MX-5 Miata NA8 1996-97 (BP-ZE, 1.8, OBD-II) → rusEFI Proteus (auto)
MX-5 Miata NA8 1996-97 (BP-ZE, 1.8, OBD-II) — rusEFI — Proteus
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 63 wires · 9 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-4-B | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-4-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-4-C | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-4-D | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-4-K | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-3-O | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-4-H | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-3-I | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-4-E | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-4-G | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-4-F | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-4-N | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-4-R | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-4-U | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-4-V | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-4-W | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-4-X | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-3-B | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-3-F | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-3-G | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-1-A | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-1-B | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-1-G | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-1-U | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-3-M | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-1-E | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-4-J | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-4-O | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-4-P | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-4-Q | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-4-T | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-3-H | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-3-N | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-3-C | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-3-D | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-3-K | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-3-J | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-1-M | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-1-C | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-1-K | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-1-L | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-1-Q | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-3-L | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-3-P | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-White35-10 | PROTEUS-Black23-12 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | PROTEUS-White35-10 | PROTEUS-Black23-14 | open (OL) | 5 V sensor reference must not touch power ground | |
| 3 | PROTEUS-Black23-12 | PROTEUS-Black23-23 | open (OL) | sensor ground must not touch +12 V supply | |
| 4 | PROTEUS-Black23-14 | PROTEUS-Black23-23 | open (OL) | power ground must not touch +12 V supply | |
| 5 | PROTEUS-White35-10 | PROTEUS-Black23-23 | open (OL) | 5 V sensor reference must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Cooling fan relay (low-side) | — | W40 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| B | A/C condenser fan relay | — | W41 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| C | Starter input (12V while cranking) | — | W58 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| E | Check engine light (MIL) | — | W45 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
| G | A/C clutch relay | — | W42 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| K | A/C pressure switch (A/C request) | — | W59 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| L | Clutch switch | — | W60 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| M | Vehicle speed sensor (VSS) | — | W57 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| Q | Brake switch | — | W61 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| U | Fuel pump relay (low-side) | — | W43 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B | MAF sensor input | — | W37 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| C | Front O2 sensor input | — | W53 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| D | Rear O2 sensor input | — | W54 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| F | Throttle position (TPS) | — | W38 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| G | Engine coolant temp (CLT) | — | W39 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| H | EGR boost sensor | — | W51 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| I | +5V sensor reference | — | W25 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| J | EGR valve position sensor | — | W56 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| K | Intake air temp (IAT) | — | W55 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| L | Idle switch (closed throttle) | — | W62 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
| M | Front O2 heater control | — | W44 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| N | EGR boost sensor (2nd channel) | — | W52 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| O | Sensor ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| P | Power steering pressure switch | — | W63 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
