MX-5 Miata NA8 1996-97 (BP-ZE, 1.8, OBD-II) → Haltech Elite 1500 HT-150900 (auto)
MX-5 Miata NA8 1996-97 (BP-ZE, 1.8, OBD-II) — Haltech — Elite 1500
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 49 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-4-B | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | ELITE1500-A-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | ELITE1500-B-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-4-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-4-C | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-4-D | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-4-K | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | ELITE1500-A-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | ELITE1500-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-3-O | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-4-H | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-0V-1 | ELITE1500-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | ELITE1500-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-0V-1 | ELITE1500-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-3-I | ELITE1500-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-4-E | ELITE1500-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | ELITE1500-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-4-G | ELITE1500-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | ELITE1500-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-4-F | ELITE1500-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-4-N | ELITE1500-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-4-R | ELITE1500-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-4-U | ELITE1500-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-4-V | ELITE1500-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-4-W | ELITE1500-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-4-X | ELITE1500-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-3-B | ELITE1500-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-3-F | ELITE1500-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-3-G | ELITE1500-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-1-A | ELITE1500-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-1-B | ELITE1500-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-1-G | ELITE1500-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-1-U | ELITE1500-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-3-M | ELITE1500-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-1-E | ELITE1500-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-4-J | ELITE1500-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-4-O | ELITE1500-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-4-P | ELITE1500-A-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-4-Q | ELITE1500-A-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-3-H | ELITE1500-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-3-N | ELITE1500-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-3-C | ELITE1500-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-3-D | ELITE1500-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-3-K | ELITE1500-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-3-J | ELITE1500-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-1-M | ELITE1500-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-1-C | ELITE1500-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-1-K | ELITE1500-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-1-L | ELITE1500-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | ELITE1500-A-9 | ELITE1500-A-10 | open (OL) | 5 V sensor reference must not touch power ground | |
