Toyota Supra A80 1997-2002 JDM (2JZ-GTE VVT-i, single-turbo) → AMP EFI MS3Pro EVO+ (auto)
Toyota Supra A80 1997-2002 JDM (2JZ-GTE VVT-i, single-turbo) — AMP EFI — MS3Pro EVO+
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 3: read the Findings page before cutting any wire |
| Size of the job | 82 wires · 13 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | MS3PROEVO-A-35 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-B74-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-B74-31 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-B74-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-B75-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | MS3PROEVO-B-3 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | MS3PROEVO-B-5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | MS3PROEVO-B-7 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | MS3PROEVO-B-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-B74-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-B75-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-B75-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-B78-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | MS3PROEVO-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | MS3PROEVO-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | MS3PROEVO-C-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | MS3PROEVO-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | MS3PROEVO-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | MS3PROEVO-C-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | MS3PROEVO-C-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-B75-2 | MS3PROEVO-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-B74-23 | MS3PROEVO-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | MS3PROEVO-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-B74-10 | MS3PROEVO-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | MS3PROEVO-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B74-28 | MS3PROEVO-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B74-27 | MS3PROEVO-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-B74-11 | MS3PROEVO-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-B74-12 | MS3PROEVO-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-B74-13 | MS3PROEVO-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B75-5 | MS3PROEVO-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B75-6 | MS3PROEVO-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B74-1 | MS3PROEVO-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-B74-2 | MS3PROEVO-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-B74-3 | MS3PROEVO-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-B74-4 | MS3PROEVO-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B74-30 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | SP-SHD-1 | MS3PROEVO-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B78-9 | MS3PROEVO-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B74-17 | MS3PROEVO-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-B74-18 | MS3PROEVO-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-B74-19 | MS3PROEVO-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-B74-20 | MS3PROEVO-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-B75-9 | MS3PROEVO-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-B75-15 | MS3PROEVO-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-B75-23 | MS3PROEVO-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-B75-16 | MS3PROEVO-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-B75-24 | MS3PROEVO-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-B75-14 | MS3PROEVO-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-B77-13 | MS3PROEVO-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-B78-10 | MS3PROEVO-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-B75-4 | MS3PROEVO-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-B76-1 | MS3PROEVO-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-B76-2 | MS3PROEVO-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-B76-3 | MS3PROEVO-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-B76-6 | MS3PROEVO-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-B74-15 | MS3PROEVO-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-B74-5 | MS3PROEVO-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-B75-3 | MS3PROEVO-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-B75-7 | MS3PROEVO-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-B77-20 | MS3PROEVO-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-B75-10 | MS3PROEVO-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-B75-12 | MS3PROEVO-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-B75-22 | MS3PROEVO-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-B76-17 | MS3PROEVO-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-B77-25 | MS3PROEVO-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-B76-11 | MS3PROEVO-B-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-B76-5 | MS3PROEVO-B-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-B74-25 | MS3PROEVO-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-B76-10 | MS3PROEVO-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-B76-4 | MS3PROEVO-B-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-B77-18 | MS3PROEVO-B-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-B77-19 | MS3PROEVO-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-B77-27 | MS3PROEVO-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-B78-4 | MS3PROEVO-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-B79-7 | MS3PROEVO-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-B79-8 | MS3PROEVO-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-B75-21 | MS3PROEVO-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-B75-20 | MS3PROEVO-C-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MS3PROEVO-A-13 | MS3PROEVO-A-35 | open (OL) | sensor ground must not touch +12 V supply | |
