Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Install modifications
Steps on the car itself, outside the harness. Every harness for this car inherits them.
- Re-route the pressure-sensor vacuum hose to the intake manifoldrequired
Re-route the pressure sensor's (Mazda "EGR boost sensor", pin 4AE) vacuum hose directly to the intake manifold, bypassing the EGR boost solenoid. The stock ECU multiplexes baro + MAP through that solenoid: with it off the sensor reads atmosphere, with it energized it reads manifold. After re-routing the sensor reads MAP only, so the standalone needs its own barometric source — its onboard baro sensor if fitted, or a separate baro sensor on a spare analog input. (Alternative, not recommended: keep the hose stock and have the ECU energize the solenoid permanently via a low-side output switched with ignition; this costs an output.)
Why: With the solenoid off (its default) the sensor reads atmospheric pressure, not manifold pressure, so a standalone that uses this sensor as its MAP input would read the wrong value.
Where: EGR boost solenoid and the pressure sensor's vacuum hose (sensor signal 4AE).
Source: Justin Barrera — Miata NA/NB wiring corrections
Components
| Ref | Kind | Part | Exclude from BOM |
|---|---|---|---|
| ELITE2500-A | connector | ||
| ELITE2500-B | connector | ||
| OEM-2 | connector | ||
| OEM-3 | connector | ||
| OEM-4 | connector | ||
| SP-0V | splice | ||
| SP-14V | splice | ||
| SP-GND | splice |
Create part
Cut list
Lengths need a layout (0 of 56 routed).
| Wire | From / To | Gauge | Signal |
|---|---|---|---|
| W1 | OEM-2-P / SP-14V-1 | 0.85 | ISC valve +14V feed |
| W2 | OEM-4-AF / SP-14V-1 | 0.85 | ECU power +14V (main relay) |
| W3 | OEM-4-D / SP-14V-1 | 0.85 | VVT oil-control solenoid +12V feed |
| W4 | SP-14V-1 / ELITE2500-A-26 | 0.85 | ECU injector power input |
| W5 | SP-14V-1 / ELITE2500-B-11 | 0.85 | +13.8V ECU supply |
| W6 | OEM-3-A / SP-GND-1 | 0.85 | Power ground |
| W7 | OEM-3-B / SP-GND-1 | 0.85 | Power ground |
| W8 | OEM-4-A / SP-GND-1 | 0.85 | Power ground |
| W9 | SP-GND-1 / ELITE2500-A-10 | 0.85 | Battery ground |
| W10 | SP-GND-1 / ELITE2500-A-11 | 0.85 | Battery ground |
| W11 | OEM-4-O / SP-0V-1 | 0.5 | Signal ground |
| W12 | SP-0V-1 / ELITE2500-B-14 | 0.5 | Signal ground |
| W13 | SP-0V-1 / ELITE2500-B-15 | 0.5 | Signal ground |
| W14 | SP-0V-1 / ELITE2500-B-16 | 0.5 | Signal ground |
| W15 | OEM-4-L / ELITE2500-A-9 | 0.5 | +5V sensor supply |
| W16 | OEM-3-Y / ELITE2500-B-1 | 0.5 | Crank position (CKP) |
| W17 | SP-0V-1 / ELITE2500-B-5 | 0.5 | Crank (Trigger) (−) |
| W18 | OEM-3-V / ELITE2500-B-2 | 0.5 | Cam position (CMP) |
| W19 | SP-0V-1 / ELITE2500-B-6 | 0.5 | Cam (Home) (−) |
| W20 | OEM-4-M / ELITE2500-B-21 | 0.5 | Knock sensor |
| W21 | OEM-3-F / ELITE2500-A-3 | 0.5 | Ignition 1 (coils 1+4, wasted spark) |
| W22 | OEM-3-I / ELITE2500-A-4 | 0.5 | Ignition 2 (coils 2+3, wasted spark) |
| W23 | OEM-2-A / ELITE2500-A-19 | 0.5 | Injector 1 |
| W24 | OEM-2-D / ELITE2500-A-20 | 0.5 | Injector 2 |
| W25 | OEM-2-G / ELITE2500-A-21 | 0.5 | Injector 3 |
| W26 | OEM-2-J / ELITE2500-A-22 | 0.5 | Injector 4 |
| W27 | OEM-2-B / ELITE2500-A-25 | 0.5 | Cooling fan relay |
| W28 | OEM-2-C / ELITE2500-A-18 | 0.5 | Condenser fan relay |
| W29 | OEM-2-K / ELITE2500-A-1 | 0.5 | A/C clutch relay |
| W30 | OEM-2-M / ELITE2500-A-24 | 0.5 | Fuel pump relay |
| W31 | OEM-3-H / ELITE2500-A-23 | 0.5 | Main relay |
| W32 | OEM-3-J / ELITE2500-B-19 | 0.5 | Front O2 heater |
| W33 | OEM-3-P / ELITE2500-A-31 | 0.5 | Rear O2 heater |
| W34 | OEM-2-Q / ELITE2500-A-32 | 0.5 | ISC valve low side |
| W35 | OEM-2-E / ELITE2500-A-33 | 0.5 | EGR valve |
| W36 | OEM-2-F / ELITE2500-A-34 | 0.5 | EGR valve |
| W37 | OEM-2-H / ELITE2500-A-27 | 0.5 | EGR valve |
| W38 | OEM-2-I / ELITE2500-A-28 | 0.5 | EGR valve |
| W39 | OEM-2-N / ELITE2500-A-29 | 0.5 | VTCS solenoid (intake butterflies) |
| W40 | OEM-2-R / ELITE2500-A-30 | 0.5 | Malfunction indicator lamp (MIL) |
| W41 | OEM-3-E / ELITE2500-B-25 | 0.5 | Charcoal canister purge |
| W42 | OEM-3-M / ELITE2500-B-26 | 0.5 | Alternator control |
| W43 | OEM-4-X / ELITE2500-B-13 | 0.5 | Mass air flow (MAF) |
| W44 | OEM-4-AE / ELITE2500-A-16 | 0.5 | Pressure sensor (Mazda: EGR boost sensor) |
| W45 | OEM-4-V / ELITE2500-A-17 | 0.5 | Throttle position (TPS) |
| W46 | OEM-4-AA / ELITE2500-A-2 | 0.5 | Rear O2 signal |
| W47 | OEM-4-W / ELITE2500-B-20 | 0.5 | Front O2 signal |
| W48 | OEM-4-P / ELITE2500-B-4 | 0.5 | Coolant temperature (ECT) |
| W49 | OEM-4-N / ELITE2500-B-12 | 0.5 | Intake air temperature (IAT) |
| W50 | OEM-4-AD / ELITE2500-B-3 | 0.5 | Fuel level |
| W51 | OEM-3-T / ELITE2500-B-8 | 0.5 | Vehicle speed |
| W52 | OEM-3-S / ELITE2500-B-9 | 0.5 | Immobiliser |
| W53 | OEM-4-B / ELITE2500-B-10 | 0.5 | Brake switch |
| W54 | OEM-4-C / ELITE2500-B-7 | 0.5 | Power steering pressure switch |
| W55 | OEM-4-F / ELITE2500-A-15 | 0.5 | A/C request |
| W56 | OEM-4-H / ELITE2500-A-14 | 0.5 | Neutral switch |
Bill of materials
No parts in this harness.