Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) → Link G5 Voodoo Pro V1 (auto)
Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 8: read the Findings page before cutting any wire |
| Size of the job | 60 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C85-16 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C88-28 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-C88-33 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-C88-34 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C84-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C84-5 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C84-10 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C84-16 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-C88-5 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-C88-4 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-C88-24 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-C88-16 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-C88-15 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-C88-26 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-C88-30 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-C88-29 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-C88-10 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-C88-9 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-C88-8 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-C86-9 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-C84-8 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-C84-7 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-C84-20 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-C85-2 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-C86-5 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-C88-3 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-C88-11 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C88-23 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C88-17 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-C88-22 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C88-21 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-C88-20 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C85-3 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C85-4 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C86-8 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C88-27 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C88-7 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C84-12 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C84-13 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C84-14 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C86-13 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C86-12 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-C84-4 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C84-9 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C84-15 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C84-3 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C85-1 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C85-10 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C88-12 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C85-5 | G5VOODOOPROV-B-B27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C86-7 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C86-10 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C86-11 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C86-6 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C85-14 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C85-6 | G5VOODOOPROV-B-B31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C86-1 | G5VOODOOPROV-B-B32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C86-17 | G5VOODOOPROV-E-E12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C86-18 | G5VOODOOPROV-E-E13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C86-19 | G5VOODOOPROV-B-B14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-C85-16 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W34 | — | 0.5 | OEM-C85-4 | — | — | — |
| A10 | Ignition 4 | — | W14 | — | 0.5 | OEM-C88-26 | — | — | — |
| A11 | Ignition 3 | — | W13 | — | 0.5 | OEM-C88-15 | — | — | — |
| A12 | Ignition 2 | — | W12 | — | 0.5 | OEM-C88-16 | — | — | — |
| A13 | Ignition 1 | — | W11 | — | 0.5 | OEM-C88-24 | — | — | — |
| A14 | Analogue Volt 4 | — | W39 | — | 0.5 | OEM-C84-13 | — | — | — |
| A15 | Analogue Temp 1 | — | W23 | — | 0.5 | OEM-C84-20 | — | — | — |
| A16 | Analogue Temp 2 | — | W40 | — | 0.5 | OEM-C84-14 | — | — | — |
| A17 | Analogue Volt 1 | — | W21 | — | 0.5 | OEM-C84-8 | — | — | — |
| A18 | Aux 4 | — | W28 | — | 0.5 | OEM-C88-23 | — | — | — |
| A19 | Aux 3 | — | W27 | — | 0.5 | OEM-C88-11 | — | — | — |
| A2 | Injection 3 | — | W19 | — | 0.5 | OEM-C88-8 | — | — | — |
