Scion FR-S (ZN6, FA20) → Link G5 Voodoo Pro V1 (auto)
Scion FR-S (ZN6, FA20) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 12: read the Findings page before cutting any wire |
| Size of the job | 72 wires · 9 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A34-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-A34-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A34-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A36-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A36-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A34-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A35-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A35-22 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-A36-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-A34-16 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-A34-14 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A34-26 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-A34-25 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A34-15 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A34-28 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A34-17 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A36-21 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-A36-10 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A36-31 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A36-8 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A36-12 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A36-14 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A36-22 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A36-25 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A36-24 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A36-32 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A36-13 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-A36-23 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A35-31 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A36-28 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A35-23 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A36-18 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-A36-30 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A33-27 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A35-13 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A35-12 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A35-11 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A33-20 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A35-17 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A35-35 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A35-5 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A35-7 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A34-5 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A36-6 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A36-17 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A36-7 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A36-16 | G5VOODOOPROV-E-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A36-5 | G5VOODOOPROV-E-E1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A34-13 | G5VOODOOPROV-E-E11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A34-32 | G5VOODOOPROV-E-E10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A35-1 | G5VOODOOPROV-E-E9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A35-19 | G5VOODOOPROV-E-E8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A33-22 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A34-20 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A34-21 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A33-12 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A36-20 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A33-8 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A34-11 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A34-31 | G5VOODOOPROV-B-B31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A34-9 | G5VOODOOPROV-B-B32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A35-10 | G5VOODOOPROV-E-E12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A35-20 | G5VOODOOPROV-E-E13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A33-14 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A33-15 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A33-16 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A33-17 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-A33-3 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-A33-7 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-A35-26 | G5VOODOOPROV-B-B27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-A33-4 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W26 | — | 0.5 | OEM-A36-25 | — | — | — |
| A10 | Ignition 4 | — | W22 | — | 0.5 | OEM-A36-8 | — | — | — |
| A11 | Ignition 3 | — | W21 | — | 0.5 | OEM-A36-31 | — | — | — |
| A12 | Ignition 2 | — | W20 | — | 0.5 | OEM-A36-10 | — | — | — |
| A13 | Ignition 1 | — | W19 | — | 0.5 | OEM-A36-21 | — | — | — |
