Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) → Link G4X MonsoonX (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) — Link — G4X MonsoonX
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 3: read the Findings page before cutting any wire |
| Size of the job | 38 wires · 6 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E10-32 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | G4XMONSOONX-A-A5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | G4XMONSOONX-A-A25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | G4XMONSOONX-A-A34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E9-65 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E9-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-0V-1 | G4XMONSOONX-A-A24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-E9-41 | G4XMONSOONX-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E9-27 | G4XMONSOONX-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E9-26 | G4XMONSOONX-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E9-25 | G4XMONSOONX-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E9-50 | G4XMONSOONX-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E9-57 | G4XMONSOONX-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E9-20 | G4XMONSOONX-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E9-19 | G4XMONSOONX-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E9-18 | G4XMONSOONX-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-E9-17 | G4XMONSOONX-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-E9-16 | G4XMONSOONX-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E9-15 | G4XMONSOONX-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E9-62 | G4XMONSOONX-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E9-43 | G4XMONSOONX-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E9-44 | G4XMONSOONX-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E10-23 | G4XMONSOONX-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E10-24 | G4XMONSOONX-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E9-10 | G4XMONSOONX-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E9-35 | G4XMONSOONX-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E9-34 | G4XMONSOONX-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-9 | G4XMONSOONX-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-47 | G4XMONSOONX-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-48 | G4XMONSOONX-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E10-29 | G4XMONSOONX-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E10-2 | G4XMONSOONX-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E9-23 | G4XMONSOONX-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G4XMONSOONX-A-A32 | G4XMONSOONX-A-A24 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | G4XMONSOONX-A-A5 | G4XMONSOONX-A-A24 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | G4XMONSOONX-A-A5 | G4XMONSOONX-A-A25 | open (OL) | +12 V supply must not touch power ground | |
| 4 | G4XMONSOONX-A-A25 | G4XMONSOONX-A-A32 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | G4XMONSOONX-A-A5 | G4XMONSOONX-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G4XMONSOONX-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injector 4 | — | W22 | — | 0.5 | OEM-E9-17 | — | — | — |
| A10 | Ignition 4 | — | — | — | — | — | — | — | — |
| A11 | Ignition 3 | — | — | — | — | — | — | — | — |
| A12 | Ignition 2 | — | — | — | — | — | — | — | — |
| A13 | Ignition 1 | — | W18 | — | 0.5 | OEM-E9-57 | — | — | — |
| A14 | Analog Volt 4 | — | W35 | — | 0.5 | OEM-E9-48 | — | — | — |
| A15 | Analog Temp 1 | — | W27 | — | 0.5 | OEM-E9-44 | — | — | — |
| A16 | Analog Temp 2 | — | W36 | — | 0.5 | OEM-E10-29 | — | — | — |
| A17 | Analog Volt 1 | — | W25 | — | 0.5 | OEM-E9-62 | — | — | — |