| A20 | Aux 2 | — | W25 | — | 0.5 | OEM-C86-5 | — | — | — |
| A21 | Aux 1 | — | W24 | — | 0.5 | OEM-C85-2 | — | — | — |
| A22 | Analogue Volt 2 | — | W22 | — | 0.5 | OEM-C84-7 | — | — | — |
| A23 | Digital Input 3 | — | W43 | — | 0.5 | OEM-C84-4 | — | — | — |
| A26 | Aux 8 | — | W33 | — | 0.5 | OEM-C85-3 | — | — | — |
| A27 | Aux 7 | — | W32 | — | 0.5 | OEM-C88-20 | — | — | — |
| A28 | Aux 6 | — | W31 | — | 0.5 | OEM-C88-21 | — | — | — |
| A29 | Aux 5 | — | W30 | — | 0.5 | OEM-C88-22 | — | — | — |
| A3 | Injection 2 | — | W18 | — | 0.5 | OEM-C88-9 | — | — | — |
| A30 | Digital Input 1 | — | W8 | — | 0.5 | OEM-C84-16 | — | — | — |
| A31 | Digital Input 2 | — | W42 | — | 0.5 | OEM-C86-12 | — | — | — |
| A32 | +5V Out | — | W5 | — | 0.5 | OEM-C84-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W38 | — | 0.5 | OEM-C84-12 | — | — | — |
| A4 | Injection 1 | — | W17 | — | 0.5 | OEM-C88-10 | — | — | — |
| A6 | Ignition Switch | — | W20 | — | 0.5 | OEM-C86-9 | — | — | — |
| A8 | Trigger 1 | — | W6 | — | 0.5 | OEM-C84-5 | — | — | — |
| A9 | Trigger 2 | — | W7 | — | 0.5 | OEM-C84-10 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | — | — | — | — | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W16 | — | 0.5 | OEM-C88-29 | — | — | — |
| B13 | Ignition 5 | — | W15 | — | 0.5 | OEM-C88-30 | — | — | — |
| B14 | Analogue Volt 14 | — | W60 | — | 0.5 | OEM-C86-19 | — | — | — |
| B15 | Analogue Volt 6 | — | W52 | — | 0.5 | OEM-C86-10 | — | — | — |
| B16 | Analogue Volt 7 | — | W53 | — | 0.5 | OEM-C86-11 | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W46 | — | 0.5 | OEM-C84-3 | — | — | — |
| B2 | Injection 7 | — | W37 | — | 0.5 | OEM-C88-7 | — | — | — |
| B20 | Digital Input 5 | — | W45 | — | 0.5 | OEM-C84-15 | — | — | — |
| B21 | Digital Input 4 | — | W44 | — | 0.5 | OEM-C84-9 | — | — | — |
| B23 | Analogue Volt 8 | — | W54 | — | 0.5 | OEM-C86-6 | — | — | — |
| B24 | Analogue Volt 9 | — | W55 | — | 0.5 | OEM-C85-14 | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | W50 | — | 0.5 | OEM-C85-5 | — | — | — |
| B28 | Digital Input 9 | — | W49 | — | 0.5 | OEM-C88-12 | — | — | — |
| B29 | Digital Input 8 | — | W48 | — | 0.5 | OEM-C85-10 | — | — | — |
| B3 | Injection 6 | — | W36 | — | 0.5 | OEM-C88-27 | — | — | — |
| B30 | Digital Input 7 | — | W47 | — | 0.5 | OEM-C85-1 | — | — | — |
| B31 | Analogue Volt 10 | — | W56 | — | 0.5 | OEM-C85-6 | — | — | — |
| B32 | Analogue Volt 11 | — | W57 | — | 0.5 | OEM-C86-1 | — | — | — |
| B33 | Analogue Volt 5 | — | W51 | — | 0.5 | OEM-C86-7 | — | — | — |
| B4 | Injection 5 | — | W35 | — | 0.5 | OEM-C86-8 | — | — | — |
| B6 | Analogue Temp 3 | — | W41 | — | 0.5 | OEM-C86-13 | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W10 | — | 0.5 | OEM-C88-4 | — | — | — |
| B9 | Knock 1 | — | W9 | — | 0.5 | OEM-C88-5 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | W58 | — | 0.5 | OEM-C86-17 | — | — | — |
| E13 | Analogue Volt 13 | — | W59 | — | 0.5 | OEM-C86-18 | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W26 | — | 0.5 | OEM-C88-3 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W29 | — | 0.5 | OEM-C88-17 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | — | — | — | — | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-C84
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor supply +5V (VCC) | — | W5 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 10 | Cam position 1 (G1) | — | W7 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 11 | Cam 1 return (G1-) | — | — | — | — | — | — | — | — |
| 12 | TRAC throttle position (VTA2) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 13 | O2 sensor (OX1) | — | W39 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 14 | Intake air temperature (THA) | — | W40 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 15 | OD direct-clutch speed sensor (NCO+) | — | W45 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 16 | Cam position 2 (G2) | — | W8 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 17 | Cam 2 return (G2-) | — | — | — | — | — | — | — | — |
| 20 | Coolant temperature (THW) | — | W23 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 22 | Sensor ground (E2) | — | — | — | — | — | — | — | — |
| 3 | OD direct-clutch speed sensor (NCO-) | — | W46 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 4 | No.2 speed sensor (SP2-) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 5 | Crank position (NE) | — | W6 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 6 | Crank sensor return (NE-) | — | — | — | — | — | — | — | — |
| 7 | Throttle position (VTA1) | — | W22 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 8 | Manifold pressure (PIM) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 9 | No.2 speed sensor (SP2+) | — | W44 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
OEM-C85
