Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) → ECUMASTER EMU PRO 16 (auto)
Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) — ECUMASTER — EMU PRO 16
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 2: read the Findings page before cutting any wire |
| Size of the job | 85 wires · 11 connectors · 5 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C85-16 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C88-28 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C88-33 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C88-34 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-C84-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-C84-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-C84-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-C84-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-C84-1 | EMUPRO16-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-C84-5 | EMUPRO16-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-C88-5 | EMUPRO16-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-C88-4 | EMUPRO16-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-C88-24 | EMUPRO16-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C88-16 | EMUPRO16-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C88-15 | EMUPRO16-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-C88-26 | EMUPRO16-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C88-30 | EMUPRO16-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-C88-29 | EMUPRO16-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C88-10 | EMUPRO16-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C88-9 | EMUPRO16-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C88-8 | EMUPRO16-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C86-9 | EMUPRO16-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C84-8 | EMUPRO16-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C84-7 | EMUPRO16-C-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C84-20 | EMUPRO16-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C85-2 | EMUPRO16-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C86-5 | EMUPRO16-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C88-3 | EMUPRO16-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-C88-11 | EMUPRO16-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C88-23 | EMUPRO16-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C88-17 | EMUPRO16-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C88-22 | EMUPRO16-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C88-21 | EMUPRO16-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C88-20 | EMUPRO16-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C85-3 | EMUPRO16-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C85-4 | EMUPRO16-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C86-8 | EMUPRO16-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C88-27 | EMUPRO16-D-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C88-7 | EMUPRO16-D-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C84-12 | EMUPRO16-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C84-13 | EMUPRO16-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C84-14 | EMUPRO16-C-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C86-13 | EMUPRO16-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C86-12 | EMUPRO16-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C84-4 | EMUPRO16-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C84-9 | EMUPRO16-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C84-15 | EMUPRO16-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-C84-3 | EMUPRO16-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-C85-1 | EMUPRO16-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-C85-10 | EMUPRO16-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C88-12 | EMUPRO16-D-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C85-5 | EMUPRO16-D-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C86-7 | EMUPRO16-C-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-C86-10 | EMUPRO16-C-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-C86-11 | EMUPRO16-D-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-C86-6 | EMUPRO16-C-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-C85-14 | EMUPRO16-D-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-C85-6 | EMUPRO16-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-C86-1 | EMUPRO16-D-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-C86-17 | EMUPRO16-C-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-C86-18 | EMUPRO16-D-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-C86-19 | EMUPRO16-C-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-C86-2 | EMUPRO16-C-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-C86-20 | EMUPRO16-C-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-C86-25 | EMUPRO16-C-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-C86-28 | EMUPRO16-C-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-C86-3 | EMUPRO16-C-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-C88-13 | EMUPRO16-C-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W83 | OEM-C88-14 | EMUPRO16-C-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W84 | OEM-C88-31 | EMUPRO16-D-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W85 | OEM-C88-32 | EMUPRO16-D-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUPRO16-A-12 | EMUPRO16-A-20 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | EMUPRO16-A-11 | EMUPRO16-A-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | EMUPRO16-A-11 | EMUPRO16-B-14 | open (OL) | power ground must not touch +12 V supply | |
