← Back

Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) → Link G5 Voodoo Pro V2 (auto)

Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) — Link — G5 Voodoo Pro V2
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12

Before you start

Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.

Statusdraft · not yet verified: nobody has reported building and running this harness
Open errors1: read the Findings page before cutting any wire
Size of the job81 wires · 10 connectors · 0 part lines
ToolsCrimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink
Order of work1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up.

Build checklist

Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.

WireFromToGaugeColourCutLabelCrimp ACrimp BPin APin BContinuity
W1OEM-C86-22SP-14V-10.85☐☐☐☐☐☐☐
W2OEM-C86-23SP-14V-10.85☐☐☐☐☐☐☐
W3SP-14V-1G5VOODOOPROV-A-A50.85☐☐☐☐☐☐☐
W4SP-14V-1G5VOODOOPROV-B-B50.85☐☐☐☐☐☐☐
W5OEM-C85-16SP-GND-10.85☐☐☐☐☐☐☐
W6OEM-C88-28SP-GND-10.85☐☐☐☐☐☐☐
W7OEM-C88-33SP-GND-10.85☐☐☐☐☐☐☐
W8OEM-C88-34SP-GND-10.85☐☐☐☐☐☐☐
W9SP-GND-1G5VOODOOPROV-A-A250.85☐☐☐☐☐☐☐
W10SP-GND-1G5VOODOOPROV-A-A340.85☐☐☐☐☐☐☐
W11SP-GND-1G5VOODOOPROV-B-B250.85☐☐☐☐☐☐☐
W12SP-GND-1G5VOODOOPROV-B-B340.85☐☐☐☐☐☐☐
W13SP-GND-1G5VOODOOPROV-E-E210.85☐☐☐☐☐☐☐
W14SP-GND-1G5VOODOOPROV-E-E70.85☐☐☐☐☐☐☐
W15OEM-C84-11SP-0V-10.5☐☐☐☐☐☐☐
W16OEM-C84-17SP-0V-10.5☐☐☐☐☐☐☐
W17OEM-C84-22SP-0V-10.5☐☐☐☐☐☐☐
W18OEM-C84-6SP-0V-10.5☐☐☐☐☐☐☐
W19SP-0V-1G5VOODOOPROV-A-A240.5☐☐☐☐☐☐☐
W20SP-0V-1G5VOODOOPROV-B-B220.5☐☐☐☐☐☐☐
W21OEM-C84-1G5VOODOOPROV-A-A320.5☐☐☐☐☐☐☐
W22OEM-C84-5G5VOODOOPROV-A-A80.5☐☐☐☐☐☐☐
W23OEM-C84-10G5VOODOOPROV-A-A90.5☐☐☐☐☐☐☐
W24OEM-C84-16G5VOODOOPROV-A-A300.5☐☐☐☐☐☐☐
W25OEM-C88-5G5VOODOOPROV-B-B90.5☐☐☐☐☐☐☐
W26OEM-C88-4G5VOODOOPROV-B-B80.5☐☐☐☐☐☐☐
W27OEM-C88-24G5VOODOOPROV-A-A130.5☐☐☐☐☐☐☐
W28OEM-C88-16G5VOODOOPROV-A-A120.5☐☐☐☐☐☐☐
W29OEM-C88-15G5VOODOOPROV-A-A110.5☐☐☐☐☐☐☐
W30OEM-C88-26G5VOODOOPROV-A-A100.5☐☐☐☐☐☐☐
W31OEM-C88-30G5VOODOOPROV-B-B130.5☐☐☐☐☐☐☐
W32OEM-C88-29G5VOODOOPROV-B-B120.5☐☐☐☐☐☐☐
W33OEM-C88-10G5VOODOOPROV-A-A40.5☐☐☐☐☐☐☐
W34OEM-C88-9G5VOODOOPROV-A-A30.5☐☐☐☐☐☐☐
W35OEM-C88-8G5VOODOOPROV-A-A20.5☐☐☐☐☐☐☐
W36OEM-C86-9G5VOODOOPROV-A-A60.5☐☐☐☐☐☐☐
W37OEM-C84-8G5VOODOOPROV-A-A170.5☐☐☐☐☐☐☐
W38OEM-C84-7G5VOODOOPROV-A-A210.5☐☐☐☐☐☐☐
W39OEM-C84-20G5VOODOOPROV-A-A150.5☐☐☐☐☐☐☐
W40OEM-C85-2G5VOODOOPROV-E-E150.5☐☐☐☐☐☐☐
W41OEM-C86-5G5VOODOOPROV-E-E220.5☐☐☐☐☐☐☐
W42OEM-C88-3G5VOODOOPROV-A-A10.5☐☐☐☐☐☐☐
W43OEM-C88-11G5VOODOOPROV-B-B40.5☐☐☐☐☐☐☐
W44OEM-C88-23G5VOODOOPROV-B-B30.5☐☐☐☐☐☐☐
W45OEM-C88-17G5VOODOOPROV-B-B20.5☐☐☐☐☐☐☐
W46OEM-C88-22G5VOODOOPROV-B-B10.5☐☐☐☐☐☐☐
W47OEM-C88-21G5VOODOOPROV-E-E40.5☐☐☐☐☐☐☐
W48OEM-C88-20G5VOODOOPROV-E-E30.5☐☐☐☐☐☐☐
W49OEM-C85-3G5VOODOOPROV-E-E20.5☐☐☐☐☐☐☐
W50OEM-C85-4G5VOODOOPROV-E-E10.5☐☐☐☐☐☐☐
W51OEM-C84-12G5VOODOOPROV-A-A200.5☐☐☐☐☐☐☐
W52OEM-C84-13G5VOODOOPROV-A-A220.5☐☐☐☐☐☐☐
W53OEM-C84-14G5VOODOOPROV-A-A160.5☐☐☐☐☐☐☐
W54OEM-C86-13G5VOODOOPROV-B-B60.5☐☐☐☐☐☐☐
W55OEM-C86-12G5VOODOOPROV-A-A310.5☐☐☐☐☐☐☐
W56OEM-C84-4G5VOODOOPROV-A-A230.5☐☐☐☐☐☐☐
W57OEM-C84-9G5VOODOOPROV-B-B210.5☐☐☐☐☐☐☐
W58OEM-C84-15G5VOODOOPROV-B-B200.5☐☐☐☐☐☐☐
W59OEM-C84-3G5VOODOOPROV-B-B190.5☐☐☐☐☐☐☐
W60OEM-C85-1G5VOODOOPROV-B-B300.5☐☐☐☐☐☐☐
W61OEM-C85-10G5VOODOOPROV-B-B290.5☐☐☐☐☐☐☐
W62OEM-C88-12G5VOODOOPROV-B-B280.5☐☐☐☐☐☐☐
W63OEM-C85-5G5VOODOOPROV-B-B270.5☐☐☐☐☐☐☐
W64OEM-C86-7G5VOODOOPROV-A-A190.5☐☐☐☐☐☐☐
W65OEM-C86-10G5VOODOOPROV-A-A330.5☐☐☐☐☐☐☐
W66OEM-C86-11G5VOODOOPROV-A-A140.5☐☐☐☐☐☐☐
W67OEM-C86-6G5VOODOOPROV-A-A180.5☐☐☐☐☐☐☐
W68OEM-C85-14G5VOODOOPROV-A-A290.5☐☐☐☐☐☐☐
W69OEM-C85-6G5VOODOOPROV-B-B330.5☐☐☐☐☐☐☐
W70OEM-C86-1G5VOODOOPROV-A-A280.5☐☐☐☐☐☐☐
W71OEM-C86-17G5VOODOOPROV-B-B150.5☐☐☐☐☐☐☐
W72OEM-C86-18G5VOODOOPROV-A-A270.5☐☐☐☐☐☐☐
W73OEM-C86-19G5VOODOOPROV-B-B160.5☐☐☐☐☐☐☐
W74OEM-C86-2G5VOODOOPROV-A-A260.5☐☐☐☐☐☐☐
W75OEM-C86-20G5VOODOOPROV-B-B230.5☐☐☐☐☐☐☐
W76OEM-C86-25G5VOODOOPROV-B-B240.5☐☐☐☐☐☐☐
W77OEM-C86-28G5VOODOOPROV-B-B310.5☐☐☐☐☐☐☐
W78OEM-C86-3G5VOODOOPROV-B-B320.5☐☐☐☐☐☐☐
W79OEM-C88-13G5VOODOOPROV-E-E120.5☐☐☐☐☐☐☐
W80OEM-C88-14G5VOODOOPROV-E-E130.5☐☐☐☐☐☐☐
W81OEM-C88-31G5VOODOOPROV-B-B140.5☐☐☐☐☐☐☐