| 2 | ELITE1500-A-9 | ELITE1500-B-14 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 3 | ELITE1500-A-10 | ELITE1500-A-26 | open (OL) | power ground must not touch +12 V supply | |
| 4 | ELITE1500-A-9 | ELITE1500-A-26 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 5 | ELITE1500-B-14 | ELITE1500-A-26 | open (OL) | sensor ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
ELITE1500-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | DPO 2 | — | W32 | — | 0.5 | OEM-1-G | — | — | — |
| 10 | Battery ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Battery ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +8V DC | — | — | — | — | — | — | — | — |
| 13 | 12V ignition input | — | — | — | — | — | — | — | — |
| 14 | AVI 10 (TPS) | — | W49 | — | 0.5 | OEM-1-L | — | — | — |
| 15 | AVI 9 (MAP) | — | W45 | — | 0.5 | OEM-3-J | — | — | — |
| 16 | AVI 2 | — | W28 | — | 0.5 | OEM-3-F | — | — | — |
| 17 | AVI 3 | — | W40 | — | 0.5 | OEM-3-H | — | — | — |
| 18 | DPO 1 | — | W31 | — | 0.5 | OEM-1-B | — | — | — |
| 19 | INJ 1 | — | W23 | — | 0.5 | OEM-4-U | — | — | — |
| 2 | AVI 4 | — | W41 | — | 0.5 | OEM-3-N | — | — | — |
| 20 | INJ 2 | — | W24 | — | 0.5 | OEM-4-V | — | — | — |
| 21 | INJ 3 | — | W25 | — | 0.5 | OEM-4-W | — | — | — |
| 22 | INJ 4 | — | W26 | — | 0.5 | OEM-4-X | — | — | — |
| 23 | DPO 3 | — | W34 | — | 0.5 | OEM-3-M | — | — | — |
| 24 | DPO 5 (fuel pump trigger) | — | W33 | — | 0.5 | OEM-1-U | — | — | — |
| 25 | DPO 6 (ECR out) | — | W30 | — | 0.5 | OEM-1-A | — | — | — |
| 26 | ECU injector power input | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | IGN 1 | — | W21 | — | 0.5 | OEM-4-N | — | — | — |
| 31 | Stepper 1 P1 / DPO | — | W36 | — | 0.5 | OEM-4-J | — | — | — |
| 32 | Stepper 1 P2 / DPO | — | W37 | — | 0.5 | OEM-4-O | — | — | — |
| 33 | Stepper 1 P3 / DPO | — | W38 | — | 0.5 | OEM-4-P | — | — | — |
| 34 | Stepper 1 P4 / DPO | — | W39 | — | 0.5 | OEM-4-Q | — | — | — |
| 4 | IGN 2 | — | W22 | — | 0.5 | OEM-4-R | — | — | — |
| 5 | IGN 3 | — | — | — | — | — | — | — | — |
| 6 | IGN 4 | — | — | — | — | — | — | — | — |
| 9 | +5V DC | — | W15 | — | 0.5 | OEM-3-I | — | — | — |
ELITE1500-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Crank (Trigger) (+) | — | W16 | — | 0.5 | OEM-4-E | — | — | — |
| 10 | SPI 3 | — | W47 | — | 0.5 | OEM-1-C | — | — | — |
| 11 | +13.8V ECU supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | AVI 6 (O2 Input 1) | — | W42 | — | 0.5 | OEM-3-C | — | — | — |
| 13 | AVI 1 (O2 Input 2) | — | W27 | — | 0.5 | OEM-3-B | — | — | — |
| 14 | Signal ground | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Signal ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Signal ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | DPO 4 | — | W35 | — | 0.5 | OEM-1-E | — | — | — |
| 2 | Cam (Home) (+) | — | W18 | — | 0.5 | OEM-4-G | — | — | — |
| 20 | AVI 5 | — | W43 | — | 0.5 | OEM-3-D | — | — | — |
| 21 | KNOCK 1 | — | — | — | — | — | — | — | — |
| 23 | CAN H | — | — | — | — | — | — | — | — |
| 24 | CAN L | — | — | — | — | — | — | — | — |
| 25 | DBW 1 / DPO | — | — | — | — | — | — | — | — |
| 26 | DBW 2 / DPO | — | — | — | — | — | — | — | — |
| 3 | AVI 7 (Air Temp) | — | W44 | — | 0.5 | OEM-3-K | — | — | — |
| 4 | AVI 8 (Coolant Temp) | — | W29 | — | 0.5 | OEM-3-G | — | — | — |
