Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) → rusEFI Proteus (auto)
Toyota Mark II JZX90 1992-96 (1JZ-GTE, non-VVT) — rusEFI — Proteus
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 77 wires · 10 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-C85-16 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C88-28 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C88-33 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C88-34 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-C84-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-C84-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-C84-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-C84-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C84-1 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C84-5 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C84-10 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C84-16 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C88-5 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C88-4 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C88-24 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C88-16 | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C88-15 | PROTEUS-Black35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C88-26 | PROTEUS-Black35-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C88-30 | PROTEUS-Black35-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C88-29 | PROTEUS-Black35-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C88-10 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-C88-9 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C88-8 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C86-9 | PROTEUS-Black23-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C84-8 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C84-7 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C84-20 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C85-2 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C86-5 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C88-3 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C88-11 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C88-23 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C88-17 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C88-22 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C88-21 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C88-20 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C85-3 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C85-4 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C86-8 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C88-27 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-C84-12 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-C84-13 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-C84-14 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C86-13 | PROTEUS-White35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C86-12 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C84-4 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-C84-9 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-C84-15 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-C84-3 | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-C85-5 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-C86-7 | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-C86-10 | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-C86-11 | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-C86-6 | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-C85-14 | PROTEUS-White35-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-C85-6 | PROTEUS-White35-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-White35-10 | PROTEUS-Black23-12 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | PROTEUS-Black23-12 | PROTEUS-Black23-23 | open (OL) | sensor ground must not touch +12 V supply | |
| 3 | PROTEUS-Black23-14 | PROTEUS-Black23-23 | open (OL) | power ground must not touch +12 V supply | |
| 4 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-White35-10 | PROTEUS-Black23-23 | open (OL) | 5 V sensor reference must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-C84
