Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) → MaxxECU MaxxECU GEN2 RACE (auto)
Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) — MaxxECU — MaxxECU GEN2 RACE
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 75 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C85-16 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C88-28 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C88-33 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C88-34 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-C84-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-C84-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-C84-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-C84-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-C84-1 | MAXXECUGEN2R-MX1-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-C84-5 | MAXXECUGEN2R-MX1-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-C84-10 | MAXXECUGEN2R-MX1-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-C88-5 | MAXXECUGEN2R-MX2-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-C88-4 | MAXXECUGEN2R-MX2-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-C88-24 | MAXXECUGEN2R-MX1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-C88-16 | MAXXECUGEN2R-MX1-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-C88-15 | MAXXECUGEN2R-MX1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-C88-26 | MAXXECUGEN2R-MX1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-C88-30 | MAXXECUGEN2R-MX2-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-C88-29 | MAXXECUGEN2R-MX2-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C88-10 | MAXXECUGEN2R-MX1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C88-9 | MAXXECUGEN2R-MX1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-C88-8 | MAXXECUGEN2R-MX1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C86-9 | MAXXECUGEN2R-MX2-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-C84-8 | MAXXECUGEN2R-MX1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C84-7 | MAXXECUGEN2R-MX1-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C84-20 | MAXXECUGEN2R-MX1-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C85-2 | MAXXECUGEN2R-MX1-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C86-5 | MAXXECUGEN2R-MX1-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C88-3 | MAXXECUGEN2R-MX2-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C88-11 | MAXXECUGEN2R-MX1-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C88-23 | MAXXECUGEN2R-MX1-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C88-17 | MAXXECUGEN2R-MX1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C88-22 | MAXXECUGEN2R-MX2-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C88-21 | MAXXECUGEN2R-MX3-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-C88-20 | MAXXECUGEN2R-MX1-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C85-3 | MAXXECUGEN2R-MX2-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C85-4 | MAXXECUGEN2R-MX2-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C86-8 | MAXXECUGEN2R-MX3-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C88-27 | MAXXECUGEN2R-MX3-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C88-7 | MAXXECUGEN2R-MX3-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C84-12 | MAXXECUGEN2R-MX1-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C84-13 | MAXXECUGEN2R-MX1-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C84-14 | MAXXECUGEN2R-MX2-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C86-13 | MAXXECUGEN2R-MX2-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C86-12 | MAXXECUGEN2R-MX1-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C84-4 | MAXXECUGEN2R-MX1-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C84-9 | MAXXECUGEN2R-MX4-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C84-15 | MAXXECUGEN2R-MX4-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C84-3 | MAXXECUGEN2R-MX4-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C85-1 | MAXXECUGEN2R-MX4-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C85-5 | MAXXECUGEN2R-MX2-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C86-7 | MAXXECUGEN2R-MX2-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C86-10 | MAXXECUGEN2R-MX2-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-C86-11 | MAXXECUGEN2R-MX2-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-C86-6 | MAXXECUGEN2R-MX2-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-C85-14 | MAXXECUGEN2R-MX2-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C85-6 | MAXXECUGEN2R-MX2-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C86-1 | MAXXECUGEN2R-MX2-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C86-17 | MAXXECUGEN2R-MX2-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-C86-18 | MAXXECUGEN2R-MX3-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-C86-19 | MAXXECUGEN2R-MX3-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-C86-2 | MAXXECUGEN2R-MX3-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-C86-20 | MAXXECUGEN2R-MX3-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-C86-25 | MAXXECUGEN2R-MX3-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-C86-28 | MAXXECUGEN2R-MX3-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-C86-3 | MAXXECUGEN2R-MX3-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-C88-13 | MAXXECUGEN2R-MX3-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECUGEN2R-MX1-12 | MAXXECUGEN2R-MX1-14 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | MAXXECUGEN2R-MX1-12 | MAXXECUGEN2R-MX1-25 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 3 | MAXXECUGEN2R-MX1-14 | MAXXECUGEN2R-MX1-25 | open (OL) | sensor ground must not touch +12 V supply | |