| 5 | Crank (Trigger) (−) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Cam (Home) (−) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | SPI 4 | — | W48 | — | 0.5 | OEM-1-K | — | — | — |
| 8 | SPI 1 | — | W20 | — | 0.5 | OEM-4-F | — | — | — |
| 9 | SPI 2 | — | W46 | — | 0.5 | OEM-1-M | — | — | — |
OEM-1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Cooling fan relay (low-side) | — | W30 | — | 0.5 | ELITE1500-A-25 | — | — | — |
| B | A/C condenser fan relay | — | W31 | — | 0.5 | ELITE1500-A-18 | — | — | — |
| C | Starter input (12V while cranking) | — | W47 | — | 0.5 | ELITE1500-B-10 | — | — | — |
| E | Check engine light (MIL) | — | W35 | — | 0.5 | ELITE1500-B-19 | — | — | — |
| G | A/C clutch relay | — | W32 | — | 0.5 | ELITE1500-A-1 | — | — | — |
| K | A/C pressure switch (A/C request) | — | W48 | — | 0.5 | ELITE1500-B-7 | — | — | — |
| L | Clutch switch | — | W49 | — | 0.5 | ELITE1500-A-14 | — | — | — |
| M | Vehicle speed sensor (VSS) | — | W46 | — | 0.5 | ELITE1500-B-9 | — | — | — |
| Q | Brake switch | — | — | — | — | — | — | — | — |
| U | Fuel pump relay (low-side) | — | W33 | — | 0.5 | ELITE1500-A-24 | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B | MAF sensor input | — | W27 | — | 0.5 | ELITE1500-B-13 | — | — | — |
| C | Front O2 sensor input | — | W42 | — | 0.5 | ELITE1500-B-12 | — | — | — |
| D | Rear O2 sensor input | — | W43 | — | 0.5 | ELITE1500-B-20 | — | — | — |
| F | Throttle position (TPS) | — | W28 | — | 0.5 | ELITE1500-A-16 | — | — | — |
| G | Engine coolant temp (CLT) | — | W29 | — | 0.5 | ELITE1500-B-4 | — | — | — |
| H | EGR boost sensor | — | W40 | — | 0.5 | ELITE1500-A-17 | — | — | — |
| I | +5V sensor reference | — | W15 | — | 0.5 | ELITE1500-A-9 | — | — | — |
| J | EGR valve position sensor | — | W45 | — | 0.5 | ELITE1500-A-15 | — | — | — |
| K | Intake air temp (IAT) | — | W44 | — | 0.5 | ELITE1500-B-3 | — | — | — |
| L | Idle switch (closed throttle) | — | — | — | — | — | — | — | — |
| M | Front O2 heater control | — | W34 | — | 0.5 | ELITE1500-A-23 | — | — | — |
| N | EGR boost sensor (2nd channel) | — | W41 | — | 0.5 | ELITE1500-A-2 | — | — | — |
| O | Sensor ground | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| P | Power steering pressure switch | — | — | — | — | — | — | — | — |
OEM-4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Chassis ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| B | ECU power +12V (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| C | Chassis ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| D | Chassis ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| E | Crank position (CKP) sensor | — | W16 | — | 0.5 | ELITE1500-B-1 | — | — | — |
| F | CAS SGT (cam trigger) | — | W20 | — | 0.5 | ELITE1500-B-8 | — | — | — |
| G | CAS SGC (cam sync) | — | W18 | — | 0.5 | ELITE1500-B-2 | — | — | — |
| H | Crank pickup timing ground (CKP gnd) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| I | Permanent +12V (battery) | — | — | — | — | — | — | — | — |
| J | PRC solenoid (FPR control) | — | W36 | — | 0.5 | ELITE1500-A-31 | — | — | — |
| K | Chassis ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| L | Tachometer output | — | — | — | — | — | — | — | — |
| N | Ignition coil trigger (cyl 1&4) | — | W21 | — | 0.5 | ELITE1500-A-3 | — | — | — |
| O | EGR vent solenoid | — | W37 | — | 0.5 | ELITE1500-A-32 | — | — | — |
| P | EGR vacuum solenoid | — | W38 | — | 0.5 | ELITE1500-A-33 | — | — | — |
| Q | Idle air control (IAC) valve | — | W39 | — | 0.5 | ELITE1500-A-34 | — | — | — |
