Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) → Link G5 Voodoo Pro V1 (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 7: read the Findings page before cutting any wire |
| Size of the job | 59 wires · 6 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E10-1 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E9-10 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E9-35 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E9-34 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E9-9 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E9-33 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E9-32 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E10-22 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E10-5 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E10-6 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-39 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-8 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E10-29 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E9-24 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E9-45 | G5VOODOOPROV-B-B7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E9-23 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E9-3 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E10-21 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E9-58 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E10-12 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E10-20 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E10-19 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E10-28 | G5VOODOOPROV-B-B27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E10-9 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E10-10 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E10-15 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E10-17 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E10-18 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E10-25 | G5VOODOOPROV-B-B31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E10-3 | G5VOODOOPROV-B-B32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E10-34 | G5VOODOOPROV-E-E12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E10-35 | G5VOODOOPROV-E-E13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E10-4 | G5VOODOOPROV-B-B14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-E9-4 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W15 | — | 0.5 | OEM-E9-17 | — | — | — |
| A10 | Ignition 4 | — | — | — | — | — | — | — | — |
| A11 | Ignition 3 | — | — | — | — | — | — | — | — |
| A12 | Ignition 2 | — | — | — | — | — | — | — | — |
| A13 | Ignition 1 | — | W11 | — | 0.5 | OEM-E9-57 | — | — | — |
| A14 | Analogue Volt 4 | — | W37 | — | 0.5 | OEM-E9-48 | — | — | — |
| A15 | Analogue Temp 1 | — | W21 | — | 0.5 | OEM-E9-44 | — | — | — |
| A16 | Analogue Temp 2 | — | W38 | — | 0.5 | OEM-E10-29 | — | — | — |
| A17 | Analogue Volt 1 | — | W19 | — | 0.5 | OEM-E9-62 | — | — | — |
| A18 | Aux 4 | — | W25 | — | 0.5 | OEM-E9-35 | — | — | — |
| A19 | Aux 3 | — | W24 | — | 0.5 | OEM-E9-10 | — | — | — |
| A2 | Injection 3 | — | W14 | — | 0.5 | OEM-E9-18 | — | — | — |
| A20 | Aux 2 | — | W23 | — | 0.5 | OEM-E10-24 | — | — | — |
| A21 | Aux 1 | — | W22 | — | 0.5 | OEM-E10-23 | — | — | — |
| A22 | Analogue Volt 2 | — | W20 | — | 0.5 | OEM-E9-43 | — | — | — |
| A23 | Digital Input 3 | — | W42 | — | 0.5 | OEM-E9-23 | — | — | — |
| A26 | Aux 8 | — | W31 | — | 0.5 | OEM-E10-5 | — | — | — |
| A27 | Aux 7 | — | W30 | — | 0.5 | OEM-E10-22 | — | — | — |
| A28 | Aux 6 | — | W29 | — | 0.5 | OEM-E9-32 | — | — | — |
| A29 | Aux 5 | — | W28 | — | 0.5 | OEM-E9-33 | — | — | — |
| A3 | Injection 2 | — | W13 | — | 0.5 | OEM-E9-19 | — | — | — |
| A30 | Digital Input 1 | — | W8 | — | 0.5 | OEM-E9-25 | — | — | — |
| A31 | Digital Input 2 | — | W41 | — | 0.5 | OEM-E10-2 | — | — | — |
| A32 | +5V Out | — | W5 | — | 0.5 | OEM-E9-41 | — | — | — |
| A33 | Analogue Volt 3 | — | W36 | — | 0.5 | OEM-E9-47 | — | — | — |
| A4 | Injection 1 | — | W12 | — | 0.5 | OEM-E9-20 | — | — | — |
| A6 | Ignition Switch | — | W18 | — | 0.5 | OEM-E10-1 | — | — | — |
| A8 | Trigger 1 | — | W6 | — | 0.5 | OEM-E9-27 | — | — | — |
| A9 | Trigger 2 | — | W7 | — | 0.5 | OEM-E9-26 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W33 | — | 0.5 | OEM-E9-39 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | — | — | — | — | — | — | — |
| B13 | Ignition 5 | — | — | — | — | — | — | — | — |
| B14 | Analogue Volt 14 | — | W59 | — | 0.5 | OEM-E10-4 | — | — | — |
| B15 | Analogue Volt 6 | — | W51 | — | 0.5 | OEM-E10-10 | — | — | — |
