Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) → rusEFI Proteus (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GE, non-VVT) — rusEFI — Proteus
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 71 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E10-32 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E9-65 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E9-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E9-41 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E9-27 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E9-26 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E9-25 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E9-50 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-49 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-57 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-20 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E9-19 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E9-18 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E9-17 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E9-16 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E9-15 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E10-1 | PROTEUS-Black23-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E9-62 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E9-43 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E9-44 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E10-23 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E10-24 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E9-10 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E9-35 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E9-34 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E9-9 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E9-33 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E9-32 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E10-22 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E10-5 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E9-47 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E9-48 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E10-29 | PROTEUS-White35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E9-24 | PROTEUS-White35-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E9-45 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E10-2 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-E9-23 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E9-3 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E10-21 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-E9-58 | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-E10-12 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-E10-20 | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-E10-19 | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-E10-28 | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-E10-9 | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-E10-10 | PROTEUS-White35-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-E10-15 | PROTEUS-White35-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-Black23-23 | PROTEUS-Black23-12 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | PROTEUS-Black23-23 | PROTEUS-Black23-14 | open (OL) | +12 V supply must not touch power ground | |
| 3 | PROTEUS-White35-10 | PROTEUS-Black23-12 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 4 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-Black23-23 | PROTEUS-White35-10 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W41 | — | 0.5 | PROTEUS-Black23-18 | — | — | — |
| 10 | A/T low-gear indicator (L) | — | W70 | — | 0.5 | PROTEUS-White35-28 | — | — | — |
| 12 | A/T overdrive disable 1 (OD1) | — | W65 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| 15 | Electrical load sense (ELS) | — | W71 | — | 0.5 | PROTEUS-White35-18 | — | — | — |
| 17 | Diagnostic test terminal (TT) | — | — | — | — | — | — | — | — |
| 18 | A/T manual mode select (M) | — | — | — | — | — | — | — | — |
| 19 | Diagnostic test 2 (TE2) | — | W67 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| 2 | No.1 speed sensor (SP1) | — | W60 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 20 | Diagnostic test 1 (TE1) | — | W66 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | W63 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| 22 | Fuel pump control (FPC) | — | W53 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W45 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 24 | EFI main relay control (M-REL) | — | W46 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 25 | A/T manual indicator (MI) | — | — | — | — | — | — | — | — |