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Slave engine speed (NEO) | — | W47 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 10 | Fuel pump diagnostic (DI) | — | W48 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 11 | Slave TRAC throttle position (VTO2) | — | — | — | — | — | — | — | — |
| 14 | ABS active (MT only) | — | W55 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 16 | Power ground (E1) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | EFI main relay control (M-REL) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 3 | Check-engine lamp (W) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 4 | Fuel pump control (FPC) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 5 | Diagnostic test 1 (TE1) | — | W50 | — | 0.5 | G5VOODOOPROV-B-B27 | — | — | — |
| 6 | Timing retard (TR) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B31 | — | — | — |
| 7 | Slave throttle position (VTO1) | — | — | — | — | — | — | — | — |
OEM-C86
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Diagnostic test terminal (TT) | — | W57 | — | 0.5 | G5VOODOOPROV-B-B32 | — | — | — |
| 10 | A/T 2nd-gear indicator (2) | — | W52 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 11 | Diagnostic test 2 (TE2) | — | W53 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 12 | No.1 speed sensor (SP1) | — | W42 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 13 | Cat temperature sensor (CCO) | — | W41 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 14 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 17 | A/T throttle position (L3) | — | W58 | — | 0.5 | G5VOODOOPROV-E-E12 | — | — | — |
| 18 | A/T throttle position (L2) | — | W59 | — | 0.5 | G5VOODOOPROV-E-E13 | — | — | — |
| 19 | A/T throttle position (L1) | — | W60 | — | 0.5 | G5VOODOOPROV-B-B14 | — | — | — |
| 2 | A/T low-gear indicator (L) | — | — | — | — | — | — | — | — |
| 20 | A/C request (A/C) | — | — | — | — | — | — | — | — |
| 22 | EFI main relay power (+B) | — | — | — | — | — | — | — | — |
| 23 | EFI main relay power (+B1) | — | — | — | — | — | — | — | — |
| 25 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 28 | Electrical load sense (ELS) | — | — | — | — | — | — | — | — |
| 3 | A/T power/normal mode (P) | — | — | — | — | — | — | — | — |
| 5 | A/C clutch relay (ACMG) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 6 | A/T overdrive disable 2 (OD2) | — | W54 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
| 7 | A/T overdrive disable 1 (OD1) | — | W51 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| 8 | Cat temp warning light (EGW) | — | W35 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W20 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
OEM-C88
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Injector 1 (#10, cyl 1&4) | — | W17 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 11 | A/T shift solenoid 1 (S1) | — | W27 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 12 | Igniter feedback (IGF) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 13 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 14 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 15 | Ignition 3 (IGT3) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 16 | Ignition 2 (IGT2) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 17 | A/T shift solenoid 2 (S2) | — | W29 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 19 | Voltage feedback (VF) | — | — | — | — | — | — | — | — |
| 20 | ISC stepper coil 4 (ISCV4) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 21 | ISC stepper coil 3 (ISCV3) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 22 | ISC stepper coil 2 (ISCV2) | — | W30 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 23 | ISC stepper coil 1 (ISCV1) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 24 | Ignition 1 (IGT1) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 26 | Ignition 4 (IGT4) | — | W14 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 27 | A/T lock-up solenoid (S3) | — | W36 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 28 | Power ground (E11) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Ignition 6 (IGT6) | — | W16 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 3 | O2 heater (HT) | — | W26 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 30 | Ignition 5 (IGT5) | — | W15 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 31 | TRAC throttle idle switch (IDL2) | — | — | — | — | — | — | — | — |