| B16 | Analogue Volt 7 | — | W52 | — | 0.5 | OEM-E10-15 | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W45 | — | 0.5 | OEM-E9-58 | — | — | — |
| B2 | Injection 7 | — | W32 | — | 0.5 | OEM-E10-6 | — | — | — |
| B20 | Digital Input 5 | — | W44 | — | 0.5 | OEM-E10-21 | — | — | — |
| B21 | Digital Input 4 | — | W43 | — | 0.5 | OEM-E9-3 | — | — | — |
| B23 | Analogue Volt 8 | — | W53 | — | 0.5 | OEM-E10-17 | — | — | — |
| B24 | Analogue Volt 9 | — | W54 | — | 0.5 | OEM-E10-18 | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | W49 | — | 0.5 | OEM-E10-28 | — | — | — |
| B28 | Digital Input 9 | — | W48 | — | 0.5 | OEM-E10-19 | — | — | — |
| B29 | Digital Input 8 | — | W47 | — | 0.5 | OEM-E10-20 | — | — | — |
| B3 | Injection 6 | — | W17 | — | 0.5 | OEM-E9-15 | — | — | — |
| B30 | Digital Input 7 | — | W46 | — | 0.5 | OEM-E10-12 | — | — | — |
| B31 | Analogue Volt 10 | — | W55 | — | 0.5 | OEM-E10-25 | — | — | — |
| B32 | Analogue Volt 11 | — | W56 | — | 0.5 | OEM-E10-3 | — | — | — |
| B33 | Analogue Volt 5 | — | W50 | — | 0.5 | OEM-E10-9 | — | — | — |
| B4 | Injection 5 | — | W16 | — | 0.5 | OEM-E9-16 | — | — | — |
| B6 | Analogue Temp 3 | — | W39 | — | 0.5 | OEM-E9-24 | — | — | — |
| B7 | Analogue Temp 4 | — | W40 | — | 0.5 | OEM-E9-45 | — | — | — |
| B8 | Knock 2 | — | W10 | — | 0.5 | OEM-E9-49 | — | — | — |
| B9 | Knock 1 | — | W9 | — | 0.5 | OEM-E9-50 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | W57 | — | 0.5 | OEM-E10-34 | — | — | — |
| E13 | Analogue Volt 13 | — | W58 | — | 0.5 | OEM-E10-35 | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W26 | — | 0.5 | OEM-E9-34 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W27 | — | 0.5 | OEM-E9-9 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | W35 | — | 0.5 | OEM-E9-8 | — | — | — |
| E4 | Injection 9 | — | W34 | — | 0.5 | OEM-E9-74 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W18 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 10 | A/T low-gear indicator (L) | — | W51 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 12 | A/T overdrive disable 1 (OD1) | — | W46 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 15 | Electrical load sense (ELS) | — | W52 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 17 | Diagnostic test terminal (TT) | — | W53 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
| 18 | A/T manual mode select (M) | — | W54 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 19 | Diagnostic test 2 (TE2) | — | W48 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 2 | No.1 speed sensor (SP1) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 20 | Diagnostic test 1 (TE1) | — | W47 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | W44 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 22 | Fuel pump control (FPC) | — | W30 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W22 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 24 | EFI main relay control (M-REL) | — | W23 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 25 | A/T manual indicator (MI) | — | W55 | — | 0.5 | G5VOODOOPROV-B-B31 | — | — | — |
| 28 | A/T overdrive disable 2 (OD2) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B27 | — | — | — |
| 29 | Cat temperature sensor (CCO) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 3 | A/T kickdown switch (KD) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B32 | — | — | — |
| 31 | EFI main relay power (+B) | — | — | — | — | — | — | — | — |
| 32 | EFI main relay power (+B1) | — | — | — | — | — | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 34 | A/C request (A/C) | — | W57 | — | 0.5 | G5VOODOOPROV-E-E12 | — | — | — |
| 35 | Power steering switch (PS) | — | W58 | — | 0.5 | G5VOODOOPROV-E-E13 | — | — | — |
| 4 | Stop light switch (STP) | — | W59 | — | 0.5 | G5VOODOOPROV-B-B14 | — | — | — |
| 5 | Cat-temp warning light (EGW) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 6 | Check-engine light (W) | — | W32 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 9 | A/T 2nd-gear indicator (2) | — | W50 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | A/T shift solenoid 1 (S1) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 15 | Injector 6 (#60, rear) | — | W17 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 16 | Injector 5 (#50) | — | W16 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 17 | Injector 4 (#40) | — | W15 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 18 | Injector 3 (#30) | — | W14 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 19 | Injector 2 (#20) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 20 | Injector 1 (#10, front) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 23 | No.2 speed sensor (SP2+) | — | W42 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 24 | A/T oil temperature (OIL) | — | W39 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 25 | Cam position 2 (G2) | — | W8 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 26 | Cam position 1 (G1) | — | W7 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 27 | Crank position (NE) | — | W6 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 28 | Voltage feedback 2 (VF2) | — | — | — | — | — | — | — | — |