| 28 | A/T overdrive disable 2 (OD2) | — | W68 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
| 29 | Cat temperature sensor (CCO) | — | W57 | — | 0.5 | PROTEUS-White35-19 | — | — | — |
| 3 | A/T kickdown switch (KD) | — | — | — | — | — | — | — | — |
| 31 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 32 | EFI main relay power (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 34 | A/C request (A/C) | — | — | — | — | — | — | — | — |
| 35 | Power steering switch (PS) | — | — | — | — | — | — | — | — |
| 4 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 5 | Cat-temp warning light (EGW) | — | W54 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 6 | Check-engine light (W) | — | — | — | — | — | — | — | — |
| 9 | A/T 2nd-gear indicator (2) | — | W69 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | A/T shift solenoid 1 (S1) | — | W47 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 15 | Injector 6 (#60, rear) | — | W40 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 16 | Injector 5 (#50) | — | W39 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 17 | Injector 4 (#40) | — | W38 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 18 | Injector 3 (#30) | — | W37 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 19 | Injector 2 (#20) | — | W36 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| 20 | Injector 1 (#10, front) | — | W35 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 23 | No.2 speed sensor (SP2+) | — | W61 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 24 | A/T oil temperature (OIL) | — | W58 | — | 0.5 | PROTEUS-White35-31 | — | — | — |
| 25 | Cam position 2 (G2) | — | W31 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 26 | Cam position 1 (G1) | — | W29 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 27 | Crank position (NE) | — | W27 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 28 | Voltage feedback 2 (VF2) | — | — | — | — | — | — | — | — |
| 29 | Voltage feedback 1 (VF1) | — | — | — | — | — | — | — | — |
| 3 | No.2 speed sensor return (SP2-) | — | W62 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| 32 | ISC stepper coil 4 (ISC4) | — | W52 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 33 | ISC stepper coil 3 (ISC3) | — | W51 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 34 | ISC stepper coil 2 (ISC2) | — | W49 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 35 | ISC stepper coil 1 (ISC1) | — | W48 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 39 | ACIS intake VSV | — | — | — | — | — | — | — | — |
| 4 | Power ground (E11) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W26 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| 43 | Throttle position (VTA1) | — | W43 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 44 | Coolant temperature (THW) | — | W44 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 45 | Intake air temperature (THA) | — | W59 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 47 | O2 sensor 2 (OX2, rear bank) | — | W55 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 48 | O2 sensor 1 (OX1, front bank) | — | W56 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 49 | Knock sensor 2 (KNK2, rear) | — | W33 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 50 | Knock sensor 1 (KNK1, front) | — | W32 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 57 | Igniter trigger (IGT) | — | W34 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 58 | Igniter verification (IGF) | — | W64 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| 62 | Manifold pressure (PIM) | — | W42 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| 64 | TPS idle switch (IDL1) | — | — | — | — | — | — | — | — |
| 65 | Sensor ground (E2) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 69 | Power ground (E1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Distributor ground (G-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 74 | EVAP purge VSV | — | — | — | — | — | — | — | — |
| 76 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 77 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 79 | Power ground (E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | A/T lock-up solenoid (S3) | — | — | — | — | — | — | — | — |
| 80 | Power ground (E01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | A/T shift solenoid 2 (S2) | — | W50 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W31 | — | 0.5 | OEM-E9-25 | — | — | — |
| 10 | Digital 1 | — | W61 | — | 0.5 | OEM-E9-23 | — | — | — |
| 11 | Digital 6 | — | W64 | — | 0.5 | OEM-E9-58 | — | — | — |
| 12 | VR 2 negative | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | W41 | — | 0.5 | OEM-E10-1 | — | — | — |