| 2 | MS3PROEVO-A-13 | MS3PROEVO-A-8 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | MS3PROEVO-A-8 | MS3PROEVO-A-35 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 4 | MS3PROEVO-B-3 | MS3PROEVO-A-35 | open (OL) | power ground must not touch +12 V supply | |
| 5 | MS3PROEVO-B-3 | MS3PROEVO-A-8 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MS3PROEVO-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | High current out 1 | — | W57 | — | 0.5 | OEM-B76-2 | — | — | — |
| 10 | MAT in | — | W67 | — | 0.5 | OEM-B75-22 | — | — | — |
| 11 | CLT in | — | W52 | — | 0.5 | OEM-B75-14 | — | — | — |
| 12 | Analog In 6 | — | W68 | — | 0.5 | OEM-B76-17 | — | — | — |
| 13 | Logic Ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | PWM / Idle Out 1 | — | W43 | — | 0.5 | OEM-B74-17 | — | — | — |
| 15 | CKP− | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Ground Shield Drain | — | W41 | — | 0.5 | SP-SHD-1 | — | — | — |
| 17 | Analog In 7 | — | W81 | — | 0.5 | OEM-B75-21 | — | — | — |
| 18 | Sensor return | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Analog in 1 | — | W47 | — | 0.5 | OEM-B75-9 | — | — | — |
| 2 | High current out 2 | — | W58 | — | 0.5 | OEM-B76-3 | — | — | — |
| 20 | Analog in 2 | — | W49 | — | 0.5 | OEM-B75-23 | — | — | — |
| 21 | Analog in 3 | — | W50 | — | 0.5 | OEM-B75-16 | — | — | — |
| 22 | Analog In 4 | — | W51 | — | 0.5 | OEM-B75-24 | — | — | — |
| 23 | Analog In 5 | — | W65 | — | 0.5 | OEM-B75-10 | — | — | — |
| 24 | Tach out | — | W64 | — | 0.5 | OEM-B77-20 | — | — | — |
| 25 | O2 in | — | W66 | — | 0.5 | OEM-B75-12 | — | — | — |
| 26 | CMP+ | — | W27 | — | 0.5 | OEM-B74-10 | — | — | — |
| 27 | CMP− | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Fuel pump relay out | — | W53 | — | 0.5 | OEM-B77-13 | — | — | — |
| 29 | PWM out 2 | — | W45 | — | 0.5 | OEM-B74-19 | — | — | — |
| 3 | Injector out J | — | W34 | — | 0.5 | OEM-B75-5 | — | — | — |
| 30 | PWM out 3 | — | W54 | — | 0.5 | OEM-B78-10 | — | — | — |
| 31 | Knock in 1 | — | W29 | — | 0.5 | OEM-B74-28 | — | — | — |
| 32 | Digital switched in 1 | — | W76 | — | 0.5 | OEM-B77-19 | — | — | — |
| 33 | CAN L | — | — | — | — | — | — | — | — |
| 34 | CAN H | — | — | — | — | — | — | — | — |
| 35 | 12V+ switched power in | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Injector out I | — | W35 | — | 0.5 | OEM-B75-6 | — | — | — |
| 5 | High current out 3 | — | W59 | — | 0.5 | OEM-B76-6 | — | — | — |
| 6 | CKP+ | — | W25 | — | 0.5 | OEM-B74-23 | — | — | — |
| 7 | Knock In 2 | — | W30 | — | 0.5 | OEM-B74-27 | — | — | — |
| 8 | 5V+ VREF out | — | W24 | — | 0.5 | OEM-B75-2 | — | — | — |
| 9 | TPS in | — | W48 | — | 0.5 | OEM-B75-15 | — | — | — |
MS3PROEVO-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector out A | — | W36 | — | 0.5 | OEM-B74-1 | — | — | — |
| 10 | Injector out F | — | W37 | — | 0.5 | OEM-B74-2 | — | — | — |
| 11 | Injector out G | — | W38 | — | 0.5 | OEM-B74-3 | — | — | — |
| 12 | Injector out H | — | W39 | — | 0.5 | OEM-B74-4 | — | — | — |
| 13 | Spark out G | — | W31 | — | 0.5 | OEM-B74-11 | — | — | — |
| 14 | Spark out E | — | W32 | — | 0.5 | OEM-B74-12 | — | — | — |
| 15 | Spark out C | — | W33 | — | 0.5 | OEM-B74-13 | — | — | — |
| 16 | Spark out H | — | — | — | — | — | — | — | — |
| 17 | Digital frequency in 2 (Hall) | — | W72 | — | 0.5 | OEM-B74-25 | — | — | — |
| 18 | Ground Shield Drain | — | — | — | — | — | — | — | — |
| 19 | Digital switched 12V in | — | W42 | — | 0.5 | OEM-B78-9 | — | — | — |
| 2 | Injector out B | — | W60 | — | 0.5 | OEM-B74-15 | — | — | — |
| 20 | Digital switched in 2 | — | W77 | — | 0.5 | OEM-B77-27 | — | — | — |
| 21 | Digital frequency in 3 (unconditioned) | — | W73 | — | 0.5 | OEM-B76-10 | — | — | — |
| 22 | Digital Frequency in 3 (VR+) | — | W74 | — | 0.5 | OEM-B76-4 | — | — | — |
| 23 | Digital Frequency In 3 (VR−) | — | W75 | — | 0.5 | OEM-B77-18 | — | — | — |
| 24 | Spark out F | — | — | — | — | — | — | — | — |
| 25 | Spark out B | — | — | — | — | — | — | — | — |
| 26 | Spark out D | — | — | — | — | — | — | — | — |
| 27 | Spark out A | — | — | — | — | — | — | — | — |
| 28 | Digital frequency in 1 (unconditioned) | — | W69 | — | 0.5 | OEM-B77-25 | — | — | — |
| 29 | Digital switched in 3 | — | W78 | — | 0.5 | OEM-B78-4 | — | — | — |
| 3 | Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Stepper IAC out 1B | — | — | — | — | — | — | — | — |
| 31 | Stepper IAC out 1A | — | — | — | — | — | — | — | — |
| 32 | Stepper IAC out 2A | — | — | — | — | — | — | — | — |
| 33 | Stepper IAC out 2B | — | — | — | — | — | — | — | — |
| 34 | Digital Frequency in 1 (VR+) | — | W70 | — | 0.5 | OEM-B76-11 | — | — | — |
| 35 | Digital Frequency in 1 (VR−) | — | W71 | — | 0.5 | OEM-B76-5 | — | — | — |
| 4 | Injector out C | — | W61 | — | 0.5 | OEM-B74-5 | — | — | — |
| 5 | Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Injector out D | — | W62 | — | 0.5 | OEM-B75-3 | — | — | — |
| 7 | Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | Injector out E | — | W63 | — | 0.5 | OEM-B75-7 | — | — | — |
| 9 | Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
MS3PROEVO-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | PWM out 5 | — | W56 | — | 0.5 | OEM-B76-1 | — | — | — |
| 10 | Digital switched in 5 | — | W80 | — | 0.5 | OEM-B79-8 | — | — | — |
| 11 | Digital switched in 4 | — | W79 | — | 0.5 | OEM-B79-7 | — | — | — |
| 12 | Digital I/O 5 | — | — | — | — | — | — | — | — |
| 13 | Digital I/O 3 | — | — | — | — | — | — | — | — |
| 14 | Digital I/O 1 | — | — | — | — | — | — | — | — |
| 15 | 5V+ VREF out 2 | — | — | — | — | — | — | — | — |