| 29 | Voltage feedback 1 (VF1) | — | — | — | — | — | — | — | — |
| 3 | No.2 speed sensor return (SP2-) | — | W43 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 32 | ISC stepper coil 4 (ISC4) | — | W29 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 33 | ISC stepper coil 3 (ISC3) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 34 | ISC stepper coil 2 (ISC2) | — | W26 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 35 | ISC stepper coil 1 (ISC1) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 39 | ACIS intake VSV | — | W33 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 4 | Power ground (E11) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W5 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 43 | Throttle position (VTA1) | — | W20 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 44 | Coolant temperature (THW) | — | W21 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 45 | Intake air temperature (THA) | — | W40 | — | 0.5 | G5VOODOOPROV-B-B7 | — | — | — |
| 47 | O2 sensor 2 (OX2, rear bank) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 48 | O2 sensor 1 (OX1, front bank) | — | W37 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 49 | Knock sensor 2 (KNK2, rear) | — | W10 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 50 | Knock sensor 1 (KNK1, front) | — | W9 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 57 | Igniter trigger (IGT) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 58 | Igniter verification (IGF) | — | W45 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 62 | Manifold pressure (PIM) | — | W19 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 64 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 65 | Sensor ground (E2) | — | — | — | — | — | — | — | — |
| 69 | Power ground (E1) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Distributor ground (G-) | — | — | — | — | — | — | — | — |
| 74 | EVAP purge VSV | — | W34 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 76 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 77 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 79 | Power ground (E02) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | A/T lock-up solenoid (S3) | — | W35 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 80 | Power ground (E01) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | A/T shift solenoid 2 (S2) | — | W27 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-E9-80 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | single_source | |
| OEM-E10-10 | A/T low-gear indicator (L) | digital_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-E10-12 | A/T overdrive disable 1 (OD1) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-E10-15 | Electrical load sense (ELS) | digital_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-E10-17 | Diagnostic test terminal (TT) | digital_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | single_source | |
| OEM-E10-18 | A/T manual mode select (M) | digital_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | single_source | |
| OEM-E10-19 | Diagnostic test 2 (TE2) | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-E10-2 | No.1 speed sensor (SP1) | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-E10-20 | Diagnostic test 1 (TE1) | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-E10-24 | EFI main relay control (M-REL) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-E10-25 | A/T manual indicator (MI) | digital_in | G5VOODOOPROV-B-B31 | Analogue Volt 10 | analog_in | single_source | |
| OEM-E10-28 | A/T overdrive disable 2 (OD2) | digital_in | G5VOODOOPROV-B-B27 | Digital Input 10 | digital_in | single_source | |
| OEM-E10-29 | Cat temperature sensor (CCO) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-E10-3 | A/T kickdown switch (KD) | digital_in | G5VOODOOPROV-B-B32 | Analogue Volt 11 | analog_in | single_source | |
| OEM-E10-31 | EFI main relay power (+B) | power_in | — | — | — | single_source | |
| OEM-E10-32 | EFI main relay power (+B1) | power_in | — | — | — | single_source | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-34 | A/C request (A/C) | digital_in | G5VOODOOPROV-E-E12 | Analogue Volt 12 | analog_in | single_source | |