| 4 | MAXXECUGEN2R-MX1-9 | MAXXECUGEN2R-MX1-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | MAXXECUGEN2R-MX1-9 | MAXXECUGEN2R-MX1-25 | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUGEN2R-MX1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 1 | — | W22 | — | 0.5 | OEM-C88-24 | — | — | — |
| 10 | Digital/VR 1 SIGNAL + | — | W18 | — | 0.5 | OEM-C84-5 | — | — | — |
| 11 | Digital/VR 1 SIGNAL - | — | — | — | — | — | — | — | — |
| 12 | Digital/VR 1 POWER SUPPLY | — | W17 | — | 0.5 | OEM-C84-1 | — | — | — |
| 13 | Digital/VR 1 SHIELD | — | — | — | — | — | — | — | — |
| 14 | SENSOR GND | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CAN L | — | — | — | — | — | — | — | — |
| 16 | CAN H | — | — | — | — | — | — | — | — |
| 17 | GP out 5 (GND) | — | W40 | — | 0.5 | OEM-C88-17 | — | — | — |
| 18 | Digital/VR 2 SIGNAL + | — | W19 | — | 0.5 | OEM-C84-10 | — | — | — |
| 19 | Digital/VR 2 SIGNAL - | — | — | — | — | — | — | — | — |
| 2 | Ignition 2 | — | W23 | — | 0.5 | OEM-C88-16 | — | — | — |
| 20 | Digital/VR 2 POWER SUPPLY | — | — | — | — | — | — | — | — |
| 21 | Digital/VR 2 SHIELD | — | — | — | — | — | — | — | — |
| 22 | 5V power supply | — | — | — | — | — | — | — | — |
| 23 | Digital/VR 3 SIGNAL + | — | W53 | — | 0.5 | OEM-C86-12 | — | — | — |
| 24 | Digital/VR 4 SIGNAL + | — | W54 | — | 0.5 | OEM-C84-4 | — | — | — |
| 25 | 12V supply 1 | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | AIN 1 | — | W32 | — | 0.5 | OEM-C84-8 | — | — | — |
| 27 | AIN 2 | — | W33 | — | 0.5 | OEM-C84-7 | — | — | — |
| 28 | AIN 3 | — | W34 | — | 0.5 | OEM-C84-20 | — | — | — |
| 29 | AIN 4 | — | W49 | — | 0.5 | OEM-C84-12 | — | — | — |
| 3 | Ignition 3 | — | W24 | — | 0.5 | OEM-C88-15 | — | — | — |
| 30 | AIN 5 | — | W50 | — | 0.5 | OEM-C84-13 | — | — | — |
| 31 | INJECTOR 1 | — | W28 | — | 0.5 | OEM-C88-10 | — | — | — |
| 32 | INJECTOR 2 | — | W29 | — | 0.5 | OEM-C88-9 | — | — | — |
| 33 | INJECTOR 3 | — | W30 | — | 0.5 | OEM-C88-8 | — | — | — |
| 34 | INJECTOR 4 | — | W43 | — | 0.5 | OEM-C88-20 | — | — | — |
| 4 | Ignition 4 | — | W25 | — | 0.5 | OEM-C88-26 | — | — | — |
| 5 | GP out 1 (GND) | — | W35 | — | 0.5 | OEM-C85-2 | — | — | — |
| 6 | GP out 2 (GND) | — | W36 | — | 0.5 | OEM-C86-5 | — | — | — |
| 7 | GP out 3 (GND) | — | W38 | — | 0.5 | OEM-C88-11 | — | — | — |
| 8 | GP out 4 (GND) | — | W39 | — | 0.5 | OEM-C88-23 | — | — | — |
| 9 | Engine gnd | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 5 | — | W26 | — | 0.5 | OEM-C88-30 | — | — | — |
| 10 | WBO2 Sensor 1 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 Sensor 1 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP OUT 7 / WBO2 Sensor 1 H- | — | W37 | — | 0.5 | OEM-C88-3 | — | — | — |
| 13 | AIN 9 | — | W60 | — | 0.5 | OEM-C86-7 | — | — | — |
| 14 | AIN 10 | — | W61 | — | 0.5 | OEM-C86-10 | — | — | — |
| 15 | AIN 11 | — | W62 | — | 0.5 | OEM-C86-11 | — | — | — |
| 16 | AIN 12 | — | W63 | — | 0.5 | OEM-C86-6 | — | — | — |
| 17 | AIN 13 | — | W64 | — | 0.5 | OEM-C85-14 | — | — | — |
| 18 | WBO2 sensor 1 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 1 IP | — | — | — | — | — | — | — | — |
| 2 | Ignition 6 | — | W27 | — | 0.5 | OEM-C88-29 | — | — | — |
| 20 | 12V WBO2 sensor 1 H+ | — | — | — | — | — | — | — | — |
| 21 | WBO2 sensor 1 SHIELD | — | — | — | — | — | — | — | — |
| 22 | AIN 14 | — | W65 | — | 0.5 | OEM-C85-6 | — | — | — |
| 23 | AIN 15 | — | W66 | — | 0.5 | OEM-C86-1 | — | — | — |
| 24 | 12V supply 3 | — | W31 | — | 0.5 | OEM-C86-9 | — | — | — |
| 25 | 12V supply 2 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | KNOCK1 SHIELD | — | — | — | — | — | — | — | — |
| 27 | KNOCK 1- | — | — | — | — | — | — | — | — |
| 28 | KNOCK 1+ | — | W20 | — | 0.5 | OEM-C88-5 | — | — | — |
| 29 | KNOCK 2 SHIELD | — | — | — | — | — | — | — | — |
| 3 | GP out 6 (GND) | — | W41 | — | 0.5 | OEM-C88-22 | — | — | — |
| 30 | KNOCK 2- | — | — | — | — | — | — | — | — |
| 31 | KNOCK 2+ | — | W21 | — | 0.5 | OEM-C88-4 | — | — | — |
| 32 | AIN 16 | — | W67 | — | 0.5 | OEM-C86-17 | — | — | — |
| 33 | INJECTOR 5 | — | W44 | — | 0.5 | OEM-C85-3 | — | — | — |
| 34 | INJECTOR 6 | — | W45 | — | 0.5 | OEM-C85-4 | — | — | — |
| 4 | AIN 6 | — | W51 | — | 0.5 | OEM-C84-14 | — | — | — |
| 5 | AIN 7 | — | W52 | — | 0.5 | OEM-C86-13 | — | — | — |
| 6 | AIN 8 | — | W59 | — | 0.5 | OEM-C85-5 | — | — | — |
| 7 | GP out 13 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 8 | GP out 14 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | GP out 15 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 10 | WBO2 sensor 2 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 sensor 2 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | — | W42 | — | 0.5 | OEM-C88-21 | — | — | — |
| 13 | WBO2 sensor 2 SHIELD | — | — | — | — | — | — | — | — |
| 14 | GP OUT 9 (12V) | — | — | — | — | — | — | — | — |
| 15 | GP OUT 10 (12V) | — | — | — | — | — | — | — | — |
| 16 | GP OUT 11 (12V) | — | — | — | — | — | — | — | — |
| 17 | GP OUT 12 (12V) | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 2 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 2 IP | — | — | — | — | — | — | — | — |
| 2 | GP out 16 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 2 (H+) | — | — | — | — | — | — | — | — |