| A14 | Analogue Volt 4 | — | W34 | — | 0.5 | OEM-A36-18 | — | — | — |
| A15 | Analogue Temp 1 | — | W35 | — | 0.5 | OEM-A36-30 | — | — | — |
| A16 | Analogue Temp 2 | — | W58 | — | 0.5 | OEM-A33-12 | — | — | — |
| A17 | Analogue Volt 1 | — | W31 | — | 0.5 | OEM-A35-31 | — | — | — |
| A18 | Aux 4 | — | W40 | — | 0.5 | OEM-A33-20 | — | — | — |
| A19 | Aux 3 | — | W39 | — | 0.5 | OEM-A35-11 | — | — | — |
| A2 | Injection 3 | — | W25 | — | 0.5 | OEM-A36-22 | — | — | — |
| A20 | Aux 2 | — | W38 | — | 0.5 | OEM-A35-12 | — | — | — |
| A21 | Aux 1 | — | W37 | — | 0.5 | OEM-A35-13 | — | — | — |
| A22 | Analogue Volt 2 | — | W32 | — | 0.5 | OEM-A36-28 | — | — | — |
| A23 | Digital Input 3 | — | W16 | — | 0.5 | OEM-A34-15 | — | — | — |
| A26 | Aux 8 | — | W46 | — | 0.5 | OEM-A36-6 | — | — | — |
| A27 | Aux 7 | — | W45 | — | 0.5 | OEM-A34-5 | — | — | — |
| A28 | Aux 6 | — | W44 | — | 0.5 | OEM-A35-7 | — | — | — |
| A29 | Aux 5 | — | W43 | — | 0.5 | OEM-A35-5 | — | — | — |
| A3 | Injection 2 | — | W24 | — | 0.5 | OEM-A36-14 | — | — | — |
| A30 | Digital Input 1 | — | W14 | — | 0.5 | OEM-A34-26 | — | — | — |
| A31 | Digital Input 2 | — | W15 | — | 0.5 | OEM-A34-25 | — | — | — |
| A32 | +5V Out | — | W11 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W33 | — | 0.5 | OEM-A35-23 | — | — | — |
| A4 | Injection 1 | — | W23 | — | 0.5 | OEM-A36-12 | — | — | — |
| A6 | Ignition Switch | — | W36 | — | 0.5 | OEM-A33-27 | — | — | — |
| A8 | Trigger 1 | — | W12 | — | 0.5 | OEM-A34-16 | — | — | — |
| A9 | Trigger 2 | — | W13 | — | 0.5 | OEM-A34-14 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W30 | — | 0.5 | OEM-A36-23 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | — | — | — | — | — | — | — |
| B13 | Ignition 5 | — | — | — | — | — | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W56 | — | 0.5 | OEM-A34-20 | — | — | — |
| B16 | Analogue Volt 7 | — | W57 | — | 0.5 | OEM-A34-21 | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W68 | — | 0.5 | OEM-A33-16 | — | — | — |
| B2 | Injection 7 | — | W29 | — | 0.5 | OEM-A36-13 | — | — | — |
| B20 | Digital Input 5 | — | W67 | — | 0.5 | OEM-A33-15 | — | — | — |
| B21 | Digital Input 4 | — | W66 | — | 0.5 | OEM-A33-14 | — | — | — |
| B23 | Analogue Volt 8 | — | W60 | — | 0.5 | OEM-A33-8 | — | — | — |
| B24 | Analogue Volt 9 | — | W61 | — | 0.5 | OEM-A34-11 | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | W72 | — | 0.5 | OEM-A35-26 | — | — | — |
| B28 | Digital Input 9 | — | W71 | — | 0.5 | OEM-A33-7 | — | — | — |
| B29 | Digital Input 8 | — | W70 | — | 0.5 | OEM-A33-3 | — | — | — |
| B3 | Injection 6 | — | W28 | — | 0.5 | OEM-A36-32 | — | — | — |
| B30 | Digital Input 7 | — | W69 | — | 0.5 | OEM-A33-17 | — | — | — |
| B31 | Analogue Volt 10 | — | W62 | — | 0.5 | OEM-A34-31 | — | — | — |
| B32 | Analogue Volt 11 | — | W63 | — | 0.5 | OEM-A34-9 | — | — | — |
| B33 | Analogue Volt 5 | — | W55 | — | 0.5 | OEM-A33-22 | — | — | — |
| B4 | Injection 5 | — | W27 | — | 0.5 | OEM-A36-24 | — | — | — |
| B6 | Analogue Temp 3 | — | W59 | — | 0.5 | OEM-A36-20 | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W18 | — | 0.5 | OEM-A34-17 | — | — | — |
| B9 | Knock 1 | — | W17 | — | 0.5 | OEM-A34-28 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | W50 | — | 0.5 | OEM-A36-5 | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | W52 | — | 0.5 | OEM-A34-32 | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | W51 | — | 0.5 | OEM-A34-13 | — | — | — |
| E12 | Analogue Volt 12 | — | W64 | — | 0.5 | OEM-A35-10 | — | — | — |
| E13 | Analogue Volt 13 | — | W65 | — | 0.5 | OEM-A35-20 | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W41 | — | 0.5 | OEM-A35-17 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | W49 | — | 0.5 | OEM-A36-16 | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W42 | — | 0.5 | OEM-A35-35 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | W48 | — | 0.5 | OEM-A36-7 | — | — | — |
| E4 | Injection 9 | — | W47 | — | 0.5 | OEM-A36-17 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | W54 | — | 0.5 | OEM-A35-19 | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | W53 | — | 0.5 | OEM-A35-1 | — | — | — |
OEM-A33
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (+B2, main relay) | — | — | — | — | — | — | — | — |
| 12 | Intake air temperature (THA, in MAF) | — | W58 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 14 | Starter signal (STSW2) | — | W66 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 15 | Clutch switch (CLSW) | — | W67 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 16 | Neutral switch (NSW) | — | W68 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 17 | Starter signal (STSW2) | — | W69 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 18 | CAN low (CANL) | — | — | — | — | — | — | — | — |
| 19 | CAN high (CANH) | — | — | — | — | — | — | — | — |
| 2 | Battery constant (BATT, memory) | — | — | — | — | — | — | — | — |