| OEM-E10-35 | Power steering switch (PS) | digital_in | G5VOODOOPROV-E-E13 | Analogue Volt 13 | analog_in | single_source | |
| OEM-E10-4 | Stop light switch (STP) | digital_in | G5VOODOOPROV-B-B14 | Analogue Volt 14 | analog_in | single_source | |
| OEM-E10-5 | Cat-temp warning light (EGW) | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-E10-6 | Check-engine light (W) | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-E10-9 | A/T 2nd-gear indicator (2) | digital_in | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_in | single_source | |
| OEM-E9-10 | A/T shift solenoid 1 (S1) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-E9-15 | Injector 6 (#60, rear) | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-E9-16 | Injector 5 (#50) | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-E9-17 | Injector 4 (#40) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-E9-18 | Injector 3 (#30) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-E9-19 | Injector 2 (#20) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source | |
| OEM-E9-20 | Injector 1 (#10, front) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-E9-23 | No.2 speed sensor (SP2+) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-E9-24 | A/T oil temperature (OIL) | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | single_source | |
| OEM-E9-25 | Cam position 2 (G2) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-E9-26 | Cam position 1 (G1) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-E9-27 | Crank position (NE) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-E9-28 | Voltage feedback 2 (VF2) | analog_out | — | — | — | single_source | |
| OEM-E9-29 | Voltage feedback 1 (VF1) | analog_out | — | — | — | single_source | |
| OEM-E9-3 | No.2 speed sensor return (SP2-) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-E9-32 | ISC stepper coil 4 (ISC4) | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-E9-33 | ISC stepper coil 3 (ISC3) | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source | |
| OEM-E9-34 | ISC stepper coil 2 (ISC2) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-E9-35 | ISC stepper coil 1 (ISC1) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-E9-39 | ACIS intake VSV | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-E9-4 | Power ground (E11) | ground | — | — | — | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | single_source | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | single_source | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | G5VOODOOPROV-B-B7 | Analogue Temp 4 | temp_in | single_source | |
| OEM-E9-47 | O2 sensor 2 (OX2, rear bank) | lambda_nb_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1, front bank) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | single_source | |
| OEM-E9-49 | Knock sensor 2 (KNK2, rear) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | single_source | |
| OEM-E9-50 | Knock sensor 1 (KNK1, front) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-E9-57 | Igniter trigger (IGT) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-E9-58 | Igniter verification (IGF) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-E9-62 | Manifold pressure (PIM) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-E9-64 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | — | — | — | single_source | |
| OEM-E9-69 | Power ground (E1) | ground | — | — | — | single_source | |
| OEM-E9-7 | Distributor ground (G-) | sensor_ground | — | — | — | single_source | |
| OEM-E9-74 | EVAP purge VSV | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-E9-76 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-E9-77 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-E9-79 | Power ground (E02) | ground | — | — | — | single_source | |
| OEM-E9-8 | A/T lock-up solenoid (S3) | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | single_source | |
| OEM-E9-80 | Power ground (E01) | ground | — | — | — | single_source | |
| OEM-E9-9 | A/T shift solenoid 2 (S2) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W2 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W3 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W4 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W5 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W6 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position (NE) | — | |
| W7 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | no route | Cam position 1 (G1) | — | |
| W8 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | no route | Cam position 2 (G2) | — | |