| 21 | AIN 17 | — | W68 | — | 0.5 | OEM-C86-18 | — | — | — |
| 22 | AIN 18 | — | W69 | — | 0.5 | OEM-C86-19 | — | — | — |
| 23 | AIN 19 | — | W70 | — | 0.5 | OEM-C86-2 | — | — | — |
| 24 | AIN 20 | — | W71 | — | 0.5 | OEM-C86-20 | — | — | — |
| 25 | AIN 21 | — | W72 | — | 0.5 | OEM-C86-25 | — | — | — |
| 26 | AIN 22 | — | W73 | — | 0.5 | OEM-C86-28 | — | — | — |
| 27 | AIN 23 | — | W74 | — | 0.5 | OEM-C86-3 | — | — | — |
| 28 | AIN 24 | — | W75 | — | 0.5 | OEM-C88-13 | — | — | — |
| 29 | INJECTOR 7 | — | W46 | — | 0.5 | OEM-C86-8 | — | — | — |
| 3 | Ignition 7 | — | — | — | — | — | — | — | — |
| 30 | INJECTOR 8 | — | W47 | — | 0.5 | OEM-C88-27 | — | — | — |
| 31 | INJECTOR 9 | — | W48 | — | 0.5 | OEM-C88-7 | — | — | — |
| 32 | INJECTOR 10 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 11 | — | — | — | — | — | — | — | — |
| 34 | INJECTOR 12 | — | — | — | — | — | — | — | — |
| 4 | Ignition 8 | — | — | — | — | — | — | — | — |
| 5 | Ignition 9 | — | — | — | — | — | — | — | — |
| 6 | Ignition 10 | — | — | — | — | — | — | — | — |
| 7 | Ignition 11 | — | — | — | — | — | — | — | — |
| 8 | Ignition 12 | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital/VR 5 SHIELD | — | — | — | — | — | — | — | — |
| 10 | EGT 1 + | — | — | — | — | — | — | — | — |
| 11 | EGT 2 + | — | — | — | — | — | — | — | — |
| 12 | EGT 3 + | — | — | — | — | — | — | — | — |
| 13 | EGT 4 + | — | — | — | — | — | — | — | — |
| 14 | EGT 5 + | — | — | — | — | — | — | — | — |
| 15 | EGT 6 + | — | — | — | — | — | — | — | — |
| 16 | EGT 7 + | — | — | — | — | — | — | — | — |
| 17 | EGT 8 + | — | — | — | — | — | — | — | — |
| 18 | EGT 1 - | — | — | — | — | — | — | — | — |
| 19 | EGT 2 - | — | — | — | — | — | — | — | — |
| 2 | Digital/VR 5 SIGNAL - | — | — | — | — | — | — | — | — |
| 20 | EGT 3 - | — | — | — | — | — | — | — | — |
| 21 | EGT 4 - | — | — | — | — | — | — | — | — |
| 22 | EGT 5 - | — | — | — | — | — | — | — | — |
| 23 | EGT 6 - | — | — | — | — | — | — | — | — |
| 24 | EGT 7 - | — | — | — | — | — | — | — | — |
| 25 | EGT 8 - | — | — | — | — | — | — | — | — |
| 26 | Digital/VR 8 SHIELD | — | — | — | — | — | — | — | — |
| 27 | Digital/VR 8 SIGNAL - | — | — | — | — | — | — | — | — |
| 28 | Digital/VR 8 SIGNAL + | — | W58 | — | 0.5 | OEM-C85-1 | — | — | — |
| 29 | CAN 2 L | — | — | — | — | — | — | — | — |
| 3 | Digital/VR 5 SIGNAL + | — | W55 | — | 0.5 | OEM-C84-9 | — | — | — |
| 30 | CAN 2 H | — | — | — | — | — | — | — | — |
| 31 | INJECTOR 13 | — | — | — | — | — | — | — | — |
| 32 | INJECTOR 14 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 15 | — | — | — | — | — | — | — | — |
| 34 | INJECTOR 16 | — | — | — | — | — | — | — | — |
| 4 | Digital/VR 6 SHIELD | — | — | — | — | — | — | — | — |
| 5 | Digital/VR 6 SIGNAL - | — | — | — | — | — | — | — | — |
| 6 | Digital/VR 6 SIGNAL + | — | W56 | — | 0.5 | OEM-C84-15 | — | — | — |
| 7 | Digital/VR 7 SHIELD | — | — | — | — | — | — | — | — |
| 8 | Digital/VR 7 SIGNAL - | — | — | — | — | — | — | — | — |
| 9 | Digital/VR 7 SIGNAL + | — | W57 | — | 0.5 | OEM-C84-3 | — | — | — |
OEM-C84
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor supply +5V (VCC) | — | W17 | — | 0.5 | MAXXECUGEN2R-MX1-12 | — | — | — |
| 10 | Cam position 1 (G1) | — | W19 | — | 0.5 | MAXXECUGEN2R-MX1-18 | — | — | — |
| 11 | Cam 1 return (G1-) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | TRAC throttle position (VTA2) | — | W49 | — | 0.5 | MAXXECUGEN2R-MX1-29 | — | — | — |
| 13 | O2 sensor (OX1) | — | W50 | — | 0.5 | MAXXECUGEN2R-MX1-30 | — | — | — |
| 14 | Intake air temperature (THA) | — | W51 | — | 0.5 | MAXXECUGEN2R-MX2-4 | — | — | — |
| 15 | OD direct-clutch speed sensor (NCO+) | — | W56 | — | 0.5 | MAXXECUGEN2R-MX4-6 | — | — | — |
| 16 | Cam position 2 (G2) | — | — | — | — | — | — | — | — |
| 17 | Cam 2 return (G2-) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temperature (THW) | — | W34 | — | 0.5 | MAXXECUGEN2R-MX1-28 | — | — | — |
| 22 | Sensor ground (E2) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | OD direct-clutch speed sensor (NCO-) | — | W57 | — | 0.5 | MAXXECUGEN2R-MX4-9 | — | — | — |
| 4 | No.2 speed sensor (SP2-) | — | W54 | — | 0.5 | MAXXECUGEN2R-MX1-24 | — | — | — |
| 5 | Crank position (NE) | — | W18 | — | 0.5 | MAXXECUGEN2R-MX1-10 | — | — | — |
| 6 | Crank sensor return (NE-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Throttle position (VTA1) | — | W33 | — | 0.5 | MAXXECUGEN2R-MX1-27 | — | — | — |
| 8 | Manifold pressure (PIM) | — | W32 | — | 0.5 | MAXXECUGEN2R-MX1-26 | — | — | — |
| 9 | No.2 speed sensor (SP2+) | — | W55 | — | 0.5 | MAXXECUGEN2R-MX4-3 | — | — | — |
OEM-C85
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Slave engine speed (NEO) | — | W58 | — | 0.5 | MAXXECUGEN2R-MX4-28 | — | — | — |
| 10 | Fuel pump diagnostic (DI) | — | — | — | — | — | — | — | — |
| 11 | Slave TRAC throttle position (VTO2) | — | — | — | — | — | — | — | — |
| 14 | ABS active (MT only) | — | W64 | — | 0.5 | MAXXECUGEN2R-MX2-17 | — | — | — |
| 16 | Power ground (E1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | EFI main relay control (M-REL) | — | W35 | — | 0.5 | MAXXECUGEN2R-MX1-5 | — | — | — |
| 3 | Check-engine lamp (W) | — | W44 | — | 0.5 | MAXXECUGEN2R-MX2-33 | — | — | — |
| 4 | Fuel pump control (FPC) | — | W45 | — | 0.5 | MAXXECUGEN2R-MX2-34 | — | — | — |
| 5 | Diagnostic test 1 (TE1) | — | W59 | — | 0.5 | MAXXECUGEN2R-MX2-6 | — | — | — |
| 6 | Timing retard (TR) | — | W65 | — | 0.5 | MAXXECUGEN2R-MX2-22 | — | — | — |