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor supply +5V (VCC) | — | W28 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| 10 | Cam position 1 (G1) | — | W31 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 11 | Cam 1 return (G1-) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | TRAC throttle position (VTA2) | — | W62 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 13 | O2 sensor (OX1) | — | W63 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 14 | Intake air temperature (THA) | — | W64 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 15 | OD direct-clutch speed sensor (NCO+) | — | W69 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| 16 | Cam position 2 (G2) | — | W33 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 17 | Cam 2 return (G2-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temperature (THW) | — | W48 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 22 | Sensor ground (E2) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | OD direct-clutch speed sensor (NCO-) | — | W70 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| 4 | No.2 speed sensor (SP2-) | — | W67 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 5 | Crank position (NE) | — | W29 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 6 | Crank sensor return (NE-) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Throttle position (VTA1) | — | W47 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 8 | Manifold pressure (PIM) | — | W46 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| 9 | No.2 speed sensor (SP2+) | — | W68 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
OEM-C85
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Slave engine speed (NEO) | — | — | — | — | — | — | — | — |
| 10 | Fuel pump diagnostic (DI) | — | — | — | — | — | — | — | — |
| 11 | Slave TRAC throttle position (VTO2) | — | — | — | — | — | — | — | — |
| 14 | ABS active (MT only) | — | W76 | — | 0.5 | PROTEUS-White35-28 | — | — | — |
| 16 | Power ground (E1) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | EFI main relay control (M-REL) | — | W49 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 3 | Check-engine lamp (W) | — | W58 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 4 | Fuel pump control (FPC) | — | W59 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 5 | Diagnostic test 1 (TE1) | — | W71 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| 6 | Timing retard (TR) | — | W77 | — | 0.5 | PROTEUS-White35-18 | — | — | — |
| 7 | Slave throttle position (VTO1) | — | — | — | — | — | — | — | — |
OEM-C86
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Diagnostic test terminal (TT) | — | — | — | — | — | — | — | — |
| 10 | A/T 2nd-gear indicator (2) | — | W73 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| 11 | Diagnostic test 2 (TE2) | — | W74 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
| 12 | No.1 speed sensor (SP1) | — | W66 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 13 | Cat temperature sensor (CCO) | — | W65 | — | 0.5 | PROTEUS-White35-19 | — | — | — |
| 14 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 17 | A/T throttle position (L3) | — | — | — | — | — | — | — | — |
| 18 | A/T throttle position (L2) | — | — | — | — | — | — | — | — |
| 19 | A/T throttle position (L1) | — | — | — | — | — | — | — | — |
| 2 | A/T low-gear indicator (L) | — | — | — | — | — | — | — | — |
| 20 | A/C request (A/C) | — | — | — | — | — | — | — | — |
| 22 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 23 | EFI main relay power (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 25 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 28 | Electrical load sense (ELS) | — | — | — | — | — | — | — | — |
| 3 | A/T power/normal mode (P) | — | — | — | — | — | — | — | — |
| 5 | A/C clutch relay (ACMG) | — | W50 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 6 | A/T overdrive disable 2 (OD2) | — | W75 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
| 7 | A/T overdrive disable 1 (OD1) | — | W72 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| 8 | Cat temp warning light (EGW) | — | W60 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W45 | — | 0.5 | PROTEUS-Black23-18 | — | — | — |
OEM-C88
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Injector 1 (#10, cyl 1&4) | — | W42 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 11 | A/T shift solenoid 1 (S1) | — | W52 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 12 | Igniter feedback (IGF) | — | — | — | — | — | — | — | — |
| 13 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 14 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 15 | Ignition 3 (IGT3) | — | W38 | — | 0.5 | PROTEUS-Black35-22 | — | — | — |
| 16 | Ignition 2 (IGT2) | — | W37 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| 17 | A/T shift solenoid 2 (S2) | — | W54 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
| 19 | Voltage feedback (VF) | — | — | — | — | — | — | — | — |
| 20 | ISC stepper coil 4 (ISCV4) | — | W57 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 21 | ISC stepper coil 3 (ISCV3) | — | W56 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 22 | ISC stepper coil 2 (ISCV2) | — | W55 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 23 | ISC stepper coil 1 (ISCV1) | — | W53 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 24 | Ignition 1 (IGT1) | — | W36 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 26 | Ignition 4 (IGT4) | — | W39 | — | 0.5 | PROTEUS-Black35-33 | — | — | — |