| 4 | EMUPRO16-A-12 | EMUPRO16-B-14 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 5 | EMUPRO16-A-20 | EMUPRO16-B-14 | open (OL) | sensor ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUPRO16-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 8 | — | — | — | — | — | — | — | — |
| 2 | Injector 1 | — | W33 | — | 0.5 | OEM-C88-10 | — | — | — |
| 3 | Injector 2 | — | W34 | — | 0.5 | OEM-C88-9 | — | — | — |
| 4 | Injector 3 | — | W35 | — | 0.5 | OEM-C88-8 | — | — | — |
| 5 | Injector 4 | — | — | — | — | — | — | — | — |
| 6 | Injector 5 | — | — | — | — | — | — | — | — |
| 7 | Injector 6 | — | — | — | — | — | — | — | — |
| 8 | Injector 7 | — | — | — | — | — | — | — | — |
| 9 | Injector 8 | — | — | — | — | — | — | — | — |
| 10 | Ignition 7 | — | — | — | — | — | — | — | — |
| 11 | Power GND | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +5V source A | — | W23 | — | 0.5 | OEM-C84-1 | — | — | — |
| 13 | Digital 2 | — | W58 | — | 0.5 | OEM-C86-12 | — | — | — |
| 14 | Digital 4 | — | W60 | — | 0.5 | OEM-C84-9 | — | — | — |
| 15 | Digital 8 | — | W64 | — | 0.5 | OEM-C85-10 | — | — | — |
| 16 | Digital 6 (turbo) | — | W62 | — | 0.5 | OEM-C84-3 | — | — | — |
| 17 | Power GND | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition 6 | — | W32 | — | 0.5 | OEM-C88-29 | — | — | — |
| 19 | Power GND | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Digital GND | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital 1 (crank) | — | W24 | — | 0.5 | OEM-C84-5 | — | — | — |
| 22 | Digital 3 | — | W59 | — | 0.5 | OEM-C84-4 | — | — | — |
| 23 | Digital 7 | — | W63 | — | 0.5 | OEM-C85-1 | — | — | — |
| 24 | Digital 5 (turbo) | — | W61 | — | 0.5 | OEM-C84-15 | — | — | — |
| 25 | Auxiliary 9 | — | W48 | — | 0.5 | OEM-C88-20 | — | — | — |
| 26 | Ignition 5 | — | W31 | — | 0.5 | OEM-C88-30 | — | — | — |
| 27 | Ignition 4 | — | W30 | — | 0.5 | OEM-C88-26 | — | — | — |
| 28 | Ignition 3 | — | W29 | — | 0.5 | OEM-C88-15 | — | — | — |
| 29 | Ignition 2 | — | W28 | — | 0.5 | OEM-C88-16 | — | — | — |
| 30 | Ignition 1 | — | W27 | — | 0.5 | OEM-C88-24 | — | — | — |
| 31 | CAN 1 high (PC comm) | — | — | — | — | — | — | — | — |
| 32 | CAN 1 low (PC comm) | — | — | — | — | — | — | — | — |
| 33 | CAN 2 high | — | — | — | — | — | — | — | — |
| 34 | CAN 2 low | — | — | — | — | — | — | — | — |
EMUPRO16-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 1 (WBO heater) | — | W40 | — | 0.5 | OEM-C85-2 | — | — | — |
| 2 | Auxiliary 2 (WBO heater) | — | W41 | — | 0.5 | OEM-C86-5 | — | — | — |
| 3 | Auxiliary 3 (WBO heater) | — | W42 | — | 0.5 | OEM-C88-3 | — | — | — |
| 4 | Auxiliary 4 (WBO heater) | — | W43 | — | 0.5 | OEM-C88-11 | — | — | — |
| 5 | Auxiliary 5 | — | W44 | — | 0.5 | OEM-C88-23 | — | — | — |
| 6 | Auxiliary 6 | — | W45 | — | 0.5 | OEM-C88-17 | — | — | — |
| 7 | Auxiliary 7 | — | W46 | — | 0.5 | OEM-C88-22 | — | — | — |
| 8 | +12V supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Digital GND (flash drive) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | USB D- (flash drive) | — | — | — | — | — | — | — | — |
| 11 | USB D+ (flash drive) | — | — | — | — | — | — | — | — |
| 12 | +5V source A (flash drive) | — | — | — | — | — | — | — | — |
| 13 | Auxiliary 8 | — | W47 | — | 0.5 | OEM-C88-21 | — | — | — |
| 14 | +12V supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 15 | +12V switched | — | W36 | — | 0.5 | OEM-C86-9 | — | — | — |
| 16 | Knock sensor 1 | — | W25 | — | 0.5 | OEM-C88-5 | — | — | — |
| 17 | Knock sensor 2 | — | W26 | — | 0.5 | OEM-C88-4 | — | — | — |
| 18 | WBO 2 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 19 | Power GND | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | WBO 1 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 21 | WBO 1 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 22 | WBO 1 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
| 23 | WBO 1 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 24 | WBO 2 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 25 | WBO 2 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 26 | WBO 2 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
EMUPRO16-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 10 | — | W49 | — | 0.5 | OEM-C85-3 | — | — | — |
| 2 | Auxiliary 11 | — | W50 | — | 0.5 | OEM-C85-4 | — | — | — |
| 3 | Auxiliary 12 | — | W51 | — | 0.5 | OEM-C86-8 | — | — | — |
| 4 | Analog 7 | — | W72 | — | 0.5 | OEM-C85-6 | — | — | — |
| 5 | Analog 10 (2k2 pull) | — | W77 | — | 0.5 | OEM-C86-2 | — | — | — |
| 6 | H-bridge 1A | — | — | — | — | — | — | — | — |
| 7 | H-bridge 2B | — | — | — | — | — | — | — | — |
| 8 | H-bridge 3A | — | — | — | — | — | — | — | — |
| 9 | H-bridge 2A | — | — | — | — | — | — | — | — |
| 10 | Analog 1 (MAP) | — | W37 | — | 0.5 | OEM-C84-8 | — | — | — |
| 11 | Analog 3 | — | W55 | — | 0.5 | OEM-C84-13 | — | — | — |
| 12 | Analog 5 | — | W68 | — | 0.5 | OEM-C86-10 | — | — | — |
| 13 | Analog 8 | — | W74 | — | 0.5 | OEM-C86-17 | — | — | — |
| 14 | Analog 11 (2k2 pull) | — | W78 | — | 0.5 | OEM-C86-20 | — | — | — |