| 7 | Slave throttle position (VTO1) | — | — | — | — | — | — | — | — |
OEM-C86
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Diagnostic test terminal (TT) | — | W66 | — | 0.5 | MAXXECUGEN2R-MX2-23 | — | — | — |
| 10 | A/T 2nd-gear indicator (2) | — | W61 | — | 0.5 | MAXXECUGEN2R-MX2-14 | — | — | — |
| 11 | Diagnostic test 2 (TE2) | — | W62 | — | 0.5 | MAXXECUGEN2R-MX2-15 | — | — | — |
| 12 | No.1 speed sensor (SP1) | — | W53 | — | 0.5 | MAXXECUGEN2R-MX1-23 | — | — | — |
| 13 | Cat temperature sensor (CCO) | — | W52 | — | 0.5 | MAXXECUGEN2R-MX2-5 | — | — | — |
| 14 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 17 | A/T throttle position (L3) | — | W67 | — | 0.5 | MAXXECUGEN2R-MX2-32 | — | — | — |
| 18 | A/T throttle position (L2) | — | W68 | — | 0.5 | MAXXECUGEN2R-MX3-21 | — | — | — |
| 19 | A/T throttle position (L1) | — | W69 | — | 0.5 | MAXXECUGEN2R-MX3-22 | — | — | — |
| 2 | A/T low-gear indicator (L) | — | W70 | — | 0.5 | MAXXECUGEN2R-MX3-23 | — | — | — |
| 20 | A/C request (A/C) | — | W71 | — | 0.5 | MAXXECUGEN2R-MX3-24 | — | — | — |
| 22 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 23 | EFI main relay power (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 25 | Stop light switch (STP) | — | W72 | — | 0.5 | MAXXECUGEN2R-MX3-25 | — | — | — |
| 28 | Electrical load sense (ELS) | — | W73 | — | 0.5 | MAXXECUGEN2R-MX3-26 | — | — | — |
| 3 | A/T power/normal mode (P) | — | W74 | — | 0.5 | MAXXECUGEN2R-MX3-27 | — | — | — |
| 5 | A/C clutch relay (ACMG) | — | W36 | — | 0.5 | MAXXECUGEN2R-MX1-6 | — | — | — |
| 6 | A/T overdrive disable 2 (OD2) | — | W63 | — | 0.5 | MAXXECUGEN2R-MX2-16 | — | — | — |
| 7 | A/T overdrive disable 1 (OD1) | — | W60 | — | 0.5 | MAXXECUGEN2R-MX2-13 | — | — | — |
| 8 | Cat temp warning light (EGW) | — | W46 | — | 0.5 | MAXXECUGEN2R-MX3-29 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W31 | — | 0.5 | MAXXECUGEN2R-MX2-24 | — | — | — |
OEM-C88
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Injector 1 (#10, cyl 1&4) | — | W28 | — | 0.5 | MAXXECUGEN2R-MX1-31 | — | — | — |
| 11 | A/T shift solenoid 1 (S1) | — | W38 | — | 0.5 | MAXXECUGEN2R-MX1-7 | — | — | — |
| 12 | Igniter feedback (IGF) | — | — | — | — | — | — | — | — |
| 13 | Starter signal (STA) | — | W75 | — | 0.5 | MAXXECUGEN2R-MX3-28 | — | — | — |
| 14 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 15 | Ignition 3 (IGT3) | — | W24 | — | 0.5 | MAXXECUGEN2R-MX1-3 | — | — | — |
| 16 | Ignition 2 (IGT2) | — | W23 | — | 0.5 | MAXXECUGEN2R-MX1-2 | — | — | — |
| 17 | A/T shift solenoid 2 (S2) | — | W40 | — | 0.5 | MAXXECUGEN2R-MX1-17 | — | — | — |
| 19 | Voltage feedback (VF) | — | — | — | — | — | — | — | — |
| 20 | ISC stepper coil 4 (ISCV4) | — | W43 | — | 0.5 | MAXXECUGEN2R-MX1-34 | — | — | — |
| 21 | ISC stepper coil 3 (ISCV3) | — | W42 | — | 0.5 | MAXXECUGEN2R-MX3-12 | — | — | — |
| 22 | ISC stepper coil 2 (ISCV2) | — | W41 | — | 0.5 | MAXXECUGEN2R-MX2-3 | — | — | — |
| 23 | ISC stepper coil 1 (ISCV1) | — | W39 | — | 0.5 | MAXXECUGEN2R-MX1-8 | — | — | — |
| 24 | Ignition 1 (IGT1) | — | W22 | — | 0.5 | MAXXECUGEN2R-MX1-1 | — | — | — |
| 26 | Ignition 4 (IGT4) | — | W25 | — | 0.5 | MAXXECUGEN2R-MX1-4 | — | — | — |
| 27 | A/T lock-up solenoid (S3) | — | W47 | — | 0.5 | MAXXECUGEN2R-MX3-30 | — | — | — |
| 28 | Power ground (E11) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Ignition 6 (IGT6) | — | W27 | — | 0.5 | MAXXECUGEN2R-MX2-2 | — | — | — |
| 3 | O2 heater (HT) | — | W37 | — | 0.5 | MAXXECUGEN2R-MX2-12 | — | — | — |
| 30 | Ignition 5 (IGT5) | — | W26 | — | 0.5 | MAXXECUGEN2R-MX2-1 | — | — | — |
| 31 | TRAC throttle idle switch (IDL2) | — | — | — | — | — | — | — | — |
| 32 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 33 | Power ground (E02) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power ground (E01) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Knock sensor 2 (KNK2, rear) | — | W21 | — | 0.5 | MAXXECUGEN2R-MX2-31 | — | — | — |
| 5 | Knock sensor 1 (KNK1, front) | — | W20 | — | 0.5 | MAXXECUGEN2R-MX2-28 | — | — | — |
| 7 | EVAP purge VSV | — | W48 | — | 0.5 | MAXXECUGEN2R-MX3-31 | — | — | — |
| 8 | Injector 3 (#30, cyl 2&6) | — | W30 | — | 0.5 | MAXXECUGEN2R-MX1-33 | — | — | — |
| 9 | Injector 2 (#20, cyl 3&5) | — | W29 | — | 0.5 | MAXXECUGEN2R-MX1-32 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W12 | — | 0.5 | OEM-C84-11 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-C84-17 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-C84-22 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-C84-6 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | MAXXECUGEN2R-MX1-14 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C86-22 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C86-23 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUGEN2R-MX1-25 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MAXXECUGEN2R-MX2-25 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-C85-16 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-C88-28 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-C88-33 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-C88-34 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MAXXECUGEN2R-MX1-9 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MAXXECUGEN2R-MX2-9 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | MAXXECUGEN2R-MX3-9 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C84-1 | Sensor supply +5V (VCC) | vref | MAXXECUGEN2R-MX1-12 | Digital/VR 1 POWER SUPPLY | vref | single_source | |
