Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
G5VOODOOPROV-A
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Injector | single_source· Vendor | OEM-A36-25Injector 2 direct (#2) | ||
| Injector | single_source· Vendor | OEM-A36-22Injector 2 port (#20) | ||
| Injector | single_source· Vendor | OEM-A36-14Injector 1 direct (#1) | ||
| Injector | single_source· Vendor | OEM-A36-12Injector 1 port (#10) | ||
| Power in | single_source· Vendor | SP-14V-1 | ||
| Digital in | single_source· Vendor | OEM-A33-27Ignition switch sense (IGSW, IG2 relay) | ||
| Shield | single_source· Vendor | SP-SHD-1 | ||
| Crank / cam | single_source· Vendor | OEM-A34-16Crank position (NE+) | ||
| Crank / cam | single_source· Vendor | OEM-A34-14VVT cam sensor exhaust bank 1 (EV1+) | ||
| Ignition | single_source· Vendor | OEM-A36-8Ignition coil 4 (IGT4) | ||
| Ignition | single_source· Vendor | OEM-A36-31Ignition coil 3 (IGT3) | ||
| Ignition | single_source· Vendor | OEM-A36-10Ignition coil 2 (IGT2) | ||
| Ignition | single_source· Vendor | OEM-A36-21Ignition coil 1 (IGT1) | ||
| Analog in | single_source· Vendor | OEM-A34-21Heated oxygen sensor (OX1B, rear) | ||
| Temp in | single_source· Vendor | OEM-A36-30Engine coolant temperature (THW) | ||
| Temp in | single_source· Vendor | OEM-A33-12Intake air temperature (THA, in MAF) | ||
| Analog in | single_source· Vendor | OEM-A35-31Accelerator pedal position 2 (VPA2) | ||
| Analog in | single_source· Vendor | OEM-A33-8A/C pressure sensor (ACP) | ||
| Analog in | single_source· Vendor | OEM-A33-22Mass air flow (VG) | ||
| Analog in | single_source· Vendor | OEM-A35-23Accelerator pedal position (VPA) | ||
| Analog in | single_source· Vendor | OEM-A36-28Throttle position 2 (VTA2) | ||
| Analog in | single_source· Vendor | OEM-A36-18Throttle position (VTA1) | ||
| Digital in | single_source· Vendor | OEM-A34-15VVT cam sensor intake bank 2 (VV2+) | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Analog in | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | OEM-A35-20Canister pressure sensor (PPMP) | ||
| Analog in | single_source· Vendor | OEM-A34-9Fuel pressure sensor (PR) | ||
| Analog in | single_source· Vendor | OEM-A34-11DI injector confirmation (IJF1) | ||
| Digital in | single_source· Vendor | OEM-A34-26VVT cam sensor intake bank 1 (VV1+) | ||
| Digital in | single_source· Vendor | OEM-A34-25VVT cam sensor exhaust bank 2 (EV2+) | ||
| 5V / 8V ref | single_source· Vendor | SP-5V1-1 | ||
| Analog in | single_source· Vendor | OEM-A34-20Manifold absolute pressure (PIM) | ||
| Ground | single_source· Vendor | SP-GND-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with