Bench test (before first power-up)

Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).

#Probe AProbe BExpectWhyReading
1G5VOODOOPROV-A-A32G5VOODOOPROV-A-A24open (OL)5 V sensor reference must not touch sensor ground
2G5VOODOOPROV-A-A24G5VOODOOPROV-A-A5open (OL)sensor ground must not touch +12 V supply
3G5VOODOOPROV-A-A25G5VOODOOPROV-A-A32open (OL)power ground must not touch 5 V sensor reference
4G5VOODOOPROV-A-A25G5VOODOOPROV-A-A5open (OL)power ground must not touch +12 V supply
5G5VOODOOPROV-A-A32G5VOODOOPROV-A-A5open (OL)5 V sensor reference must not touch +12 V supply

If any reading doesn't match, stop and get help before powering up.

Revisions

RevLabelByDate
No revisions yet.

Schematic

G5VOODOOPROV-AG5VOODOOPROV-BG5VOODOOPROV-EOEM-C84OEM-C85OEM-C86OEM-C88SP-0VSP-14VSP-GND

Connectors

G5VOODOOPROV-A

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
A1Injection 4—W42—0.5OEM-C88-3———
A10Ignition 4—W30—0.5OEM-C88-26———
A11Ignition 3—W29—0.5OEM-C88-15———
A12Ignition 2—W28—0.5OEM-C88-16———
A13Ignition 1—W27—0.5OEM-C88-24———
A14Analogue Volt 4—W66—0.5OEM-C86-11———
A15Analogue Temp 1—W39—0.5OEM-C84-20———
A16Analogue Temp 2—W53—0.5OEM-C84-14———
A17Analogue Volt 1—W37—0.5OEM-C84-8———
A18ADIO 4—W67—0.5OEM-C86-6———
A19ADIO 3—W64—0.5OEM-C86-7———
A2Injection 3—W35—0.5OEM-C88-8———
A20ADIO 2—W51—0.5OEM-C84-12———
A21ADIO 1—W38—0.5OEM-C84-7———
A22Analogue Volt 2—W52—0.5OEM-C84-13———
A23Digital Input 3—W56—0.5OEM-C84-4———
A24Sensor Ground—W19—0.5SP-0V-1———
A25Ground—W9—0.85SP-GND-1———
A26ADIO 8—W74—0.5OEM-C86-2———
A27ADIO 7—W72—0.5OEM-C86-18———
A28ADIO 6—W70—0.5OEM-C86-1———
A29ADIO 5—W68—0.5OEM-C85-14———
A3Injection 2—W34—0.5OEM-C88-9———
A30Digital Input 1—W24—0.5OEM-C84-16———
A31Digital Input 2—W55—0.5OEM-C86-12———
A32+5V Out—W21—0.5OEM-C84-1———
A33Analogue Volt 3—W65—0.5OEM-C86-10———
A34Ground—W10—0.85SP-GND-1———
A4Injection 1—W33—0.5OEM-C88-10———
A5+14V—W3—0.85SP-14V-1———
A6Ignition Switch—W36—0.5OEM-C86-9———
A7Shield Ground————————
A8Trigger 1—W22—0.5OEM-C84-5———
A9Trigger 2—W23—0.5OEM-C84-10———