| 19 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W60 | — | 0.5 | OEM-E10-2 | — | — | — |
| 20 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W62 | — | 0.5 | OEM-E9-3 | — | — | — |
| 4 | VR 2 positive | — | W29 | — | 0.5 | OEM-E9-26 | — | — | — |
| 5 | VR 1 positive | — | W27 | — | 0.5 | OEM-E9-27 | — | — | — |
| 6 | ETB 1 negative | — | — | — | — | — | — | — | — |
| 7 | ETB 1 positive | — | — | — | — | — | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W63 | — | 0.5 | OEM-E10-21 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W48 | — | 0.5 | OEM-E9-35 | — | — | — |
| 11 | Lowside 14 | — | W49 | — | 0.5 | OEM-E9-34 | — | — | — |
| 12 | Lowside 15 | — | W50 | — | 0.5 | OEM-E9-9 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W36 | — | 0.5 | OEM-E9-19 | — | — | — |
| 16 | Injector 4 | — | W38 | — | 0.5 | OEM-E9-17 | — | — | — |
| 17 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W53 | — | 0.5 | OEM-E10-22 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W45 | — | 0.5 | OEM-E10-23 | — | — | — |
| 21 | Lowside 12 | — | W47 | — | 0.5 | OEM-E9-10 | — | — | — |
| 22 | Ignition 3 | — | — | — | — | — | — | — | — |
| 23 | Lowside 16 | — | W51 | — | 0.5 | OEM-E9-33 | — | — | — |
| 24 | Power ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W35 | — | 0.5 | OEM-E9-20 | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | — | — | — | — | — | — | — |
| 32 | Ignition 5 | — | — | — | — | — | — | — | — |
| 33 | Ignition 4 | — | — | — | — | — | — | — | — |
| 34 | Ignition 2 | — | — | — | — | — | — | — | — |
| 35 | Ignition 1 | — | W34 | — | 0.5 | OEM-E9-57 | — | — | — |
| 4 | Injector 3 | — | W37 | — | 0.5 | OEM-E9-18 | — | — | — |
| 5 | Injector 5 | — | W39 | — | 0.5 | OEM-E9-16 | — | — | — |
| 6 | Injector 6 | — | W40 | — | 0.5 | OEM-E9-15 | — | — | — |
| 7 | Injector 7 | — | W52 | — | 0.5 | OEM-E9-32 | — | — | — |
| 8 | Injector 9 | — | W54 | — | 0.5 | OEM-E10-5 | — | — | — |
| 9 | Lowside 11 | — | W46 | — | 0.5 | OEM-E10-24 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W26 | — | 0.5 | OEM-E9-41 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W42 | — | 0.5 | OEM-E9-62 | — | — | — |
| 14 | Analog Volt 3 | — | W55 | — | 0.5 | OEM-E9-47 | — | — | — |
| 15 | Analog Volt 5 | — | W65 | — | 0.5 | OEM-E10-12 | — | — | — |
| 16 | Analog Volt 7 | — | W67 | — | 0.5 | OEM-E10-19 | — | — | — |
| 17 | Analog Volt 9 | — | W69 | — | 0.5 | OEM-E10-9 | — | — | — |
| 18 | Analog Volt 11 | — | W71 | — | 0.5 | OEM-E10-15 | — | — | — |
| 19 | Thermistor 1 | — | W57 | — | 0.5 | OEM-E10-29 | — | — | — |
| 2 | Sensor ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W44 | — | 0.5 | OEM-E9-44 | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W43 | — | 0.5 | OEM-E9-43 | — | — | — |
| 25 | Analog Volt 4 | — | W56 | — | 0.5 | OEM-E9-48 | — | — | — |
| 26 | Analog Volt 6 | — | W66 | — | 0.5 | OEM-E10-20 | — | — | — |
| 27 | Analog Volt 8 | — | W68 | — | 0.5 | OEM-E10-28 | — | — | — |
| 28 | Analog Volt 10 | — | W70 | — | 0.5 | OEM-E10-10 | — | — | — |
| 29 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W59 | — | 0.5 | OEM-E9-45 | — | — | — |
| 31 | Thermistor 4 | — | W58 | — | 0.5 | OEM-E9-24 | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W32 | — | 0.5 | OEM-E9-50 | — | — | — |
| 35 | Knock 2 | — | W33 | — | 0.5 | OEM-E9-49 | — | — | — |
| 4 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-E9-65 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-E9-7 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E10-31 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E10-32 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-E9-80 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | PROTEUS-Black23-18 | Ignition switch in | digital_in | single_source | |
| OEM-E10-10 | A/T low-gear indicator (L) | digital_in | PROTEUS-White35-28 | Analog Volt 10 | analog_in | single_source | |
| OEM-E10-12 | A/T overdrive disable 1 (OD1) | digital_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | single_source | |
| OEM-E10-15 | Electrical load sense (ELS) | digital_in | PROTEUS-White35-18 | Analog Volt 11 | analog_in | single_source | |
| OEM-E10-17 | Diagnostic test terminal (TT) | digital_in | — | — | — | single_source | |
| OEM-E10-18 | A/T manual mode select (M) | digital_in | — | — | — | single_source | |
| OEM-E10-19 | Diagnostic test 2 (TE2) | digital_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | single_source | |
| OEM-E10-2 | No.1 speed sensor (SP1) | digital_in | PROTEUS-Black23-2 | Digital 3 | digital_in | single_source | |
| OEM-E10-20 | Diagnostic test 1 (TE1) | digital_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | single_source | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | PROTEUS-Black35-19 | Injector 8 | injector_out | single_source | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | single_source | |
