-5 "Fuel pump relay control (FC)" [low_side_out] is wired to M190-A-48 "Low Side Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E15-6 ↔ M190-A-33 | OEM-E15-6 "Check engine light (W)" [low_side_out] is wired to M190-A-33 "Peak Hold Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 2 optional OEM pins are not mapped: OEM-E11-5 Diagnostic test (TC); OEM-E15-11 OBD-II / DLC3 data (SIL) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-E15 9: Ignition switch (+12V): key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); MoTeC M190 has no dedicated key-on input Not wired: - OEM-E15 11: OBD-II / DLC3 data (SIL): no free k_line on MoTeC M190 - OEM-E11 5: Diagnostic test (TC): no free k_line on MoTeC M190
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MoTeC: M1 ECU Hardware manual (7 Nov 2013) — M130/M150/M170/M190 pinout tables | https://web.archive.org/web/2023id_/https://www.motec.com.au/hessian/uploads/M1_ECU_Hardware_c2517380e4.pdf | — | 2026-10-05 | 03dc5975f739 |
| 4 | vendor_doc | Toyota 1UZ-FE (VVT-i) engine manual M1UZ | http://www.epicmarine.com/docs/M1UZrm.pdf | — | — | — |
| 3 | community_copy | 1998 Lexus LS400 ECM terminal voltage chart (RM717U translation) | https://www.renrendoc.com/p-59096353.html | — | — | — |