| 20 | Blower relay (HB) | — | W40 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 22 | Mass air flow (VG) | — | W55 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| 27 | Ignition switch sense (IGSW, IG2 relay) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 28 | Shield ground (SLE2) | — | — | — | — | — | — | — | — |
| 29 | MAF sensor ground (E2G) | — | — | — | — | — | — | — | — |
| 3 | Stop light switch (ST1-) | — | W70 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 4 | Power ground (EC) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Stop light switch (STP) | — | W71 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 8 | A/C pressure sensor (ACP) | — | W60 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
OEM-A34
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power ground (E03) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | DI injector confirmation (IJF1) | — | W61 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 13 | High-pressure fuel pump spill valve (FPF) | — | W51 | — | 0.5 | G5VOODOOPROV-E-E11 | — | — | — |
| 14 | VVT cam sensor exhaust bank 1 (EV1+) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 15 | VVT cam sensor intake bank 2 (VV2+) | — | W16 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 16 | Crank position (NE+) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 17 | Knock sensor 2 (KNK2) | — | W18 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 18 | A/F ratio sensor (A1A-) | — | — | — | — | — | — | — | — |
| 19 | A/F ratio sensor (A1A+) | — | — | — | — | — | — | — | — |
| 2 | Power ground (E04) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Manifold absolute pressure (PIM) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 21 | Heated oxygen sensor (OX1B, rear) | — | W57 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 25 | VVT cam sensor exhaust bank 2 (EV2+) | — | W15 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 26 | VVT cam sensor intake bank 1 (VV1+) | — | W14 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 27 | Crank position return (NE-) | — | — | — | — | — | — | — | — |
| 28 | Knock sensor 1 (KNK1) | — | W17 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 29 | Shield ground (EKNK) | — | — | — | — | — | — | — | — |
| 3 | Power ground (E05) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Shield ground (SLE1) | — | — | — | — | — | — | — | — |
| 31 | DI injector confirmation (IJF2) | — | W62 | — | 0.5 | G5VOODOOPROV-B-B31 | — | — | — |
| 32 | High-pressure fuel pump spill valve (FPD) | — | W52 | — | 0.5 | G5VOODOOPROV-E-E10 | — | — | — |
| 34 | OCV power source (VCV, 5V) | — | W7 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Shield ground (SLE3) | — | — | — | — | — | — | — | — |
| 5 | A/F ratio sensor heater (HA1A) | — | W45 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 6 | ECU power (+B, main relay) | — | — | — | — | — | — | — | — |
| 9 | Fuel pressure sensor (PR) | — | W63 | — | 0.5 | G5VOODOOPROV-B-B32 | — | — | — |
OEM-A35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Canister vent valve (VPMP) | — | W53 | — | 0.5 | G5VOODOOPROV-E-E9 | — | — | — |
| 10 | Fuel pump control monitor (DI) | — | W64 | — | 0.5 | G5VOODOOPROV-E-E12 | — | — | — |
| 11 | Cooling fan relay 3 (FAN1) | — | W39 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 12 | Cooling fan relay 2 (FAN2) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 13 | EFI main relay 1 (SSHUT) | — | W37 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 15 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 17 | ETCS relay (MCR) | — | W41 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 19 | Fuel pump control (FPC) | — | W54 | — | 0.5 | G5VOODOOPROV-E-E8 | — | — | — |
| 20 | Canister pressure sensor (PPMP) | — | W65 | — | 0.5 | G5VOODOOPROV-E-E13 | — | — | — |
| 21 | Accelerator pedal 5V supply (VCPA) | — | W8 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Accelerator pedal 5V supply (VCP2) | — | W9 | — | 0.5 | SP-5V1-1 | — | — | — |
| 23 | Accelerator pedal position (VPA) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 26 | Starter signal (STA) | — | W72 | — | 0.5 | G5VOODOOPROV-B-B27 | — | — | — |
| 29 | Accelerator pedal ground (EPA) | — | — | — | — | — | — | — | — |
| 30 | Accelerator pedal ground (EPA2) | — | — | — | — | — | — | — | — |
| 31 | Accelerator pedal position 2 (VPA2) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 35 | A/C clutch relay (AC) | — | W42 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 5 | Injector relay (IREL) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 7 | ETCS relay (+BM) | — | W44 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 8 | Leak detection pump (MPMP) | — | — | — | — | — | — | — | — |
OEM-A36
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Throttle actuator motor - (M-) | — | — | — | — | — | — | — | — |
| 10 | Ignition coil 2 (IGT2) | — | W20 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 11 | Purge valve (PRG) | — | — | — | — | — | — | — | — |