| OEM-E10-24 | EFI main relay control (M-REL) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | single_source | |
| OEM-E10-25 | A/T manual indicator (MI) | digital_in | — | — | — | single_source | |
| OEM-E10-28 | A/T overdrive disable 2 (OD2) | digital_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | single_source | |
| OEM-E10-29 | Cat temperature sensor (CCO) | temp_in | PROTEUS-White35-19 | Thermistor 1 | temp_in | single_source | |
| OEM-E10-3 | A/T kickdown switch (KD) | digital_in | — | — | — | single_source | |
| OEM-E10-31 | EFI main relay power (+B) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-E10-32 | EFI main relay power (+B1) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-34 | A/C request (A/C) | digital_in | — | — | — | single_source | |
| OEM-E10-35 | Power steering switch (PS) | digital_in | — | — | — | single_source | |
| OEM-E10-4 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-E10-5 | Cat-temp warning light (EGW) | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | single_source | |
| OEM-E10-6 | Check-engine light (W) | low_side_out | — | — | — | single_source | |
| OEM-E10-9 | A/T 2nd-gear indicator (2) | digital_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | single_source | |
| OEM-E9-10 | A/T shift solenoid 1 (S1) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | single_source | |
| OEM-E9-15 | Injector 6 (#60, rear) | injector_out | PROTEUS-Black35-6 | Injector 6 | injector_out | single_source | |
| OEM-E9-16 | Injector 5 (#50) | injector_out | PROTEUS-Black35-5 | Injector 5 | injector_out | single_source | |
| OEM-E9-17 | Injector 4 (#40) | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | single_source | |
| OEM-E9-18 | Injector 3 (#30) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | single_source | |
| OEM-E9-19 | Injector 2 (#20) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | single_source | |
| OEM-E9-20 | Injector 1 (#10, front) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | single_source | |
| OEM-E9-23 | No.2 speed sensor (SP2+) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-E9-24 | A/T oil temperature (OIL) | temp_in | PROTEUS-White35-31 | Thermistor 4 | temp_in | single_source | |
| OEM-E9-25 | Cam position 2 (G2) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | single_source | |
| OEM-E9-26 | Cam position 1 (G1) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | single_source | |
| OEM-E9-27 | Crank position (NE) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | single_source | |
| OEM-E9-28 | Voltage feedback 2 (VF2) | analog_out | — | — | — | single_source | |
| OEM-E9-29 | Voltage feedback 1 (VF1) | analog_out | — | — | — | single_source | |
| OEM-E9-3 | No.2 speed sensor return (SP2-) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-E9-32 | ISC stepper coil 4 (ISC4) | low_side_out | PROTEUS-Black35-7 | Injector 7 | injector_out | single_source | |
| OEM-E9-33 | ISC stepper coil 3 (ISC3) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | single_source | |
| OEM-E9-34 | ISC stepper coil 2 (ISC2) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | single_source | |
| OEM-E9-35 | ISC stepper coil 1 (ISC1) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | single_source | |
| OEM-E9-39 | ACIS intake VSV | low_side_out | — | — | — | single_source | |
| OEM-E9-4 | Power ground (E11) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | single_source | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | single_source | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | single_source | |
| OEM-E9-47 | O2 sensor 2 (OX2, rear bank) | lambda_nb_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1, front bank) | lambda_nb_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | single_source | |
| OEM-E9-49 | Knock sensor 2 (KNK2, rear) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | single_source | |
| OEM-E9-50 | Knock sensor 1 (KNK1, front) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | single_source | |
| OEM-E9-57 | Igniter trigger (IGT) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | single_source | |
| OEM-E9-58 | Igniter verification (IGF) | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-E9-62 | Manifold pressure (PIM) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-E9-64 | TPS idle switch (IDL1) | digital_in | — | — | — | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-E9-69 | Power ground (E1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-7 | Distributor ground (G-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-E9-74 | EVAP purge VSV | low_side_out | — | — | — | single_source | |