| 27 | A/T lock-up solenoid (S3) | — | W61 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 28 | Power ground (E11) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Ignition 6 (IGT6) | — | W41 | — | 0.5 | PROTEUS-Black35-31 | — | — | — |
| 3 | O2 heater (HT) | — | W51 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 30 | Ignition 5 (IGT5) | — | W40 | — | 0.5 | PROTEUS-Black35-32 | — | — | — |
| 31 | TRAC throttle idle switch (IDL2) | — | — | — | — | — | — | — | — |
| 32 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 33 | Power ground (E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power ground (E01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Knock sensor 2 (KNK2, rear) | — | W35 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 5 | Knock sensor 1 (KNK1, front) | — | W34 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 7 | EVAP purge VSV | — | — | — | — | — | — | — | — |
| 8 | Injector 3 (#30, cyl 2&6) | — | W44 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 9 | Injector 2 (#20, cyl 3&5) | — | W43 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W33 | — | 0.5 | OEM-C84-16 | — | — | — |
| 10 | Digital 1 | — | W67 | — | 0.5 | OEM-C84-4 | — | — | — |
| 11 | Digital 6 | — | W70 | — | 0.5 | OEM-C84-3 | — | — | — |
| 12 | VR 2 negative | — | W32 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | W45 | — | 0.5 | OEM-C86-9 | — | — | — |
| 19 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W66 | — | 0.5 | OEM-C86-12 | — | — | — |
| 20 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W68 | — | 0.5 | OEM-C84-9 | — | — | — |
| 4 | VR 2 positive | — | W31 | — | 0.5 | OEM-C84-10 | — | — | — |
| 5 | VR 1 positive | — | W29 | — | 0.5 | OEM-C84-5 | — | — | — |
| 6 | ETB 1 negative | — | — | — | — | — | — | — | — |
| 7 | ETB 1 positive | — | — | — | — | — | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W69 | — | 0.5 | OEM-C84-15 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W52 | — | 0.5 | OEM-C88-11 | — | — | — |
| 11 | Lowside 14 | — | W53 | — | 0.5 | OEM-C88-23 | — | — | — |
| 12 | Lowside 15 | — | W54 | — | 0.5 | OEM-C88-17 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W43 | — | 0.5 | OEM-C88-9 | — | — | — |
| 16 | Injector 4 | — | W56 | — | 0.5 | OEM-C88-21 | — | — | — |
| 17 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W60 | — | 0.5 | OEM-C86-8 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W49 | — | 0.5 | OEM-C85-2 | — | — | — |
| 21 | Lowside 12 | — | W51 | — | 0.5 | OEM-C88-3 | — | — | — |
| 22 | Ignition 3 | — | W38 | — | 0.5 | OEM-C88-15 | — | — | — |
| 23 | Lowside 16 | — | W55 | — | 0.5 | OEM-C88-22 | — | — | — |
| 24 | Power ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W42 | — | 0.5 | OEM-C88-10 | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | W41 | — | 0.5 | OEM-C88-29 | — | — | — |
| 32 | Ignition 5 | — | W40 | — | 0.5 | OEM-C88-30 | — | — | — |
| 33 | Ignition 4 | — | W39 | — | 0.5 | OEM-C88-26 | — | — | — |
| 34 | Ignition 2 | — | W37 | — | 0.5 | OEM-C88-16 | — | — | — |
| 35 | Ignition 1 | — | W36 | — | 0.5 | OEM-C88-24 | — | — | — |
| 4 | Injector 3 | — | W44 | — | 0.5 | OEM-C88-8 | — | — | — |
| 5 | Injector 5 | — | W57 | — | 0.5 | OEM-C88-20 | — | — | — |
| 6 | Injector 6 | — | W58 | — | 0.5 | OEM-C85-3 | — | — | — |
| 7 | Injector 7 | — | W59 | — | 0.5 | OEM-C85-4 | — | — | — |
| 8 | Injector 9 | — | W61 | — | 0.5 | OEM-C88-27 | — | — | — |
| 9 | Lowside 11 | — | W50 | — | 0.5 | OEM-C86-5 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W28 | — | 0.5 | OEM-C84-1 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W46 | — | 0.5 | OEM-C84-8 | — | — | — |
| 14 | Analog Volt 3 | — | W62 | — | 0.5 | OEM-C84-12 | — | — | — |
| 15 | Analog Volt 5 | — | W71 | — | 0.5 | OEM-C85-5 | — | — | — |
| 16 | Analog Volt 7 | — | W73 | — | 0.5 | OEM-C86-10 | — | — | — |
| 17 | Analog Volt 9 | — | W75 | — | 0.5 | OEM-C86-6 | — | — | — |
| 18 | Analog Volt 11 | — | W77 | — | 0.5 | OEM-C85-6 | — | — | — |
| 19 | Thermistor 1 | — | W65 | — | 0.5 | OEM-C86-13 | — | — | — |
| 2 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W48 | — | 0.5 | OEM-C84-20 | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W47 | — | 0.5 | OEM-C84-7 | — | — | — |
| 25 | Analog Volt 4 | — | W63 | — | 0.5 | OEM-C84-13 | — | — | — |
| 26 | Analog Volt 6 | — | W72 | — | 0.5 | OEM-C86-7 | — | — | — |
| 27 | Analog Volt 8 | — | W74 | — | 0.5 | OEM-C86-11 | — | — | — |
| 28 | Analog Volt 10 | — | W76 | — | 0.5 | OEM-C85-14 | — | — | — |
| 29 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W64 | — | 0.5 | OEM-C84-14 | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W34 | — | 0.5 | OEM-C88-5 | — | — | — |
| 35 | Knock 2 | — | W35 | — | 0.5 | OEM-C88-4 | — | — | — |
