Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Connectors
M190-A
face not drawn
| Point | Signal | Family | Evidence | Destination |
|---|---|---|---|---|
| Injector | single_source· Vendor | OEM-E10-23A/C clutch relay (ACMG) | ||
| Injector | single_source· Vendor | OEM-E9-16Injector 5 (#50) | ||
| Injector | single_source· Vendor | OEM-E9-19Injector 2 (#20) | ||
| Injector | single_source· Vendor | OEM-E9-8A/T lock-up solenoid (S3) | ||
| Injector | single_source· Vendor | OEM-E9-10A/T shift solenoid 1 (S1) | ||
| O2 narrowband | single_source· Vendor | OEM-E9-48O2 sensor 1 (OX1, front bank) | ||
| O2 narrowband | single_source· Vendor | OEM-E9-47O2 sensor 2 (OX2, rear bank) | ||
| 5V / 8V ref | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | OEM-E10-5Cat-temp warning light (EGW) | ||
| Injector | single_source· Vendor | OEM-E9-20Injector 1 (#10, front) | ||
| Injector | single_source· Vendor | OEM-E9-17Injector 4 (#40) | ||
| Analog in | single_source· Vendor | OEM-E9-77Starter signal (STA) | ||
| Digital in | single_source· Vendor | OEM-E10-20Diagnostic test 1 (TE1) | ||
| No data | single_source· Vendor | not connected | ||
| 5V / 8V ref | single_source· Vendor | OEM-E9-41Sensor supply +5V (VCC) | ||
| Injector | single_source· Vendor | OEM-E9-74EVAP purge VSV | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Sensor ground | single_source· Vendor | SP-0V-1 | ||
| Digital in | single_source· Vendor | OEM-E10-12A/T overdrive disable 1 (OD1) | ||
| No data | single_source· Vendor | not connected | ||
| No data | single_source· Vendor | not connected | ||
| CAN high | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | OEM-E10-22Fuel pump control (FPC) | ||
| Injector | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E10-19Diagnostic test 2 (TE2) | ||
| CAN low | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | OEM-E9-39ACIS intake VSV | ||
| Injector | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | not connected | ||
| Analog in | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Digital in | single_source· Vendor | OEM-E10-28A/T overdrive disable 2 (OD2) | ||
| Power in | single_source· Vendor | OEM-E10-33Battery constant (BATT) | ||
| CAN high | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | OEM-E9-33ISC stepper coil 3 (ISC3) | ||
| Analog in | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| CAN low | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | OEM-E10-6Check-engine light (W) | ||
| Injector | single_source· Vendor | OEM-E9-34ISC stepper coil 2 (ISC2) | ||
| Injector | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Injector | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected | ||
| Ignition | single_source· Vendor | not connected |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with