| OEM-E9-76 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-E9-77 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-E9-79 | Power ground (E02) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-8 | A/T lock-up solenoid (S3) | low_side_out | — | — | — | single_source | |
| OEM-E9-80 | Power ground (E01) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-9 | A/T shift solenoid 2 (S2) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-E10-32 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B1) | — | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W4 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W5 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W14 | OEM-E9-65 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W15 | OEM-E9-7 | SP-0V-1 | 0.5 | no route | Distributor ground (G-) | — | |
| W16 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W17 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W18 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W25 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W26 | OEM-E9-41 | PROTEUS-White35-10 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W27 | OEM-E9-27 | PROTEUS-Black23-5 | 0.5 | no route | Crank position (NE) | — | |
| W28 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W29 | OEM-E9-26 | PROTEUS-Black23-4 | 0.5 | no route | Cam position 1 (G1) | — | |
| W30 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W31 | OEM-E9-25 | PROTEUS-Black23-1 | 0.5 | no route | Cam position 2 (G2) | — | |
| W32 | OEM-E9-50 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W33 | OEM-E9-49 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W34 | OEM-E9-57 | PROTEUS-Black35-35 | 0.5 | no route | Igniter trigger (IGT) | — | |
| W35 | OEM-E9-20 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 (#10, front) | — | |
| W36 | OEM-E9-19 | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 (#20) | — | |
| W37 | OEM-E9-18 | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 (#30) | — | |
| W38 | OEM-E9-17 | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 (#40) | — | |
| W39 | OEM-E9-16 | PROTEUS-Black35-5 | 0.5 | no route | Injector 5 (#50) | — | |
| W40 | OEM-E9-15 | PROTEUS-Black35-6 | 0.5 | no route | Injector 6 (#60, rear) | — | |
| W41 | OEM-E10-1 | PROTEUS-Black23-18 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W42 | OEM-E9-62 | PROTEUS-White35-13 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W43 | OEM-E9-43 | PROTEUS-White35-24 | 0.5 | no route | Throttle position (VTA1) | — | |
| W44 | OEM-E9-44 | PROTEUS-White35-20 | 0.5 | no route | Coolant temperature (THW) | — | |
| W45 | OEM-E10-23 | PROTEUS-Black35-20 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W46 | OEM-E10-24 | PROTEUS-Black35-9 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W47 | OEM-E9-10 | PROTEUS-Black35-21 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W48 | OEM-E9-35 | PROTEUS-Black35-10 | 0.5 | no route | ISC stepper coil 1 (ISC1) | — | |
| W49 | OEM-E9-34 | PROTEUS-Black35-11 | 0.5 | no route | ISC stepper coil 2 (ISC2) | — | |
| W50 | OEM-E9-9 | PROTEUS-Black35-12 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W51 | OEM-E9-33 | PROTEUS-Black35-23 | 0.5 | no route | ISC stepper coil 3 (ISC3) | — | |
| W52 | OEM-E9-32 | PROTEUS-Black35-7 | 0.5 | no route | ISC stepper coil 4 (ISC4) | — | |
| W53 | OEM-E10-22 | PROTEUS-Black35-19 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W54 | OEM-E10-5 | PROTEUS-Black35-8 | 0.5 | no route | Cat-temp warning light (EGW) | — | |
| W55 | OEM-E9-47 | PROTEUS-White35-14 | 0.5 | no route | O2 sensor 2 (OX2, rear bank) | — | |
| W56 | OEM-E9-48 | PROTEUS-White35-25 | 0.5 | no route | O2 sensor 1 (OX1, front bank) | — | |
| W57 | OEM-E10-29 | PROTEUS-White35-19 | 0.5 | no route | Cat temperature sensor (CCO) | — | |
| W58 | OEM-E9-24 | PROTEUS-White35-31 | 0.5 | no route | A/T oil temperature (OIL) | — | |
| W59 | OEM-E9-45 | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (THA) | — | |
| W60 | OEM-E10-2 | PROTEUS-Black23-2 | 0.5 | no route | No.1 speed sensor (SP1) | — | |
| W61 | OEM-E9-23 | PROTEUS-Black23-10 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W62 | OEM-E9-3 | PROTEUS-Black23-3 | 0.5 | no route | No.2 speed sensor return (SP2-) | — | |
| W63 | OEM-E10-21 | PROTEUS-Black23-9 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W64 | OEM-E9-58 | PROTEUS-Black23-11 | 0.5 | no route | Igniter verification (IGF) | — | |
| W65 | OEM-E10-12 | PROTEUS-White35-15 | 0.5 | no route | A/T overdrive disable 1 (OD1) | — | |
| W66 | OEM-E10-20 | PROTEUS-White35-26 | 0.5 | no route | Diagnostic test 1 (TE1) | — | |