| OEM-C84-10 | Cam position 1 (G1) | trigger_in | MAXXECUGEN2R-MX1-18 | Digital/VR 2 SIGNAL + | trigger_in | single_source | |
| OEM-C84-11 | Cam 1 return (G1-) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-C84-12 | TRAC throttle position (VTA2) | analog_in | MAXXECUGEN2R-MX1-29 | AIN 4 | analog_in | single_source | |
| OEM-C84-13 | O2 sensor (OX1) | lambda_nb_in | MAXXECUGEN2R-MX1-30 | AIN 5 | analog_in | single_source | |
| OEM-C84-14 | Intake air temperature (THA) | temp_in | MAXXECUGEN2R-MX2-4 | AIN 6 | analog_in | single_source | |
| OEM-C84-15 | OD direct-clutch speed sensor (NCO+) | digital_in | MAXXECUGEN2R-MX4-6 | Digital/VR 6 SIGNAL + | digital_in | single_source | |
| OEM-C84-16 | Cam position 2 (G2) | trigger_in | — | — | — | single_source | |
| OEM-C84-17 | Cam 2 return (G2-) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-C84-20 | Coolant temperature (THW) | temp_in | MAXXECUGEN2R-MX1-28 | AIN 3 | analog_in | single_source | |
| OEM-C84-22 | Sensor ground (E2) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-C84-3 | OD direct-clutch speed sensor (NCO-) | digital_in | MAXXECUGEN2R-MX4-9 | Digital/VR 7 SIGNAL + | digital_in | single_source | |
| OEM-C84-4 | No.2 speed sensor (SP2-) | digital_in | MAXXECUGEN2R-MX1-24 | Digital/VR 4 SIGNAL + | digital_in | single_source | |
| OEM-C84-5 | Crank position (NE) | trigger_in | MAXXECUGEN2R-MX1-10 | Digital/VR 1 SIGNAL + | trigger_in | single_source | |
| OEM-C84-6 | Crank sensor return (NE-) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-C84-7 | Throttle position (VTA1) | analog_in | MAXXECUGEN2R-MX1-27 | AIN 2 | analog_in | single_source | |
| OEM-C84-8 | Manifold pressure (PIM) | analog_in | MAXXECUGEN2R-MX1-26 | AIN 1 | analog_in | single_source | |
| OEM-C84-9 | No.2 speed sensor (SP2+) | digital_in | MAXXECUGEN2R-MX4-3 | Digital/VR 5 SIGNAL + | digital_in | single_source | |
| OEM-C85-1 | Slave engine speed (NEO) | digital_in | MAXXECUGEN2R-MX4-28 | Digital/VR 8 SIGNAL + | digital_in | single_source | |
| OEM-C85-10 | Fuel pump diagnostic (DI) | digital_in | — | — | — | single_source | |
| OEM-C85-11 | Slave TRAC throttle position (VTO2) | analog_out | — | — | — | single_source | |
| OEM-C85-14 | ABS active (MT only) | digital_in | MAXXECUGEN2R-MX2-17 | AIN 13 | analog_in | single_source | |
| OEM-C85-16 | Power ground (E1) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-C85-2 | EFI main relay control (M-REL) | low_side_out | MAXXECUGEN2R-MX1-5 | GP out 1 (GND) | low_side_out | single_source | |
| OEM-C85-3 | Check-engine lamp (W) | low_side_out | MAXXECUGEN2R-MX2-33 | INJECTOR 5 | injector_out | single_source | |
| OEM-C85-4 | Fuel pump control (FPC) | low_side_out | MAXXECUGEN2R-MX2-34 | INJECTOR 6 | injector_out | single_source | |
| OEM-C85-5 | Diagnostic test 1 (TE1) | digital_in | MAXXECUGEN2R-MX2-6 | AIN 8 | analog_in | single_source | |
| OEM-C85-6 | Timing retard (TR) | digital_in | MAXXECUGEN2R-MX2-22 | AIN 14 | analog_in | single_source | |
| OEM-C85-7 | Slave throttle position (VTO1) | analog_out | — | — | — | single_source | |
| OEM-C86-1 | Diagnostic test terminal (TT) | digital_in | MAXXECUGEN2R-MX2-23 | AIN 15 | analog_in | single_source | |
| OEM-C86-10 | A/T 2nd-gear indicator (2) | digital_in | MAXXECUGEN2R-MX2-14 | AIN 10 | analog_in | single_source | |
| OEM-C86-11 | Diagnostic test 2 (TE2) | digital_in | MAXXECUGEN2R-MX2-15 | AIN 11 | analog_in | single_source | |
| OEM-C86-12 | No.1 speed sensor (SP1) | digital_in | MAXXECUGEN2R-MX1-23 | Digital/VR 3 SIGNAL + | digital_in | single_source | |
| OEM-C86-13 | Cat temperature sensor (CCO) | temp_in | MAXXECUGEN2R-MX2-5 | AIN 7 | analog_in | single_source | |
| OEM-C86-14 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-C86-17 | A/T throttle position (L3) | digital_in | MAXXECUGEN2R-MX2-32 | AIN 16 | analog_in | single_source | |
| OEM-C86-18 | A/T throttle position (L2) | digital_in | MAXXECUGEN2R-MX3-21 | AIN 17 | analog_in | single_source | |
| OEM-C86-19 | A/T throttle position (L1) | digital_in | MAXXECUGEN2R-MX3-22 | AIN 18 | analog_in | single_source | |
| OEM-C86-2 | A/T low-gear indicator (L) | digital_in | MAXXECUGEN2R-MX3-23 | AIN 19 | analog_in | single_source | |
| OEM-C86-20 | A/C request (A/C) | digital_in | MAXXECUGEN2R-MX3-24 | AIN 20 | analog_in | single_source | |
| OEM-C86-22 | EFI main relay power (+B) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-C86-23 | EFI main relay power (+B1) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-C86-25 | Stop light switch (STP) | digital_in | MAXXECUGEN2R-MX3-25 | AIN 21 | analog_in | single_source | |
| OEM-C86-28 | Electrical load sense (ELS) | digital_in | MAXXECUGEN2R-MX3-26 | AIN 22 | analog_in | single_source | |
| OEM-C86-3 | A/T power/normal mode (P) | digital_in | MAXXECUGEN2R-MX3-27 | AIN 23 | analog_in | single_source | |
| OEM-C86-5 | A/C clutch relay (ACMG) | low_side_out | MAXXECUGEN2R-MX1-6 | GP out 2 (GND) | low_side_out | single_source | |
| OEM-C86-6 | A/T overdrive disable 2 (OD2) | digital_in | MAXXECUGEN2R-MX2-16 | AIN 12 | analog_in | single_source | |
| OEM-C86-7 | A/T overdrive disable 1 (OD1) | digital_in | MAXXECUGEN2R-MX2-13 | AIN 9 | analog_in | single_source | |
| OEM-C86-8 | Cat temp warning light (EGW) | low_side_out | MAXXECUGEN2R-MX3-29 | INJECTOR 7 | injector_out | single_source | |
| OEM-C86-9 | Ignition switch (IGSW) | digital_in | MAXXECUGEN2R-MX2-24 | 12V supply 3 | digital_in | single_source | |