| 32 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 33 | Power ground (E02) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power ground (E01) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Knock sensor 2 (KNK2, rear) | — | W10 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 5 | Knock sensor 1 (KNK1, front) | — | W9 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 7 | EVAP purge VSV | — | W37 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 8 | Injector 3 (#30, cyl 2&6) | — | W19 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 9 | Injector 2 (#20, cyl 3&5) | — | W18 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C85-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C88-28 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-C88-33 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-C88-34 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C84-1 | Sensor supply +5V (VCC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-C84-10 | Cam position 1 (G1) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-C84-11 | Cam 1 return (G1-) | sensor_ground | — | — | — | single_source | |
| OEM-C84-12 | TRAC throttle position (VTA2) | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-C84-13 | O2 sensor (OX1) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | single_source | |
| OEM-C84-14 | Intake air temperature (THA) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-C84-15 | OD direct-clutch speed sensor (NCO+) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-C84-16 | Cam position 2 (G2) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-C84-17 | Cam 2 return (G2-) | sensor_ground | — | — | — | single_source | |
| OEM-C84-20 | Coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-C84-22 | Sensor ground (E2) | sensor_ground | — | — | — | single_source | |
| OEM-C84-3 | OD direct-clutch speed sensor (NCO-) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-C84-4 | No.2 speed sensor (SP2-) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-C84-5 | Crank position (NE) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-C84-6 | Crank sensor return (NE-) | sensor_ground | — | — | — | single_source | |
| OEM-C84-7 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | single_source | |
| OEM-C84-8 | Manifold pressure (PIM) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-C84-9 | No.2 speed sensor (SP2+) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-C85-1 | Slave engine speed (NEO) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-C85-10 | Fuel pump diagnostic (DI) | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-C85-11 | Slave TRAC throttle position (VTO2) | analog_out | — | — | — | single_source | |
| OEM-C85-14 | ABS active (MT only) | digital_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | single_source | |
| OEM-C85-16 | Power ground (E1) | ground | — | — | — | single_source | |
| OEM-C85-2 | EFI main relay control (M-REL) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-C85-3 | Check-engine lamp (W) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-C85-4 | Fuel pump control (FPC) | low_side_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-C85-5 | Diagnostic test 1 (TE1) | digital_in | G5VOODOOPROV-B-B27 | Digital Input 10 | digital_in | single_source | |
| OEM-C85-6 | Timing retard (TR) | digital_in | G5VOODOOPROV-B-B31 | Analogue Volt 10 | analog_in | single_source | |
| OEM-C85-7 | Slave throttle position (VTO1) | analog_out | — | — | — | single_source | |
| OEM-C86-1 | Diagnostic test terminal (TT) | digital_in | G5VOODOOPROV-B-B32 | Analogue Volt 11 | analog_in | single_source | |
| OEM-C86-10 | A/T 2nd-gear indicator (2) | digital_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-C86-11 | Diagnostic test 2 (TE2) | digital_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-C86-12 | No.1 speed sensor (SP1) | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-C86-13 | Cat temperature sensor (CCO) | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | single_source | |
| OEM-C86-14 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-C86-17 | A/T throttle position (L3) | digital_in | G5VOODOOPROV-E-E12 | Analogue Volt 12 | analog_in | single_source | |
| OEM-C86-18 | A/T throttle position (L2) | digital_in | G5VOODOOPROV-E-E13 | Analogue Volt 13 | analog_in | single_source | |
| OEM-C86-19 | A/T throttle position (L1) | digital_in | G5VOODOOPROV-B-B14 | Analogue Volt 14 | analog_in | single_source | |
| OEM-C86-2 | A/T low-gear indicator (L) | digital_in | — | — | — | single_source | |
| OEM-C86-20 | A/C request (A/C) | digital_in | — | — | — | single_source | |
| OEM-C86-22 | EFI main relay power (+B) | power_in | — | — | — | single_source | |
| OEM-C86-23 | EFI main relay power (+B1) | power_in | — | — | — | single_source | |
| OEM-C86-25 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-C86-28 | Electrical load sense (ELS) | digital_in | — | — | — | single_source | |
| OEM-C86-3 | A/T power/normal mode (P) | digital_in | — | — | — | single_source | |
| OEM-C86-5 | A/C clutch relay (ACMG) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-C86-6 | A/T overdrive disable 2 (OD2) | digital_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | single_source | |
