Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Install modifications
Steps on the car itself, outside the harness. Every harness for this car inherits them.
- Re-route the pressure-sensor vacuum hose to the intake manifoldrequired
Re-route the pressure sensor's (Mazda "EGR boost sensor", pin 4AE) vacuum hose directly to the intake manifold, bypassing the EGR boost solenoid. The stock ECU multiplexes baro + MAP through that solenoid: with it off the sensor reads atmosphere, with it energized it reads manifold. After re-routing the sensor reads MAP only, so the standalone needs its own barometric source — its onboard baro sensor if fitted, or a separate baro sensor on a spare analog input. (Alternative, not recommended: keep the hose stock and have the ECU energize the solenoid permanently via a low-side output switched with ignition; this costs an output.)
Why: With the solenoid off (its default) the sensor reads atmospheric pressure, not manifold pressure, so a standalone that uses this sensor as its MAP input would read the wrong value.
Where: EGR boost solenoid and the pressure sensor's vacuum hose (sensor signal 4AE).
Source: Justin Barrera — Miata NA/NB wiring corrections
Components
| Ref | Kind | Part | Exclude from BOM |
|---|---|---|---|
| ME360-C1 | connector | ||
| OEM-2 | connector | ||
| OEM-3 | connector | ||
| OEM-4 | connector | ||
| SP-0V | splice | ||
| SP-14V | splice | ||
| SP-GND | splice |
Create part
Cut list
Lengths need a layout (0 of 55 routed).
| Wire | From / To | Gauge | Signal |
|---|---|---|---|
| W1 | OEM-2-P / SP-14V-1 | 0.85 | ISC valve +14V feed |
| W2 | OEM-4-AF / SP-14V-1 | 0.85 | ECU power +14V (main relay) |
| W3 | OEM-4-D / SP-14V-1 | 0.85 | VVT oil-control solenoid +12V feed |
| W4 | SP-14V-1 / ME360-C1-15 | 0.85 | IGN +12V |
| W5 | SP-14V-1 / ME360-C1-64 | 0.85 | VBAT |
| W6 | OEM-3-A / SP-GND-1 | 0.85 | Power ground |
| W7 | OEM-3-B / SP-GND-1 | 0.85 | Power ground |
| W8 | OEM-4-A / SP-GND-1 | 0.85 | Power ground |
| W9 | SP-GND-1 / ME360-C1-10 | 0.85 | GROUND CHASSIS |
| W10 | SP-GND-1 / ME360-C1-61 | 0.85 | GROUND |
| W11 | SP-GND-1 / ME360-C1-89 | 0.85 | GROUND |
| W12 | SP-GND-1 / ME360-C1-90 | 0.85 | GROUND |
| W13 | OEM-4-O / SP-0V-1 | 0.5 | Signal ground |
| W14 | SP-0V-1 / ME360-C1-52 | 0.5 | SENSORS GROUND |
| W15 | SP-0V-1 / ME360-C1-84 | 0.5 | Sensor Ground |
| W16 | OEM-4-L / ME360-C1-45 | 0.5 | +5V sensor supply |
| W17 | OEM-3-Y / ME360-C1-80 | 0.5 | Crank position (CKP) |
| W18 | OEM-3-V / ME360-C1-22 | 0.5 | Cam position (CMP) |
| W19 | OEM-4-M / ME360-C1-53 | 0.5 | Knock sensor |
| W20 | OEM-3-F / ME360-C1-32 | 0.5 | Ignition 1 (coils 1+4, wasted spark) |
| W21 | OEM-3-I / ME360-C1-31 | 0.5 | Ignition 2 (coils 2+3, wasted spark) |
| W22 | OEM-2-A / ME360-C1-63 | 0.5 | Injector 1 |
| W23 | OEM-2-D / ME360-C1-4 | 0.5 | Injector 2 |
| W24 | OEM-2-G / ME360-C1-33 | 0.5 | Injector 3 |
| W25 | OEM-2-J / ME360-C1-3 | 0.5 | Injector 4 |
| W26 | OEM-4-X / ME360-C1-26 | 0.5 | Mass air flow (MAF) |
| W27 | OEM-4-V / ME360-C1-56 | 0.5 | Throttle position (TPS) |
| W28 | OEM-4-P / ME360-C1-86 | 0.5 | Coolant temperature (ECT) |
| W29 | OEM-2-B / ME360-C1-73 | 0.5 | Cooling fan relay |
| W30 | OEM-2-C / ME360-C1-12 | 0.5 | Condenser fan relay |
| W31 | OEM-2-K / ME360-C1-74 | 0.5 | A/C clutch relay |
| W32 | OEM-2-M / ME360-C1-44 | 0.5 | Fuel pump relay |
| W33 | OEM-3-H / ME360-C1-69 | 0.5 | Main relay |
| W34 | OEM-2-O / ME360-C1-37 | 0.5 | Fuel pump relay (non-immobiliser) |
| W35 | OEM-3-J / ME360-C1-16 | 0.5 | Front O2 heater |
| W36 | OEM-3-P / ME360-C1-39 | 0.5 | Rear O2 heater |
| W37 | OEM-2-Q / ME360-C1-28 | 0.5 | ISC valve low side |
| W38 | OEM-2-E / ME360-C1-42 | 0.5 | EGR valve |
| W39 | OEM-2-F / ME360-C1-72 | 0.5 | EGR valve |
| W40 | OEM-2-H / ME360-C1-43 | 0.5 | EGR valve |
| W41 | OEM-2-I / ME360-C1-13 | 0.5 | EGR valve |
| W42 | OEM-2-N / ME360-C1-75 | 0.5 | VTCS solenoid (intake butterflies) |
| W43 | OEM-2-R / ME360-C1-40 | 0.5 | Malfunction indicator lamp (MIL) |
| W44 | OEM-3-C / ME360-C1-9 | 0.5 | Purge solenoid valve |
| W45 | OEM-3-K / ME360-C1-58 | 0.5 | EVAP leak detection pump |
| W46 | OEM-3-O / ME360-C1-79 | 0.5 | Tachometer output |
| W47 | OEM-4-AE / ME360-C1-17 | 0.5 | Pressure sensor (Mazda: EGR boost sensor) |
| W48 | OEM-4-AA / ME360-C1-18 | 0.5 | Rear O2 signal |
| W49 | OEM-4-N / ME360-C1-57 | 0.5 | Intake air temperature (IAT) |
| W50 | OEM-3-T / ME360-C1-6 | 0.5 | Vehicle speed |
| W51 | OEM-3-S / ME360-C1-7 | 0.5 | Immobiliser |
| W52 | OEM-4-B / ME360-C1-8 | 0.5 | Brake switch |
| W53 | OEM-4-C / ME360-C1-5 | 0.5 | Power steering pressure switch |
| W54 | OEM-4-F / ME360-C1-62 | 0.5 | A/C request |
| W55 | OEM-4-H / ME360-C1-34 | 0.5 | Neutral switch |
Bill of materials
No parts in this harness.