Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
EMUBLACK-Black
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Ignition | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-A34-28Knock sensor 1 (KNK1) | ||
| Analog in | single_source· Vendor | OEM-A34-20Manifold absolute pressure (PIM) | ||
| Temp in | single_source· Vendor | OEM-A33-12Intake air temperature (THA, in MAF) | ||
| Wideband Vs | single_source· Vendor | not connected | ||
| Crank / cam | single_source· Vendor | OEM-A34-26VVT cam sensor intake bank 1 (VV1+) | ||
| Crank / cam | single_source· Vendor | OEM-A34-16Crank position (NE+) | ||
| Analog in | single_source· Vendor | OEM-A36-20Oil temperature (OT) | ||
| Digital in | single_source· Vendor | OEM-A33-14Starter signal (STSW2) | ||
| No data | single_source· Vendor | not connected | ||
| CAN high | single_source· Vendor | OEM-A33-19CAN high (CANH) | ||
| Power in | single_source· Vendor | SP-14V-1 | ||
| Ignition | single_source· Vendor | OEM-A36-8Ignition coil 4 (IGT4) | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-A34-17Knock sensor 2 (KNK2) | ||
| Analog in | single_source· Vendor | OEM-A36-28Throttle position 2 (VTA2) | ||
| Analog in | single_source· Vendor | OEM-A35-31Accelerator pedal position 2 (VPA2) | ||
| Wideband Ip | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-A34-25VVT cam sensor exhaust bank 2 (EV2+) | ||
| Crank / cam | single_source· Vendor | OEM-A34-14VVT cam sensor exhaust bank 1 (EV1+) | ||
| Wideband cal | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-A33-15Clutch switch (CLSW) | ||
| No data | single_source· Vendor | not connected | ||
| CAN low | single_source· Vendor | OEM-A33-18CAN low (CANL) | ||
| 5V / 8V ref | single_source· Vendor | SP-5V1-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Analog in | single_source· Vendor | OEM-A35-23Accelerator pedal position (VPA) | ||
| Analog in | single_source· Vendor | OEM-A33-22Mass air flow (VG) | ||
| Temp in | single_source· Vendor | OEM-A36-30Engine coolant temperature (THW) | ||
| Wideband Vgnd | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | OEM-A36-18Throttle position (VTA1) | ||
| Digital in | single_source· Vendor | OEM-A33-16Neutral switch (NSW) | ||
| Analog in | single_source· Vendor | OEM-A34-21Heated oxygen sensor (OX1B, rear) | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with