| A18 | Aux 4 | — | W31 | — | 0.5 | OEM-E9-35 | — | — | — |
| A19 | Aux 3 | — | W30 | — | 0.5 | OEM-E9-10 | — | — | — |
| A2 | Injector 3 | — | W21 | — | 0.5 | OEM-E9-18 | — | — | — |
| A20 | Aux 2 | — | W29 | — | 0.5 | OEM-E10-24 | — | — | — |
| A21 | Aux 1 | — | W28 | — | 0.5 | OEM-E10-23 | — | — | — |
| A22 | Analog Volt 2 | — | W26 | — | 0.5 | OEM-E9-43 | — | — | — |
| A23 | Digital Input 3 | — | W38 | — | 0.5 | OEM-E9-23 | — | — | — |
| A24 | Sensor Ground | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| A25 | System Ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| A26 | Aux 6 | — | W33 | — | 0.5 | OEM-E9-9 | — | — | — |
| A27 | Aux 5 | — | W32 | — | 0.5 | OEM-E9-34 | — | — | — |
| A28 | CAN H | — | — | — | — | — | — | — | — |
| A29 | CAN L | — | — | — | — | — | — | — | — |
| A3 | Injector 2 | — | W20 | — | 0.5 | OEM-E9-19 | — | — | — |
| A3 | Injector 2 | — | W24 | — | 0.5 | OEM-E9-15 | — | — | — |
| A30 | Digital Input 1 | — | W16 | — | 0.5 | OEM-E9-25 | — | — | — |
| A31 | Digital Input 2 | — | W37 | — | 0.5 | OEM-E10-2 | — | — | — |
| A32 | +5V Out | — | W13 | — | 0.5 | OEM-E9-41 | — | — | — |
| A33 | Analog Volt 3 | — | W34 | — | 0.5 | OEM-E9-47 | — | — | — |
| A34 | System Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| A4 | Injector 1 | — | W19 | — | 0.5 | OEM-E9-20 | — | — | — |
| A4 | Injector 1 | — | W23 | — | 0.5 | OEM-E9-16 | — | — | — |
| A5 | +14V ECU Power | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| A6 | Knock 1 / Digital Input 4 | — | W17 | — | 0.5 | OEM-E9-50 | — | — | — |
| A7 | Shield Ground | — | — | — | — | — | — | — | — |
| A8 | Trigger 1 | — | W14 | — | 0.5 | OEM-E9-27 | — | — | — |
| A9 | Trigger 2 | — | W15 | — | 0.5 | OEM-E9-26 | — | — | — |
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | — | — | — | — | — | — | — |
| 10 | A/T low-gear indicator (L) | — | — | — | — | — | — | — | — |
| 12 | A/T overdrive disable 1 (OD1) | — | — | — | — | — | — | — | — |
| 15 | Electrical load sense (ELS) | — | — | — | — | — | — | — | — |
| 17 | Diagnostic test terminal (TT) | — | — | — | — | — | — | — | — |
| 18 | A/T manual mode select (M) | — | — | — | — | — | — | — | — |
| 19 | Diagnostic test 2 (TE2) | — | — | — | — | — | — | — | — |
| 2 | No.1 speed sensor (SP1) | — | W37 | — | 0.5 | G4XMONSOONX-A-A31 | — | — | — |
| 20 | Diagnostic test 1 (TE1) | — | — | — | — | — | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | — | — | — | — | — | — | — |
| 22 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W28 | — | 0.5 | G4XMONSOONX-A-A21 | — | — | — |
| 24 | EFI main relay control (M-REL) | — | W29 | — | 0.5 | G4XMONSOONX-A-A20 | — | — | — |
| 25 | A/T manual indicator (MI) | — | — | — | — | — | — | — | — |
| 28 | A/T overdrive disable 2 (OD2) | — | — | — | — | — | — | — | — |
| 29 | Cat temperature sensor (CCO) | — | W36 | — | 0.5 | G4XMONSOONX-A-A16 | — | — | — |
| 3 | A/T kickdown switch (KD) | — | — | — | — | — | — | — | — |
| 31 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 32 | EFI main relay power (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 34 | A/C request (A/C) | — | — | — | — | — | — | — | — |
| 35 | Power steering switch (PS) | — | — | — | — | — | — | — | — |
| 4 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 5 | Cat-temp warning light (EGW) | — | — | — | — | — | — | — | — |
| 6 | Check-engine light (W) | — | — | — | — | — | — | — | — |
| 9 | A/T 2nd-gear indicator (2) | — | — | — | — | — | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | A/T shift solenoid 1 (S1) | — | W30 | — | 0.5 | G4XMONSOONX-A-A19 | — | — | — |
| 15 | Injector 6 (#60, rear) | — | W24 | — | 0.5 | G4XMONSOONX-A-A3 | — | — | — |
| 16 | Injector 5 (#50) | — | W23 | — | 0.5 | G4XMONSOONX-A-A4 | — | — | — |
| 17 | Injector 4 (#40) | — | W22 | — | 0.5 | G4XMONSOONX-A-A1 | — | — | — |