G5VOODOOPROV-B

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
B1Injection 8—W46—0.5OEM-C88-22———
B10Ignition 8————————
B11Ignition 7————————
B12Ignition 6—W32—0.5OEM-C88-29———
B13Ignition 5—W31—0.5OEM-C88-30———
B14Analogue Volt 14—W81—0.5OEM-C88-31———
B15Analogue Volt 6—W71—0.5OEM-C86-17———
B16Analogue Volt 7—W73—0.5OEM-C86-19———
B17Shield Ground————————
B18Aux 1 / H-Bridge 1————————
B19Digital Input 6 / K-Line 2—W59—0.5OEM-C84-3———
B2Injection 7—W45—0.5OEM-C88-17———
B20Digital Input 5 / K-Line 1—W58—0.5OEM-C84-15———
B21Digital Input 4—W57—0.5OEM-C84-9———
B22Sensor Ground—W20—0.5SP-0V-1———
B23Analogue Volt 8—W75—0.5OEM-C86-20———
B24Analogue Volt 9—W76—0.5OEM-C86-25———
B25Ground—W11—0.85SP-GND-1———
B26Aux 2 / H-Bridge 1————————
B27Digital Input 10—W63—0.5OEM-C85-5———
B28Digital Input 9—W62—0.5OEM-C88-12———
B29Digital Input 8—W61—0.5OEM-C85-10———
B3Injection 6—W44—0.5OEM-C88-23———
B30Digital Input 7—W60—0.5OEM-C85-1———
B31Analogue Volt 10—W77—0.5OEM-C86-28———
B32Analogue Volt 11—W78—0.5OEM-C86-3———
B33Analogue Volt 5—W69—0.5OEM-C85-6———
B34Ground—W12—0.85SP-GND-1———
B4Injection 5—W43—0.5OEM-C88-11———
B5+14V E-Throttle—W4—0.85SP-14V-1———
B6Analogue Temp 3—W54—0.5OEM-C86-13———
B7Analogue Temp 4————————
B8Knock 2—W26—0.5OEM-C88-4———
B9Knock 1—W25—0.5OEM-C88-5———

G5VOODOOPROV-E

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
E1Injection 12—W50—0.5OEM-C85-4———
E10Ignition 10 / Injection 14————————
E11Ignition 9 / Injection 13————————
E12Analogue Volt 12—W79—0.5OEM-C88-13———
E13Analogue Volt 13—W80—0.5OEM-C88-14———
E14Aux 3 / H-Bridge 2————————
E15Aux 5 / WB1 Heat—W40—0.5OEM-C85-2———
E16WB1 RE————————
E17WB1 IPE————————
E18WB1 APE————————
E19WB1 MES————————
E2Injection 11—W49—0.5OEM-C85-3———
E20Aux 4 / H-Bridge 2————————
E21Ground—W13—0.85SP-GND-1———
E22Aux 6 / WB2 Heat—W41—0.5OEM-C86-5———
E23WB2 RE————————
E24WB2 IPE————————
E25WB2 APE————————
E26WB2 MES————————
E3Injection 10—W48—0.5OEM-C88-20———
E4Injection 9—W47—0.5OEM-C88-21———
E5CAN 2 High————————
E6CAN 2 Low————————
E7Ground—W14—0.85SP-GND-1———
E8Ignition 12 / Injection 16————————
E9Ignition 11 / Injection 15————————

OEM-C84

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1Sensor supply +5V (VCC)—W21—0.5G5VOODOOPROV-A-A32———
10Cam position 1 (G1)—W23—0.5G5VOODOOPROV-A-A9———
11Cam 1 return (G1-)—W15—0.5SP-0V-1———
12TRAC throttle position (VTA2)—W51—0.5G5VOODOOPROV-A-A20———
13O2 sensor (OX1)—W52—0.5G5VOODOOPROV-A-A22———
14Intake air temperature (THA)—W53—0.5G5VOODOOPROV-A-A16———
15OD direct-clutch speed sensor (NCO+)—W58—0.5G5VOODOOPROV-B-B20———
16Cam position 2 (G2)—W24—0.5G5VOODOOPROV-A-A30———
17Cam 2 return (G2-)—W16—0.5SP-0V-1———
20Coolant temperature (THW)—W39—0.5G5VOODOOPROV-A-A15———
22Sensor ground (E2)—W17—0.5SP-0V-1———
3OD direct-clutch speed sensor (NCO-)—W59—0.5G5VOODOOPROV-B-B19———
4No.2 speed sensor (SP2-)—W56—0.5G5VOODOOPROV-A-A23———
5Crank position (NE)—W22—0.5G5VOODOOPROV-A-A8———
6Crank sensor return (NE-)—W18—0.5SP-0V-1———
7Throttle position (VTA1)—W38—0.5G5VOODOOPROV-A-A21———
8Manifold pressure (PIM)—W37—0.5G5VOODOOPROV-A-A17———
9No.2 speed sensor (SP2+)—W57—0.5G5VOODOOPROV-B-B21———

OEM-C85

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1Slave engine speed (NEO)—W60—0.5G5VOODOOPROV-B-B30———
10Fuel pump diagnostic (DI)—W61—0.5G5VOODOOPROV-B-B29———
11Slave TRAC throttle position (VTO2)————————
14ABS active (MT only)—W68—0.5G5VOODOOPROV-A-A29———
16Power ground (E1)—W5—0.85SP-GND-1———
2EFI main relay control (M-REL)—W40—0.5G5VOODOOPROV-E-E15———
3Check-engine lamp (W)—W49—0.5G5VOODOOPROV-E-E2———
4Fuel pump control (FPC)—W50—0.5G5VOODOOPROV-E-E1———
5Diagnostic test 1 (TE1)—W63—0.5G5VOODOOPROV-B-B27———
6Timing retard (TR)—W69—0.5G5VOODOOPROV-B-B33———
7Slave throttle position (VTO1)————————

OEM-C86

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1Diagnostic test terminal (TT)—W70—0.5G5VOODOOPROV-A-A28———
10A/T 2nd-gear indicator (2)—W65—0.5G5VOODOOPROV-A-A33———
11Diagnostic test 2 (TE2)—W66—0.5G5VOODOOPROV-A-A14———
12No.1 speed sensor (SP1)—W55—0.5G5VOODOOPROV-A-A31———
13Cat temperature sensor (CCO)—W54—0.5G5VOODOOPROV-B-B6———
14Battery constant (BATT)————————
17A/T throttle position (L3)—W71—0.5G5VOODOOPROV-B-B15———
18A/T throttle position (L2)—W72—0.5G5VOODOOPROV-A-A27———
19A/T throttle position (L1)—W73—0.5G5VOODOOPROV-B-B16———
2A/T low-gear indicator (L)—W74—0.5G5VOODOOPROV-A-A26———
20A/C request (A/C)—W75—0.5G5VOODOOPROV-B-B23———
22EFI main relay power (+B)—W1—0.85SP-14V-1———
23EFI main relay power (+B1)—W2—0.85SP-14V-1———
25Stop light switch (STP)—W76—0.5G5VOODOOPROV-B-B24———
28Electrical load sense (ELS)—W77—0.5G5VOODOOPROV-B-B31———
3A/T power/normal mode (P)—W78—0.5G5VOODOOPROV-B-B32———
5A/C clutch relay (ACMG)—W41—0.5G5VOODOOPROV-E-E22———
6A/T overdrive disable 2 (OD2)—W67—0.5G5VOODOOPROV-A-A18———
7A/T overdrive disable 1 (OD1)—W64—0.5G5VOODOOPROV-A-A19———
8Cat temp warning light (EGW)————————
9Ignition switch (IGSW)—W36—0.5G5VOODOOPROV-A-A6———