| 15 | Analog 13 (1k pull) | — | W80 | — | 0.5 | OEM-C86-28 | — | — | — |
| 16 | Analog 15 (330R pull) | — | W82 | — | 0.5 | OEM-C88-13 | — | — | — |
| 17 | H-bridge 3B | — | — | — | — | — | — | — | — |
| 18 | Analog 2 | — | W39 | — | 0.5 | OEM-C84-20 | — | — | — |
| 19 | Analog 4 | — | W57 | — | 0.5 | OEM-C86-13 | — | — | — |
| 20 | Analog 6 | — | W70 | — | 0.5 | OEM-C86-6 | — | — | — |
| 21 | Analog 9 (2k2 pull) | — | W76 | — | 0.5 | OEM-C86-19 | — | — | — |
| 22 | Analog 12 (2k2 pull) | — | W79 | — | 0.5 | OEM-C86-25 | — | — | — |
| 23 | Analog 14 (1k pull) | — | W81 | — | 0.5 | OEM-C86-3 | — | — | — |
| 24 | Analog 16 (100R pull) | — | W83 | — | 0.5 | OEM-C88-14 | — | — | — |
| 25 | H-bridge 1B | — | — | — | — | — | — | — | — |
| 26 | LIN | — | — | — | — | — | — | — | — |
| 27 | +5V source B | — | — | — | — | — | — | — | — |
| 28 | +5V source B | — | — | — | — | — | — | — | — |
| 29 | Analog GND | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Power GND | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 31 | Precision analog 1 | — | W38 | — | 0.5 | OEM-C84-7 | — | — | — |
| 32 | Precision analog 2 | — | W54 | — | 0.5 | OEM-C84-12 | — | — | — |
| 33 | Precision analog 3 | — | W56 | — | 0.5 | OEM-C84-14 | — | — | — |
| 34 | Precision analog 4 | — | W67 | — | 0.5 | OEM-C86-7 | — | — | — |
EMUPRO16-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 10 | — | — | — | — | — | — | — | — |
| 2 | Injector 11 | — | — | — | — | — | — | — | — |
| 3 | Injector 12 | — | — | — | — | — | — | — | — |
| 4 | Injector 13 | — | — | — | — | — | — | — | — |
| 5 | Injector 14 | — | — | — | — | — | — | — | — |
| 6 | Injector 15 | — | — | — | — | — | — | — | — |
| 7 | Injector 16 | — | — | — | — | — | — | — | — |
| 8 | Injector 9 | — | — | — | — | — | — | — | — |
| 9 | Analog 17 | — | W84 | — | 0.5 | OEM-C88-31 | — | — | — |
| 10 | Analog 18 | — | W85 | — | 0.5 | OEM-C88-32 | — | — | — |
| 11 | Digital 9 / Analog 19 | — | W65 | — | 0.5 | OEM-C88-12 | — | — | — |
| 12 | Digital 10 / Analog 20 | — | W66 | — | 0.5 | OEM-C85-5 | — | — | — |
| 13 | Auxiliary 13 | — | W52 | — | 0.5 | OEM-C88-27 | — | — | — |
| 14 | H-bridge 4A | — | — | — | — | — | — | — | — |
| 15 | Precision analog 6 | — | W71 | — | 0.5 | OEM-C85-14 | — | — | — |
| 16 | Precision analog 8 | — | W75 | — | 0.5 | OEM-C86-18 | — | — | — |
| 17 | Analog GND | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Power GND | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Auxiliary 14 | — | W53 | — | 0.5 | OEM-C88-7 | — | — | — |
| 20 | H-bridge 4B | — | — | — | — | — | — | — | — |
| 21 | Precision analog 5 | — | W69 | — | 0.5 | OEM-C86-11 | — | — | — |
| 22 | Precision analog 7 | — | W73 | — | 0.5 | OEM-C86-1 | — | — | — |
| 23 | Ignition 9 | — | — | — | — | — | — | — | — |
| 24 | Ignition 10 | — | — | — | — | — | — | — | — |
| 25 | Auxiliary 16 | — | — | — | — | — | — | — | — |
| 26 | Auxiliary 15 | — | — | — | — | — | — | — | — |
OEM-C84
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor supply +5V (VCC) | — | W23 | — | 0.5 | EMUPRO16-A-12 | — | — | — |
| 10 | Cam position 1 (G1) | — | — | — | — | — | — | — | — |
| 11 | Cam 1 return (G1-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | TRAC throttle position (VTA2) | — | W54 | — | 0.5 | EMUPRO16-C-32 | — | — | — |
| 13 | O2 sensor (OX1) | — | W55 | — | 0.5 | EMUPRO16-C-11 | — | — | — |
| 14 | Intake air temperature (THA) | — | W56 | — | 0.5 | EMUPRO16-C-33 | — | — | — |
| 15 | OD direct-clutch speed sensor (NCO+) | — | W61 | — | 0.5 | EMUPRO16-A-24 | — | — | — |
| 16 | Cam position 2 (G2) | — | — | — | — | — | — | — | — |
| 17 | Cam 2 return (G2-) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temperature (THW) | — | W39 | — | 0.5 | EMUPRO16-C-18 | — | — | — |
| 22 | Sensor ground (E2) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | OD direct-clutch speed sensor (NCO-) | — | W62 | — | 0.5 | EMUPRO16-A-16 | — | — | — |
| 4 | No.2 speed sensor (SP2-) | — | W59 | — | 0.5 | EMUPRO16-A-22 | — | — | — |
| 5 | Crank position (NE) | — | W24 | — | 0.5 | EMUPRO16-A-21 | — | — | — |
| 6 | Crank sensor return (NE-) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Throttle position (VTA1) | — | W38 | — | 0.5 | EMUPRO16-C-31 | — | — | — |
| 8 | Manifold pressure (PIM) | — | W37 | — | 0.5 | EMUPRO16-C-10 | — | — | — |
| 9 | No.2 speed sensor (SP2+) | — | W60 | — | 0.5 | EMUPRO16-A-14 | — | — | — |
OEM-C85
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Slave engine speed (NEO) | — | W63 | — | 0.5 | EMUPRO16-A-23 | — | — | — |
| 10 | Fuel pump diagnostic (DI) | — | W64 | — | 0.5 | EMUPRO16-A-15 | — | — | — |
| 11 | Slave TRAC throttle position (VTO2) | — | — | — | — | — | — | — | — |
| 14 | ABS active (MT only) | — | W71 | — | 0.5 | EMUPRO16-D-15 | — | — | — |
| 16 | Power ground (E1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | EFI main relay control (M-REL) | — | W40 | — | 0.5 | EMUPRO16-B-1 | — | — | — |
| 3 | Check-engine lamp (W) | — | W49 | — | 0.5 | EMUPRO16-C-1 | — | — | — |
| 4 | Fuel pump control (FPC) | — | W50 | — | 0.5 | EMUPRO16-C-2 | — | — | — |
| 5 | Diagnostic test 1 (TE1) | — | W66 | — | 0.5 | EMUPRO16-D-12 | — | — | — |
| 6 | Timing retard (TR) | — | W72 | — | 0.5 | EMUPRO16-C-4 | — | — | — |
| 7 | Slave throttle position (VTO1) | — | — | — | — | — | — | — | — |
OEM-C86
