Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Install modifications
Steps on the car itself, outside the harness. Every harness for this car inherits them.
- Re-route the pressure-sensor vacuum hose to the intake manifoldrequired
Re-route the pressure sensor's (Mazda "EGR boost sensor", pin 4AE) vacuum hose directly to the intake manifold, bypassing the EGR boost solenoid. The stock ECU multiplexes baro + MAP through that solenoid: with it off the sensor reads atmosphere, with it energized it reads manifold. After re-routing the sensor reads MAP only, so the standalone needs its own barometric source — its onboard baro sensor if fitted, or a separate baro sensor on a spare analog input. (Alternative, not recommended: keep the hose stock and have the ECU energize the solenoid permanently via a low-side output switched with ignition; this costs an output.)
Why: With the solenoid off (its default) the sensor reads atmospheric pressure, not manifold pressure, so a standalone that uses this sensor as its MAP input would read the wrong value.
Where: EGR boost solenoid and the pressure sensor's vacuum hose (sensor signal 4AE).
Source: Justin Barrera — Miata NA/NB wiring corrections
Components
| Ref | Kind | Part | Exclude from BOM |
|---|---|---|---|
| MS3PROMINI-A | connector | ||
| OEM-2 | connector | ||
| OEM-3 | connector | ||
| OEM-4 | connector | ||
| SP-0V | splice | ||
| SP-14V | splice | ||
| SP-GND | splice |
Create part
Cut list
Lengths need a layout (0 of 36 routed).
| Wire | From / To | Gauge | Signal |
|---|---|---|---|
| W1 | OEM-2-P / SP-14V-1 | 0.85 | ISC valve +14V feed |
| W2 | OEM-4-AF / SP-14V-1 | 0.85 | ECU power +14V (main relay) |
| W3 | OEM-4-D / SP-14V-1 | 0.85 | VVT oil-control solenoid +12V feed |
| W4 | SP-14V-1 / MS3PROMINI-A-1 | 0.85 | 12V+ switched power in |
| W5 | OEM-3-A / SP-GND-1 | 0.85 | Power ground |
| W6 | OEM-3-B / SP-GND-1 | 0.85 | Power ground |
| W7 | OEM-4-A / SP-GND-1 | 0.85 | Power ground |
| W8 | SP-GND-1 / MS3PROMINI-A-22 | 0.85 | Power ground |
| W9 | SP-GND-1 / MS3PROMINI-A-23 | 0.85 | Power ground |
| W10 | OEM-4-O / SP-0V-1 | 0.5 | Signal ground |
| W11 | SP-0V-1 / MS3PROMINI-A-21 | 0.5 | Sensor ground |
| W12 | OEM-4-L / MS3PROMINI-A-2 | 0.5 | +5V sensor supply |
| W13 | OEM-3-Y / MS3PROMINI-A-30 | 0.5 | Crank position (CKP) |
| W14 | OEM-3-V / MS3PROMINI-A-32 | 0.5 | Cam position (CMP) |
| W15 | OEM-3-F / MS3PROMINI-A-17 | 0.5 | Ignition 1 (coils 1+4, wasted spark) |
| W16 | OEM-3-I / MS3PROMINI-A-18 | 0.5 | Ignition 2 (coils 2+3, wasted spark) |
| W17 | OEM-2-A / MS3PROMINI-A-10 | 0.5 | Injector 1 |
| W18 | OEM-2-D / MS3PROMINI-A-11 | 0.5 | Injector 2 |
| W19 | OEM-2-G / MS3PROMINI-A-12 | 0.5 | Injector 3 |
| W20 | OEM-2-J / MS3PROMINI-A-5 | 0.5 | Injector 4 |
| W21 | OEM-2-B / MS3PROMINI-A-4 | 0.5 | Cooling fan relay |
| W22 | OEM-2-C / MS3PROMINI-A-3 | 0.5 | Condenser fan relay |
| W23 | OEM-2-K / MS3PROMINI-A-6 | 0.5 | A/C clutch relay |
| W24 | OEM-2-M / MS3PROMINI-A-7 | 0.5 | Fuel pump relay |
| W25 | OEM-3-H / MS3PROMINI-A-8 | 0.5 | Main relay |
| W26 | OEM-2-Q / MS3PROMINI-A-9 | 0.5 | ISC valve low side |
| W27 | OEM-4-X / MS3PROMINI-A-13 | 0.5 | Mass air flow (MAF) |
| W28 | OEM-4-AE / MS3PROMINI-A-14 | 0.5 | Pressure sensor (Mazda: EGR boost sensor) |
| W29 | OEM-4-V / MS3PROMINI-A-28 | 0.5 | Throttle position (TPS) |
| W30 | OEM-4-AA / MS3PROMINI-A-15 | 0.5 | Rear O2 signal |
| W31 | OEM-4-W / MS3PROMINI-A-16 | 0.5 | Front O2 signal |
| W32 | OEM-4-P / MS3PROMINI-A-26 | 0.5 | Coolant temperature (ECT) |
| W33 | OEM-4-N / MS3PROMINI-A-27 | 0.5 | Intake air temperature (IAT) |
| W34 | OEM-3-T / MS3PROMINI-A-34 | 0.5 | Vehicle speed |
| W35 | OEM-3-S / MS3PROMINI-A-29 | 0.5 | Immobiliser |
| W36 | OEM-4-B / MS3PROMINI-A-35 | 0.5 | Brake switch |
Bill of materials
No parts in this harness.