| 18 | Injector 3 (#30) | — | W21 | — | 0.5 | G4XMONSOONX-A-A2 | — | — | — |
| 19 | Injector 2 (#20) | — | W20 | — | 0.5 | G4XMONSOONX-A-A3 | — | — | — |
| 20 | Injector 1 (#10, front) | — | W19 | — | 0.5 | G4XMONSOONX-A-A4 | — | — | — |
| 23 | No.2 speed sensor (SP2+) | — | W38 | — | 0.5 | G4XMONSOONX-A-A23 | — | — | — |
| 24 | A/T oil temperature (OIL) | — | — | — | — | — | — | — | — |
| 25 | Cam position 2 (G2) | — | W16 | — | 0.5 | G4XMONSOONX-A-A30 | — | — | — |
| 26 | Cam position 1 (G1) | — | W15 | — | 0.5 | G4XMONSOONX-A-A9 | — | — | — |
| 27 | Crank position (NE) | — | W14 | — | 0.5 | G4XMONSOONX-A-A8 | — | — | — |
| 28 | Voltage feedback 2 (VF2) | — | — | — | — | — | — | — | — |
| 29 | Voltage feedback 1 (VF1) | — | — | — | — | — | — | — | — |
| 3 | No.2 speed sensor return (SP2-) | — | — | — | — | — | — | — | — |
| 32 | ISC stepper coil 4 (ISC4) | — | — | — | — | — | — | — | — |
| 33 | ISC stepper coil 3 (ISC3) | — | — | — | — | — | — | — | — |
| 34 | ISC stepper coil 2 (ISC2) | — | W32 | — | 0.5 | G4XMONSOONX-A-A27 | — | — | — |
| 35 | ISC stepper coil 1 (ISC1) | — | W31 | — | 0.5 | G4XMONSOONX-A-A18 | — | — | — |
| 39 | ACIS intake VSV | — | — | — | — | — | — | — | — |
| 4 | Power ground (E11) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W13 | — | 0.5 | G4XMONSOONX-A-A32 | — | — | — |
| 43 | Throttle position (VTA1) | — | W26 | — | 0.5 | G4XMONSOONX-A-A22 | — | — | — |
| 44 | Coolant temperature (THW) | — | W27 | — | 0.5 | G4XMONSOONX-A-A15 | — | — | — |
| 45 | Intake air temperature (THA) | — | — | — | — | — | — | — | — |
| 47 | O2 sensor 2 (OX2, rear bank) | — | W34 | — | 0.5 | G4XMONSOONX-A-A33 | — | — | — |
| 48 | O2 sensor 1 (OX1, front bank) | — | W35 | — | 0.5 | G4XMONSOONX-A-A14 | — | — | — |
| 49 | Knock sensor 2 (KNK2, rear) | — | — | — | — | — | — | — | — |
| 50 | Knock sensor 1 (KNK1, front) | — | W17 | — | 0.5 | G4XMONSOONX-A-A6 | — | — | — |
| 57 | Igniter trigger (IGT) | — | W18 | — | 0.5 | G4XMONSOONX-A-A13 | — | — | — |
| 58 | Igniter verification (IGF) | — | — | — | — | — | — | — | — |
| 62 | Manifold pressure (PIM) | — | W25 | — | 0.5 | G4XMONSOONX-A-A17 | — | — | — |
| 64 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 65 | Sensor ground (E2) | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 69 | Power ground (E1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Distributor ground (G-) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 74 | EVAP purge VSV | — | — | — | — | — | — | — | — |
| 76 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 77 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 79 | Power ground (E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | A/T lock-up solenoid (S3) | — | — | — | — | — | — | — | — |
| 80 | Power ground (E01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | A/T shift solenoid 2 (S2) | — | W33 | — | 0.5 | G4XMONSOONX-A-A26 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-E9-65 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-E9-7 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | G4XMONSOONX-A-A24 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E10-31 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E10-32 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | G4XMONSOONX-A-A5 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-E9-80 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | G4XMONSOONX-A-A25 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | G4XMONSOONX-A-A34 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | — | — | — | single_source | |
| OEM-E10-10 | A/T low-gear indicator (L) | digital_in | — | — | — | single_source | |
| OEM-E10-12 | A/T overdrive disable 1 (OD1) | digital_in | — | — | — | single_source | |
| OEM-E10-15 | Electrical load sense (ELS) | digital_in | — | — | — | single_source | |