| 12 | Injector 1 port (#10) | — | W23 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 13 | Injector 4 port (#40) | — | W29 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 14 | Injector 1 direct (#1) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 16 | OCV intake bank 2 (OC2) | — | W49 | — | 0.5 | G5VOODOOPROV-E-E2 | — | — | — |
| 17 | OCV intake bank 1 (OC1) | — | W47 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 18 | Throttle position (VTA1) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 19 | Sensor 5V supply (VC) | — | W10 | — | 0.5 | SP-5V1-1 | — | — | — |
| 2 | Throttle actuator motor + (M+) | — | — | — | — | — | — | — | — |
| 20 | Oil temperature (OT) | — | W59 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 21 | Ignition coil 1 (IGT1) | — | W19 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 22 | Injector 2 port (#20) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 23 | Injector 4 direct (#4) | — | W30 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 24 | Injector 3 direct (#3) | — | W27 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 25 | Injector 2 direct (#2) | — | W26 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 28 | Throttle position 2 (VTA2) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 29 | Sensor ground (E1) | — | — | — | — | — | — | — | — |
| 3 | Power ground (E02) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Engine coolant temperature (THW) | — | W35 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 31 | Ignition coil 3 (IGT3) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 32 | Injector 3 port (#30) | — | W28 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 4 | Power ground (E01) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | OCV exhaust bank 2 (OE2) | — | W50 | — | 0.5 | G5VOODOOPROV-E-E1 | — | — | — |
| 6 | Heated oxygen sensor heater (HT1B) | — | W46 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 7 | OCV exhaust bank 1 (OE1) | — | W48 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 8 | Ignition coil 4 (IGT4) | — | W22 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W7 | — | 0.5 | OEM-A34-34 | — | — | — |
| 1 | — | — | W8 | — | 0.5 | OEM-A35-21 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | OEM-A35-22 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | OEM-A36-19 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A33-4 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A34-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-A34-2 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-A34-3 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A36-3 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A36-4 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A33-1 | ECU power (+B2, main relay) | power_in | — | — | — | single_source | |
| OEM-A33-12 | Intake air temperature (THA, in MAF) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-A33-14 | Starter signal (STSW2) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-A33-15 | Clutch switch (CLSW) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-A33-16 | Neutral switch (NSW) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-A33-17 | Starter signal (STSW2) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-A33-18 | CAN low (CANL) | can_l | — | — | — | single_source | |
| OEM-A33-19 | CAN high (CANH) | can_h | — | — | — | single_source | |
| OEM-A33-2 | Battery constant (BATT, memory) | power_in | — | — | — | single_source | |
| OEM-A33-20 | Blower relay (HB) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-A33-22 | Mass air flow (VG) | analog_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | single_source | |
| OEM-A33-27 | Ignition switch sense (IGSW, IG2 relay) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | single_source | |
| OEM-A33-28 | Shield ground (SLE2) | shield | — | — | — | single_source | |
| OEM-A33-29 | MAF sensor ground (E2G) | sensor_ground | — | — | — | single_source | |
| OEM-A33-3 | Stop light switch (ST1-) | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-A33-4 | Power ground (EC) | ground | — | — | — | single_source | |
| OEM-A33-7 | Stop light switch (STP) | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-A33-8 | A/C pressure sensor (ACP) | analog_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | single_source | |
| OEM-A34-1 | Power ground (E03) | ground | — | — | — | single_source | |
| OEM-A34-11 | DI injector confirmation (IJF1) | analog_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | single_source | |
| OEM-A34-13 | High-pressure fuel pump spill valve (FPF) | low_side_out | G5VOODOOPROV-E-E11 | Injection 13 / Ignition 9 | injector_out | single_source | |
| OEM-A34-14 | VVT cam sensor exhaust bank 1 (EV1+) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-A34-15 | VVT cam sensor intake bank 2 (VV2+) | trigger_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-A34-16 | Crank position (NE+) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-A34-17 | Knock sensor 2 (KNK2) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | single_source | |