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Diagnostic test terminal (TT) | — | W73 | — | 0.5 | EMUPRO16-D-22 | — | — | — |
| 10 | A/T 2nd-gear indicator (2) | — | W68 | — | 0.5 | EMUPRO16-C-12 | — | — | — |
| 11 | Diagnostic test 2 (TE2) | — | W69 | — | 0.5 | EMUPRO16-D-21 | — | — | — |
| 12 | No.1 speed sensor (SP1) | — | W58 | — | 0.5 | EMUPRO16-A-13 | — | — | — |
| 13 | Cat temperature sensor (CCO) | — | W57 | — | 0.5 | EMUPRO16-C-19 | — | — | — |
| 14 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 17 | A/T throttle position (L3) | — | W74 | — | 0.5 | EMUPRO16-C-13 | — | — | — |
| 18 | A/T throttle position (L2) | — | W75 | — | 0.5 | EMUPRO16-D-16 | — | — | — |
| 19 | A/T throttle position (L1) | — | W76 | — | 0.5 | EMUPRO16-C-21 | — | — | — |
| 2 | A/T low-gear indicator (L) | — | W77 | — | 0.5 | EMUPRO16-C-5 | — | — | — |
| 20 | A/C request (A/C) | — | W78 | — | 0.5 | EMUPRO16-C-14 | — | — | — |
| 22 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 23 | EFI main relay power (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 25 | Stop light switch (STP) | — | W79 | — | 0.5 | EMUPRO16-C-22 | — | — | — |
| 28 | Electrical load sense (ELS) | — | W80 | — | 0.5 | EMUPRO16-C-15 | — | — | — |
| 3 | A/T power/normal mode (P) | — | W81 | — | 0.5 | EMUPRO16-C-23 | — | — | — |
| 5 | A/C clutch relay (ACMG) | — | W41 | — | 0.5 | EMUPRO16-B-2 | — | — | — |
| 6 | A/T overdrive disable 2 (OD2) | — | W70 | — | 0.5 | EMUPRO16-C-20 | — | — | — |
| 7 | A/T overdrive disable 1 (OD1) | — | W67 | — | 0.5 | EMUPRO16-C-34 | — | — | — |
| 8 | Cat temp warning light (EGW) | — | W51 | — | 0.5 | EMUPRO16-C-3 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W36 | — | 0.5 | EMUPRO16-B-15 | — | — | — |
OEM-C88
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Injector 1 (#10, cyl 1&4) | — | W33 | — | 0.5 | EMUPRO16-A-2 | — | — | — |
| 11 | A/T shift solenoid 1 (S1) | — | W43 | — | 0.5 | EMUPRO16-B-4 | — | — | — |
| 12 | Igniter feedback (IGF) | — | W65 | — | 0.5 | EMUPRO16-D-11 | — | — | — |
| 13 | Starter signal (STA) | — | W82 | — | 0.5 | EMUPRO16-C-16 | — | — | — |
| 14 | Neutral/park switch (NSW) | — | W83 | — | 0.5 | EMUPRO16-C-24 | — | — | — |
| 15 | Ignition 3 (IGT3) | — | W29 | — | 0.5 | EMUPRO16-A-28 | — | — | — |
| 16 | Ignition 2 (IGT2) | — | W28 | — | 0.5 | EMUPRO16-A-29 | — | — | — |
| 17 | A/T shift solenoid 2 (S2) | — | W45 | — | 0.5 | EMUPRO16-B-6 | — | — | — |
| 19 | Voltage feedback (VF) | — | — | — | — | — | — | — | — |
| 20 | ISC stepper coil 4 (ISCV4) | — | W48 | — | 0.5 | EMUPRO16-A-25 | — | — | — |
| 21 | ISC stepper coil 3 (ISCV3) | — | W47 | — | 0.5 | EMUPRO16-B-13 | — | — | — |
| 22 | ISC stepper coil 2 (ISCV2) | — | W46 | — | 0.5 | EMUPRO16-B-7 | — | — | — |
| 23 | ISC stepper coil 1 (ISCV1) | — | W44 | — | 0.5 | EMUPRO16-B-5 | — | — | — |
| 24 | Ignition 1 (IGT1) | — | W27 | — | 0.5 | EMUPRO16-A-30 | — | — | — |
| 26 | Ignition 4 (IGT4) | — | W30 | — | 0.5 | EMUPRO16-A-27 | — | — | — |
| 27 | A/T lock-up solenoid (S3) | — | W52 | — | 0.5 | EMUPRO16-D-13 | — | — | — |
| 28 | Power ground (E11) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Ignition 6 (IGT6) | — | W32 | — | 0.5 | EMUPRO16-A-18 | — | — | — |
| 3 | O2 heater (HT) | — | W42 | — | 0.5 | EMUPRO16-B-3 | — | — | — |
| 30 | Ignition 5 (IGT5) | — | W31 | — | 0.5 | EMUPRO16-A-26 | — | — | — |
| 31 | TRAC throttle idle switch (IDL2) | — | W84 | — | 0.5 | EMUPRO16-D-9 | — | — | — |
| 32 | TPS idle switch (IDL1) | — | W85 | — | 0.5 | EMUPRO16-D-10 | — | — | — |
| 33 | Power ground (E02) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power ground (E01) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Knock sensor 2 (KNK2, rear) | — | W26 | — | 0.5 | EMUPRO16-B-17 | — | — | — |
| 5 | Knock sensor 1 (KNK1, front) | — | W25 | — | 0.5 | EMUPRO16-B-16 | — | — | — |
| 7 | EVAP purge VSV | — | W53 | — | 0.5 | EMUPRO16-D-19 | — | — | — |
| 8 | Injector 3 (#30, cyl 2&6) | — | W35 | — | 0.5 | EMUPRO16-A-4 | — | — | — |
| 9 | Injector 2 (#20, cyl 3&5) | — | W34 | — | 0.5 | EMUPRO16-A-3 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W15 | — | 0.5 | OEM-C84-11 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-C84-17 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-C84-22 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-C84-6 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | EMUPRO16-A-20 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | EMUPRO16-B-9 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | EMUPRO16-C-29 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | EMUPRO16-D-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C86-22 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C86-23 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUPRO16-B-14 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | EMUPRO16-B-8 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-C85-16 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-C88-28 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-C88-33 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-C88-34 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | EMUPRO16-A-11 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUPRO16-A-17 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | EMUPRO16-A-19 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUPRO16-B-19 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUPRO16-C-30 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | EMUPRO16-D-18 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C84-1 | Sensor supply +5V (VCC) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-C84-10 | Cam position 1 (G1) | trigger_in | — | — | — | single_source | |