| OEM-C86-7 | A/T overdrive disable 1 (OD1) | digital_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | single_source | |
| OEM-C86-8 | Cat temp warning light (EGW) | low_side_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-C86-9 | Ignition switch (IGSW) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | single_source | |
| OEM-C88-10 | Injector 1 (#10, cyl 1&4) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-C88-11 | A/T shift solenoid 1 (S1) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-C88-12 | Igniter feedback (IGF) | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-C88-13 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-C88-14 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-C88-15 | Ignition 3 (IGT3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | single_source | |
| OEM-C88-16 | Ignition 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | single_source | |
| OEM-C88-17 | A/T shift solenoid 2 (S2) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-C88-19 | Voltage feedback (VF) | analog_out | — | — | — | single_source | |
| OEM-C88-20 | ISC stepper coil 4 (ISCV4) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-C88-21 | ISC stepper coil 3 (ISCV3) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-C88-22 | ISC stepper coil 2 (ISCV2) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source | |
| OEM-C88-23 | ISC stepper coil 1 (ISCV1) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-C88-24 | Ignition 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-C88-26 | Ignition 4 (IGT4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | single_source | |
| OEM-C88-27 | A/T lock-up solenoid (S3) | low_side_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-C88-28 | Power ground (E11) | ground | — | — | — | single_source | |
| OEM-C88-29 | Ignition 6 (IGT6) | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | single_source | |
| OEM-C88-3 | O2 heater (HT) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-C88-30 | Ignition 5 (IGT5) | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | single_source | |
| OEM-C88-31 | TRAC throttle idle switch (IDL2) | digital_in | — | — | — | single_source | |
| OEM-C88-32 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-C88-33 | Power ground (E02) | ground | — | — | — | single_source | |
| OEM-C88-34 | Power ground (E01) | ground | — | — | — | single_source | |
| OEM-C88-4 | Knock sensor 2 (KNK2, rear) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | single_source | |
| OEM-C88-5 | Knock sensor 1 (KNK1, front) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-C88-7 | EVAP purge VSV | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-C88-8 | Injector 3 (#30, cyl 2&6) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-C88-9 | Injector 2 (#20, cyl 3&5) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C85-16 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W2 | OEM-C88-28 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W3 | OEM-C88-33 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W4 | OEM-C88-34 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W5 | OEM-C84-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W6 | OEM-C84-5 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position (NE) | — | |
| W7 | OEM-C84-10 | G5VOODOOPROV-A-A9 | 0.5 | no route | Cam position 1 (G1) | — | |
| W8 | OEM-C84-16 | G5VOODOOPROV-A-A30 | 0.5 | no route | Cam position 2 (G2) | — | |
| W9 | OEM-C88-5 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W10 | OEM-C88-4 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W11 | OEM-C88-24 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W12 | OEM-C88-16 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W13 | OEM-C88-15 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W14 | OEM-C88-26 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W15 | OEM-C88-30 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W16 | OEM-C88-29 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W17 | OEM-C88-10 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 (#10, cyl 1&4) | — | |
| W18 | OEM-C88-9 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 (#20, cyl 3&5) | — | |
| W19 | OEM-C88-8 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 (#30, cyl 2&6) | — | |
| W20 | OEM-C86-9 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W21 | OEM-C84-8 | G5VOODOOPROV-A-A17 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W22 | OEM-C84-7 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position (VTA1) | — | |
| W23 | OEM-C84-20 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W24 | OEM-C85-2 | G5VOODOOPROV-A-A21 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W25 | OEM-C86-5 | G5VOODOOPROV-A-A20 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W26 | OEM-C88-3 | G5VOODOOPROV-E-E15 | 0.5 | no route | O2 heater (HT) | — | |