| W9 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W10 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W11 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | no route | Igniter trigger (IGT) | — | |
| W12 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 (#10, front) | — | |
| W13 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 (#20) | — | |
| W14 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 (#30) | — | |
| W15 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 (#40) | — | |
| W16 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 5 (#50) | — | |
| W17 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 6 (#60, rear) | — | |
| W18 | OEM-E10-1 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W19 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W20 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position (VTA1) | — | |
| W21 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W22 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W23 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W24 | OEM-E9-10 | G5VOODOOPROV-A-A19 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W25 | OEM-E9-35 | G5VOODOOPROV-A-A18 | 0.5 | no route | ISC stepper coil 1 (ISC1) | — | |
| W26 | OEM-E9-34 | G5VOODOOPROV-E-E15 | 0.5 | no route | ISC stepper coil 2 (ISC2) | — | |
| W27 | OEM-E9-9 | G5VOODOOPROV-E-E22 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W28 | OEM-E9-33 | G5VOODOOPROV-A-A29 | 0.5 | no route | ISC stepper coil 3 (ISC3) | — | |
| W29 | OEM-E9-32 | G5VOODOOPROV-A-A28 | 0.5 | no route | ISC stepper coil 4 (ISC4) | — | |
| W30 | OEM-E10-22 | G5VOODOOPROV-A-A27 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W31 | OEM-E10-5 | G5VOODOOPROV-A-A26 | 0.5 | no route | Cat-temp warning light (EGW) | — | |
| W32 | OEM-E10-6 | G5VOODOOPROV-B-B2 | 0.5 | no route | Check-engine light (W) | — | |
| W33 | OEM-E9-39 | G5VOODOOPROV-B-B1 | 0.5 | no route | ACIS intake VSV | — | |
| W34 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | no route | EVAP purge VSV | — | |
| W35 | OEM-E9-8 | G5VOODOOPROV-E-E3 | 0.5 | no route | A/T lock-up solenoid (S3) | — | |
| W36 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | no route | O2 sensor 2 (OX2, rear bank) | — | |
| W37 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 sensor 1 (OX1, front bank) | — | |
| W38 | OEM-E10-29 | G5VOODOOPROV-A-A16 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W39 | OEM-E9-24 | G5VOODOOPROV-B-B6 | 0.5 | no route | A/T oil temperature (OIL) | — | |
| W40 | OEM-E9-45 | G5VOODOOPROV-B-B7 | 0.5 | no route | Intake air temperature (THA) | — | |
| W41 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W42 | OEM-E9-23 | G5VOODOOPROV-A-A23 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W43 | OEM-E9-3 | G5VOODOOPROV-B-B21 | 0.5 | no route | No.2 speed sensor return (SP2-) | — | |
| W44 | OEM-E10-21 | G5VOODOOPROV-B-B20 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W45 | OEM-E9-58 | G5VOODOOPROV-B-B19 | 0.5 | no route | Igniter verification (IGF) | — | |
| W46 | OEM-E10-12 | G5VOODOOPROV-B-B30 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W47 | OEM-E10-20 | G5VOODOOPROV-B-B29 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W48 | OEM-E10-19 | G5VOODOOPROV-B-B28 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W49 | OEM-E10-28 | G5VOODOOPROV-B-B27 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W50 | OEM-E10-9 | G5VOODOOPROV-B-B33 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W51 | OEM-E10-10 | G5VOODOOPROV-B-B15 | 0.5 | no route | A/T low-gear indicator (L) | — | |
| W52 | OEM-E10-15 | G5VOODOOPROV-B-B16 | 0.5 | no route | Electrical load sense (ELS) | — | |
| W53 | OEM-E10-17 | G5VOODOOPROV-B-B23 | 0.5 | no route | Diagnostic test terminal (TT) | — | |
| W54 | OEM-E10-18 | G5VOODOOPROV-B-B24 | 0.5 | no route | A/T manual mode select (M) | — | |
| W55 | OEM-E10-25 | G5VOODOOPROV-B-B31 | 0.5 | no route | A/T manual indicator (MI) | — | |
| W56 | OEM-E10-3 | G5VOODOOPROV-B-B32 | 0.5 | no route | A/T kickdown switch (KD) | — | |
| W57 | OEM-E10-34 | G5VOODOOPROV-E-E12 | 0.5 | no route | A/C request (A/C) | — | |
| W58 | OEM-E10-35 | G5VOODOOPROV-E-E13 | 0.5 | no route | Power steering switch (PS) | — | |