| OEM-C84-11 | Cam 1 return (G1-) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-C84-12 | TRAC throttle position (VTA2) | analog_in | EMUPRO16-C-32 | Precision analog 2 | analog_in | single_source | |
| OEM-C84-13 | O2 sensor (OX1) | lambda_nb_in | EMUPRO16-C-11 | Analog 3 | analog_in | single_source | |
| OEM-C84-14 | Intake air temperature (THA) | temp_in | EMUPRO16-C-33 | Precision analog 3 | analog_in | single_source | |
| OEM-C84-15 | OD direct-clutch speed sensor (NCO+) | digital_in | EMUPRO16-A-24 | Digital 5 (turbo) | digital_in | single_source | |
| OEM-C84-16 | Cam position 2 (G2) | trigger_in | — | — | — | single_source | |
| OEM-C84-17 | Cam 2 return (G2-) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-C84-20 | Coolant temperature (THW) | temp_in | EMUPRO16-C-18 | Analog 2 | analog_in | single_source | |
| OEM-C84-22 | Sensor ground (E2) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-C84-3 | OD direct-clutch speed sensor (NCO-) | digital_in | EMUPRO16-A-16 | Digital 6 (turbo) | digital_in | single_source | |
| OEM-C84-4 | No.2 speed sensor (SP2-) | digital_in | EMUPRO16-A-22 | Digital 3 | digital_in | single_source | |
| OEM-C84-5 | Crank position (NE) | trigger_in | EMUPRO16-A-21 | Digital 1 (crank) | trigger_in | single_source | |
| OEM-C84-6 | Crank sensor return (NE-) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-C84-7 | Throttle position (VTA1) | analog_in | EMUPRO16-C-31 | Precision analog 1 | analog_in | single_source | |
| OEM-C84-8 | Manifold pressure (PIM) | analog_in | EMUPRO16-C-10 | Analog 1 (MAP) | analog_in | single_source | |
| OEM-C84-9 | No.2 speed sensor (SP2+) | digital_in | EMUPRO16-A-14 | Digital 4 | digital_in | single_source | |
| OEM-C85-1 | Slave engine speed (NEO) | digital_in | EMUPRO16-A-23 | Digital 7 | digital_in | single_source | |
| OEM-C85-10 | Fuel pump diagnostic (DI) | digital_in | EMUPRO16-A-15 | Digital 8 | digital_in | single_source | |
| OEM-C85-11 | Slave TRAC throttle position (VTO2) | analog_out | — | — | — | single_source | |
| OEM-C85-14 | ABS active (MT only) | digital_in | EMUPRO16-D-15 | Precision analog 6 | analog_in | single_source | |
| OEM-C85-16 | Power ground (E1) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-C85-2 | EFI main relay control (M-REL) | low_side_out | EMUPRO16-B-1 | Auxiliary 1 (WBO heater) | low_side_out | single_source | |
| OEM-C85-3 | Check-engine lamp (W) | low_side_out | EMUPRO16-C-1 | Auxiliary 10 | low_side_out | single_source | |
| OEM-C85-4 | Fuel pump control (FPC) | low_side_out | EMUPRO16-C-2 | Auxiliary 11 | low_side_out | single_source | |
| OEM-C85-5 | Diagnostic test 1 (TE1) | digital_in | EMUPRO16-D-12 | Digital 10 / Analog 20 | digital_in | single_source | |
| OEM-C85-6 | Timing retard (TR) | digital_in | EMUPRO16-C-4 | Analog 7 | analog_in | single_source | |
| OEM-C85-7 | Slave throttle position (VTO1) | analog_out | — | — | — | single_source | |
| OEM-C86-1 | Diagnostic test terminal (TT) | digital_in | EMUPRO16-D-22 | Precision analog 7 | analog_in | single_source | |
| OEM-C86-10 | A/T 2nd-gear indicator (2) | digital_in | EMUPRO16-C-12 | Analog 5 | analog_in | single_source | |
| OEM-C86-11 | Diagnostic test 2 (TE2) | digital_in | EMUPRO16-D-21 | Precision analog 5 | analog_in | single_source | |
| OEM-C86-12 | No.1 speed sensor (SP1) | digital_in | EMUPRO16-A-13 | Digital 2 | digital_in | single_source | |
| OEM-C86-13 | Cat temperature sensor (CCO) | temp_in | EMUPRO16-C-19 | Analog 4 | analog_in | single_source | |
| OEM-C86-14 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-C86-17 | A/T throttle position (L3) | digital_in | EMUPRO16-C-13 | Analog 8 | analog_in | single_source | |
| OEM-C86-18 | A/T throttle position (L2) | digital_in | EMUPRO16-D-16 | Precision analog 8 | analog_in | single_source | |
| OEM-C86-19 | A/T throttle position (L1) | digital_in | EMUPRO16-C-21 | Analog 9 (2k2 pull) | analog_in | single_source | |
| OEM-C86-2 | A/T low-gear indicator (L) | digital_in | EMUPRO16-C-5 | Analog 10 (2k2 pull) | analog_in | single_source | |
| OEM-C86-20 | A/C request (A/C) | digital_in | EMUPRO16-C-14 | Analog 11 (2k2 pull) | analog_in | single_source | |
| OEM-C86-22 | EFI main relay power (+B) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-C86-23 | EFI main relay power (+B1) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-C86-25 | Stop light switch (STP) | digital_in | EMUPRO16-C-22 | Analog 12 (2k2 pull) | analog_in | single_source | |
| OEM-C86-28 | Electrical load sense (ELS) | digital_in | EMUPRO16-C-15 | Analog 13 (1k pull) | analog_in | single_source | |
| OEM-C86-3 | A/T power/normal mode (P) | digital_in | EMUPRO16-C-23 | Analog 14 (1k pull) | analog_in | single_source | |
| OEM-C86-5 | A/C clutch relay (ACMG) | low_side_out | EMUPRO16-B-2 | Auxiliary 2 (WBO heater) | low_side_out | single_source | |
| OEM-C86-6 | A/T overdrive disable 2 (OD2) | digital_in | EMUPRO16-C-20 | Analog 6 | analog_in | single_source | |
| OEM-C86-7 | A/T overdrive disable 1 (OD1) | digital_in | EMUPRO16-C-34 | Precision analog 4 | analog_in | single_source | |