| W67 | OEM-E10-19 | PROTEUS-White35-16 | 0.5 | no route | Diagnostic test 2 (TE2) | — | |
| W68 | OEM-E10-28 | PROTEUS-White35-27 | 0.5 | no route | A/T overdrive disable 2 (OD2) | — | |
| W69 | OEM-E10-9 | PROTEUS-White35-17 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W70 | OEM-E10-10 | PROTEUS-White35-28 | 0.5 | no route | A/T low-gear indicator (L) | — | |
| W71 | OEM-E10-15 | PROTEUS-White35-18 | 0.5 | no route | Electrical load sense (ELS) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (12)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-E10-10 ↔ PROTEUS-White35-28 | OEM-E10-10 "A/T low-gear indicator (L)" [digital_in] is wired to PROTEUS-White35-28 "Analog Volt 10" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-12 ↔ PROTEUS-White35-15 | OEM-E10-12 "A/T overdrive disable 1 (OD1)" [digital_in] is wired to PROTEUS-White35-15 "Analog Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-15 ↔ PROTEUS-White35-18 | OEM-E10-15 "Electrical load sense (ELS)" [digital_in] is wired to PROTEUS-White35-18 "Analog Volt 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-19 ↔ PROTEUS-White35-16 | OEM-E10-19 "Diagnostic test 2 (TE2)" [digital_in] is wired to PROTEUS-White35-16 "Analog Volt 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-20 ↔ PROTEUS-White35-26 | OEM-E10-20 "Diagnostic test 1 (TE1)" [digital_in] is wired to PROTEUS-White35-26 "Analog Volt 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-28 ↔ PROTEUS-White35-27 | OEM-E10-28 "A/T overdrive disable 2 (OD2)" [digital_in] is wired to PROTEUS-White35-27 "Analog Volt 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-E10-9 ↔ PROTEUS-White35-17 | OEM-E10-9 "A/T 2nd-gear indicator (2)" [digital_in] is wired to PROTEUS-White35-17 "Analog Volt 9" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-E10-22 ↔ PROTEUS-Black35-19 | OEM-E10-22 "Fuel pump control (FPC)" [low_side_out] is wired to PROTEUS-Black35-19 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E10-5 ↔ PROTEUS-Black35-8 | OEM-E10-5 "Cat-temp warning light (EGW)" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-32 ↔ PROTEUS-Black35-7 | OEM-E9-32 "ISC stepper coil 4 (ISC4)" [low_side_out] is wired to PROTEUS-Black35-7 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | PROTEUS-White35-3 ↔ PROTEUS-Black23-12 | PROTEUS-White35-3 "Sensor ground" [sensor_ground] is wired to PROTEUS-Black23-12 "VR 2 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 16 optional OEM pins are not mapped: OEM-E10-17 Diagnostic test terminal (TT); OEM-E10-18 A/T manual mode select (M); OEM-E10-25 A/T manual indicator (MI); OEM-E10-3 A/T kickdown switch (KD); OEM-E10-34 A/C request (A/C); OEM-E10-35 Power steering switch (PS); OEM-E10-4 Stop light switch (STP); OEM-E10-6 Check-engine light (W); OEM-E9-28 Voltage feedback 2 (VF2); OEM-E9-29 Voltage feedback 1 (VF1); OEM-E9-39 ACIS intake VSV; OEM-E9-64 TPS idle switch (IDL1); OEM-E9-74 EVAP purge VSV; OEM-E9-76 Neutral/park switch (NSW); OEM-E9-77 Starter signal (STA); OEM-E9-8 A/T lock-up solenoid (S3) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-E10 33: Battery constant (BATT): rusEFI Proteus has no battery-constant input; not needed - OEM-E10 6: Check-engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E9 39: ACIS intake VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E9 74: EVAP purge VSV: no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E9 8: A/T lock-up solenoid (S3): no free low_side/relay_control/heater_low_side/ls_hs/injector on rusEFI Proteus - OEM-E10 17: Diagnostic test terminal (TT): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 18: A/T manual mode select (M): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 25: A/T manual indicator (MI): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 3: A/T kickdown switch (KD): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 34: A/C request (A/C): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 35: Power steering switch (PS): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E10 4: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E9 64: TPS idle switch (IDL1): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E9 76: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E9 77: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-E9 29: Voltage feedback 1 (VF1): no free analog_out on rusEFI Proteus - OEM-E9 28: Voltage feedback 2 (VF2): no free analog_out on rusEFI Proteus
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |
| 3 | community_copy | wilbo666: 2JZ-GE JZA80 Supra Engine Wiring (ECU pinout, E10/E9) | http://wilbo666.pbworks.com/w/page/41678224/2JZ-GE%20JZA80%20Supra%20Engine%20Wiring | — | — | — |