Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
EMUBLACK-Black
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Ignition | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-E9-50Knock sensor 1 (KNK1, front) | ||
| Analog in | single_source· Vendor | OEM-E9-47O2 sensor 2 (OX2, rear bank) | ||
| Temp in | single_source· Vendor | OEM-E9-44Coolant temperature (THW) | ||
| Wideband Vs | single_source· Vendor | not connected | ||
| Crank / cam | single_source· Vendor | OEM-E9-25Cam position 2 (G2) | ||
| Crank / cam | single_source· Vendor | OEM-E9-27Crank position (NE) | ||
| Analog in | single_source· Vendor | OEM-E10-20Diagnostic test 1 (TE1) | ||
| Digital in | single_source· Vendor | OEM-E9-23No.2 speed sensor (SP2+) | ||
| No data | single_source· Vendor | not connected | ||
| CAN high | single_source· Vendor | not connected | ||
| Power in | single_source· Vendor | SP-14V-1 | ||
| Ignition | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| Knock | single_source· Vendor | OEM-E9-49Knock sensor 2 (KNK2, rear) | ||
| Analog in | single_source· Vendor | OEM-E9-48O2 sensor 1 (OX1, front bank) | ||
| Analog in | single_source· Vendor | OEM-E9-43Throttle position (VTA1) | ||
| Wideband Ip | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E10-2No.1 speed sensor (SP1) | ||
| Crank / cam | single_source· Vendor | OEM-E9-26Cam position 1 (G1) | ||
| Wideband cal | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E9-3No.2 speed sensor return (SP2-) | ||
| No data | single_source· Vendor | not connected | ||
| CAN low | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | OEM-E9-41Sensor supply +5V (VCC) | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Analog in | single_source· Vendor | OEM-E9-24A/T oil temperature (OIL) | ||
| Analog in | single_source· Vendor | OEM-E9-62Manifold pressure (PIM) | ||
| Temp in | single_source· Vendor | OEM-E10-29Cat temperature sensor (CCO) | ||
| Wideband Vgnd | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | OEM-E9-45Intake air temperature (THA) | ||
| Digital in | single_source· Vendor | OEM-E10-21Fuel pump diagnostic (DI) | ||
| Analog in | single_source· Vendor | OEM-E10-12A/T overdrive disable 1 (OD1) | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with