OEM-C88

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
10Injector 1 (#10, cyl 1&4)—W33—0.5G5VOODOOPROV-A-A4———
11A/T shift solenoid 1 (S1)—W43—0.5G5VOODOOPROV-B-B4———
12Igniter feedback (IGF)—W62—0.5G5VOODOOPROV-B-B28———
13Starter signal (STA)—W79—0.5G5VOODOOPROV-E-E12———
14Neutral/park switch (NSW)—W80—0.5G5VOODOOPROV-E-E13———
15Ignition 3 (IGT3)—W29—0.5G5VOODOOPROV-A-A11———
16Ignition 2 (IGT2)—W28—0.5G5VOODOOPROV-A-A12———
17A/T shift solenoid 2 (S2)—W45—0.5G5VOODOOPROV-B-B2———
19Voltage feedback (VF)————————
20ISC stepper coil 4 (ISCV4)—W48—0.5G5VOODOOPROV-E-E3———
21ISC stepper coil 3 (ISCV3)—W47—0.5G5VOODOOPROV-E-E4———
22ISC stepper coil 2 (ISCV2)—W46—0.5G5VOODOOPROV-B-B1———
23ISC stepper coil 1 (ISCV1)—W44—0.5G5VOODOOPROV-B-B3———
24Ignition 1 (IGT1)—W27—0.5G5VOODOOPROV-A-A13———
26Ignition 4 (IGT4)—W30—0.5G5VOODOOPROV-A-A10———
27A/T lock-up solenoid (S3)————————
28Power ground (E11)—W6—0.85SP-GND-1———
29Ignition 6 (IGT6)—W32—0.5G5VOODOOPROV-B-B12———
3O2 heater (HT)—W42—0.5G5VOODOOPROV-A-A1———
30Ignition 5 (IGT5)—W31—0.5G5VOODOOPROV-B-B13———
31TRAC throttle idle switch (IDL2)—W81—0.5G5VOODOOPROV-B-B14———
32TPS idle switch (IDL1)————————
33Power ground (E02)—W7—0.85SP-GND-1———
34Power ground (E01)—W8—0.85SP-GND-1———
4Knock sensor 2 (KNK2, rear)—W26—0.5G5VOODOOPROV-B-B8———
5Knock sensor 1 (KNK1, front)—W25—0.5G5VOODOOPROV-B-B9———
7EVAP purge VSV————————
8Injector 3 (#30, cyl 2&6)—W35—0.5G5VOODOOPROV-A-A2———
9Injector 2 (#20, cyl 3&5)—W34—0.5G5VOODOOPROV-A-A3———

SP-0V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W15—0.5OEM-C84-11———
1——W16—0.5OEM-C84-17———
1——W17—0.5OEM-C84-22———
1——W18—0.5OEM-C84-6———
1——W19—0.5G5VOODOOPROV-A-A24———
1——W20—0.5G5VOODOOPROV-B-B22———

SP-14V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W1—0.85OEM-C86-22———
1——W2—0.85OEM-C86-23———
1——W3—0.85G5VOODOOPROV-A-A5———
1——W4—0.85G5VOODOOPROV-B-B5———

SP-GND

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W5—0.85OEM-C85-16———
1——W6—0.85OEM-C88-28———
1——W7—0.85OEM-C88-33———
1——W8—0.85OEM-C88-34———
1——W9—0.85G5VOODOOPROV-A-A25———
1——W10—0.85G5VOODOOPROV-A-A34———
1——W11—0.85G5VOODOOPROV-B-B25———
1——W12—0.85G5VOODOOPROV-B-B34———
1——W13—0.85G5VOODOOPROV-E-E21———
1——W14—0.85G5VOODOOPROV-E-E7———