| OEM-E10-17 | Diagnostic test terminal (TT) | digital_in | — | — | — | single_source | |
| OEM-E10-18 | A/T manual mode select (M) | digital_in | — | — | — | single_source | |
| OEM-E10-19 | Diagnostic test 2 (TE2) | digital_in | — | — | — | single_source | |
| OEM-E10-2 | No.1 speed sensor (SP1) | digital_in | G4XMONSOONX-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-E10-20 | Diagnostic test 1 (TE1) | digital_in | — | — | — | single_source | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | — | — | — | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | G4XMONSOONX-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-E10-24 | EFI main relay control (M-REL) | low_side_out | G4XMONSOONX-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-E10-25 | A/T manual indicator (MI) | digital_in | — | — | — | single_source | |
| OEM-E10-28 | A/T overdrive disable 2 (OD2) | digital_in | — | — | — | single_source | |
| OEM-E10-29 | Cat temperature sensor (CCO) | temp_in | G4XMONSOONX-A-A16 | Analog Temp 2 | temp_in | single_source | |
| OEM-E10-3 | A/T kickdown switch (KD) | digital_in | — | — | — | single_source | |
| OEM-E10-31 | EFI main relay power (+B) | power_in | G4XMONSOONX-A-A5 | +14V ECU Power | power_in | single_source | |
| OEM-E10-32 | EFI main relay power (+B1) | power_in | G4XMONSOONX-A-A5 | +14V ECU Power | power_in | single_source | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-34 | A/C request (A/C) | digital_in | — | — | — | single_source | |
| OEM-E10-35 | Power steering switch (PS) | digital_in | — | — | — | single_source | |
| OEM-E10-4 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-E10-5 | Cat-temp warning light (EGW) | low_side_out | — | — | — | single_source | |
| OEM-E10-6 | Check-engine light (W) | low_side_out | — | — | — | single_source | |
| OEM-E10-9 | A/T 2nd-gear indicator (2) | digital_in | — | — | — | single_source | |
| OEM-E9-10 | A/T shift solenoid 1 (S1) | low_side_out | G4XMONSOONX-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-E9-15 | Injector 6 (#60, rear) | injector_out | G4XMONSOONX-A-A3 | Injector 2 | injector_out | single_source | |
| OEM-E9-16 | Injector 5 (#50) | injector_out | G4XMONSOONX-A-A4 | Injector 1 | injector_out | single_source | |
| OEM-E9-17 | Injector 4 (#40) | injector_out | G4XMONSOONX-A-A1 | Injector 4 | injector_out | single_source | |
| OEM-E9-18 | Injector 3 (#30) | injector_out | G4XMONSOONX-A-A2 | Injector 3 | injector_out | single_source | |
| OEM-E9-19 | Injector 2 (#20) | injector_out | G4XMONSOONX-A-A3 | Injector 2 | injector_out | single_source | |
| OEM-E9-20 | Injector 1 (#10, front) | injector_out | G4XMONSOONX-A-A4 | Injector 1 | injector_out | single_source | |
| OEM-E9-23 | No.2 speed sensor (SP2+) | digital_in | G4XMONSOONX-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-E9-24 | A/T oil temperature (OIL) | temp_in | — | — | — | single_source | |
| OEM-E9-25 | Cam position 2 (G2) | trigger_in | G4XMONSOONX-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-E9-26 | Cam position 1 (G1) | trigger_in | G4XMONSOONX-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-E9-27 | Crank position (NE) | trigger_in | G4XMONSOONX-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-E9-28 | Voltage feedback 2 (VF2) | analog_out | — | — | — | single_source | |
| OEM-E9-29 | Voltage feedback 1 (VF1) | analog_out | — | — | — | single_source | |
| OEM-E9-3 | No.2 speed sensor return (SP2-) | digital_in | — | — | — | single_source | |
| OEM-E9-32 | ISC stepper coil 4 (ISC4) | low_side_out | — | — | — | single_source | |
| OEM-E9-33 | ISC stepper coil 3 (ISC3) | low_side_out | — | — | — | single_source | |
| OEM-E9-34 | ISC stepper coil 2 (ISC2) | low_side_out | G4XMONSOONX-A-A27 | Aux 5 | low_side_out | single_source | |