| R | Ignition coil trigger (cyl 2&3) | — | W22 | — | 0.5 | ELITE1500-A-4 | — | — | — |
| T | EVAP purge solenoid | — | — | — | — | — | — | — | — |
| U | Injector 1 (cyl 1) | — | W23 | — | 0.5 | ELITE1500-A-19 | — | — | — |
| V | Injector 2 (cyl 2) | — | W24 | — | 0.5 | ELITE1500-A-20 | — | — | — |
| W | Injector 3 (cyl 3) | — | W25 | — | 0.5 | ELITE1500-A-21 | — | — | — |
| X | Injector 4 (cyl 4) | — | W26 | — | 0.5 | ELITE1500-A-22 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-3-O | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-4-H | — | — | — |
| 1 | — | — | W12 | — | 0.5 | ELITE1500-B-14 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | ELITE1500-B-15 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | ELITE1500-B-16 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | ELITE1500-B-5 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | ELITE1500-B-6 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-4-B | — | — | — |
| 1 | — | — | W2 | — | 0.85 | ELITE1500-A-26 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | ELITE1500-B-11 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-4-A | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-4-C | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-4-D | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-4-K | — | — | — |
| 1 | — | — | W8 | — | 0.85 | ELITE1500-A-10 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | ELITE1500-A-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-1-A | Cooling fan relay (low-side) | low_side_out | ELITE1500-A-25 | DPO 6 (ECR out) | low_side_out | corroborated | |
| OEM-1-B | A/C condenser fan relay | low_side_out | ELITE1500-A-18 | DPO 1 | low_side_out | corroborated | |
| OEM-1-C | Starter input (12V while cranking) | digital_in | ELITE1500-B-10 | SPI 3 | digital_in | corroborated | |
| OEM-1-E | Check engine light (MIL) | low_side_out | ELITE1500-B-19 | DPO 4 | low_side_out | corroborated | |
| OEM-1-G | A/C clutch relay | low_side_out | ELITE1500-A-1 | DPO 2 | low_side_out | corroborated | |
| OEM-1-K | A/C pressure switch (A/C request) | digital_in | ELITE1500-B-7 | SPI 4 | digital_in | corroborated | |
| OEM-1-L | Clutch switch | digital_in | ELITE1500-A-14 | AVI 10 (TPS) | analog_in | corroborated | |
| OEM-1-M | Vehicle speed sensor (VSS) | digital_in | ELITE1500-B-9 | SPI 2 | digital_in | corroborated | |
| OEM-1-Q | Brake switch | digital_in | — | — | — | corroborated | |
| OEM-1-U | Fuel pump relay (low-side) | low_side_out | ELITE1500-A-24 | DPO 5 (fuel pump trigger) | low_side_out | corroborated | |
| OEM-3-B | MAF sensor input | analog_in | ELITE1500-B-13 | AVI 1 (O2 Input 2) | analog_in | corroborated | |
| OEM-3-C | Front O2 sensor input | lambda_nb_in | ELITE1500-B-12 | AVI 6 (O2 Input 1) | analog_in | corroborated | |
| OEM-3-D | Rear O2 sensor input | lambda_nb_in | ELITE1500-B-20 | AVI 5 | analog_in | corroborated | |
| OEM-3-F | Throttle position (TPS) | analog_in | ELITE1500-A-16 | AVI 2 | analog_in | corroborated | |
| OEM-3-G | Engine coolant temp (CLT) | temp_in | ELITE1500-B-4 | AVI 8 (Coolant Temp) | analog_in | corroborated | |
| OEM-3-H | EGR boost sensor | analog_in | ELITE1500-A-17 | AVI 3 | analog_in | corroborated | |
| OEM-3-I | +5V sensor reference | vref | ELITE1500-A-9 | +5V DC | vref | corroborated | |
| OEM-3-J | EGR valve position sensor | analog_in | ELITE1500-A-15 | AVI 9 (MAP) | analog_in | corroborated | |
| OEM-3-K | Intake air temp (IAT) | temp_in | ELITE1500-B-3 | AVI 7 (Air Temp) | analog_in | corroborated | |