Pin map

OEM pointOEM functionOEM familyTarget pointTarget functionTarget familyWire colourEvidence
OEM-C84-1Sensor supply +5V (VCC)vrefG5VOODOOPROV-A-A32+5V Outvrefsingle_source
OEM-C84-10Cam position 1 (G1)trigger_inG5VOODOOPROV-A-A9Trigger 2trigger_insingle_source
OEM-C84-11Cam 1 return (G1-)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C84-12TRAC throttle position (VTA2)analog_inG5VOODOOPROV-A-A20ADIO 2analog_insingle_source
OEM-C84-13O2 sensor (OX1)lambda_nb_inG5VOODOOPROV-A-A22Analogue Volt 2analog_insingle_source
OEM-C84-14Intake air temperature (THA)temp_inG5VOODOOPROV-A-A16Analogue Temp 2temp_insingle_source
OEM-C84-15OD direct-clutch speed sensor (NCO+)digital_inG5VOODOOPROV-B-B20Digital Input 5 / K-Line 1digital_insingle_source
OEM-C84-16Cam position 2 (G2)trigger_inG5VOODOOPROV-A-A30Digital Input 1digital_insingle_source
OEM-C84-17Cam 2 return (G2-)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C84-20Coolant temperature (THW)temp_inG5VOODOOPROV-A-A15Analogue Temp 1temp_insingle_source
OEM-C84-22Sensor ground (E2)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C84-3OD direct-clutch speed sensor (NCO-)digital_inG5VOODOOPROV-B-B19Digital Input 6 / K-Line 2digital_insingle_source
OEM-C84-4No.2 speed sensor (SP2-)digital_inG5VOODOOPROV-A-A23Digital Input 3digital_insingle_source
OEM-C84-5Crank position (NE)trigger_inG5VOODOOPROV-A-A8Trigger 1trigger_insingle_source
OEM-C84-6Crank sensor return (NE-)sensor_groundG5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22Sensor Ground + Sensor Groundsensor_groundsingle_source
OEM-C84-7Throttle position (VTA1)analog_inG5VOODOOPROV-A-A21ADIO 1analog_insingle_source
OEM-C84-8Manifold pressure (PIM)analog_inG5VOODOOPROV-A-A17Analogue Volt 1analog_insingle_source
OEM-C84-9No.2 speed sensor (SP2+)digital_inG5VOODOOPROV-B-B21Digital Input 4digital_insingle_source
OEM-C85-1Slave engine speed (NEO)digital_inG5VOODOOPROV-B-B30Digital Input 7digital_insingle_source
OEM-C85-10Fuel pump diagnostic (DI)digital_inG5VOODOOPROV-B-B29Digital Input 8digital_insingle_source
OEM-C85-11Slave TRAC throttle position (VTO2)analog_out———single_source
OEM-C85-14ABS active (MT only)digital_inG5VOODOOPROV-A-A29ADIO 5analog_insingle_source
OEM-C85-16Power ground (E1)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-C85-2EFI main relay control (M-REL)low_side_outG5VOODOOPROV-E-E15Aux 5 / WB1 Heatlow_side_outsingle_source
OEM-C85-3Check-engine lamp (W)low_side_outG5VOODOOPROV-E-E2Injection 11injector_outsingle_source
OEM-C85-4Fuel pump control (FPC)low_side_outG5VOODOOPROV-E-E1Injection 12injector_outsingle_source
OEM-C85-5Diagnostic test 1 (TE1)digital_inG5VOODOOPROV-B-B27Digital Input 10digital_insingle_source
OEM-C85-6Timing retard (TR)digital_inG5VOODOOPROV-B-B33Analogue Volt 5analog_insingle_source
OEM-C85-7Slave throttle position (VTO1)analog_out———single_source
OEM-C86-1Diagnostic test terminal (TT)digital_inG5VOODOOPROV-A-A28ADIO 6analog_insingle_source
OEM-C86-10A/T 2nd-gear indicator (2)digital_inG5VOODOOPROV-A-A33Analogue Volt 3analog_insingle_source
OEM-C86-11Diagnostic test 2 (TE2)digital_inG5VOODOOPROV-A-A14Analogue Volt 4analog_insingle_source
OEM-C86-12No.1 speed sensor (SP1)digital_inG5VOODOOPROV-A-A31Digital Input 2digital_insingle_source
OEM-C86-13Cat temperature sensor (CCO)temp_inG5VOODOOPROV-B-B6Analogue Temp 3temp_insingle_source
OEM-C86-14Battery constant (BATT)power_in———single_source
OEM-C86-17A/T throttle position (L3)digital_inG5VOODOOPROV-B-B15Analogue Volt 6analog_insingle_source
OEM-C86-18A/T throttle position (L2)digital_inG5VOODOOPROV-A-A27ADIO 7analog_insingle_source
OEM-C86-19A/T throttle position (L1)digital_inG5VOODOOPROV-B-B16Analogue Volt 7analog_insingle_source
OEM-C86-2A/T low-gear indicator (L)digital_inG5VOODOOPROV-A-A26ADIO 8analog_insingle_source