| 17 | Sensor return | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Sensor return | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor return | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | PWM out 4 | — | W55 | — | 0.5 | OEM-B75-4 | — | — | — |
| 20 | Sensor return | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Sensor return | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | 5V+ VREF out 1 | — | — | — | — | — | — | — | — |
| 3 | Digital out 2 | — | W46 | — | 0.5 | OEM-B74-20 | — | — | — |
| 4 | Digital out 1 | — | W44 | — | 0.5 | OEM-B74-18 | — | — | — |
| 5 | Digital I/O 4 | — | — | — | — | — | — | — | — |
| 6 | Digital I/O 2 | — | — | — | — | — | — | — | — |
| 7 | Analog in 8 | — | W82 | — | 0.5 | OEM-B75-20 | — | — | — |
OEM-B74
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (#30) | — | W36 | — | 0.5 | MS3PROEVO-B-1 | — | — | — |
| 10 | Cam position (G2) | — | W27 | — | 0.5 | MS3PROEVO-A-26 | — | — | — |
| 11 | Ignition 1 (IGT, cyl 1&6) | — | W31 | — | 0.5 | MS3PROEVO-B-13 | — | — | — |
| 12 | Ignition 2 (IGT2, cyl 5&2) | — | W32 | — | 0.5 | MS3PROEVO-B-14 | — | — | — |
| 13 | Ignition 3 (IGT3, cyl 3&4) | — | W33 | — | 0.5 | MS3PROEVO-B-15 | — | — | — |
| 15 | Wastegate VSV (PMC) | — | W60 | — | 0.5 | MS3PROEVO-B-2 | — | — | — |
| 17 | VVT-i OCV - (OCV-) | — | W43 | — | 0.5 | MS3PROEVO-A-14 | — | — | — |
| 18 | VVT-i OCV + (OCV+) | — | W44 | — | 0.5 | MS3PROEVO-C-4 | — | — | — |
| 19 | ETCS-i clutch - (CL-) | — | W45 | — | 0.5 | MS3PROEVO-A-29 | — | — | — |
| 2 | Injector 4 (#40) | — | W37 | — | 0.5 | MS3PROEVO-B-10 | — | — | — |
| 20 | ETCS-i clutch + (CL+) | — | W46 | — | 0.5 | MS3PROEVO-C-3 | — | — | — |
| 21 | Power ground (E01) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank/cam sensor return (NE-) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Crank position (NE+) | — | W25 | — | 0.5 | MS3PROEVO-A-6 | — | — | — |
| 24 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 25 | Igniter verification (IGF) | — | W72 | — | 0.5 | MS3PROEVO-B-17 | — | — | — |
| 27 | Knock sensor 2 (KNK2, rear) | — | W30 | — | 0.5 | MS3PROEVO-A-7 | — | — | — |
| 28 | Knock sensor 1 (KNK1, front) | — | W29 | — | 0.5 | MS3PROEVO-A-31 | — | — | — |
| 3 | Injector 5 (#50) | — | W38 | — | 0.5 | MS3PROEVO-B-11 | — | — | — |
| 30 | ETCS-i motor shield (GEO1) | — | W40 | — | 0.5 | SP-SHD-1 | — | — | — |
| 31 | Power ground (E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Injector 6 (#60) | — | W39 | — | 0.5 | MS3PROEVO-B-12 | — | — | — |
| 5 | Intake air bypass VSV (VSV1) | — | W61 | — | 0.5 | MS3PROEVO-B-4 | — | — | — |
| 7 | ETCS-i motor - (M-) | — | — | — | — | — | — | — | — |
| 8 | ETCS-i motor + (M+) | — | — | — | — | — | — | — | — |
| 9 | ETCS-i ground (ME01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-B75
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Mass air flow (VG) | — | W65 | — | 0.5 | MS3PROEVO-A-23 | — | — | — |
| 12 | O2 sensor (OX) | — | W66 | — | 0.5 | MS3PROEVO-A-25 | — | — | — |
| 14 | Coolant temperature (THW) | — | W52 | — | 0.5 | MS3PROEVO-A-11 | — | — | — |
| 15 | Accelerator pedal 1 (VPA) | — | W48 | — | 0.5 | MS3PROEVO-A-9 | — | — | — |
| 16 | Accelerator pedal 2 (VPA2) | — | W50 | — | 0.5 | MS3PROEVO-A-21 | — | — | — |
| 17 | Power ground (E1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Sensor power (VC) | — | W24 | — | 0.5 | MS3PROEVO-A-8 | — | — | — |
| 20 | A/T 2nd-gear indicator (2) | — | W82 | — | 0.5 | MS3PROEVO-C-7 | — | — | — |
| 21 | A/T 1st-gear indicator (L) | — | W81 | — | 0.5 | MS3PROEVO-A-17 | — | — | — |
| 22 | Intake air temperature (THA) | — | W67 | — | 0.5 | MS3PROEVO-A-10 | — | — | — |
| 23 | Throttle position 1 (VTA) | — | W49 | — | 0.5 | MS3PROEVO-A-20 | — | — | — |
| 24 | Throttle position 2 (VTA2) | — | W51 | — | 0.5 | MS3PROEVO-A-22 | — | — | — |
| 3 | Exhaust gas control VSV (VSV2) | — | W62 | — | 0.5 | MS3PROEVO-B-6 | — | — | — |
| 4 | O2 sensor heater (HT) | — | W55 | — | 0.5 | MS3PROEVO-C-2 | — | — | — |
| 5 | Injector 1 (#10) | — | W34 | — | 0.5 | MS3PROEVO-A-3 | — | — | — |
| 6 | Injector 2 (#20) | — | W35 | — | 0.5 | MS3PROEVO-A-4 | — | — | — |
| 7 | EVAP purge VSV (PRG) | — | W63 | — | 0.5 | MS3PROEVO-B-8 | — | — | — |
| 8 | Main oil pressure switch (MOPS) | — | — | — | — | — | — | — | — |
| 9 | Manifold pressure (PIM) | — | W47 | — | 0.5 | MS3PROEVO-A-19 | — | — | — |
OEM-B76
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/T shift solenoid 1 (S1) | — | W56 | — | 0.5 | MS3PROEVO-C-1 | — | — | — |
| 10 | OD direct-clutch speed (NCO-) | — | W73 | — | 0.5 | MS3PROEVO-B-21 | — | — | — |
| 11 | No.2 speed sensor return (SP2-) | — | W70 | — | 0.5 | MS3PROEVO-B-34 | — | — | — |
| 12 | Exhaust bypass VSV (VSV3) | — | — | — | — | — | — | — | — |
| 13 | A/T lock-up solenoid - (SLU-) | — | — | — | — | — | — | — | — |
| 14 | A/T accumulator solenoid - (SLN-) | — | — | — | — | — | — | — | — |
| 15 | A/T line-pressure solenoid - (SLT-) | — | — | — | — | — | — | — | — |
| 16 | Fuel pressure-up VSV (FPU) | — | — | — | — | — | — | — | — |
| 17 | A/T oil temperature (OIL) | — | W68 | — | 0.5 | MS3PROEVO-A-12 | — | — | — |
| 2 | A/T shift solenoid 2 (S2) | — | W57 | — | 0.5 | MS3PROEVO-A-1 | — | — | — |
| 3 | A/T shift solenoid 3 (S3) | — | W58 | — | 0.5 | MS3PROEVO-A-2 | — | — | — |
| 4 | OD direct-clutch speed (NCO+) | — | W74 | — | 0.5 | MS3PROEVO-B-22 | — | — | — |
| 5 | No.2 speed sensor (SP2+) | — | W71 | — | 0.5 | MS3PROEVO-B-35 | — | — | — |
| 6 | A/T shift solenoid 4 (S4) | — | W59 | — | 0.5 | MS3PROEVO-A-5 | — | — | — |
| 7 | A/T lock-up solenoid + (SLU+) | — | — | — | — | — | — | — | — |
| 8 | A/T accumulator solenoid + (SLN+) | — | — | — | — | — | — | — | — |
| 9 | A/T line-pressure solenoid + (SLT+) | — | — | — | — | — | — | — | — |
OEM-B77
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/C request (AC) | — | — | — | — | — | — | — | — |