| OEM-C88-10 | Injector 1 (#10, cyl 1&4) | injector_out | MAXXECUGEN2R-MX1-31 | INJECTOR 1 | injector_out | single_source | |
| OEM-C88-11 | A/T shift solenoid 1 (S1) | low_side_out | MAXXECUGEN2R-MX1-7 | GP out 3 (GND) | low_side_out | single_source | |
| OEM-C88-12 | Igniter feedback (IGF) | digital_in | — | — | — | single_source | |
| OEM-C88-13 | Starter signal (STA) | digital_in | MAXXECUGEN2R-MX3-28 | AIN 24 | analog_in | single_source | |
| OEM-C88-14 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-C88-15 | Ignition 3 (IGT3) | ignition_out | MAXXECUGEN2R-MX1-3 | Ignition 3 | ignition_out | single_source | |
| OEM-C88-16 | Ignition 2 (IGT2) | ignition_out | MAXXECUGEN2R-MX1-2 | Ignition 2 | ignition_out | single_source | |
| OEM-C88-17 | A/T shift solenoid 2 (S2) | low_side_out | MAXXECUGEN2R-MX1-17 | GP out 5 (GND) | low_side_out | single_source | |
| OEM-C88-19 | Voltage feedback (VF) | analog_out | — | — | — | single_source | |
| OEM-C88-20 | ISC stepper coil 4 (ISCV4) | low_side_out | MAXXECUGEN2R-MX1-34 | INJECTOR 4 | injector_out | single_source | |
| OEM-C88-21 | ISC stepper coil 3 (ISCV3) | low_side_out | MAXXECUGEN2R-MX3-12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | low_side_out | single_source | |
| OEM-C88-22 | ISC stepper coil 2 (ISCV2) | low_side_out | MAXXECUGEN2R-MX2-3 | GP out 6 (GND) | low_side_out | single_source | |
| OEM-C88-23 | ISC stepper coil 1 (ISCV1) | low_side_out | MAXXECUGEN2R-MX1-8 | GP out 4 (GND) | low_side_out | single_source | |
| OEM-C88-24 | Ignition 1 (IGT1) | ignition_out | MAXXECUGEN2R-MX1-1 | Ignition 1 | ignition_out | single_source | |
| OEM-C88-26 | Ignition 4 (IGT4) | ignition_out | MAXXECUGEN2R-MX1-4 | Ignition 4 | ignition_out | single_source | |
| OEM-C88-27 | A/T lock-up solenoid (S3) | low_side_out | MAXXECUGEN2R-MX3-30 | INJECTOR 8 | injector_out | single_source | |
| OEM-C88-28 | Power ground (E11) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-C88-29 | Ignition 6 (IGT6) | ignition_out | MAXXECUGEN2R-MX2-2 | Ignition 6 | ignition_out | single_source | |
| OEM-C88-3 | O2 heater (HT) | low_side_out | MAXXECUGEN2R-MX2-12 | GP OUT 7 / WBO2 Sensor 1 H- | low_side_out | single_source | |
| OEM-C88-30 | Ignition 5 (IGT5) | ignition_out | MAXXECUGEN2R-MX2-1 | Ignition 5 | ignition_out | single_source | |
| OEM-C88-31 | TRAC throttle idle switch (IDL2) | digital_in | — | — | — | single_source | |
| OEM-C88-32 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-C88-33 | Power ground (E02) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-C88-34 | Power ground (E01) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-C88-4 | Knock sensor 2 (KNK2, rear) | knock_in | MAXXECUGEN2R-MX2-31 | KNOCK 2+ | knock_in | single_source | |
| OEM-C88-5 | Knock sensor 1 (KNK1, front) | knock_in | MAXXECUGEN2R-MX2-28 | KNOCK 1+ | knock_in | single_source | |
| OEM-C88-7 | EVAP purge VSV | low_side_out | MAXXECUGEN2R-MX3-31 | INJECTOR 9 | injector_out | single_source | |
| OEM-C88-8 | Injector 3 (#30, cyl 2&6) | injector_out | MAXXECUGEN2R-MX1-33 | INJECTOR 3 | injector_out | single_source | |
| OEM-C88-9 | Injector 2 (#20, cyl 3&5) | injector_out | MAXXECUGEN2R-MX1-32 | INJECTOR 2 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B1) | — | |
| W3 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | no route | 12V supply 1 | — | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | no route | 12V supply 2 | — | |
| W5 | OEM-C85-16 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W6 | OEM-C88-28 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W7 | OEM-C88-33 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W8 | OEM-C88-34 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W9 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | no route | Engine gnd | — | |
| W10 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | no route | Engine gnd | — | |
| W11 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | no route | Engine gnd | — | |
| W12 | OEM-C84-11 | SP-0V-1 | 0.5 | no route | Cam 1 return (G1-) | — | |
| W13 | OEM-C84-17 | SP-0V-1 | 0.5 | no route | Cam 2 return (G2-) | — | |
| W14 | OEM-C84-22 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W15 | OEM-C84-6 | SP-0V-1 | 0.5 | no route | Crank sensor return (NE-) | — | |
| W16 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | no route | SENSOR GND | — | |
| W17 | OEM-C84-1 | MAXXECUGEN2R-MX1-12 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W18 | OEM-C84-5 | MAXXECUGEN2R-MX1-10 | 0.5 | no route | Crank position (NE) | — | |
| W19 | OEM-C84-10 | MAXXECUGEN2R-MX1-18 | 0.5 | no route | Cam position 1 (G1) | — | |
| W20 | OEM-C88-5 | MAXXECUGEN2R-MX2-28 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W21 | OEM-C88-4 | MAXXECUGEN2R-MX2-31 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W22 | OEM-C88-24 | MAXXECUGEN2R-MX1-1 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W23 | OEM-C88-16 | MAXXECUGEN2R-MX1-2 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W24 | OEM-C88-15 | MAXXECUGEN2R-MX1-3 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W25 | OEM-C88-26 | MAXXECUGEN2R-MX1-4 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W26 | OEM-C88-30 | MAXXECUGEN2R-MX2-1 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W27 | OEM-C88-29 | MAXXECUGEN2R-MX2-2 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W28 | OEM-C88-10 | MAXXECUGEN2R-MX1-31 | 0.5 | no route | Injector 1 (#10, cyl 1&4) | — | |
