Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
EMUBLACK-Black
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Ignition | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-E7-28Knock sensor 1 (KNK1) | ||
| Analog in | single_source· Vendor | OEM-E6-16Accelerator pedal 2 (VPA2) | ||
| Temp in | single_source· Vendor | OEM-E6-14Coolant temperature (THW) | ||
| Wideband Vs | single_source· Vendor | not connected | ||
| Crank / cam | single_source· Vendor | not connected | ||
| Crank / cam | single_source· Vendor | OEM-E7-23Crank position (NE) | ||
| Analog in | single_source· Vendor | OEM-E6-11O2 right front (OXR1) | ||
| Digital in | single_source· Vendor | OEM-E5-5Vehicle speed sensor (SP2+) | ||
| No data | single_source· Vendor | not connected | ||
| CAN high | single_source· Vendor | not connected | ||
| Power in | single_source· Vendor | SP-14V-1 | ||
| Ignition | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-E7-27Knock sensor 2 (KNK2) | ||
| Analog in | single_source· Vendor | OEM-E6-24Throttle position 2 (VTA2) | ||
| Analog in | single_source· Vendor | OEM-E6-15Accelerator pedal 1 (VPA) | ||
| Wideband Ip | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E5-11Vehicle speed sensor (SP2-) | ||
| Crank / cam | single_source· Vendor | OEM-E7-10Cam position (G2) | ||
| Wideband cal | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E7-25Igniter feedback (IGF) | ||
| No data | single_source· Vendor | not connected | ||
| CAN low | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | OEM-E6-2Sensor supply +5V (VC) | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Analog in | single_source· Vendor | OEM-E6-10Mass air flow (VG) | ||
| Analog in | single_source· Vendor | OEM-E6-23Throttle position 1 (VTA) | ||
| Temp in | single_source· Vendor | OEM-E6-22Intake air temperature (THA) | ||
| Wideband Vgnd | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | OEM-E2-24O2 right rear (OXR2) | ||
| Digital in | single_source· Vendor | OEM-E4-2Starter signal (STA) | ||
| Analog in | single_source· Vendor | OEM-E4-8O2 left rear (OXL2) | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with