| 13 | A/C clutch relay (ACMG) | — | W53 | — | 0.5 | MS3PROEVO-A-28 | — | — | — |
| 14 | A/T shift down (SFTD) | — | — | — | — | — | — | — | — |
| 16 | A/T reverse indicator (R) | — | — | — | — | — | — | — | — |
| 18 | Rear right wheel speed (RRO) | — | W75 | — | 0.5 | MS3PROEVO-B-23 | — | — | — |
| 19 | Rear left wheel speed (RLO) | — | W76 | — | 0.5 | MS3PROEVO-A-32 | — | — | — |
| 2 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 20 | Tachometer output (TACH) | — | W64 | — | 0.5 | MS3PROEVO-A-24 | — | — | — |
| 21 | ABS active (ABS) | — | — | — | — | — | — | — | — |
| 25 | No.1 speed sensor (SPD) | — | W69 | — | 0.5 | MS3PROEVO-B-28 | — | — | — |
| 26 | Electrical load sense (ELS) | — | — | — | — | — | — | — | — |
| 27 | Road speed (RSPD) | — | W77 | — | 0.5 | MS3PROEVO-B-20 | — | — | — |
| 4 | A/T shift up (SFTU) | — | — | — | — | — | — | — | — |
| 5 | Diagnostic/timing check (TC) | — | — | — | — | — | — | — | — |
| 6 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 7 | A/T manual position (3) | — | — | — | — | — | — | — | — |
OEM-B78
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (M-REL) | — | W54 | — | 0.5 | MS3PROEVO-A-30 | — | — | — |
| 11 | Serial diagnostic (SIL) | — | — | — | — | — | — | — | — |
| 16 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | TRAC snow-mode light (SNOW) | — | — | — | — | — | — | — | — |
| 22 | Switch ground (EC) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | TRAC snow-mode switch (SNWI) | — | — | — | — | — | — | — | — |
| 4 | Fuel pump diagnostic (DI) | — | W78 | — | 0.5 | MS3PROEVO-B-29 | — | — | — |
| 5 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 6 | Check-engine light (W) | — | — | — | — | — | — | — | — |
| 7 | ETCS-i power (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | EFI main relay power (+B2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W42 | — | 0.5 | MS3PROEVO-B-19 | — | — | — |
OEM-B79
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | TRAC enable light (IND) | — | — | — | — | — | — | — | — |
| 14 | TRAC active light (CIND) | — | — | — | — | — | — | — | — |
| 17 | A/T meter LCD (LPO3) | — | — | — | — | — | — | — | — |
| 18 | A/T meter LCD (SPTL) | — | — | — | — | — | — | — | — |
| 19 | Reverse buzzer (BZ) | — | — | — | — | — | — | — | — |
| 2 | TRAC off switch (MSW) | — | — | — | — | — | — | — | — |
| 3 | A/T meter LCD (LPO1) | — | — | — | — | — | — | — | — |
| 4 | A/T meter LCD (LPO2) | — | — | — | — | — | — | — | — |
| 7 | Front right wheel speed (FRO) | — | W79 | — | 0.5 | MS3PROEVO-C-11 | — | — | — |
| 8 | Front left wheel speed (FLO) | — | W80 | — | 0.5 | MS3PROEVO-C-10 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-B74-22 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-B75-18 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-B75-19 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-B78-22 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | MS3PROEVO-A-13 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | MS3PROEVO-A-18 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | MS3PROEVO-C-17 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | MS3PROEVO-C-18 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | MS3PROEVO-C-19 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | MS3PROEVO-C-20 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | MS3PROEVO-C-21 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | MS3PROEVO-A-15 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | MS3PROEVO-A-27 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B78-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B78-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-B78-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MS3PROEVO-A-35 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-B74-21 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B74-31 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B74-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-B75-17 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MS3PROEVO-B-3 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MS3PROEVO-B-5 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | MS3PROEVO-B-7 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | MS3PROEVO-B-9 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W40 | — | 0.5 | OEM-B74-30 | — | — | — |
| 1 | — | — | W41 | — | 0.5 | MS3PROEVO-A-16 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-B74-1 | Injector 3 (#30) | injector_out | MS3PROEVO-B-1 | Injector out A | injector_out | single_source | |
| OEM-B74-10 | Cam position (G2) | trigger_in | MS3PROEVO-A-26 | CMP+ | trigger_in | single_source | |
| OEM-B74-11 | Ignition 1 (IGT, cyl 1&6) | ignition_out | MS3PROEVO-B-13 | Spark out G | ignition_out | single_source | |
| OEM-B74-12 | Ignition 2 (IGT2, cyl 5&2) | ignition_out | MS3PROEVO-B-14 | Spark out E | ignition_out | single_source | |
| OEM-B74-13 | Ignition 3 (IGT3, cyl 3&4) | ignition_out | MS3PROEVO-B-15 | Spark out C | ignition_out | single_source | |
| OEM-B74-15 | Wastegate VSV (PMC) | low_side_out | MS3PROEVO-B-2 | Injector out B | injector_out | single_source | |
| OEM-B74-17 | VVT-i OCV - (OCV-) | low_side_out | MS3PROEVO-A-14 | PWM / Idle Out 1 | low_side_out | single_source | |
| OEM-B74-18 | VVT-i OCV + (OCV+) | low_side_out | MS3PROEVO-C-4 | Digital out 1 | low_side_out | single_source | |
| OEM-B74-19 | ETCS-i clutch - (CL-) | low_side_out | MS3PROEVO-A-29 | PWM out 2 | low_side_out | single_source | |
| OEM-B74-2 | Injector 4 (#40) | injector_out | MS3PROEVO-B-10 | Injector out F | injector_out | single_source | |
| OEM-B74-20 | ETCS-i clutch + (CL+) | low_side_out | MS3PROEVO-C-3 | Digital out 2 | low_side_out | single_source | |