| 4 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-C84-11 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-C84-17 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-C84-22 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-C84-6 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C86-22 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C86-23 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-C85-16 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-C88-28 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-C88-33 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-C88-34 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C84-1 | Sensor supply +5V (VCC) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-C84-10 | Cam position 1 (G1) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | single_source | |
| OEM-C84-11 | Cam 1 return (G1-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-C84-12 | TRAC throttle position (VTA2) | analog_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-C84-13 | O2 sensor (OX1) | lambda_nb_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | single_source | |
| OEM-C84-14 | Intake air temperature (THA) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | single_source | |
| OEM-C84-15 | OD direct-clutch speed sensor (NCO+) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-C84-16 | Cam position 2 (G2) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | single_source | |
| OEM-C84-17 | Cam 2 return (G2-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-C84-20 | Coolant temperature (THW) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | single_source | |
| OEM-C84-22 | Sensor ground (E2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-C84-3 | OD direct-clutch speed sensor (NCO-) | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-C84-4 | No.2 speed sensor (SP2-) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-C84-5 | Crank position (NE) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | single_source | |
| OEM-C84-6 | Crank sensor return (NE-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-C84-7 | Throttle position (VTA1) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | single_source | |
| OEM-C84-8 | Manifold pressure (PIM) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-C84-9 | No.2 speed sensor (SP2+) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-C85-1 | Slave engine speed (NEO) | digital_in | — | — | — | single_source | |
| OEM-C85-10 | Fuel pump diagnostic (DI) | digital_in | — | — | — | single_source | |
| OEM-C85-11 | Slave TRAC throttle position (VTO2) | analog_out | — | — | — | single_source | |
| OEM-C85-14 | ABS active (MT only) | digital_in | PROTEUS-White35-28 | Analog Volt 10 | analog_in | single_source | |
| OEM-C85-16 | Power ground (E1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-C85-2 | EFI main relay control (M-REL) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | single_source | |
| OEM-C85-3 | Check-engine lamp (W) | low_side_out | PROTEUS-Black35-6 | Injector 6 | injector_out | single_source | |
| OEM-C85-4 | Fuel pump control (FPC) | low_side_out | PROTEUS-Black35-7 | Injector 7 | injector_out | single_source | |
| OEM-C85-5 | Diagnostic test 1 (TE1) | digital_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | single_source | |
| OEM-C85-6 | Timing retard (TR) | digital_in | PROTEUS-White35-18 | Analog Volt 11 | analog_in | single_source | |
| OEM-C85-7 | Slave throttle position (VTO1) | analog_out | — | — | — | single_source | |
| OEM-C86-1 | Diagnostic test terminal (TT) | digital_in | — | — | — | single_source | |
| OEM-C86-10 | A/T 2nd-gear indicator (2) | digital_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | single_source | |
| OEM-C86-11 | Diagnostic test 2 (TE2) | digital_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | single_source | |
| OEM-C86-12 | No.1 speed sensor (SP1) | digital_in | PROTEUS-Black23-2 | Digital 3 | digital_in | single_source | |
| OEM-C86-13 | Cat temperature sensor (CCO) | temp_in | PROTEUS-White35-19 | Thermistor 1 | temp_in | single_source | |
| OEM-C86-14 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-C86-17 | A/T throttle position (L3) | digital_in | — | — | — | single_source | |
| OEM-C86-18 | A/T throttle position (L2) | digital_in | — | — | — | single_source | |
| OEM-C86-19 | A/T throttle position (L1) | digital_in | — | — | — | single_source | |
| OEM-C86-2 | A/T low-gear indicator (L) | digital_in | — | — | — | single_source | |
| OEM-C86-20 | A/C request (A/C) | digital_in | — | — | — | single_source | |
| OEM-C86-22 | EFI main relay power (+B) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-C86-23 | EFI main relay power (+B1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-C86-25 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-C86-28 | Electrical load sense (ELS) | digital_in | — | — | — | single_source | |