| OEM-C86-8 | Cat temp warning light (EGW) | low_side_out | EMUPRO16-C-3 | Auxiliary 12 | low_side_out | single_source | |
| OEM-C86-9 | Ignition switch (IGSW) | digital_in | EMUPRO16-B-15 | +12V switched | digital_in | single_source | |
| OEM-C88-10 | Injector 1 (#10, cyl 1&4) | injector_out | EMUPRO16-A-2 | Injector 1 | injector_out | single_source | |
| OEM-C88-11 | A/T shift solenoid 1 (S1) | low_side_out | EMUPRO16-B-4 | Auxiliary 4 (WBO heater) | low_side_out | single_source | |
| OEM-C88-12 | Igniter feedback (IGF) | digital_in | EMUPRO16-D-11 | Digital 9 / Analog 19 | digital_in | single_source | |
| OEM-C88-13 | Starter signal (STA) | digital_in | EMUPRO16-C-16 | Analog 15 (330R pull) | analog_in | single_source | |
| OEM-C88-14 | Neutral/park switch (NSW) | digital_in | EMUPRO16-C-24 | Analog 16 (100R pull) | analog_in | single_source | |
| OEM-C88-15 | Ignition 3 (IGT3) | ignition_out | EMUPRO16-A-28 | Ignition 3 | ignition_out | single_source | |
| OEM-C88-16 | Ignition 2 (IGT2) | ignition_out | EMUPRO16-A-29 | Ignition 2 | ignition_out | single_source | |
| OEM-C88-17 | A/T shift solenoid 2 (S2) | low_side_out | EMUPRO16-B-6 | Auxiliary 6 | low_side_out | single_source | |
| OEM-C88-19 | Voltage feedback (VF) | analog_out | — | — | — | single_source | |
| OEM-C88-20 | ISC stepper coil 4 (ISCV4) | low_side_out | EMUPRO16-A-25 | Auxiliary 9 | low_side_out | single_source | |
| OEM-C88-21 | ISC stepper coil 3 (ISCV3) | low_side_out | EMUPRO16-B-13 | Auxiliary 8 | low_side_out | single_source | |
| OEM-C88-22 | ISC stepper coil 2 (ISCV2) | low_side_out | EMUPRO16-B-7 | Auxiliary 7 | low_side_out | single_source | |
| OEM-C88-23 | ISC stepper coil 1 (ISCV1) | low_side_out | EMUPRO16-B-5 | Auxiliary 5 | low_side_out | single_source | |
| OEM-C88-24 | Ignition 1 (IGT1) | ignition_out | EMUPRO16-A-30 | Ignition 1 | ignition_out | single_source | |
| OEM-C88-26 | Ignition 4 (IGT4) | ignition_out | EMUPRO16-A-27 | Ignition 4 | ignition_out | single_source | |
| OEM-C88-27 | A/T lock-up solenoid (S3) | low_side_out | EMUPRO16-D-13 | Auxiliary 13 | low_side_out | single_source | |
| OEM-C88-28 | Power ground (E11) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-C88-29 | Ignition 6 (IGT6) | ignition_out | EMUPRO16-A-18 | Ignition 6 | ignition_out | single_source | |
| OEM-C88-3 | O2 heater (HT) | low_side_out | EMUPRO16-B-3 | Auxiliary 3 (WBO heater) | low_side_out | single_source | |
| OEM-C88-30 | Ignition 5 (IGT5) | ignition_out | EMUPRO16-A-26 | Ignition 5 | ignition_out | single_source | |
| OEM-C88-31 | TRAC throttle idle switch (IDL2) | digital_in | EMUPRO16-D-9 | Analog 17 | analog_in | single_source | |
| OEM-C88-32 | TPS idle switch (IDL1) | digital_in | EMUPRO16-D-10 | Analog 18 | analog_in | single_source | |
| OEM-C88-33 | Power ground (E02) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-C88-34 | Power ground (E01) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-C88-4 | Knock sensor 2 (KNK2, rear) | knock_in | EMUPRO16-B-17 | Knock sensor 2 | knock_in | single_source | |
| OEM-C88-5 | Knock sensor 1 (KNK1, front) | knock_in | EMUPRO16-B-16 | Knock sensor 1 | knock_in | single_source | |
| OEM-C88-7 | EVAP purge VSV | low_side_out | EMUPRO16-D-19 | Auxiliary 14 | low_side_out | single_source | |
| OEM-C88-8 | Injector 3 (#30, cyl 2&6) | injector_out | EMUPRO16-A-4 | Injector 3 | injector_out | single_source | |
| OEM-C88-9 | Injector 2 (#20, cyl 3&5) | injector_out | EMUPRO16-A-3 | Injector 2 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B1) | — | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | no route | +12V supply | — | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | no route | +12V supply | — | |
| W5 | OEM-C85-16 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W6 | OEM-C88-28 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W7 | OEM-C88-33 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W8 | OEM-C88-34 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W9 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | no route | Power GND | — | |
| W10 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | no route | Power GND | — | |
| W11 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | no route | Power GND | — | |
| W12 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | no route | Power GND | — | |
| W13 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | no route | Power GND | — | |
| W14 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | no route | Power GND | — | |
| W15 | OEM-C84-11 | SP-0V-1 | 0.5 | no route | Cam 1 return (G1-) | — | |
| W16 | OEM-C84-17 | SP-0V-1 | 0.5 | no route | Cam 2 return (G2-) | — | |
| W17 | OEM-C84-22 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W18 | OEM-C84-6 | SP-0V-1 | 0.5 | no route | Crank sensor return (NE-) | — | |
| W19 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | no route | Digital GND | — | |
| W20 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | no route | Digital GND (flash drive) | — | |
| W21 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | no route | Analog GND | — | |
| W22 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | no route | Analog GND | — | |
| W23 | OEM-C84-1 | EMUPRO16-A-12 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W24 | OEM-C84-5 | EMUPRO16-A-21 | 0.5 | no route | Crank position (NE) | — | |