| OEM-B74-21 | Power ground (E01) | ground | MS3PROEVO-B-3 + MS3PROEVO-B-5 + MS3PROEVO-B-7 + MS3PROEVO-B-9 | Ground + Ground + Ground + Ground | ground | single_source | |
| OEM-B74-22 | Crank/cam sensor return (NE-) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | sensor_ground + trigger_in | single_source | |
| OEM-B74-23 | Crank position (NE+) | trigger_in | MS3PROEVO-A-6 | CKP+ | trigger_in | single_source | |
| OEM-B74-24 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-B74-25 | Igniter verification (IGF) | digital_in | MS3PROEVO-B-17 | Digital frequency in 2 (Hall) | digital_in | single_source | |
| OEM-B74-27 | Knock sensor 2 (KNK2, rear) | knock_in | MS3PROEVO-A-7 | Knock In 2 | knock_in | single_source | |
| OEM-B74-28 | Knock sensor 1 (KNK1, front) | knock_in | MS3PROEVO-A-31 | Knock in 1 | knock_in | single_source | |
| OEM-B74-3 | Injector 5 (#50) | injector_out | MS3PROEVO-B-11 | Injector out G | injector_out | single_source | |
| OEM-B74-30 | ETCS-i motor shield (GEO1) | shield | MS3PROEVO-A-16 | Ground Shield Drain | shield | single_source | |
| OEM-B74-31 | Power ground (E02) | ground | MS3PROEVO-B-3 + MS3PROEVO-B-5 + MS3PROEVO-B-7 + MS3PROEVO-B-9 | Ground + Ground + Ground + Ground | ground | single_source | |
| OEM-B74-4 | Injector 6 (#60) | injector_out | MS3PROEVO-B-12 | Injector out H | injector_out | single_source | |
| OEM-B74-5 | Intake air bypass VSV (VSV1) | low_side_out | MS3PROEVO-B-4 | Injector out C | injector_out | single_source | |
| OEM-B74-7 | ETCS-i motor - (M-) | hbridge_out | — | — | — | single_source | |
| OEM-B74-8 | ETCS-i motor + (M+) | hbridge_out | — | — | — | single_source | |
| OEM-B74-9 | ETCS-i ground (ME01) | ground | MS3PROEVO-B-3 + MS3PROEVO-B-5 + MS3PROEVO-B-7 + MS3PROEVO-B-9 | Ground + Ground + Ground + Ground | ground | single_source | |
| OEM-B75-10 | Mass air flow (VG) | analog_in | MS3PROEVO-A-23 | Analog In 5 | analog_in | single_source | |
| OEM-B75-12 | O2 sensor (OX) | lambda_nb_in | MS3PROEVO-A-25 | O2 in | lambda_nb_in | single_source | |
| OEM-B75-14 | Coolant temperature (THW) | temp_in | MS3PROEVO-A-11 | CLT in | temp_in | single_source | |
| OEM-B75-15 | Accelerator pedal 1 (VPA) | analog_in | MS3PROEVO-A-9 | TPS in | analog_in | single_source | |
| OEM-B75-16 | Accelerator pedal 2 (VPA2) | analog_in | MS3PROEVO-A-21 | Analog in 3 | analog_in | single_source | |
| OEM-B75-17 | Power ground (E1) | ground | MS3PROEVO-B-3 + MS3PROEVO-B-5 + MS3PROEVO-B-7 + MS3PROEVO-B-9 | Ground + Ground + Ground + Ground | ground | single_source | |
| OEM-B75-18 | Sensor ground (E2) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | sensor_ground + trigger_in | single_source | |
| OEM-B75-19 | MAF ground (EVG) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | sensor_ground + trigger_in | single_source | |
| OEM-B75-2 | Sensor power (VC) | vref | MS3PROEVO-A-8 | 5V+ VREF out | vref | single_source | |
| OEM-B75-20 | A/T 2nd-gear indicator (2) | digital_in | MS3PROEVO-C-7 | Analog in 8 | analog_in | single_source | |
| OEM-B75-21 | A/T 1st-gear indicator (L) | digital_in | MS3PROEVO-A-17 | Analog In 7 | analog_in | single_source | |
| OEM-B75-22 | Intake air temperature (THA) | temp_in | MS3PROEVO-A-10 | MAT in | temp_in | single_source | |
| OEM-B75-23 | Throttle position 1 (VTA) | analog_in | MS3PROEVO-A-20 | Analog in 2 | analog_in | single_source | |
| OEM-B75-24 | Throttle position 2 (VTA2) | analog_in | MS3PROEVO-A-22 | Analog In 4 | analog_in | single_source | |
| OEM-B75-3 | Exhaust gas control VSV (VSV2) | low_side_out | MS3PROEVO-B-6 | Injector out D | injector_out | single_source | |
| OEM-B75-4 | O2 sensor heater (HT) | low_side_out | MS3PROEVO-C-2 | PWM out 4 | low_side_out | single_source | |
| OEM-B75-5 | Injector 1 (#10) | injector_out | MS3PROEVO-A-3 | Injector out J | injector_out | single_source | |
| OEM-B75-6 | Injector 2 (#20) | injector_out | MS3PROEVO-A-4 | Injector out I | injector_out | single_source | |
| OEM-B75-7 | EVAP purge VSV (PRG) | low_side_out | MS3PROEVO-B-8 | Injector out E | injector_out | single_source | |
| OEM-B75-8 | Main oil pressure switch (MOPS) | digital_in | — | — | — | single_source | |
| OEM-B75-9 | Manifold pressure (PIM) | analog_in | MS3PROEVO-A-19 | Analog in 1 | analog_in | single_source | |
| OEM-B76-1 | A/T shift solenoid 1 (S1) | low_side_out | MS3PROEVO-C-1 | PWM out 5 | low_side_out | single_source | |
| OEM-B76-10 | OD direct-clutch speed (NCO-) | digital_in | MS3PROEVO-B-21 | Digital frequency in 3 (unconditioned) | digital_in | single_source | |
| OEM-B76-11 | No.2 speed sensor return (SP2-) | digital_in | MS3PROEVO-B-34 | Digital Frequency in 1 (VR+) | digital_in | single_source | |
| OEM-B76-12 | Exhaust bypass VSV (VSV3) | low_side_out | — | — | — | single_source | |
| OEM-B76-13 | A/T lock-up solenoid - (SLU-) | low_side_out | — | — | — | single_source | |
| OEM-B76-14 | A/T accumulator solenoid - (SLN-) | low_side_out | — | — | — | single_source | |
| OEM-B76-15 | A/T line-pressure solenoid - (SLT-) | low_side_out | — | — | — | single_source | |
| OEM-B76-16 | Fuel pressure-up VSV (FPU) | low_side_out | — | — | — | single_source | |
| OEM-B76-17 | A/T oil temperature (OIL) | temp_in | MS3PROEVO-A-12 | Analog In 6 | analog_in | single_source | |
| OEM-B76-2 | A/T shift solenoid 2 (S2) | low_side_out | MS3PROEVO-A-1 | High current out 1 | low_side_out | single_source | |
| OEM-B76-3 | A/T shift solenoid 3 (S3) | low_side_out | MS3PROEVO-A-2 | High current out 2 | low_side_out | single_source | |
| OEM-B76-4 | OD direct-clutch speed (NCO+) | digital_in | MS3PROEVO-B-22 | Digital Frequency in 3 (VR+) | digital_in | single_source | |
| OEM-B76-5 | No.2 speed sensor (SP2+) | digital_in | MS3PROEVO-B-35 | Digital Frequency in 1 (VR−) | digital_in | single_source | |
| OEM-B76-6 | A/T shift solenoid 4 (S4) | low_side_out | MS3PROEVO-A-5 | High current out 3 | low_side_out | single_source | |