| OEM-C86-3 | A/T power/normal mode (P) | digital_in | — | — | — | single_source | |
| OEM-C86-5 | A/C clutch relay (ACMG) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | single_source | |
| OEM-C86-6 | A/T overdrive disable 2 (OD2) | digital_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | single_source | |
| OEM-C86-7 | A/T overdrive disable 1 (OD1) | digital_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | single_source | |
| OEM-C86-8 | Cat temp warning light (EGW) | low_side_out | PROTEUS-Black35-19 | Injector 8 | injector_out | single_source | |
| OEM-C86-9 | Ignition switch (IGSW) | digital_in | PROTEUS-Black23-18 | Ignition switch in | digital_in | single_source | |
| OEM-C88-10 | Injector 1 (#10, cyl 1&4) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | single_source | |
| OEM-C88-11 | A/T shift solenoid 1 (S1) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | single_source | |
| OEM-C88-12 | Igniter feedback (IGF) | digital_in | — | — | — | single_source | |
| OEM-C88-13 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-C88-14 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-C88-15 | Ignition 3 (IGT3) | ignition_out | PROTEUS-Black35-22 | Ignition 3 | ignition_out | single_source | |
| OEM-C88-16 | Ignition 2 (IGT2) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | single_source | |
| OEM-C88-17 | A/T shift solenoid 2 (S2) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | single_source | |
| OEM-C88-19 | Voltage feedback (VF) | analog_out | — | — | — | single_source | |
| OEM-C88-20 | ISC stepper coil 4 (ISCV4) | low_side_out | PROTEUS-Black35-5 | Injector 5 | injector_out | single_source | |
| OEM-C88-21 | ISC stepper coil 3 (ISCV3) | low_side_out | PROTEUS-Black35-16 | Injector 4 | injector_out | single_source | |
| OEM-C88-22 | ISC stepper coil 2 (ISCV2) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | single_source | |
| OEM-C88-23 | ISC stepper coil 1 (ISCV1) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | single_source | |
| OEM-C88-24 | Ignition 1 (IGT1) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | single_source | |
| OEM-C88-26 | Ignition 4 (IGT4) | ignition_out | PROTEUS-Black35-33 | Ignition 4 | ignition_out | single_source | |
| OEM-C88-27 | A/T lock-up solenoid (S3) | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | single_source | |
| OEM-C88-28 | Power ground (E11) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-C88-29 | Ignition 6 (IGT6) | ignition_out | PROTEUS-Black35-31 | Ignition 6 | ignition_out | single_source | |
| OEM-C88-3 | O2 heater (HT) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | single_source | |
| OEM-C88-30 | Ignition 5 (IGT5) | ignition_out | PROTEUS-Black35-32 | Ignition 5 | ignition_out | single_source | |
| OEM-C88-31 | TRAC throttle idle switch (IDL2) | digital_in | — | — | — | single_source | |
| OEM-C88-32 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-C88-33 | Power ground (E02) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-C88-34 | Power ground (E01) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-C88-4 | Knock sensor 2 (KNK2, rear) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | single_source | |
| OEM-C88-5 | Knock sensor 1 (KNK1, front) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | single_source | |
| OEM-C88-7 | EVAP purge VSV | low_side_out | — | — | — | single_source | |
| OEM-C88-8 | Injector 3 (#30, cyl 2&6) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | single_source | |
| OEM-C88-9 | Injector 2 (#20, cyl 3&5) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C86-22 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-C86-23 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B1) | — | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W4 | OEM-C85-16 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W5 | OEM-C88-28 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W6 | OEM-C88-33 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W7 | OEM-C88-34 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W14 | OEM-C84-11 | SP-0V-1 | 0.5 | no route | Cam 1 return (G1-) | — | |
| W15 | OEM-C84-17 | SP-0V-1 | 0.5 | no route | Cam 2 return (G2-) | — | |
| W16 | OEM-C84-22 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W17 | OEM-C84-6 | SP-0V-1 | 0.5 | no route | Crank sensor return (NE-) | — | |
| W18 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W25 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W26 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W27 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W28 | OEM-C84-1 | PROTEUS-White35-10 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W29 | OEM-C84-5 | PROTEUS-Black23-5 | 0.5 | no route | Crank position (NE) | — | |