OEM-4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Chassis ground | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| B | ECU power +12V (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| C | Chassis ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| D | Chassis ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| E | Crank position (CKP) sensor | — | W26 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| F | CAS SGT (cam trigger) | — | W29 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| G | CAS SGC (cam sync) | — | W28 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| H | Crank pickup timing ground (CKP gnd) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| I | Permanent +12V (battery) | — | — | — | — | — | — | — | — |
| J | PRC solenoid (FPR control) | — | W46 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| K | Chassis ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| L | Tachometer output | — | — | — | — | — | — | — | — |
| N | Ignition coil trigger (cyl 1&4) | — | W31 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| O | EGR vent solenoid | — | W47 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| P | EGR vacuum solenoid | — | W48 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| Q | Idle air control (IAC) valve | — | W49 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| R | Ignition coil trigger (cyl 2&3) | — | W32 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| T | EVAP purge solenoid | — | W50 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| U | Injector 1 (cyl 1) | — | W33 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| V | Injector 2 (cyl 2) | — | W34 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| W | Injector 3 (cyl 3) | — | W35 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| X | Injector 4 (cyl 4) | — | W36 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W28 | — | 0.5 | OEM-4-G | — | — | — |
| 10 | Digital 1 | — | W58 | — | 0.5 | OEM-1-C | — | — | — |
| 11 | Digital 6 | — | W61 | — | 0.5 | OEM-1-Q | — | — | — |
| 12 | VR 2 negative | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | — | — | — | — | — | — | — |
| 19 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W57 | — | 0.5 | OEM-1-M | — | — | — |
| 20 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W59 | — | 0.5 | OEM-1-K | — | — | — |
| 4 | VR 2 positive | — | W29 | — | 0.5 | OEM-4-F | — | — | — |
| 5 | VR 1 positive | — | W26 | — | 0.5 | OEM-4-E | — | — | — |
| 6 | ETB 1 negative | — | — | — | — | — | — | — | — |
| 7 | ETB 1 positive | — | — | — | — | — | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W60 | — | 0.5 | OEM-1-L | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W43 | — | 0.5 | OEM-1-U | — | — | — |
| 11 | Lowside 14 | — | W44 | — | 0.5 | OEM-3-M | — | — | — |
| 12 | Lowside 15 | — | W45 | — | 0.5 | OEM-1-E | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W34 | — | 0.5 | OEM-4-V | — | — | — |
| 16 | Injector 4 | — | W36 | — | 0.5 | OEM-4-X | — | — | — |
| 17 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W50 | — | 0.5 | OEM-4-T | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W40 | — | 0.5 | OEM-1-A | — | — | — |
| 21 | Lowside 12 | — | W42 | — | 0.5 | OEM-1-G | — | — | — |
| 22 | Ignition 3 | — | — | — | — | — | — | — | — |
| 23 | Lowside 16 | — | W46 | — | 0.5 | OEM-4-J | — | — | — |
| 24 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W33 | — | 0.5 | OEM-4-U | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | — | — | — | — | — | — | — |
| 32 | Ignition 5 | — | — | — | — | — | — | — | — |
| 33 | Ignition 4 | — | — | — | — | — | — | — | — |
| 34 | Ignition 2 | — | W32 | — | 0.5 | OEM-4-R | — | — | — |
| 35 | Ignition 1 | — | W31 | — | 0.5 | OEM-4-N | — | — | — |
| 4 | Injector 3 | — | W35 | — | 0.5 | OEM-4-W | — | — | — |
| 5 | Injector 5 | — | W47 | — | 0.5 | OEM-4-O | — | — | — |
| 6 | Injector 6 | — | W48 | — | 0.5 | OEM-4-P | — | — | — |
| 7 | Injector 7 | — | W49 | — | 0.5 | OEM-4-Q | — | — | — |
| 8 | Injector 9 | — | — | — | — | — | — | — | — |
| 9 | Lowside 11 | — | W41 | — | 0.5 | OEM-1-B | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W25 | — | 0.5 | OEM-3-I | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W37 | — | 0.5 | OEM-3-B | — | — | — |
| 14 | Analog Volt 3 | — | W51 | — | 0.5 | OEM-3-H | — | — | — |
| 15 | Analog Volt 5 | — | W53 | — | 0.5 | OEM-3-C | — | — | — |
| 16 | Analog Volt 7 | — | W56 | — | 0.5 | OEM-3-J | — | — | — |
| 17 | Analog Volt 9 | — | W63 | — | 0.5 | OEM-3-P | — | — | — |
| 18 | Analog Volt 11 | — | — | — | — | — | — | — | — |
| 19 | Thermistor 1 | — | — | — | — | — | — | — | — |
| 2 | Sensor ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W39 | — | 0.5 | OEM-3-G | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W38 | — | 0.5 | OEM-3-F | — | — | — |
| 25 | Analog Volt 4 | — | W52 | — | 0.5 | OEM-3-N | — | — | — |
| 26 | Analog Volt 6 | — | W54 | — | 0.5 | OEM-3-D | — | — | — |
| 27 | Analog Volt 8 | — | W62 | — | 0.5 | OEM-3-L | — | — | — |
| 28 | Analog Volt 10 | — | — | — | — | — | — | — | — |
| 29 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W55 | — | 0.5 | OEM-3-K | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | — | — | — | — | — | — | — |
| 35 | Knock 2 | — | — | — | — | — | — | — | — |
| 4 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-3-O | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-4-H | — | — | — |
| 1 | — | — | W15 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-4-B | — | — | — |