OEM-C86-20A/C request (A/C)digital_inG5VOODOOPROV-B-B23Analogue Volt 8analog_insingle_source
OEM-C86-22EFI main relay power (+B)power_inG5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5+14V + +14V E-Throttlepower_insingle_source
OEM-C86-23EFI main relay power (+B1)power_inG5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5+14V + +14V E-Throttlepower_insingle_source
OEM-C86-25Stop light switch (STP)digital_inG5VOODOOPROV-B-B24Analogue Volt 9analog_insingle_source
OEM-C86-28Electrical load sense (ELS)digital_inG5VOODOOPROV-B-B31Analogue Volt 10analog_insingle_source
OEM-C86-3A/T power/normal mode (P)digital_inG5VOODOOPROV-B-B32Analogue Volt 11analog_insingle_source
OEM-C86-5A/C clutch relay (ACMG)low_side_outG5VOODOOPROV-E-E22Aux 6 / WB2 Heatlow_side_outsingle_source
OEM-C86-6A/T overdrive disable 2 (OD2)digital_inG5VOODOOPROV-A-A18ADIO 4analog_insingle_source
OEM-C86-7A/T overdrive disable 1 (OD1)digital_inG5VOODOOPROV-A-A19ADIO 3analog_insingle_source
OEM-C86-8Cat temp warning light (EGW)low_side_out———single_source
OEM-C86-9Ignition switch (IGSW)digital_inG5VOODOOPROV-A-A6Ignition Switchdigital_insingle_source
OEM-C88-10Injector 1 (#10, cyl 1&4)injector_outG5VOODOOPROV-A-A4Injection 1injector_outsingle_source
OEM-C88-11A/T shift solenoid 1 (S1)low_side_outG5VOODOOPROV-B-B4Injection 5injector_outsingle_source
OEM-C88-12Igniter feedback (IGF)digital_inG5VOODOOPROV-B-B28Digital Input 9digital_insingle_source
OEM-C88-13Starter signal (STA)digital_inG5VOODOOPROV-E-E12Analogue Volt 12analog_insingle_source
OEM-C88-14Neutral/park switch (NSW)digital_inG5VOODOOPROV-E-E13Analogue Volt 13analog_insingle_source
OEM-C88-15Ignition 3 (IGT3)ignition_outG5VOODOOPROV-A-A11Ignition 3ignition_outsingle_source
OEM-C88-16Ignition 2 (IGT2)ignition_outG5VOODOOPROV-A-A12Ignition 2ignition_outsingle_source
OEM-C88-17A/T shift solenoid 2 (S2)low_side_outG5VOODOOPROV-B-B2Injection 7injector_outsingle_source
OEM-C88-19Voltage feedback (VF)analog_out———single_source
OEM-C88-20ISC stepper coil 4 (ISCV4)low_side_outG5VOODOOPROV-E-E3Injection 10injector_outsingle_source
OEM-C88-21ISC stepper coil 3 (ISCV3)low_side_outG5VOODOOPROV-E-E4Injection 9injector_outsingle_source
OEM-C88-22ISC stepper coil 2 (ISCV2)low_side_outG5VOODOOPROV-B-B1Injection 8injector_outsingle_source
OEM-C88-23ISC stepper coil 1 (ISCV1)low_side_outG5VOODOOPROV-B-B3Injection 6injector_outsingle_source
OEM-C88-24Ignition 1 (IGT1)ignition_outG5VOODOOPROV-A-A13Ignition 1ignition_outsingle_source
OEM-C88-26Ignition 4 (IGT4)ignition_outG5VOODOOPROV-A-A10Ignition 4ignition_outsingle_source
OEM-C88-27A/T lock-up solenoid (S3)low_side_out———single_source
OEM-C88-28Power ground (E11)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-C88-29Ignition 6 (IGT6)ignition_outG5VOODOOPROV-B-B12Ignition 6ignition_outsingle_source
OEM-C88-3O2 heater (HT)low_side_outG5VOODOOPROV-A-A1Injection 4injector_outsingle_source
OEM-C88-30Ignition 5 (IGT5)ignition_outG5VOODOOPROV-B-B13Ignition 5ignition_outsingle_source
OEM-C88-31TRAC throttle idle switch (IDL2)digital_inG5VOODOOPROV-B-B14Analogue Volt 14analog_insingle_source
OEM-C88-32TPS idle switch (IDL1)digital_in———single_source
OEM-C88-33Power ground (E02)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-C88-34Power ground (E01)groundG5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7Ground + Ground + Ground + Ground + Ground + Groundgroundsingle_source
OEM-C88-4Knock sensor 2 (KNK2, rear)knock_inG5VOODOOPROV-B-B8Knock 2knock_insingle_source
OEM-C88-5Knock sensor 1 (KNK1, front)knock_inG5VOODOOPROV-B-B9Knock 1knock_insingle_source
OEM-C88-7EVAP purge VSVlow_side_out———single_source
OEM-C88-8Injector 3 (#30, cyl 2&6)injector_outG5VOODOOPROV-A-A2Injection 3injector_outsingle_source
OEM-C88-9Injector 2 (#20, cyl 3&5)injector_outG5VOODOOPROV-A-A3Injection 2injector_outsingle_source