| W30 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W31 | OEM-C84-10 | PROTEUS-Black23-4 | 0.5 | no route | Cam position 1 (G1) | — | |
| W32 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W33 | OEM-C84-16 | PROTEUS-Black23-1 | 0.5 | no route | Cam position 2 (G2) | — | |
| W34 | OEM-C88-5 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W35 | OEM-C88-4 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W36 | OEM-C88-24 | PROTEUS-Black35-35 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W37 | OEM-C88-16 | PROTEUS-Black35-34 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W38 | OEM-C88-15 | PROTEUS-Black35-22 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W39 | OEM-C88-26 | PROTEUS-Black35-33 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W40 | OEM-C88-30 | PROTEUS-Black35-32 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W41 | OEM-C88-29 | PROTEUS-Black35-31 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W42 | OEM-C88-10 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 (#10, cyl 1&4) | — | |
| W43 | OEM-C88-9 | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 (#20, cyl 3&5) | — | |
| W44 | OEM-C88-8 | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 (#30, cyl 2&6) | — | |
| W45 | OEM-C86-9 | PROTEUS-Black23-18 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W46 | OEM-C84-8 | PROTEUS-White35-13 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W47 | OEM-C84-7 | PROTEUS-White35-24 | 0.5 | no route | Throttle position (VTA1) | — | |
| W48 | OEM-C84-20 | PROTEUS-White35-20 | 0.5 | no route | Coolant temperature (THW) | — | |
| W49 | OEM-C85-2 | PROTEUS-Black35-20 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W50 | OEM-C86-5 | PROTEUS-Black35-9 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W51 | OEM-C88-3 | PROTEUS-Black35-21 | 0.5 | no route | O2 heater (HT) | — | |
| W52 | OEM-C88-11 | PROTEUS-Black35-10 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W53 | OEM-C88-23 | PROTEUS-Black35-11 | 0.5 | no route | ISC stepper coil 1 (ISCV1) | — | |
| W54 | OEM-C88-17 | PROTEUS-Black35-12 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W55 | OEM-C88-22 | PROTEUS-Black35-23 | 0.5 | no route | ISC stepper coil 2 (ISCV2) | — | |
| W56 | OEM-C88-21 | PROTEUS-Black35-16 | 0.5 | no route | ISC stepper coil 3 (ISCV3) | — | |
| W57 | OEM-C88-20 | PROTEUS-Black35-5 | 0.5 | no route | ISC stepper coil 4 (ISCV4) | — | |
| W58 | OEM-C85-3 | PROTEUS-Black35-6 | 0.5 | no route | Check-engine lamp (W) | — | |
| W59 | OEM-C85-4 | PROTEUS-Black35-7 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W60 | OEM-C86-8 | PROTEUS-Black35-19 | 0.5 | no route | Cat temp warning light (EGW) | — | |
| W61 | OEM-C88-27 | PROTEUS-Black35-8 | 0.5 | no route | A/T lock-up solenoid (S3) | — | |
| W62 | OEM-C84-12 | PROTEUS-White35-14 | 0.5 | no route | TRAC throttle position (VTA2) | — | |
| W63 | OEM-C84-13 | PROTEUS-White35-25 | 0.5 | no route | O2 sensor (OX1) | — | |
| W64 | OEM-C84-14 | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (THA) | — | |
| W65 | OEM-C86-13 | PROTEUS-White35-19 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W66 | OEM-C86-12 | PROTEUS-Black23-2 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W67 | OEM-C84-4 | PROTEUS-Black23-10 | 0.5 | no route | No.2 speed sensor (SP2-) | — | |
| W68 | OEM-C84-9 | PROTEUS-Black23-3 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W69 | OEM-C84-15 | PROTEUS-Black23-9 | 0.5 | no route | OD direct-clutch speed sensor (NCO+) | — | |
| W70 | OEM-C84-3 | PROTEUS-Black23-11 | 0.5 | no route | OD direct-clutch speed sensor (NCO-) | — | |
| W71 | OEM-C85-5 | PROTEUS-White35-15 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W72 | OEM-C86-7 | PROTEUS-White35-26 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W73 | OEM-C86-10 | PROTEUS-White35-16 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W74 | OEM-C86-11 | PROTEUS-White35-27 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W75 | OEM-C86-6 | PROTEUS-White35-17 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W76 | OEM-C85-14 | PROTEUS-White35-28 | 0.5 | no route | ABS active (MT only) | — | |