| W25 | OEM-C88-5 | EMUPRO16-B-16 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W26 | OEM-C88-4 | EMUPRO16-B-17 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W27 | OEM-C88-24 | EMUPRO16-A-30 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W28 | OEM-C88-16 | EMUPRO16-A-29 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W29 | OEM-C88-15 | EMUPRO16-A-28 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W30 | OEM-C88-26 | EMUPRO16-A-27 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W31 | OEM-C88-30 | EMUPRO16-A-26 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W32 | OEM-C88-29 | EMUPRO16-A-18 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W33 | OEM-C88-10 | EMUPRO16-A-2 | 0.5 | no route | Injector 1 (#10, cyl 1&4) | — | |
| W34 | OEM-C88-9 | EMUPRO16-A-3 | 0.5 | no route | Injector 2 (#20, cyl 3&5) | — | |
| W35 | OEM-C88-8 | EMUPRO16-A-4 | 0.5 | no route | Injector 3 (#30, cyl 2&6) | — | |
| W36 | OEM-C86-9 | EMUPRO16-B-15 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W37 | OEM-C84-8 | EMUPRO16-C-10 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W38 | OEM-C84-7 | EMUPRO16-C-31 | 0.5 | no route | Throttle position (VTA1) | — | |
| W39 | OEM-C84-20 | EMUPRO16-C-18 | 0.5 | no route | Coolant temperature (THW) | — | |
| W40 | OEM-C85-2 | EMUPRO16-B-1 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W41 | OEM-C86-5 | EMUPRO16-B-2 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W42 | OEM-C88-3 | EMUPRO16-B-3 | 0.5 | no route | O2 heater (HT) | — | |
| W43 | OEM-C88-11 | EMUPRO16-B-4 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W44 | OEM-C88-23 | EMUPRO16-B-5 | 0.5 | no route | ISC stepper coil 1 (ISCV1) | — | |
| W45 | OEM-C88-17 | EMUPRO16-B-6 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W46 | OEM-C88-22 | EMUPRO16-B-7 | 0.5 | no route | ISC stepper coil 2 (ISCV2) | — | |
| W47 | OEM-C88-21 | EMUPRO16-B-13 | 0.5 | no route | ISC stepper coil 3 (ISCV3) | — | |
| W48 | OEM-C88-20 | EMUPRO16-A-25 | 0.5 | no route | ISC stepper coil 4 (ISCV4) | — | |
| W49 | OEM-C85-3 | EMUPRO16-C-1 | 0.5 | no route | Check-engine lamp (W) | — | |
| W50 | OEM-C85-4 | EMUPRO16-C-2 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W51 | OEM-C86-8 | EMUPRO16-C-3 | 0.5 | no route | Cat temp warning light (EGW) | — | |
| W52 | OEM-C88-27 | EMUPRO16-D-13 | 0.5 | no route | A/T lock-up solenoid (S3) | — | |
| W53 | OEM-C88-7 | EMUPRO16-D-19 | 0.5 | no route | EVAP purge VSV | — | |
| W54 | OEM-C84-12 | EMUPRO16-C-32 | 0.5 | no route | TRAC throttle position (VTA2) | — | |
| W55 | OEM-C84-13 | EMUPRO16-C-11 | 0.5 | no route | O2 sensor (OX1) | — | |
| W56 | OEM-C84-14 | EMUPRO16-C-33 | 0.5 | no route | Intake air temperature (THA) | — | |
| W57 | OEM-C86-13 | EMUPRO16-C-19 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W58 | OEM-C86-12 | EMUPRO16-A-13 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W59 | OEM-C84-4 | EMUPRO16-A-22 | 0.5 | no route | No.2 speed sensor (SP2-) | — | |
| W60 | OEM-C84-9 | EMUPRO16-A-14 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W61 | OEM-C84-15 | EMUPRO16-A-24 | 0.5 | no route | OD direct-clutch speed sensor (NCO+) | — | |
| W62 | OEM-C84-3 | EMUPRO16-A-16 | 0.5 | no route | OD direct-clutch speed sensor (NCO-) | — | |
| W63 | OEM-C85-1 | EMUPRO16-A-23 | 0.5 | no route | Slave engine speed (NEO) | — | |
| W64 | OEM-C85-10 | EMUPRO16-A-15 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W65 | OEM-C88-12 | EMUPRO16-D-11 | 0.5 | no route | Igniter feedback (IGF) | — | |
| W66 | OEM-C85-5 | EMUPRO16-D-12 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W67 | OEM-C86-7 | EMUPRO16-C-34 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W68 | OEM-C86-10 | EMUPRO16-C-12 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W69 | OEM-C86-11 | EMUPRO16-D-21 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W70 | OEM-C86-6 | EMUPRO16-C-20 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W71 | OEM-C85-14 | EMUPRO16-D-15 | 0.5 | no route | ABS active (MT only) | — | |
| W72 | OEM-C85-6 | EMUPRO16-C-4 | 0.5 | no route | Timing retard (TR) | — | |
| W73 | OEM-C86-1 | EMUPRO16-D-22 | 0.5 | no route | Diagnostic test terminal (TT) | — | |
| W74 | OEM-C86-17 | EMUPRO16-C-13 | 0.5 | no route | A/T throttle position (L3) | — | |
| W75 | OEM-C86-18 | EMUPRO16-D-16 | 0.5 | no route | A/T throttle position (L2) | — | |
| W76 | OEM-C86-19 | EMUPRO16-C-21 | 0.5 | no route | A/T throttle position (L1) | — | |
| W77 | OEM-C86-2 | EMUPRO16-C-5 | 0.5 | no route | A/T low-gear indicator (L) | — | |
| W78 | OEM-C86-20 | EMUPRO16-C-14 | 0.5 | no route | A/C request (A/C) | — | |
| W79 | OEM-C86-25 | EMUPRO16-C-22 | 0.5 | no route | Stop light switch (STP) | — | |
| W80 | OEM-C86-28 | EMUPRO16-C-15 | 0.5 | no route | Electrical load sense (ELS) | — | |
| W81 | OEM-C86-3 | EMUPRO16-C-23 | 0.5 | no route | A/T power/normal mode (P) | — | |
| W82 | OEM-C88-13 | EMUPRO16-C-16 | 0.5 | no route | Starter signal (STA) | — | |
| W83 | OEM-C88-14 | EMUPRO16-C-24 | 0.5 | no route | Neutral/park switch (NSW) | — | |
| W84 | OEM-C88-31 | EMUPRO16-D-9 | 0.5 | no route | TRAC throttle idle switch (IDL2) | — | |
| W85 | OEM-C88-32 | EMUPRO16-D-10 | 0.5 | no route | TPS idle switch (IDL1) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1473416-1 | TE | Superseal 1.0 26-way plug, Key 3 | 1.000 | ea |