Cut list

WireFromToGauge (mm²)ColourLengthSignalIdent
W1OEM-C86-22SP-14V-10.85no routeEFI main relay power (+B)—
W2OEM-C86-23SP-14V-10.85no routeEFI main relay power (+B1)—
W3SP-14V-1G5VOODOOPROV-A-A50.85no route+14V—
W4SP-14V-1G5VOODOOPROV-B-B50.85no route+14V E-Throttle—
W5OEM-C85-16SP-GND-10.85no routePower ground (E1)—
W6OEM-C88-28SP-GND-10.85no routePower ground (E11)—
W7OEM-C88-33SP-GND-10.85no routePower ground (E02)—
W8OEM-C88-34SP-GND-10.85no routePower ground (E01)—
W9SP-GND-1G5VOODOOPROV-A-A250.85no routeGround—
W10SP-GND-1G5VOODOOPROV-A-A340.85no routeGround—
W11SP-GND-1G5VOODOOPROV-B-B250.85no routeGround—
W12SP-GND-1G5VOODOOPROV-B-B340.85no routeGround—
W13SP-GND-1G5VOODOOPROV-E-E210.85no routeGround—
W14SP-GND-1G5VOODOOPROV-E-E70.85no routeGround—
W15OEM-C84-11SP-0V-10.5no routeCam 1 return (G1-)—
W16OEM-C84-17SP-0V-10.5no routeCam 2 return (G2-)—
W17OEM-C84-22SP-0V-10.5no routeSensor ground (E2)—
W18OEM-C84-6SP-0V-10.5no routeCrank sensor return (NE-)—
W19SP-0V-1G5VOODOOPROV-A-A240.5no routeSensor Ground—
W20SP-0V-1G5VOODOOPROV-B-B220.5no routeSensor Ground—
W21OEM-C84-1G5VOODOOPROV-A-A320.5no routeSensor supply +5V (VCC)—
W22OEM-C84-5G5VOODOOPROV-A-A80.5no routeCrank position (NE)—
W23OEM-C84-10G5VOODOOPROV-A-A90.5no routeCam position 1 (G1)—
W24OEM-C84-16G5VOODOOPROV-A-A300.5no routeCam position 2 (G2)—
W25OEM-C88-5G5VOODOOPROV-B-B90.5no routeKnock sensor 1 (KNK1, front)—
W26OEM-C88-4G5VOODOOPROV-B-B80.5no routeKnock sensor 2 (KNK2, rear)—
W27OEM-C88-24G5VOODOOPROV-A-A130.5no routeIgnition 1 (IGT1)—
W28OEM-C88-16G5VOODOOPROV-A-A120.5no routeIgnition 2 (IGT2)—
W29OEM-C88-15G5VOODOOPROV-A-A110.5no routeIgnition 3 (IGT3)—
W30OEM-C88-26G5VOODOOPROV-A-A100.5no routeIgnition 4 (IGT4)—
W31OEM-C88-30G5VOODOOPROV-B-B130.5no routeIgnition 5 (IGT5)—
W32OEM-C88-29G5VOODOOPROV-B-B120.5no routeIgnition 6 (IGT6)—
W33OEM-C88-10G5VOODOOPROV-A-A40.5no routeInjector 1 (#10, cyl 1&4)—
W34OEM-C88-9G5VOODOOPROV-A-A30.5no routeInjector 2 (#20, cyl 3&5)—
W35OEM-C88-8G5VOODOOPROV-A-A20.5no routeInjector 3 (#30, cyl 2&6)—
W36OEM-C86-9G5VOODOOPROV-A-A60.5no routeIgnition switch (IGSW)—
W37OEM-C84-8G5VOODOOPROV-A-A170.5no routeManifold pressure (PIM)—
W38OEM-C84-7G5VOODOOPROV-A-A210.5no routeThrottle position (VTA1)—
W39OEM-C84-20G5VOODOOPROV-A-A150.5no routeCoolant temperature (THW)—
W40OEM-C85-2G5VOODOOPROV-E-E150.5no routeEFI main relay control (M-REL)—
W41OEM-C86-5G5VOODOOPROV-E-E220.5no routeA/C clutch relay (ACMG)—
W42OEM-C88-3G5VOODOOPROV-A-A10.5no routeO2 heater (HT)—
W43OEM-C88-11G5VOODOOPROV-B-B40.5no routeA/T shift solenoid 1 (S1)—
W44OEM-C88-23G5VOODOOPROV-B-B30.5no routeISC stepper coil 1 (ISCV1)—
W45OEM-C88-17G5VOODOOPROV-B-B20.5no routeA/T shift solenoid 2 (S2)—
W46OEM-C88-22G5VOODOOPROV-B-B10.5no routeISC stepper coil 2 (ISCV2)—
W47OEM-C88-21G5VOODOOPROV-E-E40.5no routeISC stepper coil 3 (ISCV3)—
W48OEM-C88-20G5VOODOOPROV-E-E30.5no routeISC stepper coil 4 (ISCV4)—
W49OEM-C85-3G5VOODOOPROV-E-E20.5no routeCheck-engine lamp (W)—
W50OEM-C85-4G5VOODOOPROV-E-E10.5no routeFuel pump control (FPC)—
W51OEM-C84-12G5VOODOOPROV-A-A200.5no routeTRAC throttle position (VTA2)—
W52OEM-C84-13G5VOODOOPROV-A-A220.5no routeO2 sensor (OX1)—
W53OEM-C84-14G5VOODOOPROV-A-A160.5no routeIntake air temperature (THA)—
W54OEM-C86-13G5VOODOOPROV-B-B60.5no routeCat temperature sensor (CCO)—
W55OEM-C86-12G5VOODOOPROV-A-A310.5no routeNo.1 speed sensor (SP1)—
W56OEM-C84-4G5VOODOOPROV-A-A230.5no routeNo.2 speed sensor (SP2-)—
W57OEM-C84-9G5VOODOOPROV-B-B210.5no routeNo.2 speed sensor (SP2+)—
W58OEM-C84-15G5VOODOOPROV-B-B200.5no routeOD direct-clutch speed sensor (NCO+)—
W59OEM-C84-3G5VOODOOPROV-B-B190.5no routeOD direct-clutch speed sensor (NCO-)—
W60OEM-C85-1G5VOODOOPROV-B-B300.5no routeSlave engine speed (NEO)—
W61OEM-C85-10G5VOODOOPROV-B-B290.5no routeFuel pump diagnostic (DI)—
W62OEM-C88-12G5VOODOOPROV-B-B280.5no routeIgniter feedback (IGF)—
W63OEM-C85-5G5VOODOOPROV-B-B270.5no routeDiagnostic test 1 (TE1)—
W64OEM-C86-7G5VOODOOPROV-A-A190.5no routeA/T overdrive disable 1 (OD1)—
W65OEM-C86-10G5VOODOOPROV-A-A330.5no routeA/T 2nd-gear indicator (2)—
W66OEM-C86-11G5VOODOOPROV-A-A140.5no routeDiagnostic test 2 (TE2)—
W67OEM-C86-6G5VOODOOPROV-A-A180.5no routeA/T overdrive disable 2 (OD2)—
W68OEM-C85-14G5VOODOOPROV-A-A290.5no routeABS active (MT only)—
W69OEM-C85-6G5VOODOOPROV-B-B330.5no routeTiming retard (TR)—
W70OEM-C86-1G5VOODOOPROV-A-A280.5no routeDiagnostic test terminal (TT)—
W71OEM-C86-17G5VOODOOPROV-B-B150.5no routeA/T throttle position (L3)—
W72OEM-C86-18G5VOODOOPROV-A-A270.5no routeA/T throttle position (L2)—
W73OEM-C86-19G5VOODOOPROV-B-B160.5no routeA/T throttle position (L1)—
W74OEM-C86-2G5VOODOOPROV-A-A260.5no routeA/T low-gear indicator (L)—
W75OEM-C86-20G5VOODOOPROV-B-B230.5no routeA/C request (A/C)—
W76OEM-C86-25G5VOODOOPROV-B-B240.5no routeStop light switch (STP)—
W77OEM-C86-28G5VOODOOPROV-B-B310.5no routeElectrical load sense (ELS)—
W78OEM-C86-3G5VOODOOPROV-B-B320.5no routeA/T power/normal mode (P)—
W79OEM-C88-13G5VOODOOPROV-E-E120.5no routeStarter signal (STA)—
W80OEM-C88-14G5VOODOOPROV-E-E130.5no routeNeutral/park switch (NSW)—
W81OEM-C88-31G5VOODOOPROV-B-B140.5no routeTRAC throttle idle switch (IDL2)—

Bill of materials

CategoryPart numberManufacturerDescriptionQtyUnit

ECU setup sheet

RoleEngine refEngine signalSensorECU pointECU functionECU classSetup flag
No configured channels.

Findings

Open (32)

