Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
G5VOODOOPROV-A
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Injector | single_source· Vendor | OEM-E9-17Injector 4 (#40) | ||
| Injector | single_source· Vendor | OEM-E9-18Injector 3 (#30) | ||
| Injector | single_source· Vendor | OEM-E9-19Injector 2 (#20) | ||
| Injector | single_source· Vendor | OEM-E9-20Injector 1 (#10, front) | ||
| Power in | single_source· Vendor | SP-14V-1 | ||
| Digital in | single_source· Vendor | OEM-E10-1Ignition switch (IGSW) | ||
| Shield | single_source· Vendor | not connected | ||
| Crank / cam | single_source· Vendor | OEM-E9-27Crank position (NE) | ||
| Crank / cam | single_source· Vendor | OEM-E9-26Cam position 1 (G1) | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | OEM-E9-57Igniter trigger (IGT) | ||
| Analog in | single_source· Vendor | OEM-E10-15Electrical load sense (ELS) | ||
| Temp in | single_source· Vendor | OEM-E9-44Coolant temperature (THW) | ||
| Temp in | single_source· Vendor | OEM-E10-29Cat temperature sensor (CCO) | ||
| Analog in | single_source· Vendor | OEM-E9-62Manifold pressure (PIM) | ||
| Analog in | single_source· Vendor | OEM-E10-17Diagnostic test terminal (TT) | ||
| Analog in | single_source· Vendor | OEM-E10-9A/T 2nd-gear indicator (2) | ||
| Analog in | single_source· Vendor | OEM-E9-47O2 sensor 2 (OX2, rear bank) | ||
| Analog in | single_source· Vendor | OEM-E9-43Throttle position (VTA1) | ||
| Analog in | single_source· Vendor | OEM-E9-48O2 sensor 1 (OX1, front bank) | ||
| Digital in | single_source· Vendor | OEM-E9-23No.2 speed sensor (SP2+) | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Ground | single_source· Vendor | SP-GND-1 | ||
| Analog in | single_source· Vendor | OEM-E9-64TPS idle switch (IDL1) | ||
| Analog in | single_source· Vendor | OEM-E10-35Power steering switch (PS) | ||
| Analog in | single_source· Vendor | OEM-E10-3A/T kickdown switch (KD) | ||
| Analog in | single_source· Vendor | OEM-E10-18A/T manual mode select (M) | ||
| Digital in | single_source· Vendor | OEM-E9-25Cam position 2 (G2) | ||
| Digital in | single_source· Vendor | OEM-E10-2No.1 speed sensor (SP1) | ||
| 5V / 8V ref | single_source· Vendor | OEM-E9-41Sensor supply +5V (VCC) | ||
| Analog in | single_source· Vendor | OEM-E10-10A/T low-gear indicator (L) | ||
| Ground | single_source· Vendor | SP-GND-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with