| 1 | — | — | W2 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W3 | — | 0.85 | OEM-4-A | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-4-C | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-4-D | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-4-K | — | — | — |
| 1 | — | — | W7 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-1-A | Cooling fan relay (low-side) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | corroborated | |
| OEM-1-B | A/C condenser fan relay | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | corroborated | |
| OEM-1-C | Starter input (12V while cranking) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | corroborated | |
| OEM-1-E | Check engine light (MIL) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | corroborated | |
| OEM-1-G | A/C clutch relay | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | corroborated | |
| OEM-1-K | A/C pressure switch (A/C request) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | corroborated | |
| OEM-1-L | Clutch switch | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | corroborated | |
| OEM-1-M | Vehicle speed sensor (VSS) | digital_in | PROTEUS-Black23-2 | Digital 3 | digital_in | corroborated | |
| OEM-1-Q | Brake switch | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | corroborated | |
| OEM-1-U | Fuel pump relay (low-side) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | corroborated | |
| OEM-3-B | MAF sensor input | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | corroborated | |
| OEM-3-C | Front O2 sensor input | lambda_nb_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | corroborated | |
| OEM-3-D | Rear O2 sensor input | lambda_nb_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | corroborated | |
| OEM-3-F | Throttle position (TPS) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | corroborated | |
| OEM-3-G | Engine coolant temp (CLT) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | corroborated | |
| OEM-3-H | EGR boost sensor | analog_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | corroborated | |
| OEM-3-I | +5V sensor reference | vref | PROTEUS-White35-10 | 5V supply #2 | vref | corroborated | |
| OEM-3-J | EGR valve position sensor | analog_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | corroborated | |
| OEM-3-K | Intake air temp (IAT) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | corroborated | |
| OEM-3-L | Idle switch (closed throttle) | digital_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | corroborated | |
| OEM-3-M | Front O2 heater control | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | corroborated | |
| OEM-3-N | EGR boost sensor (2nd channel) | analog_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | corroborated | |
| OEM-3-O | Sensor ground | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-3-P | Power steering pressure switch | digital_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | corroborated | |
| OEM-4-A | Chassis ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-4-B | ECU power +12V (main relay) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | corroborated | |
| OEM-4-C | Chassis ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-4-D | Chassis ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-4-E | Crank position (CKP) sensor | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | corroborated | |
| OEM-4-F | CAS SGT (cam trigger) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | corroborated | |
| OEM-4-G | CAS SGC (cam sync) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | corroborated | |
| OEM-4-H | Crank pickup timing ground (CKP gnd) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-4-I | Permanent +12V (battery) | power_in | — | — | — | corroborated | |
| OEM-4-J | PRC solenoid (FPR control) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | corroborated | |
| OEM-4-K | Chassis ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-4-L | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-4-N | Ignition coil trigger (cyl 1&4) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | corroborated | |
| OEM-4-O | EGR vent solenoid | low_side_out | PROTEUS-Black35-5 | Injector 5 | injector_out | corroborated | |
| OEM-4-P | EGR vacuum solenoid | low_side_out | PROTEUS-Black35-6 | Injector 6 | injector_out | corroborated | |
| OEM-4-Q | Idle air control (IAC) valve | low_side_out | PROTEUS-Black35-7 | Injector 7 | injector_out | corroborated | |
| OEM-4-R | Ignition coil trigger (cyl 2&3) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | corroborated | |
| OEM-4-T | EVAP purge solenoid | low_side_out | PROTEUS-Black35-19 | Injector 8 | injector_out | corroborated | |
| OEM-4-U | Injector 1 (cyl 1) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | corroborated | |
| OEM-4-V | Injector 2 (cyl 2) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | corroborated | |
| OEM-4-W | Injector 3 (cyl 3) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | corroborated | |
| OEM-4-X | Injector 4 (cyl 4) | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-4-B | SP-14V-1 | 0.85 | no route | ECU power +12V (main relay) | — | |
| W2 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W3 | OEM-4-A | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W4 | OEM-4-C | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W5 | OEM-4-D | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W6 | OEM-4-K | SP-GND-1 | 0.85 | no route | Chassis ground | — | |
| W7 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W13 | OEM-3-O | SP-0V-1 | 0.5 | no route | Sensor ground | — | |
| W14 | OEM-4-H | SP-0V-1 | 0.5 | no route | Crank pickup timing ground (CKP gnd) | — | |