| OEM-3-L | Idle switch (closed throttle) | digital_in | — | — | — | corroborated | |
| OEM-3-M | Front O2 heater control | low_side_out | ELITE1500-A-23 | DPO 3 | low_side_out | corroborated | |
| OEM-3-N | EGR boost sensor (2nd channel) | analog_in | ELITE1500-A-2 | AVI 4 | analog_in | corroborated | |
| OEM-3-O | Sensor ground | sensor_ground | ELITE1500-B-14 + ELITE1500-B-15 + ELITE1500-B-16 + ELITE1500-B-5 + ELITE1500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-3-P | Power steering pressure switch | digital_in | — | — | — | corroborated | |
| OEM-4-A | Chassis ground | ground | ELITE1500-A-10 + ELITE1500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-4-B | ECU power +12V (main relay) | power_in | ELITE1500-A-26 + ELITE1500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | corroborated | |
| OEM-4-C | Chassis ground | ground | ELITE1500-A-10 + ELITE1500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-4-D | Chassis ground | ground | ELITE1500-A-10 + ELITE1500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-4-E | Crank position (CKP) sensor | trigger_in | ELITE1500-B-1 | Crank (Trigger) (+) | trigger_in | corroborated | |
| OEM-4-F | CAS SGT (cam trigger) | trigger_in | ELITE1500-B-8 | SPI 1 | digital_in | corroborated | |
| OEM-4-G | CAS SGC (cam sync) | trigger_in | ELITE1500-B-2 | Cam (Home) (+) | trigger_in | corroborated | |
| OEM-4-H | Crank pickup timing ground (CKP gnd) | sensor_ground | ELITE1500-B-14 + ELITE1500-B-15 + ELITE1500-B-16 + ELITE1500-B-5 + ELITE1500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-4-I | Permanent +12V (battery) | power_in | — | — | — | corroborated | |
| OEM-4-J | PRC solenoid (FPR control) | low_side_out | ELITE1500-A-31 | Stepper 1 P1 / DPO | switch_out | corroborated | |
| OEM-4-K | Chassis ground | ground | ELITE1500-A-10 + ELITE1500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-4-L | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-4-N | Ignition coil trigger (cyl 1&4) | ignition_out | ELITE1500-A-3 | IGN 1 | ignition_out | corroborated | |
| OEM-4-O | EGR vent solenoid | low_side_out | ELITE1500-A-32 | Stepper 1 P2 / DPO | switch_out | corroborated | |
| OEM-4-P | EGR vacuum solenoid | low_side_out | ELITE1500-A-33 | Stepper 1 P3 / DPO | switch_out | corroborated | |
| OEM-4-Q | Idle air control (IAC) valve | low_side_out | ELITE1500-A-34 | Stepper 1 P4 / DPO | switch_out | corroborated | |
| OEM-4-R | Ignition coil trigger (cyl 2&3) | ignition_out | ELITE1500-A-4 | IGN 2 | ignition_out | corroborated | |
| OEM-4-T | EVAP purge solenoid | low_side_out | — | — | — | corroborated | |
| OEM-4-U | Injector 1 (cyl 1) | injector_out | ELITE1500-A-19 | INJ 1 | injector_out | corroborated | |
| OEM-4-V | Injector 2 (cyl 2) | injector_out | ELITE1500-A-20 | INJ 2 | injector_out | corroborated | |
| OEM-4-W | Injector 3 (cyl 3) | injector_out | ELITE1500-A-21 | INJ 3 | injector_out | corroborated | |
| OEM-4-X | Injector 4 (cyl 4) | injector_out | ELITE1500-A-22 | INJ 4 | injector_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-4-B | SP-14V-1 | 0.85 | no route | ECU power +12V (main relay) | — | |
| W2 | SP-14V-1 | ELITE1500-A-26 | 0.85 | no route | ECU injector power input | — | |
| W3 | SP-14V-1 | ELITE1500-B-11 | 0.85 | no route | +13.8V ECU supply | — | |