| OEM-A34-18 | A/F ratio sensor (A1A-) | — | — | — | — | single_source | |
| OEM-A34-19 | A/F ratio sensor (A1A+) | — | — | — | — | single_source | |
| OEM-A34-2 | Power ground (E04) | ground | — | — | — | single_source | |
| OEM-A34-20 | Manifold absolute pressure (PIM) | analog_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-A34-21 | Heated oxygen sensor (OX1B, rear) | lambda_nb_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-A34-25 | VVT cam sensor exhaust bank 2 (EV2+) | trigger_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-A34-26 | VVT cam sensor intake bank 1 (VV1+) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-A34-27 | Crank position return (NE-) | sensor_ground | — | — | — | single_source | |
| OEM-A34-28 | Knock sensor 1 (KNK1) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-A34-29 | Shield ground (EKNK) | shield | — | — | — | single_source | |
| OEM-A34-3 | Power ground (E05) | ground | — | — | — | single_source | |
| OEM-A34-30 | Shield ground (SLE1) | shield | — | — | — | single_source | |
| OEM-A34-31 | DI injector confirmation (IJF2) | analog_in | G5VOODOOPROV-B-B31 | Analogue Volt 10 | analog_in | single_source | |
| OEM-A34-32 | High-pressure fuel pump spill valve (FPD) | low_side_out | G5VOODOOPROV-E-E10 | Injection 14 / Ignition 10 | injector_out | single_source | |
| OEM-A34-34 | OCV power source (VCV, 5V) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-A34-35 | Shield ground (SLE3) | shield | — | — | — | single_source | |
| OEM-A34-5 | A/F ratio sensor heater (HA1A) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-A34-6 | ECU power (+B, main relay) | power_in | — | — | — | single_source | |
| OEM-A34-9 | Fuel pressure sensor (PR) | analog_in | G5VOODOOPROV-B-B32 | Analogue Volt 11 | analog_in | single_source | |
| OEM-A35-1 | Canister vent valve (VPMP) | low_side_out | G5VOODOOPROV-E-E9 | Injection 15 / Ignition 11 | injector_out | single_source | |
| OEM-A35-10 | Fuel pump control monitor (DI) | analog_in | G5VOODOOPROV-E-E12 | Analogue Volt 12 | analog_in | single_source | |
| OEM-A35-11 | Cooling fan relay 3 (FAN1) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-A35-12 | Cooling fan relay 2 (FAN2) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-A35-13 | EFI main relay 1 (SSHUT) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-A35-15 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-A35-17 | ETCS relay (MCR) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-A35-19 | Fuel pump control (FPC) | low_side_out | G5VOODOOPROV-E-E8 | Injection 16 / Ignition 12 | injector_out | single_source | |
| OEM-A35-20 | Canister pressure sensor (PPMP) | analog_in | G5VOODOOPROV-E-E13 | Analogue Volt 13 | analog_in | single_source | |
| OEM-A35-21 | Accelerator pedal 5V supply (VCPA) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-A35-22 | Accelerator pedal 5V supply (VCP2) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-A35-23 | Accelerator pedal position (VPA) | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-A35-26 | Starter signal (STA) | digital_in | G5VOODOOPROV-B-B27 | Digital Input 10 | digital_in | single_source | |
| OEM-A35-29 | Accelerator pedal ground (EPA) | sensor_ground | — | — | — | single_source | |
| OEM-A35-30 | Accelerator pedal ground (EPA2) | sensor_ground | — | — | — | single_source | |
| OEM-A35-31 | Accelerator pedal position 2 (VPA2) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-A35-35 | A/C clutch relay (AC) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-A35-5 | Injector relay (IREL) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source | |
| OEM-A35-7 | ETCS relay (+BM) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-A35-8 | Leak detection pump (MPMP) | low_side_out | — | — | — | single_source | |
| OEM-A36-1 | Throttle actuator motor - (M-) | hbridge_out | — | — | — | single_source | |
| OEM-A36-10 | Ignition coil 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | single_source | |
| OEM-A36-11 | Purge valve (PRG) | low_side_out | — | — | — | single_source | |
| OEM-A36-12 | Injector 1 port (#10) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-A36-13 | Injector 4 port (#40) | injector_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-A36-14 | Injector 1 direct (#1) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source | |
| OEM-A36-16 | OCV intake bank 2 (OC2) | low_side_out | G5VOODOOPROV-E-E2 | Injection 11 | injector_out | single_source | |
| OEM-A36-17 | OCV intake bank 1 (OC1) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-A36-18 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | single_source | |
| OEM-A36-19 | Sensor 5V supply (VC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-A36-2 | Throttle actuator motor + (M+) | hbridge_out | — | — | — | single_source | |
| OEM-A36-20 | Oil temperature (OT) | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | single_source | |