| W15 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W16 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W17 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W18 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W25 | OEM-3-I | PROTEUS-White35-10 | 0.5 | no route | +5V sensor reference | — | |
| W26 | OEM-4-E | PROTEUS-Black23-5 | 0.5 | no route | Crank position (CKP) sensor | — | |
| W27 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W28 | OEM-4-G | PROTEUS-Black23-1 | 0.5 | no route | CAS SGC (cam sync) | — | |
| W29 | OEM-4-F | PROTEUS-Black23-4 | 0.5 | no route | CAS SGT (cam trigger) | — | |
| W30 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W31 | OEM-4-N | PROTEUS-Black35-35 | 0.5 | no route | Ignition coil trigger (cyl 1&4) | — | |
| W32 | OEM-4-R | PROTEUS-Black35-34 | 0.5 | no route | Ignition coil trigger (cyl 2&3) | — | |
| W33 | OEM-4-U | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 (cyl 1) | — | |
| W34 | OEM-4-V | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 (cyl 2) | — | |
| W35 | OEM-4-W | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 (cyl 3) | — | |
| W36 | OEM-4-X | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 (cyl 4) | — | |
| W37 | OEM-3-B | PROTEUS-White35-13 | 0.5 | no route | MAF sensor input | — | |
| W38 | OEM-3-F | PROTEUS-White35-24 | 0.5 | no route | Throttle position (TPS) | — | |
| W39 | OEM-3-G | PROTEUS-White35-20 | 0.5 | no route | Engine coolant temp (CLT) | — | |
| W40 | OEM-1-A | PROTEUS-Black35-20 | 0.5 | no route | Cooling fan relay (low-side) | — | |
| W41 | OEM-1-B | PROTEUS-Black35-9 | 0.5 | no route | A/C condenser fan relay | — | |
| W42 | OEM-1-G | PROTEUS-Black35-21 | 0.5 | no route | A/C clutch relay | — | |
| W43 | OEM-1-U | PROTEUS-Black35-10 | 0.5 | no route | Fuel pump relay (low-side) | — | |
| W44 | OEM-3-M | PROTEUS-Black35-11 | 0.5 | no route | Front O2 heater control | — | |
| W45 | OEM-1-E | PROTEUS-Black35-12 | 0.5 | no route | Check engine light (MIL) | — | |
| W46 | OEM-4-J | PROTEUS-Black35-23 | 0.5 | no route | PRC solenoid (FPR control) | — | |
| W47 | OEM-4-O | PROTEUS-Black35-5 | 0.5 | no route | EGR vent solenoid | — | |
| W48 | OEM-4-P | PROTEUS-Black35-6 | 0.5 | no route | EGR vacuum solenoid | — | |
| W49 | OEM-4-Q | PROTEUS-Black35-7 | 0.5 | no route | Idle air control (IAC) valve | — | |
| W50 | OEM-4-T | PROTEUS-Black35-19 | 0.5 | no route | EVAP purge solenoid | — | |
| W51 | OEM-3-H | PROTEUS-White35-14 | 0.5 | no route | EGR boost sensor | — | |
| W52 | OEM-3-N | PROTEUS-White35-25 | 0.5 | no route | EGR boost sensor (2nd channel) | — | |
| W53 | OEM-3-C | PROTEUS-White35-15 | 0.5 | no route | Front O2 sensor input | — | |
| W54 | OEM-3-D | PROTEUS-White35-26 | 0.5 | no route | Rear O2 sensor input | — | |
| W55 | OEM-3-K | PROTEUS-White35-30 | 0.5 | no route | Intake air temp (IAT) | — | |
| W56 | OEM-3-J | PROTEUS-White35-16 | 0.5 | no route | EGR valve position sensor | — | |
| W57 | OEM-1-M | PROTEUS-Black23-2 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W58 | OEM-1-C | PROTEUS-Black23-10 | 0.5 | no route | Starter input (12V while cranking) | — | |
| W59 | OEM-1-K | PROTEUS-Black23-3 | 0.5 | no route | A/C pressure switch (A/C request) | — | |
| W60 | OEM-1-L | PROTEUS-Black23-9 | 0.5 | no route | Clutch switch | — | |
| W61 | OEM-1-Q | PROTEUS-Black23-11 | 0.5 | no route | Brake switch | — | |
| W62 | OEM-3-L | PROTEUS-White35-27 | 0.5 | no route | Idle switch (closed throttle) | — | |
| W63 | OEM-3-P | PROTEUS-White35-17 | 0.5 | no route | Power steering pressure switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (8)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-3-L ↔ PROTEUS-White35-27 | OEM-3-L "Idle switch (closed throttle)" [digital_in] is wired to PROTEUS-White35-27 "Analog Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-3-P ↔ PROTEUS-White35-17 | OEM-3-P "Power steering pressure switch" [digital_in] is wired to PROTEUS-White35-17 "Analog Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-4-O ↔ PROTEUS-Black35-5 | OEM-4-O "EGR vent solenoid" [low_side_out] is wired to PROTEUS-Black35-5 "Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-4-P ↔ PROTEUS-Black35-6 | OEM-4-P "EGR vacuum solenoid" [low_side_out] is wired to PROTEUS-Black35-6 "Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-4-Q ↔ PROTEUS-Black35-7 | OEM-4-Q "Idle air control (IAC) valve" [low_side_out] is wired to PROTEUS-Black35-7 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-4-T ↔ PROTEUS-Black35-19 | OEM-4-T "EVAP purge solenoid" [low_side_out] is wired to PROTEUS-Black35-19 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | PROTEUS-White35-29 ↔ PROTEUS-Black23-13 | PROTEUS-White35-29 "Sensor ground" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 1 optional OEM pins are not mapped: OEM-4-L Tachometer output |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-4-I | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-4 I: Permanent +12V (battery): rusEFI Proteus has no battery-constant input; not needed - OEM-4 L: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on rusEFI Proteus - PROTEUS-Black23 18: Ignition switch in: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AEM EMS 30-1720 Plug-and-Play adapter manual (1996-97 Miata) | https://static.summitracing.com/global/images/instructions/avm-30-1720.pdf | — | — | — |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |
| 3 | community_copy | Mellens.net: 1996 Mazda Miata wiring diagrams (FSM-derived) | http://www.mellens.net/mazda/mazda_miata_extra_manual/1996_wiring.pdf | — | — | — |