| OEM-E9-35 | ISC stepper coil 1 (ISC1) | low_side_out | G4XMONSOONX-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-E9-39 | ACIS intake VSV | low_side_out | — | — | — | single_source | |
| OEM-E9-4 | Power ground (E11) | ground | G4XMONSOONX-A-A25 + G4XMONSOONX-A-A34 | System Ground + System Ground | ground | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | G4XMONSOONX-A-A32 | +5V Out | vref | single_source | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | G4XMONSOONX-A-A22 | Analog Volt 2 | analog_in | single_source | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | G4XMONSOONX-A-A15 | Analog Temp 1 | temp_in | single_source | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | — | — | — | single_source | |
| OEM-E9-47 | O2 sensor 2 (OX2, rear bank) | lambda_nb_in | G4XMONSOONX-A-A33 | Analog Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1, front bank) | lambda_nb_in | G4XMONSOONX-A-A14 | Analog Volt 4 | analog_in | single_source | |
| OEM-E9-49 | Knock sensor 2 (KNK2, rear) | knock_in | — | — | — | single_source | |
| OEM-E9-50 | Knock sensor 1 (KNK1, front) | knock_in | G4XMONSOONX-A-A6 | Knock 1 / Digital Input 4 | knock_in | single_source | |
| OEM-E9-57 | Igniter trigger (IGT) | ignition_out | G4XMONSOONX-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-E9-58 | Igniter verification (IGF) | digital_in | — | — | — | single_source | |
| OEM-E9-62 | Manifold pressure (PIM) | analog_in | G4XMONSOONX-A-A17 | Analog Volt 1 | analog_in | single_source | |
| OEM-E9-64 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | G4XMONSOONX-A-A24 | Sensor Ground | sensor_ground | single_source | |
| OEM-E9-69 | Power ground (E1) | ground | G4XMONSOONX-A-A25 + G4XMONSOONX-A-A34 | System Ground + System Ground | ground | single_source | |
| OEM-E9-7 | Distributor ground (G-) | sensor_ground | G4XMONSOONX-A-A24 | Sensor Ground | sensor_ground | single_source | |
| OEM-E9-74 | EVAP purge VSV | low_side_out | — | — | — | single_source | |
| OEM-E9-76 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-E9-77 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-E9-79 | Power ground (E02) | ground | G4XMONSOONX-A-A25 + G4XMONSOONX-A-A34 | System Ground + System Ground | ground | single_source | |
| OEM-E9-8 | A/T lock-up solenoid (S3) | low_side_out | — | — | — | single_source | |
| OEM-E9-80 | Power ground (E01) | ground | G4XMONSOONX-A-A25 + G4XMONSOONX-A-A34 | System Ground + System Ground | ground | single_source | |
| OEM-E9-9 | A/T shift solenoid 2 (S2) | low_side_out | G4XMONSOONX-A-A26 | Aux 6 | low_side_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-E10-32 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B1) | — | |
| W3 | SP-14V-1 | G4XMONSOONX-A-A5 | 0.85 | no route | +14V ECU Power | — | |
| W4 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W5 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W8 | SP-GND-1 | G4XMONSOONX-A-A25 | 0.85 | no route | System Ground | — | |
| W9 | SP-GND-1 | G4XMONSOONX-A-A34 | 0.85 | no route | System Ground | — | |
| W10 | OEM-E9-65 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W11 | OEM-E9-7 | SP-0V-1 | 0.5 | no route | Distributor ground (G-) | — | |
| W12 | SP-0V-1 | G4XMONSOONX-A-A24 | 0.5 | no route | Sensor Ground | — | |
| W13 | OEM-E9-41 | G4XMONSOONX-A-A32 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W14 | OEM-E9-27 | G4XMONSOONX-A-A8 | 0.5 | no route | Crank position (NE) | — | |
| W15 | OEM-E9-26 | G4XMONSOONX-A-A9 | 0.5 | no route | Cam position 1 (G1) | — | |
| W16 | OEM-E9-25 | G4XMONSOONX-A-A30 | 0.5 | no route | Cam position 2 (G2) | — | |
| W17 | OEM-E9-50 | G4XMONSOONX-A-A6 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W18 | OEM-E9-57 | G4XMONSOONX-A-A13 | 0.5 | no route | Igniter trigger (IGT) | — | |