| W29 | OEM-C88-9 | MAXXECUGEN2R-MX1-32 | 0.5 | no route | Injector 2 (#20, cyl 3&5) | — | |
| W30 | OEM-C88-8 | MAXXECUGEN2R-MX1-33 | 0.5 | no route | Injector 3 (#30, cyl 2&6) | — | |
| W31 | OEM-C86-9 | MAXXECUGEN2R-MX2-24 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W32 | OEM-C84-8 | MAXXECUGEN2R-MX1-26 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W33 | OEM-C84-7 | MAXXECUGEN2R-MX1-27 | 0.5 | no route | Throttle position (VTA1) | — | |
| W34 | OEM-C84-20 | MAXXECUGEN2R-MX1-28 | 0.5 | no route | Coolant temperature (THW) | — | |
| W35 | OEM-C85-2 | MAXXECUGEN2R-MX1-5 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W36 | OEM-C86-5 | MAXXECUGEN2R-MX1-6 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W37 | OEM-C88-3 | MAXXECUGEN2R-MX2-12 | 0.5 | no route | O2 heater (HT) | — | |
| W38 | OEM-C88-11 | MAXXECUGEN2R-MX1-7 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W39 | OEM-C88-23 | MAXXECUGEN2R-MX1-8 | 0.5 | no route | ISC stepper coil 1 (ISCV1) | — | |
| W40 | OEM-C88-17 | MAXXECUGEN2R-MX1-17 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W41 | OEM-C88-22 | MAXXECUGEN2R-MX2-3 | 0.5 | no route | ISC stepper coil 2 (ISCV2) | — | |
| W42 | OEM-C88-21 | MAXXECUGEN2R-MX3-12 | 0.5 | no route | ISC stepper coil 3 (ISCV3) | — | |
| W43 | OEM-C88-20 | MAXXECUGEN2R-MX1-34 | 0.5 | no route | ISC stepper coil 4 (ISCV4) | — | |
| W44 | OEM-C85-3 | MAXXECUGEN2R-MX2-33 | 0.5 | no route | Check-engine lamp (W) | — | |
| W45 | OEM-C85-4 | MAXXECUGEN2R-MX2-34 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W46 | OEM-C86-8 | MAXXECUGEN2R-MX3-29 | 0.5 | no route | Cat temp warning light (EGW) | — | |
| W47 | OEM-C88-27 | MAXXECUGEN2R-MX3-30 | 0.5 | no route | A/T lock-up solenoid (S3) | — | |
| W48 | OEM-C88-7 | MAXXECUGEN2R-MX3-31 | 0.5 | no route | EVAP purge VSV | — | |
| W49 | OEM-C84-12 | MAXXECUGEN2R-MX1-29 | 0.5 | no route | TRAC throttle position (VTA2) | — | |
| W50 | OEM-C84-13 | MAXXECUGEN2R-MX1-30 | 0.5 | no route | O2 sensor (OX1) | — | |
| W51 | OEM-C84-14 | MAXXECUGEN2R-MX2-4 | 0.5 | no route | Intake air temperature (THA) | — | |
| W52 | OEM-C86-13 | MAXXECUGEN2R-MX2-5 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W53 | OEM-C86-12 | MAXXECUGEN2R-MX1-23 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W54 | OEM-C84-4 | MAXXECUGEN2R-MX1-24 | 0.5 | no route | No.2 speed sensor (SP2-) | — | |
| W55 | OEM-C84-9 | MAXXECUGEN2R-MX4-3 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W56 | OEM-C84-15 | MAXXECUGEN2R-MX4-6 | 0.5 | no route | OD direct-clutch speed sensor (NCO+) | — | |
| W57 | OEM-C84-3 | MAXXECUGEN2R-MX4-9 | 0.5 | no route | OD direct-clutch speed sensor (NCO-) | — | |
| W58 | OEM-C85-1 | MAXXECUGEN2R-MX4-28 | 0.5 | no route | Slave engine speed (NEO) | — | |
| W59 | OEM-C85-5 | MAXXECUGEN2R-MX2-6 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W60 | OEM-C86-7 | MAXXECUGEN2R-MX2-13 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W61 | OEM-C86-10 | MAXXECUGEN2R-MX2-14 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W62 | OEM-C86-11 | MAXXECUGEN2R-MX2-15 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W63 | OEM-C86-6 | MAXXECUGEN2R-MX2-16 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W64 | OEM-C85-14 | MAXXECUGEN2R-MX2-17 | 0.5 | no route | ABS active (MT only) | — | |
| W65 | OEM-C85-6 | MAXXECUGEN2R-MX2-22 | 0.5 | no route | Timing retard (TR) | — | |
| W66 | OEM-C86-1 | MAXXECUGEN2R-MX2-23 | 0.5 | no route | Diagnostic test terminal (TT) | — | |
| W67 | OEM-C86-17 | MAXXECUGEN2R-MX2-32 | 0.5 | no route | A/T throttle position (L3) | — | |
| W68 | OEM-C86-18 | MAXXECUGEN2R-MX3-21 | 0.5 | no route | A/T throttle position (L2) | — | |
| W69 | OEM-C86-19 | MAXXECUGEN2R-MX3-22 | 0.5 | no route | A/T throttle position (L1) | — | |
| W70 | OEM-C86-2 | MAXXECUGEN2R-MX3-23 | 0.5 | no route | A/T low-gear indicator (L) | — | |
| W71 | OEM-C86-20 | MAXXECUGEN2R-MX3-24 | 0.5 | no route | A/C request (A/C) | — | |
| W72 | OEM-C86-25 | MAXXECUGEN2R-MX3-25 | 0.5 | no route | Stop light switch (STP) | — | |
| W73 | OEM-C86-28 | MAXXECUGEN2R-MX3-26 | 0.5 | no route | Electrical load sense (ELS) | — | |
| W74 | OEM-C86-3 | MAXXECUGEN2R-MX3-27 | 0.5 | no route | A/T power/normal mode (P) | — | |
| W75 | OEM-C88-13 | MAXXECUGEN2R-MX3-28 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (28)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-C84-16 | Required OEM function "Cam position 2 (G2)" (trigger_in) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-C85-14 ↔ MAXXECUGEN2R-MX2-17 | OEM-C85-14 "ABS active (MT only)" [digital_in] is wired to MAXXECUGEN2R-MX2-17 "AIN 13" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-5 ↔ MAXXECUGEN2R-MX2-6 | OEM-C85-5 "Diagnostic test 1 (TE1)" [digital_in] is wired to MAXXECUGEN2R-MX2-6 "AIN 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-6 ↔ MAXXECUGEN2R-MX2-22 | OEM-C85-6 "Timing retard (TR)" [digital_in] is wired to MAXXECUGEN2R-MX2-22 "AIN 14" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-1 ↔ MAXXECUGEN2R-MX2-23 | OEM-C86-1 "Diagnostic test terminal (TT)" [digital_in] is wired to MAXXECUGEN2R-MX2-23 "AIN 15" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-10 ↔ MAXXECUGEN2R-MX2-14 | OEM-C86-10 "A/T 2nd-gear indicator (2)" [digital_in] is wired to MAXXECUGEN2R-MX2-14 "AIN 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-11 ↔ MAXXECUGEN2R-MX2-15 | OEM-C86-11 "Diagnostic