| OEM-A36-21 | Ignition coil 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-A36-22 | Injector 2 port (#20) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-A36-23 | Injector 4 direct (#4) | injector_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-A36-24 | Injector 3 direct (#3) | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-A36-25 | Injector 2 direct (#2) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-A36-28 | Throttle position 2 (VTA2) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | single_source | |
| OEM-A36-29 | Sensor ground (E1) | sensor_ground | — | — | — | single_source | |
| OEM-A36-3 | Power ground (E02) | ground | — | — | — | single_source | |
| OEM-A36-30 | Engine coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-A36-31 | Ignition coil 3 (IGT3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | single_source | |
| OEM-A36-32 | Injector 3 port (#30) | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-A36-4 | Power ground (E01) | ground | — | — | — | single_source | |
| OEM-A36-5 | OCV exhaust bank 2 (OE2) | low_side_out | G5VOODOOPROV-E-E1 | Injection 12 | injector_out | single_source | |
| OEM-A36-6 | Heated oxygen sensor heater (HT1B) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-A36-7 | OCV exhaust bank 1 (OE1) | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | single_source | |
| OEM-A36-8 | Ignition coil 4 (IGT4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-4 | SP-GND-1 | 0.85 | no route | Power ground (EC) | — | |
| W2 | OEM-A34-1 | SP-GND-1 | 0.85 | no route | Power ground (E03) | — | |
| W3 | OEM-A34-2 | SP-GND-1 | 0.85 | no route | Power ground (E04) | — | |
| W4 | OEM-A34-3 | SP-GND-1 | 0.85 | no route | Power ground (E05) | — | |
| W5 | OEM-A36-3 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W6 | OEM-A36-4 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W7 | OEM-A34-34 | SP-5V1-1 | 0.5 | no route | OCV power source (VCV, 5V) | — | |
| W8 | OEM-A35-21 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCPA) | — | |
| W9 | OEM-A35-22 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCP2) | — | |
| W10 | OEM-A36-19 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VC) | — | |
| W11 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W12 | OEM-A34-16 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position (NE+) | — | |
| W13 | OEM-A34-14 | G5VOODOOPROV-A-A9 | 0.5 | no route | VVT cam sensor exhaust bank 1 (EV1+) | — | |
| W14 | OEM-A34-26 | G5VOODOOPROV-A-A30 | 0.5 | no route | VVT cam sensor intake bank 1 (VV1+) | — | |
| W15 | OEM-A34-25 | G5VOODOOPROV-A-A31 | 0.5 | no route | VVT cam sensor exhaust bank 2 (EV2+) | — | |
| W16 | OEM-A34-15 | G5VOODOOPROV-A-A23 | 0.5 | no route | VVT cam sensor intake bank 2 (VV2+) | — | |
| W17 | OEM-A34-28 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W18 | OEM-A34-17 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W19 | OEM-A36-21 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W20 | OEM-A36-10 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W21 | OEM-A36-31 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W22 | OEM-A36-8 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W23 | OEM-A36-12 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 port (#10) | — | |
| W24 | OEM-A36-14 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 1 direct (#1) | — | |
| W25 | OEM-A36-22 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 2 port (#20) | — | |
| W26 | OEM-A36-25 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 2 direct (#2) | — | |
| W27 | OEM-A36-24 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 3 direct (#3) | — | |
| W28 | OEM-A36-32 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 3 port (#30) | — | |
| W29 | OEM-A36-13 | G5VOODOOPROV-B-B2 | 0.5 | no route | Injector 4 port (#40) | — | |
| W30 | OEM-A36-23 | G5VOODOOPROV-B-B1 | 0.5 | no route | Injector 4 direct (#4) | — | |
| W31 | OEM-A35-31 | G5VOODOOPROV-A-A17 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W32 | OEM-A36-28 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W33 | OEM-A35-23 | G5VOODOOPROV-A-A33 | 0.5 | no route | Accelerator pedal position (VPA) | — | |
| W34 | OEM-A36-18 | G5VOODOOPROV-A-A14 | 0.5 | no route | Throttle position (VTA1) | — | |
| W35 | OEM-A36-30 | G5VOODOOPROV-A-A15 | 0.5 | no route | Engine coolant temperature (THW) | — | |
| W36 | OEM-A33-27 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch sense (IGSW, IG2 relay) | — | |
| W37 | OEM-A35-13 | G5VOODOOPROV-A-A21 | 0.5 | no route | EFI main relay 1 (SSHUT) | — | |
| W38 | OEM-A35-12 | G5VOODOOPROV-A-A20 | 0.5 | no route | Cooling fan relay 2 (FAN2) | — | |
| W39 | OEM-A35-11 | G5VOODOOPROV-A-A19 | 0.5 | no route | Cooling fan relay 3 (FAN1) | — | |
| W40 | OEM-A33-20 | G5VOODOOPROV-A-A18 | 0.5 | no route | Blower relay (HB) | — | |
| W41 | OEM-A35-17 | G5VOODOOPROV-E-E15 | 0.5 | no route | ETCS relay (MCR) | — | |