| W19 | OEM-E9-20 | G4XMONSOONX-A-A4 | 0.5 | no route | Injector 1 (#10, front) | — | |
| W20 | OEM-E9-19 | G4XMONSOONX-A-A3 | 0.5 | no route | Injector 2 (#20) | — | |
| W21 | OEM-E9-18 | G4XMONSOONX-A-A2 | 0.5 | no route | Injector 3 (#30) | — | |
| W22 | OEM-E9-17 | G4XMONSOONX-A-A1 | 0.5 | no route | Injector 4 (#40) | — | |
| W23 | OEM-E9-16 | G4XMONSOONX-A-A4 | 0.5 | no route | Injector 5 (#50) | — | |
| W24 | OEM-E9-15 | G4XMONSOONX-A-A3 | 0.5 | no route | Injector 6 (#60, rear) | — | |
| W25 | OEM-E9-62 | G4XMONSOONX-A-A17 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W26 | OEM-E9-43 | G4XMONSOONX-A-A22 | 0.5 | no route | Throttle position (VTA1) | — | |
| W27 | OEM-E9-44 | G4XMONSOONX-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W28 | OEM-E10-23 | G4XMONSOONX-A-A21 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W29 | OEM-E10-24 | G4XMONSOONX-A-A20 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W30 | OEM-E9-10 | G4XMONSOONX-A-A19 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W31 | OEM-E9-35 | G4XMONSOONX-A-A18 | 0.5 | no route | ISC stepper coil 1 (ISC1) | — | |
| W32 | OEM-E9-34 | G4XMONSOONX-A-A27 | 0.5 | no route | ISC stepper coil 2 (ISC2) | — | |
| W33 | OEM-E9-9 | G4XMONSOONX-A-A26 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W34 | OEM-E9-47 | G4XMONSOONX-A-A33 | 0.5 | no route | O2 sensor 2 (OX2, rear bank) | — | |
| W35 | OEM-E9-48 | G4XMONSOONX-A-A14 | 0.5 | no route | O2 sensor 1 (OX1, front bank) | — | |
| W36 | OEM-E10-29 | G4XMONSOONX-A-A16 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W37 | OEM-E10-2 | G4XMONSOONX-A-A31 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W38 | OEM-E9-23 | G4XMONSOONX-A-A23 | 0.5 | no route | No.2 speed sensor (SP2+) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (8)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | NET_MERGED | G4XMONSOONX-A-A3 + OEM-E9-15 + OEM-E9-19 | 2 different OEM functions share one net: OEM-E9-15 Injector 6 (#60, rear); OEM-E9-19 Injector 2 (#20) |
| error | NET_MERGED | G4XMONSOONX-A-A4 + OEM-E9-16 + OEM-E9-20 | 2 different OEM functions share one net: OEM-E9-16 Injector 5 (#50); OEM-E9-20 Injector 1 (#10, front) |
| error | REQUIRED_UNMAPPED | OEM-E10-1 | Required OEM function "Ignition switch (IGSW)" (digital_in) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G4XMONSOONX-A-A20 | G4XMONSOONX-A-A20 "Aux 2" drives OEM-E10-24 EFI main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G4XMONSOONX-A-A21 | G4XMONSOONX-A-A21 "Aux 1" drives OEM-E10-23 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-E9-25 ↔ G4XMONSOONX-A-A30 | OEM-E9-25 "Cam position 2 (G2)" [trigger_in] is wired to G4XMONSOONX-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | UNMAPPED | OEM | 33 optional OEM pins are not mapped: OEM-E10-10 A/T low-gear indicator (L); OEM-E10-12 A/T overdrive disable 1 (OD1); OEM-E10-15 Electrical load sense (ELS); OEM-E10-17 Diagnostic test terminal (TT); OEM-E10-18 A/T manual mode select (M); OEM-E10-19 Diagnostic test 2 (TE2); OEM-E10-20 Diagnostic test 1 (TE1); OEM-E10-21 Fuel pump diagnostic (DI); OEM-E10-22 Fuel pump control (FPC); OEM-E10-25 A/T manual indicator (MI); OEM-E10-28 A/T overdrive disable 2 (OD2); OEM-E10-3 A/T kickdown switch (KD); OEM-E10-34 A/C request (A/C); OEM-E10-35 Power steering switch (PS); OEM-E10-4 Stop light switch (STP); OEM-E10-5 Cat-temp warning light (EGW); OEM-E10-6 Check-engine light (W); OEM-E10-9 A/T 2nd-gear indicator (2); OEM-E9-24 A/T oil temperature (OIL); OEM-E9-28 Voltage feedback 2 (VF2); OEM-E9-29 Voltage feedback 1 (VF1); OEM-E9-3 No.2 speed sensor return (SP2-); OEM-E9-32 ISC stepper coil 4 (ISC4); OEM-E9-33 ISC stepper coil 3 (ISC3); OEM-E9-39 ACIS intake VSV; OEM-E9-45 Intake air temperature (THA); OEM-E9-49 