test 2 (TE2)" [digital_in] is wired to MAXXECUGEN2R-MX2-15 "AIN 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-17 ↔ MAXXECUGEN2R-MX2-32 | OEM-C86-17 "A/T throttle position (L3)" [digital_in] is wired to MAXXECUGEN2R-MX2-32 "AIN 16" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-18 ↔ MAXXECUGEN2R-MX3-21 | OEM-C86-18 "A/T throttle position (L2)" [digital_in] is wired to MAXXECUGEN2R-MX3-21 "AIN 17" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-19 ↔ MAXXECUGEN2R-MX3-22 | OEM-C86-19 "A/T throttle position (L1)" [digital_in] is wired to MAXXECUGEN2R-MX3-22 "AIN 18" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-2 ↔ MAXXECUGEN2R-MX3-23 | OEM-C86-2 "A/T low-gear indicator (L)" [digital_in] is wired to MAXXECUGEN2R-MX3-23 "AIN 19" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-20 ↔ MAXXECUGEN2R-MX3-24 | OEM-C86-20 "A/C request (A/C)" [digital_in] is wired to MAXXECUGEN2R-MX3-24 "AIN 20" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-25 ↔ MAXXECUGEN2R-MX3-25 | OEM-C86-25 "Stop light switch (STP)" [digital_in] is wired to MAXXECUGEN2R-MX3-25 "AIN 21" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-28 ↔ MAXXECUGEN2R-MX3-26 | OEM-C86-28 "Electrical load sense (ELS)" [digital_in] is wired to MAXXECUGEN2R-MX3-26 "AIN 22" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-3 ↔ MAXXECUGEN2R-MX3-27 | OEM-C86-3 "A/T power/normal mode (P)" [digital_in] is wired to MAXXECUGEN2R-MX3-27 "AIN 23" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-6 ↔ MAXXECUGEN2R-MX2-16 | OEM-C86-6 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to MAXXECUGEN2R-MX2-16 "AIN 12" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-7 ↔ MAXXECUGEN2R-MX2-13 | OEM-C86-7 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to MAXXECUGEN2R-MX2-13 "AIN 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C88-13 ↔ MAXXECUGEN2R-MX3-28 | OEM-C88-13 "Starter signal (STA)" [digital_in] is wired to MAXXECUGEN2R-MX3-28 "AIN 24" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-C84-14 ↔ MAXXECUGEN2R-MX2-4 | OEM-C84-14 "Intake air temperature (THA)" [temp_in] is wired to MAXXECUGEN2R-MX2-4 "AIN 6" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C84-20 ↔ MAXXECUGEN2R-MX1-28 | OEM-C84-20 "Coolant temperature (THW)" [temp_in] is wired to MAXXECUGEN2R-MX1-28 "AIN 3" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C85-3 ↔ MAXXECUGEN2R-MX2-33 | OEM-C85-3 "Check-engine lamp (W)" [low_side_out] is wired to MAXXECUGEN2R-MX2-33 "INJECTOR 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C85-4 ↔ MAXXECUGEN2R-MX2-34 | OEM-C85-4 "Fuel pump control (FPC)" [low_side_out] is wired to MAXXECUGEN2R-MX2-34 "INJECTOR 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C86-13 ↔ MAXXECUGEN2R-MX2-5 | OEM-C86-13 "Cat temperature sensor (CCO)" [temp_in] is wired to MAXXECUGEN2R-MX2-5 "AIN 7" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C86-8 ↔ MAXXECUGEN2R-MX3-29 | OEM-C86-8 "Cat temp warning light (EGW)" [low_side_out] is wired to MAXXECUGEN2R-MX3-29 "INJECTOR 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-20 ↔ MAXXECUGEN2R-MX1-34 | OEM-C88-20 "ISC stepper coil 4 (ISCV4)" [low_side_out] is wired to MAXXECUGEN2R-MX1-34 "INJECTOR 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-27 ↔ MAXXECUGEN2R-MX3-30 | OEM-C88-27 "A/T lock-up solenoid (S3)" [low_side_out] is wired to MAXXECUGEN2R-MX3-30 "INJECTOR 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-7 ↔ MAXXECUGEN2R-MX3-31 | OEM-C88-7 "EVAP purge VSV" [low_side_out] is wired to MAXXECUGEN2R-MX3-31 "INJECTOR 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-C85-10 Fuel pump diagnostic (DI); OEM-C85-11 Slave TRAC throttle position (VTO2); OEM-C85-7 Slave throttle position (VTO1); OEM-C88-12 Igniter feedback (IGF); OEM-C88-14 Neutral/park switch (NSW); OEM-C88-19 Voltage feedback (VF); OEM-C88-31 TRAC throttle idle switch (IDL2); OEM-C88-32 TPS idle switch (IDL1) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-C86-14 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Toyota 1JZ-GTE not found in the ECU's docs (no named 1JZ entry in the trigger list) Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-C84 16: Cam position 2 (G2): no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU GEN2 RACE Not wired: - OEM-C86 14: Battery constant (BATT): MaxxECU MaxxECU GEN2 RACE has no battery-constant input; not needed - OEM-C85 10: Fuel pump diagnostic (DI): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-C88 12: Igniter feedback (IGF): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-C88 14: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU GEN2 RACE - OEM-C88 31: TRAC throttle idle switch (IDL2): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU GEN2 RACE - OEM-C88 32: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU GEN2 RACE - OEM-C85 11: Slave TRAC throttle position (VTO2): no free analog_out on MaxxECU MaxxECU GEN2 RACE - OEM-C85 7: Slave throttle position (VTO1): no free analog_out on MaxxECU MaxxECU GEN2 RACE - OEM-C88 19: Voltage feedback (VF): no free analog_out on MaxxECU MaxxECU GEN2 RACE
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MaxxECU GEN2 pinout (RACE MX1–MX4 / TRACK MX1–MX3) | http://www.maxxecu.com/webhelp/wirings-maxxecu_gen2_pinout.html | archive | 2026-10-05 | f689b8b6b08f |
| 2 | community_copy | wilbo666: 1JZ-GTE pinout (JZZ30 Soarer page, shared 1JZ-GTE engine/ECU) | http://wilbo666.pbworks.com/w/page/47216384/1JZ-GTE%20JZZ30%20Soarer | — | — | — |