| OEM-B76-7 | A/T lock-up solenoid + (SLU+) | low_side_out | — | — | — | single_source | |
| OEM-B76-8 | A/T accumulator solenoid + (SLN+) | low_side_out | — | — | — | single_source | |
| OEM-B76-9 | A/T line-pressure solenoid + (SLT+) | low_side_out | — | — | — | single_source | |
| OEM-B77-1 | A/C request (AC) | digital_in | — | — | — | single_source | |
| OEM-B77-13 | A/C clutch relay (ACMG) | low_side_out | MS3PROEVO-A-28 | Fuel pump relay out | low_side_out | single_source | |
| OEM-B77-14 | A/T shift down (SFTD) | digital_in | — | — | — | single_source | |
| OEM-B77-16 | A/T reverse indicator (R) | digital_in | — | — | — | single_source | |
| OEM-B77-18 | Rear right wheel speed (RRO) | digital_in | MS3PROEVO-B-23 | Digital Frequency In 3 (VR−) | digital_in | single_source | |
| OEM-B77-19 | Rear left wheel speed (RLO) | digital_in | MS3PROEVO-A-32 | Digital switched in 1 | digital_in | single_source | |
| OEM-B77-2 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-B77-20 | Tachometer output (TACH) | tacho_out | MS3PROEVO-A-24 | Tach out | tacho_out | single_source | |
| OEM-B77-21 | ABS active (ABS) | digital_in | — | — | — | single_source | |
| OEM-B77-25 | No.1 speed sensor (SPD) | digital_in | MS3PROEVO-B-28 | Digital frequency in 1 (unconditioned) | digital_in | single_source | |
| OEM-B77-26 | Electrical load sense (ELS) | digital_in | — | — | — | single_source | |
| OEM-B77-27 | Road speed (RSPD) | digital_in | MS3PROEVO-B-20 | Digital switched in 2 | digital_in | single_source | |
| OEM-B77-4 | A/T shift up (SFTU) | digital_in | — | — | — | single_source | |
| OEM-B77-5 | Diagnostic/timing check (TC) | digital_in | — | — | — | single_source | |
| OEM-B77-6 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-B77-7 | A/T manual position (3) | digital_in | — | — | — | single_source | |
| OEM-B78-1 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-B78-10 | EFI main relay control (M-REL) | low_side_out | MS3PROEVO-A-30 | PWM out 3 | low_side_out | single_source | |
| OEM-B78-11 | Serial diagnostic (SIL) | serial | — | — | — | single_source | |
| OEM-B78-16 | EFI main relay power (+B) | power_in | MS3PROEVO-A-35 | 12V+ switched power in | power_in | single_source | |
| OEM-B78-2 | TRAC snow-mode light (SNOW) | low_side_out | — | — | — | single_source | |
| OEM-B78-22 | Switch ground (EC) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | sensor_ground + trigger_in | single_source | |
| OEM-B78-3 | TRAC snow-mode switch (SNWI) | digital_in | — | — | — | single_source | |
| OEM-B78-4 | Fuel pump diagnostic (DI) | digital_in | MS3PROEVO-B-29 | Digital switched in 3 | digital_in | single_source | |
| OEM-B78-5 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-B78-6 | Check-engine light (W) | low_side_out | — | — | — | single_source | |
| OEM-B78-7 | ETCS-i power (+BM) | power_in | MS3PROEVO-A-35 | 12V+ switched power in | power_in | single_source | |
| OEM-B78-8 | EFI main relay power (+B2) | power_in | MS3PROEVO-A-35 | 12V+ switched power in | power_in | single_source | |
| OEM-B78-9 | Ignition switch (IGSW) | digital_in | MS3PROEVO-B-19 | Digital switched 12V in | digital_in | single_source | |
| OEM-B79-1 | TRAC enable light (IND) | low_side_out | — | — | — | single_source | |
| OEM-B79-14 | TRAC active light (CIND) | low_side_out | — | — | — | single_source | |
| OEM-B79-17 | A/T meter LCD (LPO3) | low_side_out | — | — | — | single_source | |
| OEM-B79-18 | A/T meter LCD (SPTL) | low_side_out | — | — | — | single_source | |
| OEM-B79-19 | Reverse buzzer (BZ) | low_side_out | — | — | — | single_source | |
| OEM-B79-2 | TRAC off switch (MSW) | digital_in | — | — | — | single_source | |
| OEM-B79-3 | A/T meter LCD (LPO1) | low_side_out | — | — | — | single_source | |
| OEM-B79-4 | A/T meter LCD (LPO2) | low_side_out | — | — | — | single_source | |
| OEM-B79-7 | Front right wheel speed (FRO) | digital_in | MS3PROEVO-C-11 | Digital switched in 4 | digital_in | single_source | |
| OEM-B79-8 | Front left wheel speed (FLO) | digital_in | MS3PROEVO-C-10 | Digital switched in 5 | digital_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | no route | ETCS-i power (+BM) | — | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B2) | — | |
| W4 | SP-14V-1 | MS3PROEVO-A-35 | 0.85 | no route | 12V+ switched power in | — | |
| W5 | OEM-B74-21 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W6 | OEM-B74-31 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W7 | OEM-B74-9 | SP-GND-1 | 0.85 | no route | ETCS-i ground (ME01) | — | |
| W8 | OEM-B75-17 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W9 | SP-GND-1 | MS3PROEVO-B-3 | 0.85 | no route | Ground | — | |
| W10 | SP-GND-1 | MS3PROEVO-B-5 | 0.85 | no route | Ground | — | |
| W11 | SP-GND-1 | MS3PROEVO-B-7 | 0.85 | no route | Ground | — | |
| W12 | SP-GND-1 | MS3PROEVO-B-9 | 0.85 | no route | Ground | — | |
| W13 | OEM-B74-22 | SP-0V-1 | 0.5 | no route | Crank/cam sensor return (NE-) | — | |
| W14 | OEM-B75-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W15 | OEM-B75-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W16 | OEM-B78-22 | SP-0V-1 | 0.5 | no route | Switch ground (EC) | — | |
| W17 | SP-0V-1 | MS3PROEVO-A-13 | 0.5 | no route | Logic Ground | — | |
| W18 | SP-0V-1 | MS3PROEVO-A-18 | 0.5 | no route | Sensor return | — | |
| W19 | SP-0V-1 | MS3PROEVO-C-17 | 0.5 | no route | Sensor return | — | |
| W20 | SP-0V-1 | MS3PROEVO-C-18 | 0.5 | no route | Sensor return | — | |
| W21 | SP-0V-1 | MS3PROEVO-C-19 | 0.5 | no route | Sensor return | — | |
| W22 | SP-0V-1 | MS3PROEVO-C-20 | 0.5 | no route | Sensor return | — | |
| W23 | SP-0V-1 | MS3PROEVO-C-21 | 0.5 | no route | Sensor return | — | |
| W24 | OEM-B75-2 | MS3PROEVO-A-8 | 0.5 | no route | Sensor power (VC) | — | |