| W77 | OEM-C85-6 | PROTEUS-White35-18 | 0.5 | no route | Timing retard (TR) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (16)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | Proteus | The 1JZ-GTE injectors (1JZ-GTE fuel injector) are low-impedance, but Proteus drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| warn | NET_FAMILY | OEM-C85-14 ↔ PROTEUS-White35-28 | OEM-C85-14 "ABS active (MT only)" [digital_in] is wired to PROTEUS-White35-28 "Analog Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-5 ↔ PROTEUS-White35-15 | OEM-C85-5 "Diagnostic test 1 (TE1)" [digital_in] is wired to PROTEUS-White35-15 "Analog Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C85-6 ↔ PROTEUS-White35-18 | OEM-C85-6 "Timing retard (TR)" [digital_in] is wired to PROTEUS-White35-18 "Analog Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-10 ↔ PROTEUS-White35-16 | OEM-C86-10 "A/T 2nd-gear indicator (2)" [digital_in] is wired to PROTEUS-White35-16 "Analog Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-11 ↔ PROTEUS-White35-27 | OEM-C86-11 "Diagnostic test 2 (TE2)" [digital_in] is wired to PROTEUS-White35-27 "Analog Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-6 ↔ PROTEUS-White35-17 | OEM-C86-6 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to PROTEUS-White35-17 "Analog Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C86-7 ↔ PROTEUS-White35-26 | OEM-C86-7 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to PROTEUS-White35-26 "Analog Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-C85-3 ↔ PROTEUS-Black35-6 | OEM-C85-3 "Check-engine lamp (W)" [low_side_out] is wired to PROTEUS-Black35-6 "Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C85-4 ↔ PROTEUS-Black35-7 | OEM-C85-4 "Fuel pump control (FPC)" [low_side_out] is wired to PROTEUS-Black35-7 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C86-8 ↔ PROTEUS-Black35-19 | OEM-C86-8 "Cat temp warning light (EGW)" [low_side_out] is wired to PROTEUS-Black35-19 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-20 ↔ PROTEUS-Black35-5 | OEM-C88-20 "ISC stepper coil 4 (ISCV4)" [low_side_out] is wired to PROTEUS-Black35-5 "Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-21 ↔ PROTEUS-Black35-16 | OEM-C88-21 "ISC stepper coil 3 (ISCV3)" [low_side_out] is wired to PROTEUS-Black35-16 "Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C88-27 ↔ PROTEUS-Black35-8 | OEM-C88-27 "A/T lock-up solenoid (S3)" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | PROTEUS-White35-8 ↔ PROTEUS-Black23-13 | PROTEUS-White35-8 "Sensor ground" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 20 optional OEM pins are not mapped: OEM-C85-1 Slave engine speed (NEO); OEM-C85-10 Fuel pump diagnostic (DI); OEM-C85-11 Slave TRAC throttle position (VTO2); OEM-C85-7 Slave throttle position (VTO1); OEM-C86-1 Diagnostic test terminal (TT); OEM-C86-17 A/T throttle position (L3); OEM-C86-18 A/T throttle position (L2); OEM-C86-19 A/T throttle position (L1); OEM-C86-2 A/T low-gear indicator (L); OEM-C86-20 A/C request (A/C); OEM-C86-25 Stop light switch (STP); OEM-C86-28 Electrical load sense (ELS); OEM-C86-3 A/T power/normal mode (P); OEM-C88-12 Igniter feedback (IGF); OEM-C88-13 Starter signal (STA); OEM-C88-14 Neutral/park switch (NSW); OEM-C88-19 Voltage feedback (VF); OEM-C88-31 TRAC throttle idle switch (IDL2); OEM-C88-32 TPS idle switch (IDL1); OEM-C88-7 EVAP purge VSV |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-C86-14 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-C86 14: Battery constant (BATT): rusEFI Proteus has no battery-constant input; not needed - OEM-C88 7: EVAP purge VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-C85 1: Slave engine speed (NEO): no free frequency_in/switch_in on rusEFI Proteus - OEM-C85 10: Fuel pump diagnostic (DI): no free frequency_in/switch_in on rusEFI Proteus - OEM-C88 12: Igniter feedback (IGF): no free frequency_in/switch_in on rusEFI Proteus - OEM-C86 1: Diagnostic test terminal (TT): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 17: A/T throttle position (L3): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 18: A/T throttle position (L2): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 19: A/T throttle position (L1): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 2: A/T low-gear indicator (L): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 20: A/C request (A/C): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 25: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 28: Electrical load sense (ELS): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C86 3: A/T power/normal mode (P): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C88 13: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C88 14: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C88 31: TRAC throttle idle switch (IDL2): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C88 32: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-C85 11: Slave TRAC throttle position (VTO2): no free analog_out on rusEFI Proteus - OEM-C85 7: Slave throttle position (VTO1): no free analog_out on rusEFI Proteus - OEM-C88 19: Voltage feedback (VF): no free analog_out on rusEFI Proteus
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |
| 2 | community_copy | wilbo666: 1JZ-GTE pinout (JZZ30 Soarer page, shared 1JZ-GTE engine/ECU) | http://wilbo666.pbworks.com/w/page/47216384/1JZ-GTE%20JZZ30%20Soarer | — | — | — |