| W59 | OEM-E10-4 | G5VOODOOPROV-B-B14 | 0.5 | no route | Stop light switch (STP) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (29)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-E10-31 | Required OEM function "EFI main relay power (+B)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E10-32 | Required OEM function "EFI main relay power (+B1)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-4 | Required OEM function "Power ground (E11)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-65 | Required OEM function "Sensor ground (E2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-69 | Required OEM function "Power ground (E1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-79 | Required OEM function "Power ground (E02)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-80 | Required OEM function "Power ground (E01)" (ground) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-E10-24 EFI main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-E10-23 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-E10-10 ↔ G5VOODOOPROV-B-B15 | OEM-E10-10 "A/T low-gear indicator (L)" [digital_in] is wired to G5VOODOOPROV-B-B15 "Analogue Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-15 ↔ G5VOODOOPROV-B-B16 | OEM-E10-15 "Electrical load sense (ELS)" [digital_in] is wired to G5VOODOOPROV-B-B16 "Analogue Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-17 ↔ G5VOODOOPROV-B-B23 | OEM-E10-17 "Diagnostic test terminal (TT)" [digital_in] is wired to G5VOODOOPROV-B-B23 "Analogue Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-18 ↔ G5VOODOOPROV-B-B24 | OEM-E10-18 "A/T manual mode select (M)" [digital_in] is wired to G5VOODOOPROV-B-B24 "Analogue Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-25 ↔ G5VOODOOPROV-B-B31 | OEM-E10-25 "A/T manual indicator (MI)" [digital_in] is wired to G5VOODOOPROV-B-B31 "Analogue Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-3 ↔ G5VOODOOPROV-B-B32 | OEM-E10-3 "A/T kickdown switch (KD)" [digital_in] is wired to G5VOODOOPROV-B-B32 "Analogue Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-34 ↔ G5VOODOOPROV-E-E12 | OEM-E10-34 "A/C request (A/C)" [digital_in] is wired to G5VOODOOPROV-E-E12 "Analogue Volt 12" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-35 ↔ G5VOODOOPROV-E-E13 | OEM-E10-35 "Power steering switch (PS)" [digital_in] is wired to G5VOODOOPROV-E-E13 "Analogue Volt 13" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-4 ↔ G5VOODOOPROV-B-B14 | OEM-E10-4 "Stop light switch (STP)" [digital_in] is wired to G5VOODOOPROV-B-B14 "Analogue Volt 14" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-9 ↔ G5VOODOOPROV-B-B33 | OEM-E10-9 "A/T 2nd-gear indicator (2)" [digital_in] is wired to G5VOODOOPROV-B-B33 "Analogue Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E9-25 ↔ G5VOODOOPROV-A-A30 | OEM-E9-25 "Cam position 2 (G2)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E10-22 ↔ G5VOODOOPROV-A-A27 | OEM-E10-22 "Fuel pump control (FPC)" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E10-5 ↔ G5VOODOOPROV-A-A26 | OEM-E10-5 "Cat-temp warning light (EGW)" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E10-6 ↔ G5VOODOOPROV-B-B2 | OEM-E10-6 "Check-engine light (W)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-32 ↔ G5VOODOOPROV-A-A28 | OEM-E9-32 "ISC stepper coil 4 (ISC4)" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-33 ↔ G5VOODOOPROV-A-A29 | OEM-E9-33 "ISC stepper coil 3 (ISC3)" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-39 ↔ G5VOODOOPROV-B-B1 | OEM-E9-39 "ACIS intake VSV" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-74 ↔ G5VOODOOPROV-E-E4 | OEM-E9-74 "EVAP purge VSV" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-8 ↔ G5VOODOOPROV-E-E3 | OEM-E9-8 "A/T lock-up solenoid (S3)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 6 optional OEM pins are not mapped: OEM-E9-28 Voltage feedback 2 (VF2); OEM-E9-29 Voltage feedback 1 (VF1); OEM-E9-64 TPS idle switch (IDL1); OEM-E9-7 Distributor ground (G-); OEM-E9-76 Neutral/park switch (NSW); OEM-E9-77 Starter signal (STA) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-E10 31: EFI main relay power (+B): no rule for class ecu_main_power; wire by hand - OEM-E10 32: EFI main relay power (+B1): no rule for class ecu_main_power; wire by hand - OEM-E9 65: Sensor ground (E2): no rule for class ground_sensor; wire by hand Not wired: - OEM-E10 33: Battery constant (BATT): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-E9 64: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-E9 76: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-E9 77: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on Link G5 Voodoo Pro V1 - OEM-E9 29: Voltage feedback 1 (VF1): no free analog_out on Link G5 Voodoo Pro V1 - OEM-E9 28: Voltage feedback 2 (VF2): no free analog_out on Link G5 Voodoo Pro V1 - OEM-E9 7: Distributor ground (G-): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 3 | community_copy | wilbo666: 2JZ-GE JZA80 Supra Engine Wiring (ECU pinout, E10/E9) | http://wilbo666.pbworks.com/w/page/41678224/2JZ-GE%20JZA80%20Supra%20Engine%20Wiring | — | — | — |