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 75.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (25)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-C84-10 | Required OEM function "Cam position 1 (G1)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C84-16 | Required OEM function "Cam position 2 (G2)" (trigger_in) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-C85-14 ↔ EMUPRO16-D-15 | OEM-C85-14 "ABS active (MT only)" [digital_in] is wired to EMUPRO16-D-15 "Precision analog 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-6 ↔ EMUPRO16-C-4 | OEM-C85-6 "Timing retard (TR)" [digital_in] is wired to EMUPRO16-C-4 "Analog 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-1 ↔ EMUPRO16-D-22 | OEM-C86-1 "Diagnostic test terminal (TT)" [digital_in] is wired to EMUPRO16-D-22 "Precision analog 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-10 ↔ EMUPRO16-C-12 | OEM-C86-10 "A/T 2nd-gear indicator (2)" [digital_in] is wired to EMUPRO16-C-12 "Analog 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-11 ↔ EMUPRO16-D-21 | OEM-C86-11 "Diagnostic test 2 (TE2)" [digital_in] is wired to EMUPRO16-D-21 "Precision analog 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-17 ↔ EMUPRO16-C-13 | OEM-C86-17 "A/T throttle position (L3)" [digital_in] is wired to EMUPRO16-C-13 "Analog 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-18 ↔ EMUPRO16-D-16 | OEM-C86-18 "A/T throttle position (L2)" [digital_in] is wired to EMUPRO16-D-16 "Precision analog 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-19 ↔ EMUPRO16-C-21 | OEM-C86-19 "A/T throttle position (L1)" [digital_in] is wired to EMUPRO16-C-21 "Analog 9 (2k2 pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-2 ↔ EMUPRO16-C-5 | OEM-C86-2 "A/T low-gear indicator (L)" [digital_in] is wired to EMUPRO16-C-5 "Analog 10 (2k2 pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-20 ↔ EMUPRO16-C-14 | OEM-C86-20 "A/C request (A/C)" [digital_in] is wired to EMUPRO16-C-14 "Analog 11 (2k2 pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-25 ↔ EMUPRO16-C-22 | OEM-C86-25 "Stop light switch (STP)" [digital_in] is wired to EMUPRO16-C-22 "Analog 12 (2k2 pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-28 ↔ EMUPRO16-C-15 | OEM-C86-28 "Electrical load sense (ELS)" [digital_in] is wired to EMUPRO16-C-15 "Analog 13 (1k pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-3 ↔ EMUPRO16-C-23 | OEM-C86-3 "A/T power/normal mode (P)" [digital_in] is wired to EMUPRO16-C-23 "Analog 14 (1k pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-6 ↔ EMUPRO16-C-20 | OEM-C86-6 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to EMUPRO16-C-20 "Analog 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-7 ↔ EMUPRO16-C-34 | OEM-C86-7 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to EMUPRO16-C-34 "Precision analog 4" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C88-13 ↔ EMUPRO16-C-16 | OEM-C88-13 "Starter signal (STA)" [digital_in] is wired to EMUPRO16-C-16 "Analog 15 (330R pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C88-14 ↔ EMUPRO16-C-24 | OEM-C88-14 "Neutral/park switch (NSW)" [digital_in] is wired to EMUPRO16-C-24 "Analog 16 (100R pull)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C88-31 ↔ EMUPRO16-D-9 | OEM-C88-31 "TRAC throttle idle switch (IDL2)" [digital_in] is wired to EMUPRO16-D-9 "Analog 17" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C88-32 ↔ EMUPRO16-D-10 | OEM-C88-32 "TPS idle switch (IDL1)" [digital_in] is wired to EMUPRO16-D-10 "Analog 18" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-C84-14 ↔ EMUPRO16-C-33 | OEM-C84-14 "Intake air temperature (THA)" [temp_in] is wired to EMUPRO16-C-33 "Precision analog 3" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C84-20 ↔ EMUPRO16-C-18 | OEM-C84-20 "Coolant temperature (THW)" [temp_in] is wired to EMUPRO16-C-18 "Analog 2" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C86-13 ↔ EMUPRO16-C-19 | OEM-C86-13 "Cat temperature sensor (CCO)" [temp_in] is wired to EMUPRO16-C-19 "Analog 4" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 3 optional OEM pins are not mapped: OEM-C85-11 Slave TRAC throttle position (VTO2); OEM-C85-7 Slave throttle position (VTO1); OEM-C88-19 Voltage feedback (VF) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-C86-14 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-C84 10: Cam position 1 (G1): no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 - OEM-C84 16: Cam position 2 (G2): no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 Not wired: - OEM-C86 14: Battery constant (BATT): ECUMASTER EMU PRO 16 has no battery-constant input; not needed - OEM-C85 11: Slave TRAC throttle position (VTO2): no free analog_out on ECUMASTER EMU PRO 16 - OEM-C85 7: Slave throttle position (VTO1): no free analog_out on ECUMASTER EMU PRO 16 - OEM-C88 19: Voltage feedback (VF): no free analog_out on ECUMASTER EMU PRO 16
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER EMU PRO 16 — pinout (Connectors A/B/C/D) | https://www.ecumaster.com/files/EMU_PRO/EMU_PRO_16_Pinout_v1.0.pdf | archive | 2026-10-05 | 72799bed63fb |
| 2 | community_copy | wilbo666: 1JZ-GTE pinout (JZZ30 Soarer page, shared 1JZ-GTE engine/ECU) | http://wilbo666.pbworks.com/w/page/47216384/1JZ-GTE%20JZZ30%20Soarer | — | — | — |