| W42 | OEM-A35-35 | G5VOODOOPROV-E-E22 | 0.5 | no route | A/C clutch relay (AC) | — | |
| W43 | OEM-A35-5 | G5VOODOOPROV-A-A29 | 0.5 | no route | Injector relay (IREL) | — | |
| W44 | OEM-A35-7 | G5VOODOOPROV-A-A28 | 0.5 | no route | ETCS relay (+BM) | — | |
| W45 | OEM-A34-5 | G5VOODOOPROV-A-A27 | 0.5 | no route | A/F ratio sensor heater (HA1A) | — | |
| W46 | OEM-A36-6 | G5VOODOOPROV-A-A26 | 0.5 | no route | Heated oxygen sensor heater (HT1B) | — | |
| W47 | OEM-A36-17 | G5VOODOOPROV-E-E4 | 0.5 | no route | OCV intake bank 1 (OC1) | — | |
| W48 | OEM-A36-7 | G5VOODOOPROV-E-E3 | 0.5 | no route | OCV exhaust bank 1 (OE1) | — | |
| W49 | OEM-A36-16 | G5VOODOOPROV-E-E2 | 0.5 | no route | OCV intake bank 2 (OC2) | — | |
| W50 | OEM-A36-5 | G5VOODOOPROV-E-E1 | 0.5 | no route | OCV exhaust bank 2 (OE2) | — | |
| W51 | OEM-A34-13 | G5VOODOOPROV-E-E11 | 0.5 | no route | High-pressure fuel pump spill valve (FPF) | — | |
| W52 | OEM-A34-32 | G5VOODOOPROV-E-E10 | 0.5 | no route | High-pressure fuel pump spill valve (FPD) | — | |
| W53 | OEM-A35-1 | G5VOODOOPROV-E-E9 | 0.5 | no route | Canister vent valve (VPMP) | — | |
| W54 | OEM-A35-19 | G5VOODOOPROV-E-E8 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W55 | OEM-A33-22 | G5VOODOOPROV-B-B33 | 0.5 | no route | Mass air flow (VG) | — | |
| W56 | OEM-A34-20 | G5VOODOOPROV-B-B15 | 0.5 | no route | Manifold absolute pressure (PIM) | — | |
| W57 | OEM-A34-21 | G5VOODOOPROV-B-B16 | 0.5 | no route | Heated oxygen sensor (OX1B, rear) | — | |
| W58 | OEM-A33-12 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (THA, in MAF) | — | |
| W59 | OEM-A36-20 | G5VOODOOPROV-B-B6 | 0.5 | no route | Oil temperature (OT) | — | |
| W60 | OEM-A33-8 | G5VOODOOPROV-B-B23 | 0.5 | no route | A/C pressure sensor (ACP) | — | |
| W61 | OEM-A34-11 | G5VOODOOPROV-B-B24 | 0.5 | no route | DI injector confirmation (IJF1) | — | |
| W62 | OEM-A34-31 | G5VOODOOPROV-B-B31 | 0.5 | no route | DI injector confirmation (IJF2) | — | |
| W63 | OEM-A34-9 | G5VOODOOPROV-B-B32 | 0.5 | no route | Fuel pressure sensor (PR) | — | |
| W64 | OEM-A35-10 | G5VOODOOPROV-E-E12 | 0.5 | no route | Fuel pump control monitor (DI) | — | |
| W65 | OEM-A35-20 | G5VOODOOPROV-E-E13 | 0.5 | no route | Canister pressure sensor (PPMP) | — | |
| W66 | OEM-A33-14 | G5VOODOOPROV-B-B21 | 0.5 | no route | Starter signal (STSW2) | — | |
| W67 | OEM-A33-15 | G5VOODOOPROV-B-B20 | 0.5 | no route | Clutch switch (CLSW) | — | |
| W68 | OEM-A33-16 | G5VOODOOPROV-B-B19 | 0.5 | no route | Neutral switch (NSW) | — | |
| W69 | OEM-A33-17 | G5VOODOOPROV-B-B30 | 0.5 | no route | Starter signal (STSW2) | — | |
| W70 | OEM-A33-3 | G5VOODOOPROV-B-B29 | 0.5 | no route | Stop light switch (ST1-) | — | |
| W71 | OEM-A33-7 | G5VOODOOPROV-B-B28 | 0.5 | no route | Stop light switch (STP) | — | |
| W72 | OEM-A35-26 | G5VOODOOPROV-B-B27 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (36)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 1 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | REQUIRED_UNMAPPED | OEM-A33-1 | Required OEM function "ECU power (+B2, main relay)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A33-4 | Required OEM function "Power ground (EC)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A34-1 | Required OEM function "Power ground (E03)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A34-2 | Required OEM function "Power ground (E04)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A34-3 | Required OEM function "Power ground (E05)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A34-6 | Required OEM function "ECU power (+B, main relay)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A36-1 | Required OEM function "Throttle actuator motor - (M-)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A36-2 | Required OEM function "Throttle actuator motor + (M+)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A36-29 | Required OEM function "Sensor ground (E1)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A36-3 | Required OEM function "Power ground (E02)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A36-4 | Required OEM function "Power ground (E01)" (ground) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A18 | G5VOODOOPROV-A-A18 "Aux 4" drives OEM-A33-20 Blower relay (HB) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A19 | G5VOODOOPROV-A-A19 "Aux 3" drives OEM-A35-11 Cooling fan relay 3 (FAN1) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-A35-12 Cooling fan relay 2 (FAN2) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-A35-13 EFI main relay 1 (SSHUT) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A28 | G5VOODOOPROV-A-A28 "Aux 6" drives OEM-A35-7 ETCS relay (+BM) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A29 | G5VOODOOPROV-A-A29 "Aux 5" drives OEM-A35-5 Injector relay (IREL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E15 | G5VOODOOPROV-E-E15 "Aux 13 / WB Heater 1" drives OEM-A35-17 ETCS relay (MCR) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E22 | G5VOODOOPROV-E-E22 "Aux 14 / WB Heater 2" drives OEM-A35-35 A/C clutch relay (AC) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-A34-15 ↔ G5VOODOOPROV-A-A23 | OEM-A34-15 "VVT cam sensor intake bank 2 (VV2+)" [trigger_in] is wired to G5VOODOOPROV-A-A23 "Digital Input 3" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-A34-25 ↔ G5VOODOOPROV-A-A31 | OEM-A34-25 "VVT cam sensor exhaust bank 2 (EV2+)" [trigger_in] is wired to G5VOODOOPROV-A-A31 "Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-A34-26 ↔ G5VOODOOPROV-A-A30 | OEM-A34-26 "VVT cam sensor intake bank 1 (VV1+)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-A34-13 ↔ G5VOODOOPROV-E-E11 | OEM-A34-13 "High-pressure fuel pump spill valve (FPF)" [low_side_out] is wired to G5VOODOOPROV-E-E11 "Injection 13 / Ignition 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A34-32 ↔ G5VOODOOPROV-E-E10 | OEM-A34-32 "High-pressure fuel pump spill valve (FPD)" [low_side_out] is wired to G5VOODOOPROV-E-E10 "Injection 14 / Ignition 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A34-5 ↔ G5VOODOOPROV-A-A27 | OEM-A34-5 "A/F ratio sensor heater (HA1A)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A35-1 ↔ G5VOODOOPROV-E-E9 | OEM-A35-1 "Canister vent valve (VPMP)" [low_side_out] is wired to G5VOODOOPROV-E-E9 "Injection 15 / Ignition 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A35-19 ↔ G5VOODOOPROV-E-E8 | OEM-A35-19 "Fuel pump control (FPC)" [low_side_out] is wired to G5VOODOOPROV-E-E8 "Injection 16 / Ignition 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A35-5 ↔ G5VOODOOPROV-A-A29 | OEM-A35-5 "Injector relay (IREL)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A35-7 ↔ G5VOODOOPROV-A-A28 | OEM-A35-7 "ETCS relay (+BM)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A36-16 ↔ G5VOODOOPROV-E-E2 | OEM-A36-16 "OCV intake bank 2 (OC2)" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A36-17 ↔ G5VOODOOPROV-E-E4 | OEM-A36-17 "OCV intake bank 1 (OC1)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A36-5 ↔ G5VOODOOPROV-E-E1 | OEM-A36-5 "OCV exhaust bank 2 (OE2)" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A36-6 ↔ G5VOODOOPROV-A-A26 | OEM-A36-6 "Heated oxygen sensor heater (HT1B)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A36-7 ↔ G5VOODOOPROV-E-E3 | OEM-A36-7 "OCV exhaust bank 1 (OE1)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 15 optional OEM pins are not mapped: OEM-A33-18 CAN low (CANL); OEM-A33-19 CAN high (CANH); OEM-A33-28 Shield ground (SLE2); OEM-A33-29 MAF sensor ground (E2G); OEM-A34-18 A/F ratio sensor (A1A-); OEM-A34-19 A/F ratio sensor (A1A+); OEM-A34-27 Crank position return (NE-); OEM-A34-29 Shield ground (EKNK); OEM-A34-30 Shield ground (SLE1); OEM-A34-35 Shield ground (SLE3); OEM-A35-15 Tachometer output (TACH); OEM-A35-29 Accelerator pedal ground (EPA); OEM-A35-30 Accelerator pedal ground (EPA2); OEM-A35-8 Leak detection pump (MPMP); OEM-A36-11 Purge valve (PRG) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-A33-2 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-A33 1: ECU power (+B2, main relay): no rule for class ecu_main_power; wire by hand - OEM-A34 6: ECU power (+B, main relay): no rule for class ecu_main_power; wire by hand - OEM-A36 1: Throttle actuator motor - (M-): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-A36 2: Throttle actuator motor + (M+): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-A36 29: Sensor ground (E1): no rule for class ground_sensor; wire by hand Not wired: - OEM-A33 2: Battery constant (BATT, memory): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-A33 28: Shield ground (SLE2): no shield pin on Link G5 Voodoo Pro V1 - OEM-A34 29: Shield ground (EKNK): no shield pin on Link G5 Voodoo Pro V1 - OEM-A34 30: Shield ground (SLE1): no shield pin on Link G5 Voodoo Pro V1 - OEM-A34 35: Shield ground (SLE3): no shield pin on Link G5 Voodoo Pro V1 - OEM-A35 8: Leak detection pump (MPMP): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V1 - OEM-A36 11: Purge valve (PRG): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V1 - OEM-A35 15: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V1 - OEM-A33 19: CAN high (CANH): no free can_h on Link G5 Voodoo Pro V1 - OEM-A33 18: CAN low (CANL): no free can_l on Link G5 Voodoo Pro V1 - OEM-A33 29: MAF sensor ground (E2G): no rule for class ground_sensor; wire by hand - OEM-A34 18: A/F ratio sensor (A1A-): not classified in the library; wire by hand - OEM-A34 19: A/F ratio sensor (A1A+): not classified in the library; wire by hand - OEM-A34 27: Crank position return (NE-): no rule for class ground_sensor; wire by hand - OEM-A35 29: Accelerator pedal ground (EPA): no rule for class ground_sensor; wire by hand - OEM-A35 30: Accelerator pedal ground (EPA2): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 4 | vendor_doc | Scion FR-S / Toyota 86 Repair Manual (2013) — FA20 ECM terminal pinout (SFI system) | https://gt86.me/images/0/09/2013_Scion_FR-S_Repair_Manual.pdf | — | — | — |