| W4 | OEM-4-A | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W5 | OEM-4-C | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W6 | OEM-4-D | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W7 | OEM-4-K | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W8 | SP-GND-1 | ELITE1500-A-10 | 0.85 | no route | Battery ground | — | |
| W9 | SP-GND-1 | ELITE1500-A-11 | 0.85 | no route | Battery ground | — | |
| W10 | OEM-3-O | SP-0V-1 | 0.5 | no route | Sensor ground | — | |
| W11 | OEM-4-H | SP-0V-1 | 0.5 | no route | Crank pickup timing ground (CKP gnd) | — | |
| W12 | SP-0V-1 | ELITE1500-B-14 | 0.5 | no route | Signal ground | — | |
| W13 | SP-0V-1 | ELITE1500-B-15 | 0.5 | no route | Signal ground | — | |
| W14 | SP-0V-1 | ELITE1500-B-16 | 0.5 | no route | Signal ground | — | |
| W15 | OEM-3-I | ELITE1500-A-9 | 0.5 | no route | +5V sensor reference | — | |
| W16 | OEM-4-E | ELITE1500-B-1 | 0.5 | no route | Crank position (CKP) sensor | — | |
| W17 | SP-0V-1 | ELITE1500-B-5 | 0.5 | no route | Crank (Trigger) (−) | — | |
| W18 | OEM-4-G | ELITE1500-B-2 | 0.5 | no route | CAS SGC (cam sync) | — | |
| W19 | SP-0V-1 | ELITE1500-B-6 | 0.5 | no route | Cam (Home) (−) | — | |
| W20 | OEM-4-F | ELITE1500-B-8 | 0.5 | no route | CAS SGT (cam trigger) | — | |
| W21 | OEM-4-N | ELITE1500-A-3 | 0.5 | no route | Ignition coil trigger (cyl 1&4) | — | |
| W22 | OEM-4-R | ELITE1500-A-4 | 0.5 | no route | Ignition coil trigger (cyl 2&3) | — | |
| W23 | OEM-4-U | ELITE1500-A-19 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W24 | OEM-4-V | ELITE1500-A-20 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W25 | OEM-4-W | ELITE1500-A-21 | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W26 | OEM-4-X | ELITE1500-A-22 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W27 | OEM-3-B | ELITE1500-B-13 | 0.5 | no route | MAF sensor input | — | |
| W28 | OEM-3-F | ELITE1500-A-16 | 0.5 | no route | Throttle position (TPS) | — | |
| W29 | OEM-3-G | ELITE1500-B-4 | 0.5 | no route | Engine coolant temp (CLT) | — | |
| W30 | OEM-1-A | ELITE1500-A-25 | 0.5 | no route | Cooling fan relay (low-side) | — | |
| W31 | OEM-1-B | ELITE1500-A-18 | 0.5 | no route | A/C condenser fan relay | — | |
| W32 | OEM-1-G | ELITE1500-A-1 | 0.5 | no route | A/C clutch relay | — | |
| W33 | OEM-1-U | ELITE1500-A-24 | 0.5 | no route | Fuel pump relay (low-side) | — | |
| W34 | OEM-3-M | ELITE1500-A-23 | 0.5 | no route | Front O2 heater control | — | |
| W35 | OEM-1-E | ELITE1500-B-19 | 0.5 | no route | Check engine light (MIL) | — | |
| W36 | OEM-4-J | ELITE1500-A-31 | 0.5 | no route | PRC solenoid (FPR control) | — | |
| W37 | OEM-4-O | ELITE1500-A-32 | 0.5 | no route | EGR vent solenoid | — | |
| W38 | OEM-4-P | ELITE1500-A-33 | 0.5 | no route | EGR vacuum solenoid | — | |
| W39 | OEM-4-Q | ELITE1500-A-34 | 0.5 | no route | Idle air control (IAC) valve | — | |
| W40 | OEM-3-H | ELITE1500-A-17 | 0.5 | no route | EGR boost sensor | — | |
| W41 | OEM-3-N | ELITE1500-A-2 | 0.5 | no route | EGR boost sensor (2nd channel) | — | |
| W42 | OEM-3-C | ELITE1500-B-12 | 0.5 | no route | Front O2 sensor input | — | |
| W43 | OEM-3-D | ELITE1500-B-20 | 0.5 | no route | Rear O2 sensor input | — | |
| W44 | OEM-3-K | ELITE1500-B-3 | 0.5 | no route | Intake air temp (IAT) | — | |
| W45 | OEM-3-J | ELITE1500-A-15 | 0.5 | no route | EGR valve position sensor | — | |
| W46 | OEM-1-M | ELITE1500-B-9 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W47 | OEM-1-C | ELITE1500-B-10 | 0.5 | no route | Starter input (12V while cranking) | — | |
| W48 | OEM-1-K | ELITE1500-B-7 | 0.5 | no route | A/C pressure switch (A/C request) | — | |