Knock sensor 2 (KNK2, rear); OEM-E9-58 Igniter verification (IGF); OEM-E9-64 TPS idle switch (IDL1); OEM-E9-74 EVAP purge VSV; OEM-E9-76 Neutral/park switch (NSW); OEM-E9-77 Starter signal (STA); OEM-E9-8 A/T lock-up solenoid (S3) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-E10 1: Ignition switch (IGSW): key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); Link G4X MonsoonX has no dedicated key-on input Not wired: - OEM-E10 33: Battery constant (BATT): Link G4X MonsoonX has no battery-constant input; not needed - OEM-E9 49: Knock sensor 2 (KNK2, rear): no free knock input on Link G4X MonsoonX - OEM-E9 33: ISC stepper coil 3 (ISC3): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E9 32: ISC stepper coil 4 (ISC4): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E10 22: Fuel pump control (FPC): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E10 5: Cat-temp warning light (EGW): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E10 6: Check-engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E9 39: ACIS intake VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E9 74: EVAP purge VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E9 8: A/T lock-up solenoid (S3): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G4X MonsoonX - OEM-E9 24: A/T oil temperature (OIL): no free thermistor/analog_0_5 on Link G4X MonsoonX - OEM-E9 45: Intake air temperature (THA): no free thermistor/analog_0_5 on Link G4X MonsoonX - OEM-E9 3: No.2 speed sensor return (SP2-): no free frequency_in/switch_in on Link G4X MonsoonX - OEM-E10 21: Fuel pump diagnostic (DI): no free frequency_in/switch_in on Link G4X MonsoonX - OEM-E9 58: Igniter verification (IGF): no free frequency_in/switch_in on Link G4X MonsoonX - OEM-E10 12: A/T overdrive disable 1 (OD1): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 20: Diagnostic test 1 (TE1): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 19: Diagnostic test 2 (TE2): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 28: A/T overdrive disable 2 (OD2): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 9: A/T 2nd-gear indicator (2): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 10: A/T low-gear indicator (L): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 15: Electrical load sense (ELS): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 17: Diagnostic test terminal (TT): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 18: A/T manual mode select (M): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 25: A/T manual indicator (MI): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 3: A/T kickdown switch (KD): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 34: A/C request (A/C): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 35: Power steering switch (PS): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E10 4: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E9 64: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E9 76: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E9 77: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on Link G4X MonsoonX - OEM-E9 29: Voltage feedback 1 (VF1): no free analog_out on Link G4X MonsoonX - OEM-E9 28: Voltage feedback 2 (VF2): no free analog_out on Link G4X MonsoonX
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link: G4X MonsoonX quickstart + RET 115-1000 | https://linkecu.com/documentation/MonsoonXQuickstartGuide.pdf | archive | 2026-10-05 | e8d432b273d6 |
| 3 | community_copy | YourSpec: Link G4X MonsoonX flying-lead harness wiring list | https://wpm.yourspec.com/projects/view/1469 | — | — | — |
| 3 | community_copy | wilbo666: 2JZ-GE JZA80 Supra Engine Wiring (ECU pinout, E10/E9) | http://wilbo666.pbworks.com/w/page/41678224/2JZ-GE%20JZA80%20Supra%20Engine%20Wiring | — | — | — |