| W27 | OEM-C88-11 | G5VOODOOPROV-A-A19 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W28 | OEM-C88-23 | G5VOODOOPROV-A-A18 | 0.5 | no route | ISC stepper coil 1 (ISCV1) | — | |
| W29 | OEM-C88-17 | G5VOODOOPROV-E-E22 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W30 | OEM-C88-22 | G5VOODOOPROV-A-A29 | 0.5 | no route | ISC stepper coil 2 (ISCV2) | — | |
| W31 | OEM-C88-21 | G5VOODOOPROV-A-A28 | 0.5 | no route | ISC stepper coil 3 (ISCV3) | — | |
| W32 | OEM-C88-20 | G5VOODOOPROV-A-A27 | 0.5 | no route | ISC stepper coil 4 (ISCV4) | — | |
| W33 | OEM-C85-3 | G5VOODOOPROV-A-A26 | 0.5 | no route | Check-engine lamp (W) | — | |
| W34 | OEM-C85-4 | G5VOODOOPROV-A-A1 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W35 | OEM-C86-8 | G5VOODOOPROV-B-B4 | 0.5 | no route | Cat temp warning light (EGW) | — | |
| W36 | OEM-C88-27 | G5VOODOOPROV-B-B3 | 0.5 | no route | A/T lock-up solenoid (S3) | — | |
| W37 | OEM-C88-7 | G5VOODOOPROV-B-B2 | 0.5 | no route | EVAP purge VSV | — | |
| W38 | OEM-C84-12 | G5VOODOOPROV-A-A33 | 0.5 | no route | TRAC throttle position (VTA2) | — | |
| W39 | OEM-C84-13 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 sensor (OX1) | — | |
| W40 | OEM-C84-14 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (THA) | — | |
| W41 | OEM-C86-13 | G5VOODOOPROV-B-B6 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W42 | OEM-C86-12 | G5VOODOOPROV-A-A31 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W43 | OEM-C84-4 | G5VOODOOPROV-A-A23 | 0.5 | no route | No.2 speed sensor (SP2-) | — | |
| W44 | OEM-C84-9 | G5VOODOOPROV-B-B21 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W45 | OEM-C84-15 | G5VOODOOPROV-B-B20 | 0.5 | no route | OD direct-clutch speed sensor (NCO+) | — | |
| W46 | OEM-C84-3 | G5VOODOOPROV-B-B19 | 0.5 | no route | OD direct-clutch speed sensor (NCO-) | — | |
| W47 | OEM-C85-1 | G5VOODOOPROV-B-B30 | 0.5 | no route | Slave engine speed (NEO) | — | |
| W48 | OEM-C85-10 | G5VOODOOPROV-B-B29 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W49 | OEM-C88-12 | G5VOODOOPROV-B-B28 | 0.5 | no route | Igniter feedback (IGF) | — | |
| W50 | OEM-C85-5 | G5VOODOOPROV-B-B27 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W51 | OEM-C86-7 | G5VOODOOPROV-B-B33 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W52 | OEM-C86-10 | G5VOODOOPROV-B-B15 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W53 | OEM-C86-11 | G5VOODOOPROV-B-B16 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W54 | OEM-C86-6 | G5VOODOOPROV-B-B23 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W55 | OEM-C85-14 | G5VOODOOPROV-B-B24 | 0.5 | no route | ABS active (MT only) | — | |
| W56 | OEM-C85-6 | G5VOODOOPROV-B-B31 | 0.5 | no route | Timing retard (TR) | — | |
| W57 | OEM-C86-1 | G5VOODOOPROV-B-B32 | 0.5 | no route | Diagnostic test terminal (TT) | — | |
| W58 | OEM-C86-17 | G5VOODOOPROV-E-E12 | 0.5 | no route | A/T throttle position (L3) | — | |
| W59 | OEM-C86-18 | G5VOODOOPROV-E-E13 | 0.5 | no route | A/T throttle position (L2) | — | |
| W60 | OEM-C86-19 | G5VOODOOPROV-B-B14 | 0.5 | no route | A/T throttle position (L1) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (30)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | G5 Voodoo Pro V1 | The 1JZ-GTE injectors (1JZ-GTE fuel injector) are low-impedance, but G5 Voodoo Pro V1 drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| error | REQUIRED_UNMAPPED | OEM-C84-22 | Required OEM function "Sensor ground (E2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C85-16 | Required OEM function "Power ground (E1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C86-22 | Required OEM function "EFI main relay power (+B)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C86-23 | Required OEM function "EFI main relay power (+B1)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C88-28 | Required OEM function "Power ground (E11)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C88-33 | Required OEM function "Power ground (E02)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C88-34 | Required OEM function "Power ground (E01)" (ground) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-C86-5 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-C85-2 EFI main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-C84-16 ↔ G5VOODOOPROV-A-A30 | OEM-C84-16 "Cam position 2 (G2)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-C85-14 ↔ G5VOODOOPROV-B-B24 | OEM-C85-14 "ABS active (MT only)" [digital_in] is wired to G5VOODOOPROV-B-B24 "Analogue Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-6 ↔ G5VOODOOPROV-B-B31 | OEM-C85-6 "Timing retard (TR)" [digital_in] is wired to G5VOODOOPROV-B-B31 "Analogue Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-1 ↔ G5VOODOOPROV-B-B32 | OEM-C86-1 "Diagnostic test terminal (TT)" [digital_in] is wired to G5VOODOOPROV-B-B32 "Analogue Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-10 ↔ G5VOODOOPROV-B-B15 | OEM-C86-10 "A/T 2nd-gear indicator (2)" [digital_in] is wired to G5VOODOOPROV-B-B15 "Analogue Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-11 ↔ G5VOODOOPROV-B-B16 | OEM-C86-11 "Diagnostic test 2 (TE2)" [digital_in] is wired to G5VOODOOPROV-B-B16 "Analogue Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-17 ↔ G5VOODOOPROV-E-E12 | OEM-C86-17 "A/T throttle position (L3)" [digital_in] is wired to G5VOODOOPROV-E-E12 "Analogue Volt 12" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-18 ↔ G5VOODOOPROV-E-E13 | OEM-C86-18 "A/T throttle position (L2)" [digital_in] is wired to G5VOODOOPROV-E-E13 "Analogue Volt 13" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-19 ↔ G5VOODOOPROV-B-B14 | OEM-C86-19 "A/T throttle position (L1)" [digital_in] is wired to G5VOODOOPROV-B-B14 "Analogue Volt 14" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-6 ↔ G5VOODOOPROV-B-B23 | OEM-C86-6 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to G5VOODOOPROV-B-B23 "Analogue Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-7 ↔ G5VOODOOPROV-B-B33 | OEM-C86-7 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to G5VOODOOPROV-B-B33 "Analogue Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-C85-3 ↔ G5VOODOOPROV-A-A26 | OEM-C85-3 "Check-engine lamp (W)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-C85-4 ↔ G5VOODOOPROV-A-A1 | OEM-C85-4 "Fuel pump control (FPC)" [low_side_out] is wired to G5VOODOOPROV-A-A1 "Injection 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C86-8 ↔ G5VOODOOPROV-B-B4 | OEM-C86-8 "Cat temp warning light (EGW)" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-20 ↔ G5VOODOOPROV-A-A27 | OEM-C88-20 "ISC stepper coil 4 (ISCV4)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-C88-21 ↔ G5VOODOOPROV-A-A28 | OEM-C88-21 "ISC stepper coil 3 (ISCV3)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-C88-22 ↔ G5VOODOOPROV-A-A29 | OEM-C88-22 "ISC stepper coil 2 (ISCV2)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-C88-27 ↔ G5VOODOOPROV-B-B3 | OEM-C88-27 "A/T lock-up solenoid (S3)" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-7 ↔ G5VOODOOPROV-B-B2 | OEM-C88-7 "EVAP purge VSV" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 15 optional OEM pins are not mapped: OEM-C84-11 Cam 1 return (G1-); OEM-C84-17 Cam 2 return (G2-); OEM-C84-6 Crank sensor return (NE-); OEM-C85-11 Slave TRAC throttle position (VTO2); OEM-C85-7 Slave throttle position (VTO1); OEM-C86-2 A/T low-gear indicator (L); OEM-C86-20 A/C request (A/C); OEM-C86-25 Stop light switch (STP); OEM-C86-28 Electrical load sense (ELS); OEM-C86-3 A/T power/normal mode (P); OEM-C88-13 Starter signal (STA); OEM-C88-14 Neutral/park switch (NSW); OEM-C88-19 Voltage feedback (VF); OEM-C88-31 TRAC throttle idle switch (IDL2); OEM-C88-32 TPS idle switch (IDL1) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-C86-14 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-C84 22: Sensor ground (E2): no rule for class ground_sensor; wire by hand - OEM-C86 22: EFI main relay power (+B): no rule for class ecu_main_power; wire by hand - OEM-C86 23: EFI main relay power (+B1): no rule for class ecu_main_power; wire by hand Not wired: - OEM-C86 14: Battery constant (BATT): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-C86 2: A/T low-gear indicator (L): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C86 20: A/C request (A/C): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C86 25: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C86 28: Electrical load sense (ELS): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C86 3: A/T power/normal mode (P): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C88 13: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C88 14: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C88 31: TRAC throttle idle switch (IDL2): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C88 32: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-C85 11: Slave TRAC throttle position (VTO2): no free analog_out on Link G5 Voodoo Pro V1 - OEM-C85 7: Slave throttle position (VTO1): no free analog_out on Link G5 Voodoo Pro V1 - OEM-C88 19: Voltage feedback (VF): no free analog_out on Link G5 Voodoo Pro V1 - OEM-C84 11: Cam 1 return (G1-): no rule for class ground_sensor; wire by hand - OEM-C84 17: Cam 2 return (G2-): no rule for class ground_sensor; wire by hand - OEM-C84 6: Crank sensor return (NE-): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 2 | community_copy | wilbo666: 1JZ-GTE pinout (JZZ30 Soarer page, shared 1JZ-GTE engine/ECU) | http://wilbo666.pbworks.com/w/page/47216384/1JZ-GTE%20JZZ30%20Soarer | — | — | — |