| W49 | OEM-1-L | ELITE1500-A-14 | 0.5 | no route | Clutch switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (10)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-1-L ↔ ELITE1500-A-14 | OEM-1-L "Clutch switch" [digital_in] is wired to ELITE1500-A-14 "AVI 10 (TPS)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-4-F ↔ ELITE1500-B-8 | OEM-4-F "CAS SGT (cam trigger)" [trigger_in] is wired to ELITE1500-B-8 "SPI 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-3-G ↔ ELITE1500-B-4 | OEM-3-G "Engine coolant temp (CLT)" [temp_in] is wired to ELITE1500-B-4 "AVI 8 (Coolant Temp)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-3-K ↔ ELITE1500-B-3 | OEM-3-K "Intake air temp (IAT)" [temp_in] is wired to ELITE1500-B-3 "AVI 7 (Air Temp)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-3-O ↔ ELITE1500-B-6 | OEM-3-O "Sensor ground" [sensor_ground] is wired to ELITE1500-B-6 "Cam (Home) (−)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-4-J ↔ ELITE1500-A-31 | OEM-4-J "PRC solenoid (FPR control)" [low_side_out] is wired to ELITE1500-A-31 "Stepper 1 P1 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-4-O ↔ ELITE1500-A-32 | OEM-4-O "EGR vent solenoid" [low_side_out] is wired to ELITE1500-A-32 "Stepper 1 P2 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-4-P ↔ ELITE1500-A-33 | OEM-4-P "EGR vacuum solenoid" [low_side_out] is wired to ELITE1500-A-33 "Stepper 1 P3 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-4-Q ↔ ELITE1500-A-34 | OEM-4-Q "Idle air control (IAC) valve" [low_side_out] is wired to ELITE1500-A-34 "Stepper 1 P4 / DPO" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 5 optional OEM pins are not mapped: OEM-1-Q Brake switch; OEM-3-L Idle switch (closed throttle); OEM-3-P Power steering pressure switch; OEM-4-L Tachometer output; OEM-4-T EVAP purge solenoid |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-4-I | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-4 I: Permanent +12V (battery): Haltech Elite 1500 has no battery-constant input; not needed - OEM-4 T: EVAP purge solenoid: no free low_side/relay_control/heater_low_side/ls_hs/injector on Haltech Elite 1500 - OEM-4 L: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on Haltech Elite 1500 - OEM-1 Q: Brake switch: no free switch_in/frequency_in/analog_0_5 on Haltech Elite 1500 - OEM-3 L: Idle switch (closed throttle): no free switch_in/frequency_in/analog_0_5 on Haltech Elite 1500 - OEM-3 P: Power steering pressure switch: no free switch_in/frequency_in/analog_0_5 on Haltech Elite 1500 - ELITE1500-A 13: 12V ignition input: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AEM EMS 30-1720 Plug-and-Play adapter manual (1996-97 Miata) | https://static.summitracing.com/global/images/instructions/avm-30-1720.pdf | — | — | — |
| 4 | vendor_doc | Haltech Elite 1500 (HT-150900) — Features and Specifications | https://store.haltech.com/wp-admin/admin-ajax.php?action=ht_get_file&id=5d227c20506c252d340ade15&op=1 | — | 2026-10-05 | 6cce328f0dd2 |
| 4 | vendor_doc | Haltech Elite 1500 — 26-pin connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-26-pin-elite1500 | archive | 2026-10-05 | 50cc758580c4 |
| 4 | vendor_doc | Haltech Elite 1500 — 34-pin main connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-34-pin-elite1500 | archive | 2026-10-05 | 5294a445d73b |
| 3 | community_copy | Mellens.net: 1996 Mazda Miata wiring diagrams (FSM-derived) | http://www.mellens.net/mazda/mazda_miata_extra_manual/1996_wiring.pdf | — | — | — |