| W25 | OEM-B74-23 | MS3PROEVO-A-6 | 0.5 | no route | Crank position (NE+) | — | |
| W26 | SP-0V-1 | MS3PROEVO-A-15 | 0.5 | no route | CKP− | — | |
| W27 | OEM-B74-10 | MS3PROEVO-A-26 | 0.5 | no route | Cam position (G2) | — | |
| W28 | SP-0V-1 | MS3PROEVO-A-27 | 0.5 | no route | CMP− | — | |
| W29 | OEM-B74-28 | MS3PROEVO-A-31 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W30 | OEM-B74-27 | MS3PROEVO-A-7 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W31 | OEM-B74-11 | MS3PROEVO-B-13 | 0.5 | no route | Ignition 1 (IGT, cyl 1&6) | — | |
| W32 | OEM-B74-12 | MS3PROEVO-B-14 | 0.5 | no route | Ignition 2 (IGT2, cyl 5&2) | — | |
| W33 | OEM-B74-13 | MS3PROEVO-B-15 | 0.5 | no route | Ignition 3 (IGT3, cyl 3&4) | — | |
| W34 | OEM-B75-5 | MS3PROEVO-A-3 | 0.5 | no route | Injector 1 (#10) | — | |
| W35 | OEM-B75-6 | MS3PROEVO-A-4 | 0.5 | no route | Injector 2 (#20) | — | |
| W36 | OEM-B74-1 | MS3PROEVO-B-1 | 0.5 | no route | Injector 3 (#30) | — | |
| W37 | OEM-B74-2 | MS3PROEVO-B-10 | 0.5 | no route | Injector 4 (#40) | — | |
| W38 | OEM-B74-3 | MS3PROEVO-B-11 | 0.5 | no route | Injector 5 (#50) | — | |
| W39 | OEM-B74-4 | MS3PROEVO-B-12 | 0.5 | no route | Injector 6 (#60) | — | |
| W40 | OEM-B74-30 | SP-SHD-1 | 0.5 | no route | ETCS-i motor shield (GEO1) | — | |
| W41 | SP-SHD-1 | MS3PROEVO-A-16 | 0.5 | no route | Ground Shield Drain | — | |
| W42 | OEM-B78-9 | MS3PROEVO-B-19 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W43 | OEM-B74-17 | MS3PROEVO-A-14 | 0.5 | no route | VVT-i OCV - (OCV-) | — | |
| W44 | OEM-B74-18 | MS3PROEVO-C-4 | 0.5 | no route | VVT-i OCV + (OCV+) | — | |
| W45 | OEM-B74-19 | MS3PROEVO-A-29 | 0.5 | no route | ETCS-i clutch - (CL-) | — | |
| W46 | OEM-B74-20 | MS3PROEVO-C-3 | 0.5 | no route | ETCS-i clutch + (CL+) | — | |
| W47 | OEM-B75-9 | MS3PROEVO-A-19 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W48 | OEM-B75-15 | MS3PROEVO-A-9 | 0.5 | no route | Accelerator pedal 1 (VPA) | — | |
| W49 | OEM-B75-23 | MS3PROEVO-A-20 | 0.5 | no route | Throttle position 1 (VTA) | — | |
| W50 | OEM-B75-16 | MS3PROEVO-A-21 | 0.5 | no route | Accelerator pedal 2 (VPA2) | — | |
| W51 | OEM-B75-24 | MS3PROEVO-A-22 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W52 | OEM-B75-14 | MS3PROEVO-A-11 | 0.5 | no route | Coolant temperature (THW) | — | |
| W53 | OEM-B77-13 | MS3PROEVO-A-28 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W54 | OEM-B78-10 | MS3PROEVO-A-30 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W55 | OEM-B75-4 | MS3PROEVO-C-2 | 0.5 | no route | O2 sensor heater (HT) | — | |
| W56 | OEM-B76-1 | MS3PROEVO-C-1 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W57 | OEM-B76-2 | MS3PROEVO-A-1 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W58 | OEM-B76-3 | MS3PROEVO-A-2 | 0.5 | no route | A/T shift solenoid 3 (S3) | — | |
| W59 | OEM-B76-6 | MS3PROEVO-A-5 | 0.5 | no route | A/T shift solenoid 4 (S4) | — | |
| W60 | OEM-B74-15 | MS3PROEVO-B-2 | 0.5 | no route | Wastegate VSV (PMC) | — | |
| W61 | OEM-B74-5 | MS3PROEVO-B-4 | 0.5 | no route | Intake air bypass VSV (VSV1) | — | |
| W62 | OEM-B75-3 | MS3PROEVO-B-6 | 0.5 | no route | Exhaust gas control VSV (VSV2) | — | |
| W63 | OEM-B75-7 | MS3PROEVO-B-8 | 0.5 | no route | EVAP purge VSV (PRG) | — | |
| W64 | OEM-B77-20 | MS3PROEVO-A-24 | 0.5 | no route | Tachometer output (TACH) | — | |
| W65 | OEM-B75-10 | MS3PROEVO-A-23 | 0.5 | no route | Mass air flow (VG) | — | |
| W66 | OEM-B75-12 | MS3PROEVO-A-25 | 0.5 | no route | O2 sensor (OX) | — | |
| W67 | OEM-B75-22 | MS3PROEVO-A-10 | 0.5 | no route | Intake air temperature (THA) | — | |
| W68 | OEM-B76-17 | MS3PROEVO-A-12 | 0.5 | no route | A/T oil temperature (OIL) | — | |
| W69 | OEM-B77-25 | MS3PROEVO-B-28 | 0.5 | no route | No.1 speed sensor (SPD) | — | |
| W70 | OEM-B76-11 | MS3PROEVO-B-34 | 0.5 | no route | No.2 speed sensor return (SP2-) | — | |
| W71 | OEM-B76-5 | MS3PROEVO-B-35 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W72 | OEM-B74-25 | MS3PROEVO-B-17 | 0.5 | no route | Igniter verification (IGF) | — | |
| W73 | OEM-B76-10 | MS3PROEVO-B-21 | 0.5 | no route | OD direct-clutch speed (NCO-) | — | |
| W74 | OEM-B76-4 | MS3PROEVO-B-22 | 0.5 | no route | OD direct-clutch speed (NCO+) | — | |
| W75 | OEM-B77-18 | MS3PROEVO-B-23 | 0.5 | no route | Rear right wheel speed (RRO) | — | |
| W76 | OEM-B77-19 | MS3PROEVO-A-32 | 0.5 | no route | Rear left wheel speed (RLO) | — | |
| W77 | OEM-B77-27 | MS3PROEVO-B-20 | 0.5 | no route | Road speed (RSPD) | — | |
| W78 | OEM-B78-4 | MS3PROEVO-B-29 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W79 | OEM-B79-7 | MS3PROEVO-C-11 | 0.5 | no route | Front right wheel speed (FRO) | — | |
| W80 | OEM-B79-8 | MS3PROEVO-C-10 | 0.5 | no route | Front left wheel speed (FLO) | — | |
| W81 | OEM-B75-21 | MS3PROEVO-A-17 | 0.5 | no route | A/T 1st-gear indicator (L) | — | |
| W82 | OEM-B75-20 | MS3PROEVO-C-7 | 0.5 | no route | A/T 2nd-gear indicator (2) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (12)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | MS3Pro EVO+ | The 2JZ-GTE injectors (2JZ-GTE fuel injector) are low-impedance, but MS3Pro EVO+ drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| error | REQUIRED_UNMAPPED | OEM-B74-7 | Required OEM function "ETCS-i motor - (M-)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B74-8 | Required OEM function "ETCS-i motor + (M+)" (hbridge_out) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-B75-20 ↔ MS3PROEVO-C-7 | OEM-B75-20 "A/T 2nd-gear indicator (2)" [digital_in] is wired to MS3PROEVO-C-7 "Analog in 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B75-21 ↔ MS3PROEVO-A-17 | OEM-B75-21 "A/T 1st-gear indicator (L)" [digital_in] is wired to MS3PROEVO-A-17 "Analog In 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-B74-15 ↔ MS3PROEVO-B-2 | OEM-B74-15 "Wastegate VSV (PMC)" [low_side_out] is wired to MS3PROEVO-B-2 "Injector out B" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B74-5 ↔ MS3PROEVO-B-4 | OEM-B74-5 "Intake air bypass VSV (VSV1)" [low_side_out] is wired to MS3PROEVO-B-4 "Injector out C" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B75-3 ↔ MS3PROEVO-B-6 | OEM-B75-3 "Exhaust gas control VSV (VSV2)" [low_side_out] is wired to MS3PROEVO-B-6 "Injector out D" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B75-7 ↔ MS3PROEVO-B-8 | OEM-B75-7 "EVAP purge VSV (PRG)" [low_side_out] is wired to MS3PROEVO-B-8 "Injector out E" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-17 ↔ MS3PROEVO-A-12 | OEM-B76-17 "A/T oil temperature (OIL)" [temp_in] is wired to MS3PROEVO-A-12 "Analog In 6" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-B78-22 ↔ MS3PROEVO-A-15 | OEM-B78-22 "Switch ground (EC)" [sensor_ground] is wired to MS3PROEVO-A-15 "CKP−" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 33 optional OEM pins are not mapped: OEM-B74-24 Neutral/park switch (NSW); OEM-B75-8 Main oil pressure switch (MOPS); OEM-B76-12 Exhaust bypass VSV (VSV3); OEM-B76-13 A/T lock-up solenoid - (SLU-); OEM-B76-14 A/T accumulator solenoid - (SLN-); OEM-B76-15 A/T line-pressure solenoid - (SLT-); OEM-B76-16 Fuel pressure-up VSV (FPU); OEM-B76-7 A/T lock-up solenoid + (SLU+); OEM-B76-8 A/T accumulator solenoid + (SLN+); OEM-B76-9 A/T line-pressure solenoid + (SLT+); OEM-B77-1 A/C request (AC); OEM-B77-14 A/T shift down (SFTD); OEM-B77-16 A/T reverse indicator (R); OEM-B77-2 Starter signal (STA); OEM-B77-21 ABS active (ABS); OEM-B77-26 Electrical load sense (ELS); OEM-B77-4 A/T shift up (SFTU); OEM-B77-5 Diagnostic/timing check (TC); OEM-B77-6 Stop light switch (STP); OEM-B77-7 A/T manual position (3); OEM-B78-11 Serial diagnostic (SIL); OEM-B78-2 TRAC snow-mode light (SNOW); OEM-B78-3 TRAC snow-mode switch (SNWI); OEM-B78-5 Fuel pump control (FPC); OEM-B78-6 Check-engine light (W); OEM-B79-1 TRAC enable light (IND); OEM-B79-14 TRAC active light (CIND); OEM-B79-17 A/T meter LCD (LPO3); OEM-B79-18 A/T meter LCD (SPTL); OEM-B79-19 Reverse buzzer (BZ); OEM-B79-2 TRAC off switch (MSW); OEM-B79-3 A/T meter LCD (LPO1); OEM-B79-4 A/T meter LCD (LPO2) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-B78-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-B74 7: ETCS-i motor - (M-): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-B74 8: ETCS-i motor + (M+): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-B78 1: Battery constant (BATT): AMP EFI MS3Pro EVO+ has no battery-constant input; not needed - OEM-B76 12: Exhaust bypass VSV (VSV3): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 13: A/T lock-up solenoid - (SLU-): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 14: A/T accumulator solenoid - (SLN-): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 15: A/T line-pressure solenoid - (SLT-): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 16: Fuel pressure-up VSV (FPU): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 7: A/T lock-up solenoid + (SLU+): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 8: A/T accumulator solenoid + (SLN+): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B76 9: A/T line-pressure solenoid + (SLT+): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B78 2: TRAC snow-mode light (SNOW): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B78 5: Fuel pump control (FPC): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B78 6: Check-engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 1: TRAC enable light (IND): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 14: TRAC active light (CIND): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 17: A/T meter LCD (LPO3): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 18: A/T meter LCD (SPTL): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 19: Reverse buzzer (BZ): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 3: A/T meter LCD (LPO1): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B79 4: A/T meter LCD (LPO2): no free low_side/relay_control/heater_low_side/ls_hs/injector on AMP EFI MS3Pro EVO+ - OEM-B74 24: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B75 8: Main oil pressure switch (MOPS): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 1: A/C request (AC): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 14: A/T shift down (SFTD): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 16: A/T reverse indicator (R): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 2: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 21: ABS active (ABS): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 26: Electrical load sense (ELS): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 4: A/T shift up (SFTU): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 5: Diagnostic/timing check (TC): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 6: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B77 7: A/T manual position (3): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B78 3: TRAC snow-mode switch (SNWI): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B79 2: TRAC off switch (MSW): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro EVO+ - OEM-B78 11: Serial diagnostic (SIL): no free k_line on AMP EFI MS3Pro EVO+
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AMP EFI: MS3Pro EVO+ / EVO+ HC manual (fw 1.6.1) pinout tables | https://cdn.shopify.com/s/files/1/0960/0014/7754/files/MS3Pro_User_Manual_Firmware_1.6.1_EVO.pdf?v=1760643022 | archive | 2026-10-05 | d5dd8a31822d |
| 3 | community_copy | wilbo666: 2JZ-GTE VVTi JZA80 Supra Engine Wiring (ECU pinout, B74-B79) | http://wilbo666.pbworks.com/w/page/57949268/2JZ-GTE%20VVTi%20JZA80%20Supra%20Engine%20Wiring | — | — | — |