SeverityCodeSubjectMessage
errorINJECTOR_BALLASTG5 Voodoo Pro V2The 1JZ-GTE injectors (1JZ-GTE fuel injector) are low-impedance, but G5 Voodoo Pro V2 drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers.
warnLOAD_UNKNOWNG5VOODOOPROV-E-E15G5VOODOOPROV-E-E15 "Aux 5 / WB1 Heat" drives OEM-C85-2 EFI main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual.
warnLOAD_UNKNOWNG5VOODOOPROV-E-E22G5VOODOOPROV-E-E22 "Aux 6 / WB2 Heat" drives OEM-C86-5 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual.
warnNET_FAMILYOEM-C84-16 ↔ G5VOODOOPROV-A-A30OEM-C84-16 "Cam position 2 (G2)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot.
warnNET_FAMILYOEM-C85-14 ↔ G5VOODOOPROV-A-A29OEM-C85-14 "ABS active (MT only)" [digital_in] is wired to G5VOODOOPROV-A-A29 "ADIO 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C85-6 ↔ G5VOODOOPROV-B-B33OEM-C85-6 "Timing retard (TR)" [digital_in] is wired to G5VOODOOPROV-B-B33 "Analogue Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-1 ↔ G5VOODOOPROV-A-A28OEM-C86-1 "Diagnostic test terminal (TT)" [digital_in] is wired to G5VOODOOPROV-A-A28 "ADIO 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-10 ↔ G5VOODOOPROV-A-A33OEM-C86-10 "A/T 2nd-gear indicator (2)" [digital_in] is wired to G5VOODOOPROV-A-A33 "Analogue Volt 3" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-11 ↔ G5VOODOOPROV-A-A14OEM-C86-11 "Diagnostic test 2 (TE2)" [digital_in] is wired to G5VOODOOPROV-A-A14 "Analogue Volt 4" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-17 ↔ G5VOODOOPROV-B-B15OEM-C86-17 "A/T throttle position (L3)" [digital_in] is wired to G5VOODOOPROV-B-B15 "Analogue Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-18 ↔ G5VOODOOPROV-A-A27OEM-C86-18 "A/T throttle position (L2)" [digital_in] is wired to G5VOODOOPROV-A-A27 "ADIO 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-19 ↔ G5VOODOOPROV-B-B16OEM-C86-19 "A/T throttle position (L1)" [digital_in] is wired to G5VOODOOPROV-B-B16 "Analogue Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-2 ↔ G5VOODOOPROV-A-A26OEM-C86-2 "A/T low-gear indicator (L)" [digital_in] is wired to G5VOODOOPROV-A-A26 "ADIO 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-20 ↔ G5VOODOOPROV-B-B23OEM-C86-20 "A/C request (A/C)" [digital_in] is wired to G5VOODOOPROV-B-B23 "Analogue Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-25 ↔ G5VOODOOPROV-B-B24OEM-C86-25 "Stop light switch (STP)" [digital_in] is wired to G5VOODOOPROV-B-B24 "Analogue Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-28 ↔ G5VOODOOPROV-B-B31OEM-C86-28 "Electrical load sense (ELS)" [digital_in] is wired to G5VOODOOPROV-B-B31 "Analogue Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-3 ↔ G5VOODOOPROV-B-B32OEM-C86-3 "A/T power/normal mode (P)" [digital_in] is wired to G5VOODOOPROV-B-B32 "Analogue Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-6 ↔ G5VOODOOPROV-A-A18OEM-C86-6 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to G5VOODOOPROV-A-A18 "ADIO 4" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C86-7 ↔ G5VOODOOPROV-A-A19OEM-C86-7 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to G5VOODOOPROV-A-A19 "ADIO 3" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C88-13 ↔ G5VOODOOPROV-E-E12OEM-C88-13 "Starter signal (STA)" [digital_in] is wired to G5VOODOOPROV-E-E12 "Analogue Volt 12" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C88-14 ↔ G5VOODOOPROV-E-E13OEM-C88-14 "Neutral/park switch (NSW)" [digital_in] is wired to G5VOODOOPROV-E-E13 "Analogue Volt 13" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
warnNET_FAMILYOEM-C88-31 ↔ G5VOODOOPROV-B-B14OEM-C88-31 "TRAC throttle idle switch (IDL2)" [digital_in] is wired to G5VOODOOPROV-B-B14 "Analogue Volt 14" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value.
infoNET_FAMILYOEM-C85-3 ↔ G5VOODOOPROV-E-E2OEM-C85-3 "Check-engine lamp (W)" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C85-4 ↔ G5VOODOOPROV-E-E1OEM-C85-4 "Fuel pump control (FPC)" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-11 ↔ G5VOODOOPROV-B-B4OEM-C88-11 "A/T shift solenoid 1 (S1)" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-17 ↔ G5VOODOOPROV-B-B2OEM-C88-17 "A/T shift solenoid 2 (S2)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-20 ↔ G5VOODOOPROV-E-E3OEM-C88-20 "ISC stepper coil 4 (ISCV4)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-21 ↔ G5VOODOOPROV-E-E4OEM-C88-21 "ISC stepper coil 3 (ISCV3)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-22 ↔ G5VOODOOPROV-B-B1OEM-C88-22 "ISC stepper coil 2 (ISCV2)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-23 ↔ G5VOODOOPROV-B-B3OEM-C88-23 "ISC stepper coil 1 (ISCV1)" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoNET_FAMILYOEM-C88-3 ↔ G5VOODOOPROV-A-A1OEM-C88-3 "O2 heater (HT)" [low_side_out] is wired to G5VOODOOPROV-A-A1 "Injection 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency.
infoUNMAPPEDOEM7 optional OEM pins are not mapped: OEM-C85-11 Slave TRAC throttle position (VTO2); OEM-C85-7 Slave throttle position (VTO1); OEM-C86-8 Cat temp warning light (EGW); OEM-C88-19 Voltage feedback (VF); OEM-C88-27 A/T lock-up solenoid (S3); OEM-C88-32 TPS idle switch (IDL1); OEM-C88-7 EVAP purge VSV

Accepted (1)

CodeSubjectReasonBy
REQUIRED_UNMAPPEDOEM-C86-14Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed.mapping-proposal

Notes

Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-C86 14: Battery constant (BATT): Link G5 Voodoo Pro V2 has no battery-constant input; not needed - OEM-C86 8: Cat temp warning light (EGW): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-C88 27: A/T lock-up solenoid (S3): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-C88 7: EVAP purge VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-C88 32: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V2 - OEM-C85 11: Slave TRAC throttle position (VTO2): no free analog_out on Link G5 Voodoo Pro V2 - OEM-C85 7: Slave throttle position (VTO1): no free analog_out on Link G5 Voodoo Pro V2 - OEM-C88 19: Voltage feedback (VF): no free analog_out on Link G5 Voodoo Pro V2

Sources

ReliabilityKindTitleURLArchiveCapturedSHA-256
4vendor_docLink G5 Voodoo Pro V2 Installer I/O Tablehttps://kb.linkecu.com/__attachments/a_f77d027cd0c72fff9873eaed54ce6e4ec34cf9da8ae01036efdbecbb8c95be0b/G5%20Voodoo%20Pro%20V2%20Installer%20IO%20Table.pdf———
2community_copywilbo666: 1JZ-GTE pinout (JZZ30 Soarer page, shared 1JZ-GTE engine/ECU)http://wilbo666.pbworks.com/w/page/47216384/1JZ-GTE%20JZZ30%20Soarer———